I am trying to update records based on the results of a query with a subquery.
The result set being produced shows the record of an item number. This result produces the correct ItemNo which I need to update. The field I am looking to update is an integer named Block.
When I run the update statement all records are updated and not the result set when I run the query by itself.
Below is the code I am using in an attempt to update the block column but it updates all records and not the ones which I need to have the Blocked field set to 1.
Update #items set Blocked = 1 Where Exists ( SELECT ItemNo=MAX(CASE rn WHEN 1 THEN ItemNo END) --,SearchNo --,COUNT(*)
[Code] ...
Why is the update changing each record? How can I change the update to choose the correct records?
I want to write a query that will cycle through the results and if it comes across another record that has a matching Table.ID I want to exclude that row from the result set.
I am not all too familiar with how to use either a Case or If..Else Statement within a Sql statement that would accomplish this.
I am trying to replace names found in 'xml' field name as hyperlinks, by matching with the names in database_tags.I am using the following function below, however the UDF is only recognizing one name from the XML fieldname data, instead of all the names present in the XML data.
ALTER FUNCTION [dbo].[ReplaceTags](@XML VARCHAR(MAX)) RETURNS VARCHAR(MAX) AS BEGIN
[code]...
for example, if the XML input data is the following: It consists of: BANKP, BCJA, BCJAM, BFTH, BFTH, and EMPOP.But the updated function is only recognizing two of names BFTH, BFTH, as hyperlinks, from the database_tags table.Is there a way to get the function to recognize more than one names as hyperlinks.
I'm trying to find a specific string (a name) and replace it with another inside of a VARCHAR(7000) field. Unfortunately, there are names like Ted and Ken that I'm trying to replace. I would like to leave words like Broken, admitted, etc... intact.
UPDATEtbl SETBody = LEFT(REPLACE(tbl.Body, pm.OldFirstName, p.FirstName), 7000) FROM Table tbl JOIN Person p ON p.PersonID = tbl.PersonID JOIN PersonMap pm ON pm.PersonID = p.PersonID AND LEN(pm.OldFirstName) > 2 WHEREtbl.Body LIKE '%[^a-z]'+pm.OldFirstName+'[., ]%
'The problem I'm running into is that the '[, ]%' in the LIKE excludes any record that ends with the FirstName because it is requiring either a space, comma or period after the name. Is there some way to add an empty string to the list of acceptable characters as that would cover any scenario in the data? I would prefer not to add all characters except space, comma and period, but I guess I could do that.
create table dbo.#Status( ID varchar(50), Status varchar(50), EffectiveStartDate datetime, EffectiveEndDate datetime, Is_Current bit
[code].....
I want result as the attached image.
Create table query for result is: CREATE TABLE dbo.#Result( ID varchar(50), Fee varchar(100), Bill varchar(50), A_Date date, B_Date date, Status VARCHAR(50), EffectiveStartDate datetime, EffectiveEndDate datetime )
I have tables in my database, tblNames1, tblNames2, tblNames3, and a main addresses table (currently empty). Once I've imported the address data I need to match the addressIDs in the names tables to the Primary ID in the address table based on the values of a field CompanyName (which is common to all the tables) My issue is that I have a huge CSV file with the master address information but obviously SQL server needs to assign foreign keys so the names tables can linked to corresponding rows in address table. It's a a many to 1 relationship as their will be one address with multiple name entries. All the names are normalized so everything can be matched up...
I need to send the result of a procedure to an update statement.Basically updating the column of one table with the result of aquery in a stored procedure. It only returns one value, if it didnt Icould see why it would not work, but it only returns a count.Lets say I have a sproc like so:create proc sp_countclients@datecreated datetimeasset nocount onselect count(clientid) as countfrom clientstablewhere datecreated > @datecreatedThen, I want to update another table with that value:Declare @dc datetimeset @dc = '2003-09-30'update anothertableset ClientCount = (exec sp_countclients @dc) -- this line errorswhere id_ = @@identityOR, I could try this, but still gives me error:declare @c intset @c = exec sp_countclients @dcWhat should I do?Thanks in advance!Greg
How to replace DateTime field with null value in SQL 2005 server I create a stored procedure aa, It works well, but sometimes I hope to replace CreateDate field with null value,I don't know how to doIt seems that datetime type is not null value create aa @CreateDate DatetimeAsUpdate cw set CreateDate=@CreateDate
create table #task(TaskId bigint unique, Name varchar(2000)) insert into #task values(1, 'Text Text Text Text Text Text Text <<Name>> Text Text Text <<Salary>>') insert into #task values(2, 'Text Text Text <<Name>> Text Text Text Text <<Company>> Text Text Text <<Salary>> Text Text Text') -- select * from #task
[Code] ....
Now I need to create an inline function who resolve the task name with appropriate values and return me the resolved task name
select * from fn_TaskResolver(1, 'Text Text Text Text Text Text Text <<Name>> Text Text Text <<Salary>>')
I try this function but its return multiple rows as i just want to return one row. as I have big data set so i don't want to use scaler or Multi Line function.
create function fn_TaskResolver(@TaskId bigint, @name varchar(2000) Return table as return ( with data as
SELECT m.lID FROM Message m inner join Message_Cc mCC on m.lID=mCC.lMessage and mCC.lOfficeRecipient = 200321 INNER JOIN UserRole d on mCC.szRecipient=d.szRoleName inner Join Map_UserAtOfficeToRole a2 on a2.lUserRole = d.lid AND d.nRecordStatus = 1
[Code] ....
If I run this without the LEFT OUTER JOIN and the is null statement I get 648 rows. But If I include it I get 0 rows. I can't understand why I get 0 rows with the outer join.
I'm trying to replace special characters in SQL SERVER and all the solutions for this RDBMS that I found, it uses loops and the source of my data it's in Oracle. in ORACLE and they use REGULAR EXPRESIONS to solve it..Do you know what its the better option to replace special characters? Using loops in SQL SERVER or REGULAR EXPRESSIONS in ORACLE ?
how we can replace the multiple values in a single select statement? I have to build the output based on values stored in a table. Please see below the sample input and expected output.
I need to create a function that replaces the data in a column with an 'X' based on the LEN of the data in the column. I created one that does a replacement, but it fills the column based on the max data length, and not the current length of the string or integer. An example of what I'm trying to accomplish.
Original data in a varchar(30) column: thisisavalue thisisanothervalue thisisanothervalueagain shortval
replaced with xxxxxxxxxx xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxxxxxx
My current function is replacing the data like this: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Table 1 --------- id | Name --------- 1 | John 2 | Debbie 3 | Kim 4 | Mary
Table 2 --------- id | Name --------- 654 | John 415 | Debbie 68 | Kim 289 | Mary
Table 2 id's values are all messed up and I need to replace them so that they look exactly like in Table one, my guess is that query will have to replace value of "Id" based on the "Name" column, I hope I made myself clear.
Hey All, I am trying to convert cursor based stored proc in to set based simple statements stored proc. As this stored proc has created alot of performance issues. I am confuse now as I spent my most of time creating this stored proc. Please advise how can I convert this stored proc into set base simple statment.
Thanks in advance.
SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO
ALTER Procedure [SampleStoredProc] @Var1varchar(20), @Var2varchar(3), @Var3 varchar(2) = 'Dummy' As
fetch next from mtcursor into @TableName, @FieldName, @FieldSelect, @FieldTitle, @sequence, @extraCriteria, @title, @ConvertRoutine if @@fetch_status <> 0 set @loopCtrl2 = 1
if (@TableName <> @holdTable) or (@extraCriteria <> @holdCriteria) or (@title <> @holdTitle) or (@loopCtrl2 = 1) begin
set @tableBuild = @tableBuild + ')' set @insertSQL = ' declare mtcursor2 cursor for select FieldName, FieldTitleTxt, ExtraUpdateMatchTxt, PullForUpdateInd, PullForAddInd, PullForDeleteInd, PullForAnyUpdateInd from MyTable1 where TableName = ''' + @holdTable + ''' and ExtraCriteriaTxt = ''' + @holdCriteria + ''' and PageTitleTxt = ''' + @holdTitle + ''' and Column1 = ''' + @Var2 + ''' order by FieldDisplaySequenceNbr
declare @FieldName varchar(50) declare @FieldTitle varchar(50) declare @ExtraUpdateMatch varchar(500) declare @PullUpdate bit declare @PullAdd bit declare @PullDelete bit declare @PullAnyUpdate bit
open mtcursor2 fetch next from mtcursor2 into @FieldName, @FieldTitle, @ExtraUpdateMatch, @PullUpdate, @PullAdd, @PullDelete, @PullAnyUpdate
WHILE (@@fetch_status = 0) begin
if substring(@FieldTitle,1,1) = ''#'' set @FieldTitle = substring(@FieldTitle,2,len(@FieldTitle) - 1) else set @FieldTitle = '''''''' + @FieldTitle + ''''''''
if @PullAnyUpdate = 1 begin exec (''INSERT MyTable2 SELECT ''''' + @Var1 + ''''', A.UnitNbr, ''''' + @holdTitle + ''''', '' + @FieldTitle + '', A.'' + @FieldName + '', B.'' + @FieldName + '', ''''U'''' from #tempTable A left join #tempTable B on B.UnitNbr = A.UnitNbr and B.Val1 = ''''U'''' '' + @ExtraUpdateMatch + '' where A.Val1 = ''''O'''' and B.Val1 = ''''U'''''') end else begin if @PullUpdate = 1 exec (''INSERT MyTable2 SELECT ''''' + @Var1 + ''''', A.UnitNbr, ''''' + @holdTitle + ''''', '' + @FieldTitle + '', A.'' + @FieldName + '', B.'' + @FieldName + '', ''''U'''' from #tempTable A left join #tempTable B on B.UnitNbr = A.UnitNbr and B.Val1 = ''''U'''' '' + @ExtraUpdateMatch + '' where A.Val1 = ''''O'''' and B.Val1 = ''''U'''' and ((A.'' + @FieldName + '' <> B.'' + @FieldName + '') or (A.'' + @FieldName + '' is null and B.'' + @FieldName + '' is not null) or (A.'' + @FieldName + '' is not null and B.'' + @FieldName + '' is null)) '') end
if @PullAdd = 1 exec(''INSERT MyTable2 SELECT ''''' + @Var1 + ''''', UnitNbr, ''''' + @holdTitle + ''''','' + @FieldTitle + '', ''''n/a'''', '' + @FieldName + '', ''''A'''' from #tempTable A where Val1 = ''''A'''''') if @PullDelete = 1 exec(''INSERT MyTable2 SELECT ''''' + @Var1 + ''''', UnitNbr, ''''' + @holdTitle + ''''','' + @FieldTitle + '', '' + @FieldName + '', ''''n/a'''', ''''D'''' from #tempTable A where Val1 = ''''D'''''') fetch next from mtcursor2 into @FieldName, @FieldTitle, @ExtraUpdateMatch, @PullUpdate, @PullAdd, @PullDelete, @PullAnyUpdate end
close mtcursor2 deallocate mtcursor2'
exec (@tableBuild + ' insert into #tempTable select ' + @selectlist + ' from ' + @holdTable + ' where Id = ' + '''' + @Var1 + '''' + @holdCriteria + @insertSQL)
set @selectlist = 'Val1, Val2,' + @sequence + ' as UnitNbr' set @tableBuild = 'Create table #tempTable (Val1 varchar, Val2 int, UnitNbr varchar(20)' end
if @loopCtrl2 = 1 set @loopCtrl1 = 1 end
close mtcursor deallocate mtcursor
Delete from MyTable2 where ltrim(rtrim(PreviousValueTxt)) = ltrim(rtrim(EndorsedValueTxt)) and ActionTxt='U' and ID=@Var1 declare deletecursor cursor for select distinct PageNm from MyTable2 where Id = @Var1 and ActionTxt = 'U'
open deletecursor
fetch next from deletecursor into @PageName
while @@fetch_status = 0 begin if (SELECT count(*) from MyTable2 where Id = @Var1 and PageNm = @PageName and ActionTxt = 'U' and PreviousValueTxt <> EndorsedValueTxt ) = 0 DELETE FROM MyTable2 where Id = @Var1 and PageNm = @PageName and ActionTxt = 'U' fetch next from deletecursor into @PageName end
close deletecursor deallocate deletecursor
declare convertcursor cursor for select a.PreviousValueTxt, a.EndorsedValueTxt, A.EntrySequenceNbr, A.ActionTxt, b.ConversionRoutineTxt from MyTable2 a inner join MyTable1 b on a.PageNm = b.PageTitleTxt and a.FieldNm = b.FieldTitleTxt and b.ConversionRoutineTxt <> '' where a.Id = @Var1
open convertcursor
fetch next from convertcursor into @PrevValue, @NewValue, @Sequence, @ActionTxt, @ConvertRoutine
while @@fetch_status = 0 begin set @ConvertSQL = 'declare @PrevConverted varchar(50) declare @NewConverted varchar(50)' set @ConvertSQL = @ConvertSQL + ' declare @ConvertInput varchar(50) '
set @ConvertSQL = @ConvertSQL + ' declare @Var3 varchar(2) ' set @ConvertSQL = @ConvertSQL + ' set @Var3 = ''' + @Var3 + ''''
if @ActionTxt = 'A' set @ConvertSQL = @ConvertSQL + ' set @PrevConverted = ''' + @PrevValue + '''' else begin set @ConvertSQL = @ConvertSQL + ' set @ConvertInput = ''' + @PrevValue + '''' set @ConvertSQL = @ConvertSQL + ' set @PrevConverted = (' + @ConvertRoutine + ')' end if @ActionTxt = 'D' set @ConvertSQL = @ConvertSQL + ' set @NewConverted = ''' + @NewValue + '''' else begin set @ConvertSQL = @ConvertSQL + ' set @ConvertInput = ''' + @NewValue + '''' set @ConvertSQL = @ConvertSQL + ' set @NewConverted = (' + @ConvertRoutine + ')' end
set @ConvertSQL = @ConvertSQL + ' update MyTable2 set PreviousValueTxt = @PrevConverted, EndorsedValueTxt = @NewConverted where EntrySequenceNbr = ''' + @Sequence + ''''
exec (@ConvertSQL)
fetch next from convertcursor into @PrevValue, @NewValue, @Sequence, @ActionTxt, @ConvertRoutine end
Create table #pageSeqTable (PageTitle varchar(50), PageSeq int) insert into #pageSeqTable select distinct PageTitleTxt, PageDisplaySequenceNbr from MyTable1 where Column1 = @Var2
select PageNm, RowNumber, FieldNm, PreviousValueTxt, EndorsedValueTxt, ActionTxt from MyTable2, #pageSeqTable b where Id = @Var1 and PageNm = b.PageTitle order by b.PageSeq, RowNumber, ActionTxt desc, EntrySequenceNbr
select @effDate = convert(char,EffectiveDate,101), @transEffDate = convert(char,TransactionEffectiveDt,101), @expDate = convert(char,LastTransactionEffectiveDt,101), @policyStatus = PolicyStatusCd, @reasAmendDesc = ReasonAmendedDes, @policyNumber = PolicyNumber, @riskState = StateName, @AmendPrem = convert(money,PremiumAmount) from SHPlaninfo A, SHSeleReasonAmended B, SHSeleStateCode C where Id = @Var1 AND Val2 = (select max(Val2) from SHPlanInfo where Id = @Var1) AND B.ReasonAmendedCd = A.ReasonAmendedCd AND C.StateCode = A.RiskState Select @PriorPrem = convert(money,PremiumAmount) FROM SHPlanInfo WHERE Id = @Var1 and Val2 = '0' Set @PremDiff = @AmendPrem - @PriorPrem
CREATE Table #Table1 ( ID INT, Name VARCHAR(50), Class VARCHAR(10) ) INSERT INTO #Table1 Select 1, 'name1', 'a' UNION ALL Select 2, 'name1', 'a' UNION ALL
[Code] ....
Is it possible to have each name and its corresponding class in a single line separated by commas to give a result like the one below in #table2 ?
CREATE Table #Table2 ( ID INT, CommaSeparated VARCHAR(100) ) INSERT INTO #Table2 Select 1, 'name1, a' UNION ALL
[Code] ...
What I have
Select * FROM #Table1
Final Result Select * FROM #Table2
Note that I still want to see all the IDs regardless.
If that is not possible to see all the IDs, I think the results below in #Table3 should suffice.
CREATE Table #Table3 ( CommaSeparated VARCHAR(100) ) INSERT INTO #Table3 Select 'name1, a' UNION ALL Select 'name2, b, c, d' UNION ALL Select 'name3, e, f' Select * FROM #Table3
I wanted to know the best way to achieve the following results. I have a table that I need output sequential range of vouchers in a table. For instance I have the following data in a column called vouchers. The output will consist of a years worth of vouchers, so voucher numbers may contain gaps and so the need to have a sequential range that has a From and To output. The query needs to know the min and max within that numerical range and then output the next min and max range until it gets to the end.
The data looks like: ABCD-001869202 ABCD-001869203 ABCD-001869204 ABCD-001869205 ABCD-001869209 ABCD-0018692010 ABCD-0018692011 ABCD-001869309 ABCD-001869310 ABCD-001869311 ABCD-001869312 ABCD-001869313 ABCD-001869314
Desired out put:
From To ABCD-001869202 ABCD-001869205 ABCD-001869209 ABCD-0018692011 ABCD-001869309 ABCD-001869314
I have tried the following, but it does not quite do what I need it to do, so not sure if I am taking the right approach:
SELECT voucher vouchers,right(voucher, charindex('-', voucher) + 3) voucher INTO #tempVoucher FROM LEDGERJOURNALTRANS where TRANSDATE between '10/1/2013' and '7/31/2014' and VOUCHER like 'APIN%'
I am trying to produce a query result that will be using a Case statement to determine values based on scores in a table for each row. The result needs to be exported to be used to upload to a state reporting website. My problem is that the state requires in the CSV file that is uploaded a lot of fields that we do not actually have in the database table we are creating the result set from. After I receive my result set using the Case statement, is there a way to add additional columns that don't actually exist in a table so I can export directly from SQL?
I would like to pull data from two seperate columns based on the vaule for MakeFlag. So if MakeFlag = 0 I would like the description to show but anything else I would like catalog description to show up.
I am unable to update the data using record by record below scenario.
Required output:
patient will able to Admit/Re-admit multiple times in hospital, if a patient readmitted multiple times in hospital after the first visit, first visit record will get Re-admission=0 and Index=1. This visit should cal Index_Admission of that patient. using this index_admission should calculate the 30-day readmission.
Current Output:
Calculation: From index_admission discharge date to next admit_visit date,
1) if the diff is having less than 30 days, readmission=1 and Index=0
else readmission=0 and Index=1 should be update.
For checking this every time should check using the latest index_admission discharge_date.
To get this result i written below logic, but it's updating readmission=0 and Index=1 after 30-day post discharge of using first index admission.
UPDATE Readmission SET Index_AMI = (CASE WHEN DATEDIFF(DD, (SELECT Sub.Max_Index_Dis FROM (SELECT Patient_ID, MAX(Discharge_Date_Time) Max_Index_Dis FROM Readmission WHERE Index_AMI = 1 AND FPR.Patient_ID = Patient_ID GROUP BY Patient_ID) Sub) , FPR.Admit_Date_Time) between 0 and 31 THEN 0 ELSE 1 END),
I want to achieve something like below. It should subtract the '13' row to '6' row and provide another column with the result. the '6' and '13' category code share the same Key.
For example we've got a row from [Formula_Calc] table 'F1+F3' as a string that needs to be transformed as 240+160=400
The below code works for the above example but if I pick 'F11+F3' instead , returns 2561 which comes from 2401+16. Probably replaces F1 value instead of F11 and adds 1st digit (1) if I got it right ...
DECLARE @formula NVARCHAR(100); DECLARE @Total NVARCHAR(100); SET @formula = 'F11+F3';
SELECT @formula = REPLACE(@formula,RowNo,Total) FROM [Totals]
I have a table called BidItem which has another table calledBidAddendum related to it by foreign key. I have another table calledBidFolder which is related to both BidItem and BidAddendum, based on acolumn called RefId and one called Type, i.e. type 1 is a relationshipto BidItem and type 2 is a relationship to BidAddendum.Is there any way to specify a foreign key that will allow for thedifferent types indicating which table the relationship should existon? Or do I have to have two separate tables with identical columns(and remove the type column) ?? I would prefer not to have multipleidentical tables.
I know there has to be a way to do this, but I've gone brain dead. Thescenario..a varchar field in a table contains a date range (i.e. June 1,2004 - June 15, 2004 or September 1, 2004 - September 30, 2004 or...). Theusers have decided thats a bad way to do this (!) so they want to split thatfield into two new fields. Everything before the space/dash ( -) goes intoa 'FromDate' field, everything after the dash/space goes into the 'ToDate'field. I've played around with STRING commands, but haven't stumbled on ityet. Any help at all would be appreciated! DTS?
I am trying to create a SSIS package that will create a csv of a dataset for daily events in the database. However there will be days that there was no activity and thus an empty dataset. The package still runs fine but I want to stop the package if the dataset is empty.
FLOW:
DATA FLOW task: get daily data and put in CSV file
FTP TASK: upload the file to FTP server
MAIL/Copy file task: Move the file and then send a confirmation mail on task completion status.
Pretty simple and it all works great, I do have a few complexities in there. What I would like to add and I am at a loss is at the beginning, if the OLE DB Task resultset is empty then move to Mail Task otherwise process normally. I have tried conditional split, derived columns, the only thing I haven't tried in Script task and am not sure about that yet.
