I have date field in table and data contain 2014-08-09 11:13:03.340
when I use smalldatefield I am getting 2014-08-09 11:13:00 I should have got 2014-08-09 11:13:03
Why the 03 is trimming in smalldatefield.
how do I use select query to get 2014-08-09 11:13:03 from original Date records
I have the following code.
SELECT _bvSerialMasterFull.SerialNumber, _bvSerialMasterFull.SNStockLink, _bvSerialMasterFull.SNDateLMove, _bvSerialMasterFull.CurrentLoc,
_bvSerialMasterFull.CurrentAccLink, _bvSerialMasterFull.StockCode, _bvSerialMasterFull.CurrentAccount, _bvSerialMasterFull.CurrentLocationDesc,
_bvSerialNumbersFull.SNTxDate, _bvSerialNumbersFull.SNTxReference, _bvSerialNumbersFull.SNTrCodeID, _bvSerialNumbersFull.SNTransType,
_bvSerialNumbersFull.SNWarehouseID, _bvSerialNumbersFull.TransAccount, _bvSerialNumbersFull.TransTypeDesc,
[code]...
However, as you can see, the original select query is run twice and joined together.What I was hoping for is this to be done in the original query without the need to duplicate the original query.
I need to select records in column that start with '% ' -- %space e.g. column A = % mytest
I tried select column name with like operator but it select records who start with % and ignore space
select columnA from table where columna like '% %';
So let's say I have a table Orders with columns: Order# and ReceiptDate. Order#'s may be duplicated (Could have same Order# with different ReceiptDate). I want to select Order#'s that go back 6 months from the last ReceiptDate for each Order#.
I can't just do something like:
SELECT *
FROM Orders
WHERE ReceiptDate >= add_months(date,-6)
because there could be Order#'s whose last ReceiptDate was earlier than 6 months ago. I want to capture all of the instances of each Order# going back 6 months from each last ReceiptDate relative to each Order#.
I am trying to add multiple records to my table (insert/select).
INSERT INTO Users
( User_id ,
Name
)
SELECT ( SELECT MAX(User_id) + 1
FROM Users
) ,
Name
But I get the error:
Violation of PRIMARY KEY constraint 'PK_Users'. Cannot insert duplicate key in object 'dbo.Users'.
But I am using the max User_id + 1, so it can't be duplicate
This would insert about 20 records.
Why the error?
Here's my statement below. What I'm trying to get is joining the name column in master.sys.databases with a sub query for the database name, file location and backup start date from the MSDB database. The reason for this, if a new database has never been backed up, It should be returning as a NULL value, which is my goal. However, I'm getting multiple results for the backups.
select CONVERT(CHAR(100), SERVERPROPERTY('Servername')) AS Server,a.name,File_Location=b.physical_device_name,backup_start_date=max(backup_start_date)
from master.sys.databases a
left join(select c.database_name,backup_start_date=max(backup_start_date),b.physical_device_name
from msdb.dbo.backupmediafamily b join msdb.dbo.backupset c on c.media_set_id=c.backup_set_id
where c.type='D'
[Code] .....
create table [where] ([where] char(5))
go
insert into [where] ([where]) values ('where')
go
select [where] from [where] where [where] = 'where'
go
drop table [where]
go
I am trying to select records based on a year.
DECLARE @Date
SET @Date = 2012
DECLARE @Year int
SET @Year = (SELECT DATEPART(yyyy,@Date))
SELECT @Year AS Year
--SELECT *
-- FROM [Orders].[dbo].[Orders] od
-- WHERE .Orderl_Date < @Date;
----WHERE DATEPART(yyyy,@Date)= @Year
----WHERE DATEPART(yyyy,od.Order_Date)= @ArchiveYear
DECLARE @Date
SET @Date = 2012
DECLARE @Year int
SET @Year = (SELECT DATEPART(yyyy,@Date))
SELECT @Year AS Year
--SELECT *
-- FROM [Orders].[dbo].[Orders] od
-- WHERE .Orderl_Date < @Date;
----WHERE DATEPART(yyyy,@Date)= @Year
----WHERE DATEPART(yyyy,od.Order_Date)= @ArchiveYear
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
I am trying to build a select statement that will
1). find records where a duplicate field exists.
2.) show the ItemNo of records where the Historical data is ' '.
I have the query which shows me the duplicates but I'm stuck when trying to only show records where the Historical field = ' '.
Originally I thought I could accomplish this goal with a sub query based off of the original duplicate result set but SQL server returns an error.
Below you will find a temp table to create and try in your environment.
create table #Items
(
ItemNovarchar (50),
SearchNo varchar (50),
Historical int
[Code] ....
Ultimately I need a result set that returns 'ATMR10 MFZ N', and 'QBGFEP2050 CH DIS'.
I have a dynamic SQL query that uses various indexes and views.
When a user wants to filter records based on last one day, last one week, last 30 days ...etc.. i use the following code:
@date is an integer.
begindate is datetime format.
begindate > cast(((select dateadd(d,@Date,GETDATE()))) as varchar(20))
The above code slows my query performance by at least 400%!
Would it be faster to add a computed column to my table, using the suggested method in the link below?
[URL] ....
Then i could add an indexed view to improve performance, or can this be done another way?
I have some data in the following format;
MYTABLE
DOC_NO // REV_NO // FILE_NAME
ABC123 // A // abc123.pdf
ABC123 // B // abc123_2.docx
ABC124 // A // abc124.xlsx
ABC124 // A // -
ABC125 // A // abc125.docx
ABC125 // C // abc125.jpg
ABC125 // C // abc125.docx
ABC125 // C // -
ABC126 // 0 // -
ABC127 // A1 // abc127.xlsx
ABC127 // A1 // abc127.pdf
I'm looking to select all rows where the DOC_NO and REV_NO appear only once.(i.e. the combination of the two values together, not any distinct value in a column)
I have written the sub query to filter the correct results;
SELECT DOC_NO, REV_NO FROM [MYTABLE]
GROUP BY DOC_NO, REV_NO
HAVING COUNT(*) =1
I now need to strip out the records which have no file (represented as "-" in the FILE_NAME field) and select the other fields (same table - for example, lets just say "ADD1", "ADD2" and "ADD3")
I was looking to put together a query like;
SELECT DOC_NO, REV_NO, FILE_NAME, ADD1, ADD2, ADD3 FROM [MYTABLE]
WHERE FILE_NAME NOT LIKE '-' AND DOC_NO IN
(SELECT DOC_NO, REV_NO FROM [MYTABLE]
GROUP BY DOC_NO, REV_NO
HAVING COUNT(*) =1)
But of course, DOC_NO alone being in the subquery select is not sufficient, as (ABC125 /A) is a unique combination, but (ABC125 /C) is not, but these results would be pulled in.
I also cannot simply add an additional "AND" clause on its own to make sure the REV_NO value appears in the subquery, because it is highly repetitive and would have to specifically match the DOC_NO)
What is the easiest way of ensuring that I only pull in the records where both the DOC_NO and REV_NO (combination) are unique, or is there a better way of putting this select together altogether?
I have a table which is updated daily using a MERGE statement. As records are insert, updated and deleted, I am saving the OUTPUT from the MERGE statement into a history table with a timestamp and action$ column appended to the record.
Using this history table, I'd like to rebuild the data based on specific past date. I was able to create a stored procedure that inspects each record in the history table and apply it to the data in a temp table. The stored procedure solution uses multiple queries to rebuild the data at a point in time. I was curious if there was an easier and more efficient solution using a table function.
I have a select query that results all the dbs and their several backup dates×. Howover I only need the latest backup dates for each of the db.How can I write that in tsql?
View 5 Replies View RelatedThere are many duplicate records on my data table because users constantly register under two accounts. I have a query that identify the records that have a duplicate, but it only shows one of the two records, and I need to show the two records so that I can reconcile the differences.The query is taken from a post on stack overflow. It gives me 196, but I need to see the 392 records.
How to identify the duplicates and show the tow records without having to hard code any values, so I can use the query in a report, and anytime there are new duplicates, the report shows them.
SELECT
[groom_first_name]
,[groom_last_name]
,[bride_first_name]
,[bride_last_name]
[code]....
I have created a stored procedure with dynamic query and using sp_executesql . stored procedure is work fine.
Now i want to call stored procedure in select statement because stored procedure return a single value.
I search on google and i find openrowset but this generate a meta data error
So how i can resolve it ???
How to convert float to timestamp in single select query
E.g., i have float as 1.251152515236 ,
I want to convert this to datetime and from datetime to timestamp... i.e. 26:11:00
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120))
insert into #temptable
SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10
--column name
declare @cname varchar(30)
[code]...
Hi Friends,
I have created the procedure in sql server 2005 for retriving email addresses from table based on date_expiry and concatinating all email addresses in to @tolist as shown below
Declare @tolist varchar(8000)
set @tolist = ''SELECT @tolist = @tolist + ';' + COALESCE(email, '')
FROM awc_register
WHERE DATEDIFF(day, date_expiry, GETDATE())='3'print @tolist
set @tolist = substring(@tolist, 2, len(@tolist))
and I passed this @tolist to another procedure which should send mails for email addresses present in @tolist variable.
Problem is I need to send the mail to each email address separatley.( not bulkly)
Thanks,
My goal is to select values from the same date range for a month on month view to compare values month over month. I've tried using the date trunc function but I'm not sure what the best way to attack this is. My thoughts are I need to somehow select first day of every month + interval 'x days' (but I don't know the syntax).In other words, I want to see
Select
Jan 1- 23rd
feb 1-23rd
march 1-23rd
april 1-23rd
,value
from
table
Presently using CONVERT(VARCHAR(11), [ExpiryDate], 100) to get close to the correct format.Only stumbled across this by accident so am assuming there might be better hidden 'treasures' .Formatting dates seems to be my biggest time-consuming activity and I just don't seem to get better at it!
View 4 Replies View RelatedThis is what I have for a query but i would like to take the year off. is there a way i can just have the month and day without the year attached?
View 3 Replies View RelatedI have 2 tables, one is table A which stores Resources Assign to work for a certain period. The structure is as below
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
The table B stores the item process time. The structure is as below
Item ProcessStartDate ProcessEndDate
V 2015-04-01 09:30:10.000 2015-04-01 09:34:45.000
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
A 2015-04-01 16:40:10.000 2015-04-01 16:42:45.000
B 2015-04-01 16:43:01.000 2015-04-01 16:45:11.000
C 2015-04-01 16:47:00.000 2015-04-01 16:49:25.000
I need to select the item which process in 2015-04-01 16:40:00 and 2015-04-01 17:30:00. Beside that I need to know how many resource is assigned to process the item in that period of time. I only has the start date is 2015-04-01 16:40:00 and end date is 2015-04-01 17:30:00. How I can select the data from both tables. There is no need for JOIN, just seperate selections.
Another item process time is in 2015-04-01 10:00:00 and 2015-04-04 11:50:59.
The result expected is
Table A
Name StartDate EndDate
Alan 2015-04-01 16:30:00.000 2015-04-02 00:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
A 2015-04-01 16:30:10.000 2015-04-01 16:32:45.000
B 2015-04-01 16:33:01.000 2015-04-01 16:35:11.000
C 2015-04-01 16:37:00.000 2015-04-02 16:39:25.000
Scenario 2 expected result
Table A
Name StartDate EndDate
Tan 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Max 2015-04-01 08:30:00.000 2015-04-01 16:30:00.000
Table B
Item ProcessStartDate ProcessEndDate
Q 2015-04-01 10:39:01.000 2015-04-01 10:41:11.000
W 2015-04-01 11:44:00.000 2015-04-01 11:46:25.000
I'm looking for a way of taking a query which returns a set of date time fields (probable maximum of 20 rows) and looping through each value to see if it exists in a separate table.
E.g.
Query 1
Select ID, Person, ProposedEvent, DayField, TimeField
from MyOptions
where person = 'me'
Table
Select Person, ExistingEvent, DayField, TimeField
from MyTimetable
where person ='me'
Loop through Query 1 and if it finds ANY matching Dayfield AND Timefield in Query/Table 2, return the ProposedEvent (just as a message, the loop could stop there), if no match a message saying all is fine can proceed to process form blah blah.
I'm essentially wanting somebody to select a bunch of events in a form, query 1 then finds all the days and times those events happen and check that none of them exist in the MyTimetable table.
I have a table that stores Terminal ID, Product Name, Cost and Effective Date. I need to generate query that will produce record set with start effective date and end date based on terminal and product. Table has over million records. In example below you could see table structure/data and desired outcome.
SELECT fmc_terminal, fmc_date = CAST(d. fmc_date AS DATETIME)
,d.fmc_prodlnk, d. fmc_cost
INTO #TestTable
FROM (
SELECT 1, '2014-12-03 00:04:00.000','A', 2.25 UNION ALL
[Code] ....
Expected outcome
fmc_terminalfmc_prodlnkfmc_cost StartDateEndDate
1A2.25 NULL2014-12-03 00:04:00.000
1A2.26 2014-12-03 00:04:00.0002014-12-03 11:33:00.000
And so on….
using below code to replace the city names, how to avoid hard coding of city names in below query and get from a table.
select id, city,
LTRIM(RTRIM(REPLACE(REPLACE(REPLACE(REPLACE(REPLACE(city,
'JRK_Ikosium', 'Icosium'), 'JRK_Géryville', 'El_Bayadh'),'JRK_Cirta', 'Constantine'),'JRK_Rusicade', 'Philippeville'),
'JRK_Saldae', 'Bougie')))
New_city_name
from towns
I have a table (ScriptTable) which holds a groupID Nvarchar(10) ,SQLStatement Nvarchar (150)
Table Fields =
GroupID SQLStatement
1234 Select CUSTNO, CUSTNAME,CUSTADDRESS from custtable where customerNo = 'AB123'
9876 Select CUSTNO, CUSTNAME,CUSTADDRESS from custtable where customerNo = 'XY*'
What I need is to take each select statement in turn and add the data into a temp table. I can use any method but it needs to be the most efficient. There can also be a varying number of select statements to run through each time my job is run.
I have a table like the following (with much more data, but the concept is the same) with Dates and Actions for People and a column called Action with beginning Dates and end dates.
(I attached a picture because I could not figure out how to Format it)
begin Date end Date Name
begin 2014-10-15 end 2014-10-31 phil
begin 2014-09-18 end 2014-09-30 phil
begin 2014-08-21 end 2014-08-23 John
I need the query to be like this. The idea is to have the query grab the next 'END' not all Ends, which my attempts have done i.e. I get not just the closest end to the begin date, but ALL Ends with the same Person.
I Need it to look like this:
begin Date end Date Name
begin 2014-10-15 end 2014-10-31 phil
begin 2014-09-18 end 2014-09-30 phil
begin 2014-08-21 end 2014-08-23 John
There can be different People so the query Needs to return the beginning and end rows for the Person in sequential order.I can't figure out how to select only the 'next' end. My query always gets 'end' values that have a 'begin'. I
I have two tables, customers and appointments.
I want to bulk insert records for a date range and a day of the week.
For example, John Smith has an appointment on every monday for the next three months. How do I accomplish this?
I have a table and am usuing ASP to query the database, the connection is to a MS Access table at the moment but am working to convert to SQL Server.
Question:
I need to select the last 20 records, by a date field, then from those 20 records select the 10 lowest scores.
Example is a member logs on an that member has say 80 total records in the table. Then I need to select the last 20 records entered by the date field then select the lowest 10 scores out of those 20.
I am new to more compex SQL Statements any help would be mostly appreciated!
table = HC_ID
date field = date
member_id = member
score = ScoreHC
I have a scenario,
We have equipment table which stores Equipment_ID,Code,Parent_Id etc..for each Equipment_ID there is a Parent_Id. The PK is Equipment_ID Now i want to select the Code for the Parent_Id which also sits in the same table. All the Parent_Id's also are Equipment_ID's.
Equipment table looks like :
Equipment_ID Code DescriptionTreeLevelParent_Id
6132 S2611aaa 4 6130
11165 V2546bbb 3 1022
15211 PF_EUccc 5 15192
39539 VP266ddd 4 35200
5696 KA273eee 3 3215
39307 VM2611fff 4 35163
39398 IK264ggg 4 35177
There is another table for Equipment_Tree which has got Equipment_Tree_ID,Parent_Id and Equipment_ID does not has the Code here.
Select query where i need to select the Code for all Parent_Id's.
My example data as this:
ID code1 code2
1 a m
1 b n
1 c T
2 d m
2 e n
2 f n
3 g m
3 h n
3 i T
I would like to have a select stmt that check for all same ID and code2 does not contain T, then return the records
For example data: the query should return
2 d m
2 e n
2 f n
Is it possible to do this?