SQL Server 2014 :: Bulk Insert Data Into Table
Jul 29, 2014
I need to load the following data into a SQL table. This is how the vendor is able to provide it to us.
CRCorp Daily Report,,,,,,
,,,,,,
Facility,Location,Purchase Order #,Vendor,Inventory #,Date Ordered,Extended Cost
09-Mowtown 495 CRST,09-402A Women's Imaging,327937,"BARD PERIPHERAL VASCULAR, INC.",113989,7/25/2014,650
09-Mowtown 495 CRST,09-402A Women's Imaging,327936,"WB MASON CO., INC.",112664,7/25/2014,8.64
01-Mowtown 499 CRST,01-302B Oncology,327947,McKesson General Medical,n/a,7/25/2014,129.02
[Code] ....
I have attempted to bulk insert it into this table with no luck.
CREATE TABLE POMaster
(Facility VARCHAR(75),
Location VARCHAR(75),
PONum INT,
VendorNm INT,
INVENTORYNUM VARCHAR(25),
orderDte DATE,
ExtendedPrice NUMERIC(10,2)
)
GO
It does not like the double quotes. How to make this format work? Do I need a format file?
View 2 Replies
ADVERTISEMENT
Mar 23, 2015
I want to bulk insert data into a table named scd_event_tab inside a database named rdb.
When I do select * from rdb.dbo.scd_event_tab, i get :
JOB_ID RUN_ONPRIORITYPAYLOADTIMEOUT_INTERVALSTATUSPICKUP_TIMESCD_TYPESCHEDULE_IDDB_ADMIN_LOGIN_REQUIRED_YN
I saved the result into a csv file and then truncated the table. Now, I am trying to bulk insert the data into the table. So I used:
bulk insert
rdb.dbo.scd_event_tab from 'C:userssluintel.ctrdesktopeventtab.csv'
with
(
codepage = 'RAW',
datafiletype = 'native',
fieldterminator = ' ',
keepidentity,
keepnulls
);
go
However, I get this error:
Msg 4867, Level 16, State 1, Line 1
Bulk load data conversion error (overflow) for row 1, column 1 (JOB_ID).
Msg 4866, Level 16, State 5, Line 1
The bulk load failed. The column is too long in the data file for row 1, column 3. Verify that the field terminator and row terminator are specified correctly.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
View 9 Replies
View Related
Jul 22, 2015
I'm testing, with SQL 2014 on the same DB, a procedure that extracts data from a table into a file and Loads data from that file into a different table which has the same columns as the initial table (I use a function to create the create table statement from the source table and change the name of the destination table)
when doing my bcp -c the record with the special character "é" doesn't make it to the file.
when doing a bcp -w the record with the special character makes it to the file but the bulk insert omits the whole record.
The result file in the case that makes it to the file is unicode. I'm not using a format file (don't see the need for it)
The bulk insert into the destination table that contains identical columns as the source (a mixture on int, varchar, char) --> didn't work
I also tried by building the columns of the destination table with nvarchars -- Still doesn't work.
I tried the bulk insert with:
codepage = 'ACP, 'RAW' --> didn't change anything. still didn't work.
It's a complicated process that takes 1 XML record that contains information + the Create Table Statement (to eventually be able to this on a different server/DB) + the title Row for each column + the Data... Each of these are created with a BCP command (all with the same options). they are then appended to each other with a copy /B c:file1.txt + c:File2.txt + c:File3.txt + c:File4.csv c:ResultFile
Once the result file is created I bulk insert the 2 first rows in one table "TableA"
create the tmp table "TABLE B" with the create table statement that is in "TableA"
and do another bulk insert of the remainder of the file into the newly created table.
What else can I try? Should I be creating a format file? what are the benefits of a format file?
It's a very long procedure that does both Extract and Load (with 12 parameters) not sure what I should put here.
View 6 Replies
View Related
Jul 29, 2015
I wasn't sure where to put this topic so I put it here since I figured it is a question that would apply to virtually any version even though I am using SQL Server 2005.
We have a vendor that sends us a fixed width text file every day that needs to be imported to our database in 3 different tables. I am trying to import all of the data to a staging table and then plan on merging/inserting select data from the staging table to the 3 tables. The file has 77 columns of data and 20,000+ records. I created an XML format file which I sampled below:
<?xml version="1.0"?>
<BCPFORMAT xmlns="http://schemas.microsoft.com/sqlserver/2004/bulkload/format" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RECORD>
<FIELD ID="RetNo" xsi:type="CharFixed" LENGTH="6"/>
[Code] ....
The data file is a fixed width file with no column delimiters or row delimiters that I can tell. When I run the following insert statement I get the error below it.
BULK INSERT myStagingTable
FROM '.........myDataSource.txt'
WITH (
FORMATFILE = '.........myFormatFile.xml',
ERRORFILE = '.........errorlog.log'
);
Here is the error:
Msg 4832, Level 16, State 1, Line 1
Bulk load: An unexpected end of file was encountered in the data file.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
View 1 Replies
View Related
Apr 3, 2015
I am unable to load data from flat file to sql table using bulk insert sql statement
My code:-
DECLARE @filePath VARCHAR(200)
DECLARE @sql VARCHAR(8000)
Declare @filename varchar(100)
set @filename='CCNVZ_150401054418'
SET @filePath = 'I:IncomingFiles'+@FileName+'.txt'
[Code] .....
View 1 Replies
View Related
Oct 12, 2007
Hi,
i have a file which consists data as below,
3
123||
456||
789||
Iam reading file using bulk insert and iam inserting these phone numbers into table having one column as below.
BULK INSERT TABLE_NAME FROM 'FILE_PATH'
WITH (KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '||')
but i want to insert the data into table having two columns. if iam trying to insert the data into table having two columns its not inserting.
can anyone help me how to do this?
Thanks,
-Badri
View 5 Replies
View Related
Jun 19, 2014
I found loads of things but nothing seems to work...
I'm trying to get a link with XML data inside the page into a table but I can't find anything
View 9 Replies
View Related
Jun 17, 2007
Hey all
I have a bulk insert situation that would be nice to be able to pull off. I have a flat file with 46 columns that are to go into a table. The table, I want to have a 47th column to be updated later on by means of a stored proc saying if the import into the system was sucessful or not. I have the rowterminator set as '"' thinking that would tell SQL to begin on the next row, leaving the importstatus column null but i still receive an error.
First of all, is this idea possible within this insert statement. Secondly, if so, what would be the syntax to tell the insert statement to skip that particular column. It is the last column listed in the table so it just needs to start on the next row after it inserts the last bit of data in the flatfile.
If this is not possible, is it possible to bulk insert into a temp table?
Thanks
View 1 Replies
View Related
Mar 12, 2015
I am running a set of SQL statements on a SQL server, to insert flat file data into a SQL table. The flat file is already FTP'ed to the SQL server. I seem to be getting an error, which is possibly pointing to a permissions issue
The statements:
BULK INSERT [Jedox_prod].[dbo].[B_BP_Customer]
FROM 'c:jedox_dailyjdcom4401.txt'
WITH
(
FIRSTROW = 2,
MAXERRORS = 0,
FIELDTERMINATOR = '|',
ROWTERMINATOR = '
'
)
GO
The error is :
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "c:jedox_dailyjdcom4401.txt" could not be opened. Operating system error code 3(failed to retrieve text for this error. Reason: 1815)
If it is permissions issue, how do I overcome this?
View 1 Replies
View Related
Oct 10, 2007
Hi,
I have a data file which consists of data as below,
4
PPU_FFA7485E0D||
T_GLR_DET_11||
While iam inserting into table using bulk insert, this pipe(||) is also getting inserted into the table,
here is my query iam using to insert the data using bulk insert.
BULK INSERT TABLE_NAME FROM FILE_PATH
WITH (FIELDTERMINATOR = ''||'''+',KEEPNULLS,FIRSTROW=2,ROWTERMINATOR = '''')
Can any one help on this.
Thanks,
-Badri
View 7 Replies
View Related
Sep 9, 2007
Hey There,
Here, is the example of Bulk Insert into SQL Server Table.
From Application you have to pass a XML string to a Stored Procedure and it will insert all data into table using that XML.
Example SP.
CREATE PROCEDURE StoredProcName
(
@strXML varchar(8000)
)
AS
Declare @intPointer int
exec sp_xml_preparedocument @intPointer output, @strXML
INSERT into tbl_plnd_insertion
SELECT Column1, Column2, Column3, Column4, Column5
FROM OpenXml(@intPointer,'/root/tbl_plnd_insertion',2)
WITH (Column1 varchar(20) '@Column1' , Column2 varchar(20) '@Column2', Column3 varchar(20) '@Column3' , Column4 varchar(50) '@Column4', Column5 varchar(50) '@Column5')
exec sp_xml_removedocument @intPointer
Thanks !!!!!
View 10 Replies
View Related
Jan 17, 2008
Im having some issues with bulk insert.
This is the table:
CREATE TABLE [dbo].[tmp_GA_status](
[GA_recno] [int] NOT NULL,
[GA_desc] [varchar](40) NULL
)
This is the file (unicode):
1|"test1"
2|"test2"
3|"test3"
4|"test4"
5|"test5"
6|"test6"
7|"test7"
8|"test8"
and this is the sql:
bulk insert tmp_GA_status from 'C: empTextDumpGA_status.dta'
with (CODEPAGE='RAW', FIELDTERMINATOR='|', ROWTERMINATOR='
', DATAFILETYPE='widechar')
so yeah, pretty simple. But whatever I do I get this;
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (GA_desc).
So what am I doing wrong ?
View 13 Replies
View Related
Apr 21, 2015
I am currently working with C and SQL Server 2012. My requirement is to Bulk fetch the records and Insert/Update the same in the other table with some business logic? How do i do this?
View 14 Replies
View Related
Dec 27, 2007
Hi!
I'm building a web application. I need to read data from a text or excel file and process the data and then store the result records into database. The record number is big. I can store the data record into database (SQL Server 2005) one at a time. I think it's slow. Is there any way to insert the data in bulk.
Thanks!
ccy
View 4 Replies
View Related
Jun 10, 2015
Here is my table:
My question is: How can I insert a row for each unique TemplateId. So let's say I have templateIds like, 2,5,6,7... For each unique templateId, how can I insert one more row?
View 0 Replies
View Related
Jul 20, 2005
Hi all,We have an application through which we are bulk inserting rows into aview. The definition of the view is such that it selects columns froma table on a remote server. I have added the servers usingsp_addlinkedserver on both database servers.When I call the Commit API of oledb I get the following error:Error state: 1, Severity: 19, Server: TST-PROC22, Line#: 1, msg:SqlDumpExceptionHandler: Process 66 generated fatal exception c0000005EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.I would like to know if we can bulk insert rows into a view thataccesses a table on the remote server using the "bulk insert" or bcpcommand. I tried a small test through SQL Query Analyser to use "bulkinsert" on a such a view.The test that I performed was the following:On database server 1 :create table iqbal (var1 int, var2 int)On database server 2 (remote server):create view iqbal as select var1,var2 from[DBServer1].[SomeDB].[dbo].[iqbal]set xact_abort onbulk insert iqbal from '\MachineIqbaliqbaldata.txt'The bulk insert operation failed with the following error message:[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionCheckForData(CheckforData()).Server: Msg 11, Level 16, State 1, Line 0General network error. Check your network documentation.Connection BrokenThe file iqbaldata.txt contents were :112233If the table that the view references is on the same server then weare able to bulk insert successfully.Is there a way by which I should be able to bulk insert rows into aview that selects from a table on a remote server. If not then couldanyone suggest a workaround. I would actually like to know someworkaround to get the code working using OLEDB. Due to unavoidablereasons I cannot output the records to the file and then use bcp tobulk insert the records in the remote table. I need to have some wayof doing it using OLEDB.Thanks in advanceIqbal
View 7 Replies
View Related
Aug 11, 2015
Example of data in CSV are as follows:
"XXX","0001",-990039739 ,0 ,0 ,0 ,0 ,0 ,0
"ABC"," ",-3422054702 ,0 ,481385 ,0 ,0 ,0 ,0
"JJZ","0001",0 ,0 ,0 ,0 ,0 ,0 ,0Here's my format:
12.0
10
1 SQLCHAR 0 0 """ 0 "" ""
2 SQLCHAR 0 5 "","" 1 OKCCY SQL_Latin1_General_CP1_CI_AS
[Code] ....
View 5 Replies
View Related
Mar 23, 2014
We are facing a problem with loading data from .pdf files from vendor..pdf files have data in tabular format and we would like to insert those fields into a SQL table.We do not want to insert the physical location of the file but, we need to insert the data within the file.How can we read a pdf file?
View 6 Replies
View Related
Jul 22, 2013
Overall goal: Write a Bulk Insert statement using the UNC path of a filetable directory.
Issue: When using the UNC path of the filetable directory in a Bulk Insert Statement, receiving "Operating system error code 50(The request is not supported.)" Looking for confirmation as to whether this is truly not supported.
Environment: SQL Server 2012 Standard. Windows Server 2008 R2 Standard
View 9 Replies
View Related
Sep 18, 2015
I have two tables for insertion in one transaction scope. Table one have 10 rows. After first table insert statement (not yet committed) if I run select on first table from other session, it holds table until my insert is committed or rolled back and from (SSMS), it display 10 rows and then wait for transaction scope till finished. My question is do I need to use no lock hint in this situation. Or there is something wrong with isolation level. One saying that in this situation table should not hols select while insert is in transaction scope.
View 5 Replies
View Related
Mar 18, 2015
Can we bulk insert only the desired column from a flat file to a table?
I am using SSIS to bulk insert from a file with more than 200 columns. I am trying to find a way I can bulk insert them to multiples table through SSIS.
The one way I can think is pre map the columns from the file to the destination tables. Build numerous Bulk Insert tasks to achieve that. But not sure if SSIS will let me do that.
View 4 Replies
View Related
Jul 29, 2014
I am doing a performance testing for In-memory option is sql server 2014. As a part I want to insert 500 million rows of records into a in-memory enabled test table I have created.
I need a sample script to insert 500 million records into a table ....
View 9 Replies
View Related
Jul 31, 2014
I am trying to add multiple records to my table (insert/select).
INSERT INTO Users
( User_id ,
Name
)
SELECT ( SELECT MAX(User_id) + 1
FROM Users
) ,
Name
But I get the error:
Violation of PRIMARY KEY constraint 'PK_Users'. Cannot insert duplicate key in object 'dbo.Users'.
But I am using the max User_id + 1, so it can't be duplicate
This would insert about 20 records.
Why the error?
View 7 Replies
View Related
Feb 4, 2015
I have a master table with after insert trigger on it.. When record is inserted into master table, the trigger fires and is captured in the backoffice table. In case the trigger fails, my record is neither in the master table nor in the back office table..
Is there anyway to capture the record either in the master table or in a separate table.
View 6 Replies
View Related
Jun 22, 2015
I have a need to insert stored procedure output a table and in addition to that add a datetimestamp column.. For example, Below is the process to get sp_who output into Table_Test table. But I want to add one additional column in Table_test table with datetimestamp when the procedure was executed.
insert into Table_Test execute sp_who
View 2 Replies
View Related
Jun 29, 2015
I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?
Msg 4863, Level 16, State 1, Line 1
Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
BULK
INSERTtbl_ASX_Data_temp
FROM
'M:DataASXImportTest.txt'
WITH
(FORMATFILE='M:DataASXSQLFormatImport.Fmt')
[code]...
View 5 Replies
View Related
Apr 21, 2015
I have a situation where I have Table A, Table B.
View C is created by joining table A and table B.
I have written a instead of trigger D on view C.
I do not insert/update/delete on the view directly.
For every insert/update in table A /B the values should get insert/update in the view respectively. This insert/update on view should invoke the trigger.
And I am unable to see this trigger work on the view if any insert/update occurs on base table level.
Trigger is working only if any operation is done directly on the view.
View 2 Replies
View Related
Feb 26, 2015
I am writing a query to return some production data. Basically i need to insert either 1 or 2 rows into a Table variable based on a decision as to does the production part make 1 or 2 items ( The Raw data does not allow for this it comes from a look up in my database)
I can retrieve all the source data i need easily but when i come to insert it into the table variable i need to insert 1 record if its a single part or 2 records if its a twin part. I know could use a cursor but im sure there has to be an easier way !
Below is the code i have at the moment
declare @startdate as datetime
declare @enddate as datetime
declare @Line as Integer
DECLARE @count INT
set @startdate = '2015-01-01'
set @enddate = '2015-01-31'
[Code] .....
View 1 Replies
View Related
Apr 18, 2008
Hello,
I'm just learning SSIS and I've hit my first bump. I am doing a bulk import from a tab delimited text file to an empty sql table that has a Idendity column defined. How do I tell the bulk insert task to skip that column when inserting from the text file. If I remove the identity column it imports the data fine, but I want to create the indentity column in the table too.
Thanks.
View 8 Replies
View Related
Aug 1, 2007
Hi guys,
Consider this Scenario.
I have two Tables.
Table1-Users
Fields are
id, name,joindate,designation, status
Table2-People
Fields are
id, name, status
The table Users have data in it say 100 records
I have to fill it toPeople Table where id=id and name=name and status=status
Any Way?
Regards,
Naveen
View 1 Replies
View Related
Jul 28, 2006
Hi there.
I have a table that contains comma delimited text, and I am trying to convert this into another table
eg my target table looks like
Produce|Price|QuantityPerPrice
and my input table contains strings such as
"apples","7.5","10"
"pears","10","8"
"oranges","8","6"
Does anyone have any ideas on how to do this? I am after a solution that does them all at once: I am currently using charindex() to find each column, one at a time, but given the speed of BULK INSERT I would much rather do it as a table. The one solution that I don't want to resort to is to export the table with delimited strings to a data file, then BULK INSERT it...
Cheers
Neil
View 5 Replies
View Related
Feb 1, 2008
This is in the context of an ETL process - loading large blocks of data.
I bulk insert a bunch of rows (could be millions, more likely 10's of thousands) into a table, perform some queries and then I need to append those rows into a second table and truncate the first table. From an efficiency standpoint, switching the load table into a partitioning scheme would be best, but I can't use partitioned tables for reasons not relevant here.
So, what's going to be the most efficient solution? I can easily do a simple insert into/select from to copy the rows, but that will be fully logged, and I'd really like a minimally logged solution. Looking at the docs for bulk insert/bulk copy, I can't see a solution that will copy data from one table to another, but I'm suspecting that I'm overlooking something. I could re-load the rows from the client using a second bulk copy, but that seems like a terrible waste (although the client is on the same box, and always will be, so it's not as bad as it might be).
View 7 Replies
View Related
Jul 2, 2014
I've been reading about the "table lock on bulk load" option and TABLOCK hint.
So my understanding is by default only row locks are taken out and other queries can read/write data while the bulk load is going on. However if you were doing parallel bulk loads with overlapping keys from a clustered index then they may block each other.
But if the option is enabled, you can do the parallel bulk loads without blocking because a table lock is taken out, however, other processes couldn't read/write the data until they're all done.
Is that the gist of it? I think I got confused by some misinformation. Don't all those row locks eventually likely escalate to a table lock anyway though?
View 1 Replies
View Related
