I have a matrix table. These status can be changed by the user and I want to capture each change in database with out updating the earlier status
Pending
Activated
In PROGRESS
Submitted
Completed
Pending can be changed to submitted or completed. For one form there can be different status at different time. And each status must be saved in the database table. How can I design a table...
I am trying to use change data capture to load the data into the secondtable from table 1 which is coming from UI.
What will be the minimum latency??? Can we use incase of latency less than 5 seconds.
I have a task where I'm dealing with Employee information. I load this data on a daily basis where I capture Name,Is_Active,Address information of the employee and I do truncate and load operation. Now I have a task to have a additional column called 'Statuschanged_dt' and have to capture the date when Is_Active changed from 'Yes' to 'No'. I know this can done in multiple ways like destination lookup, SCD and also CDC.
View 9 Replies View RelatedI have a requirement to implement CDC for 50+ tables to implement incremental data changes warehouse/reporting rather than exporting the whole table data. The largest table is having more than half a billion records.
The warehouse use a daily copy of OLTP db (daily DB refresh). How can I accomplish this. Is there a downside in implementing CDC just for the sake of taking incremental changes on the tables?
Is there any performance impact if we enable CDC on OLTP db?
Can we make use of the CDC tables on the environment we do daily db refresh so that the queries don't hit OLTP database?
What is the best way to implement CDC to take incremental changes for reporting.
Is it possible to capture the contents of THROW within a CATCH into a variable so that it can be written to a logging table?
I can capture ERROR_MESSAGE() to a variable but unfortunately it only writes the last error rather than the previous one that is informational.
I realize that THROW can be multiple lines so it may not be possible to do through TSQL but thought I should ask.
When using Change Data Capture on SQL Server 2012 I have researched that you cannot truncate data in a table. Is this also true if one wanted to delete data from the table? Getting a little confused about what DDL statements can be ran against a table with CDC enabled. Does CDC have to be disabled before performing certain DDL statements against a table?
I would like to safeguard the truncation and dropping of certain tables within the dbo schema. Wondering if I could do this with one fail swoop with CDC enabled on those tables. The other option would be to use a DDL trigger to prevent certain DDL statements to be performed.
I restored a sql server database today. There is a problem though. In SQL server, right next to the name of the database are the words "Restricted User". Their seem to be some limitations on my access to this database now as I am not able to run some of my C# code against the database. How can I fix this in SQL server so that I am not a Restriced user.
Example of what I am talking about. In SQL server my database is named Gorlaz. Just to the left of this is a yellow Icon that represents the database "Gorlaz". For illustration purposes I will use the character "$" to substitute for the yellow database icon. So this is how it reads in SQL server management studio.
$Gorlaz(Restricted User)
Hi All,
I am now working on the design phase of my project, we are looking to implement Change Data Capture (CDC) but i need some help if you guys has implemented before using the SSIS 2005 componets. I am trying to use the Following:
Source---------Derived Column---------Lookup---------------Conditional Split (to split New records and Updated Records)-----------Destination. Respectively.
Lets make it clear, my source holds (Old records and newly added or Updated records), the Derived Column is to Derive new columns called Insert_Date and Update_Date. The Lookup i am Using is to look the Fact_Table(the Old Records) as Reference, and then based on this lookup i will split the records on timely based using the Conditional Split. My question is
1. Am i using the right components?
2. what consideration should i have to see to make it true (some Logics on the conditional split)?
3. Any script which helps in this strategy?
4. If you have a better idea please try to help me, i need you help badly.
Thank you,
SamiDC
In my SSIS program I have a main package that calls bunch of packages step by step. I would like to find out how can I capture the status of each task once its done and insert the value whether its "success" or "failure" into a sql server table.
any ideas how should I go about doing this?
Or can it record before and after column changes based on the LSN only?
An extract from a file based legacy accounting system is performed every night. The system does not have a primary key because transactions are managed through program code. (the more things change...). The extract is copied to text in Unix and FTP'd to Windows, where the file is loaded into SQL Server by kill & fill. Because of the expense of modifying the source system, there is enormous inertia/resistance to injecting a primary key at the source, so kill & fill it stays.
In reading about Change Data Capture, it seemed to me that column level insert update and delete are stored in tables that remember the before and after content of each column tracked. In my reading I have seen many references to the LSN to decide when and what to record as changed, but I have not seen any refereference to the necessity of a primary key for Change Data Capture to work. This is in contrast to replication, where the requirement for the existence of a primary key is made plain.
Is it possible to use Change Data Capture against a table without a primary key? How to use it to change the extract from kill and fill to incremental.
Hi,
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported.
Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
Thanks in advance for any help.
Aya.
We have oracle linked server created on one of the sql server 2008 standard , we are fetching data from oracle and updating some records in sql server . Previously its working fine but we are suddenly facing below issue.
Below error occurred during process .
OLE DB provider "OraOLEDB.Oracle" for linked server "<linkedservername>" returned message "".
Msg 7346, Level 16, State 2, Line 1
Cannot get the data of the row from the OLE DB provider "OraOLEDB.Oracle" for linked server "<linked server name>".
Hi,
Is there any way to update the status bar in Query Analyzer.
Suppose I am running a script which updates data to a file. I want to know the status showing the percentage it completed.
Thanks
:confused:
Again, looking for the best way to do this with SSIS.
I have a source table and I'd like to load it to a database daily, capturing what changed.
This is not a dimentional table but a fact table.
So, what I;d need to do for each record is to see if the record already exists (using business key) and if it does - compare some of the data fields and of there are changes - register it somehow and if not changes ignore.
Right now, the only two ways I see to do it with SSIS:
- Use Slowly Chaging Dimentions transformation
- Use Lookup and customize SQL, adding something like: WHERE key = ? and (field1 <> ? or field2 <> ?...)
I was wondering of there an easy way.
Dima.
I'm looking for a quick script that someone has already written to update statistics (not to rebuild or re-organise) on specific indices in specific databases - I guess loop though a table comprising of a list of databases and the indices.
I know Ola has one but I'm not look for something that is that complicated. If I cannot find one I'm going to have to write one myself - I want to try and avoid re-inventing the wheel as tomorrow I have to do this work and it's about 7K plus indices in about 10+ databases.
Is there a built in functionality to do the CDS in SSIS 2005? if not, what is the best way to do this in ssis 2005?
View 2 Replies View RelatedSID statusid listindex listsize sent
1 12 25 25 1
2 12 25 50 0
3 12 75 150 1
4 14 25 25 1
I have a table like above where cid is unique but status is not for all the status id i need put 1 as they sent out .but till now i used max listindex because they used to send files sequentially but now list index is random so how to update sent to 1 for all the status ids.
We have enabled Change Data Capture for auditing our table changes in SQL Server 2008. There is a request to NULL out a few columns (for all rows) in a couple CDC tables, due to compliance with a certification. Is there a compelling reason not to modify these tables and to leave the audit trail as-is?
View 1 Replies View RelatedSQL Server 2008R2: Enabling Change Data Capture on a replicated database or its tables will have any performance impact on existing transactional replication.Is it possible to use both of them con temporarily.
View 5 Replies View RelatedI am asking about a virtual IP for SQL Server, is there a way we can assign a different IP to SQL Server other than the server's(host) IP address? like the same what we do in a clustered env.
View 3 Replies View RelatedI'd like to capture the change event when it happens and have both a record posted to a table and an email notification to the DBA.
View 7 Replies View RelatedIs there any data type in SQL Server 2005 which captures only the TIME in default DATETIME type?
For example, if the datatime field has a value 2007-12-11 12:31:00.000, i need a datatype which can capture 12:31:00.000 alone. The data type should be in a fashion so that i can find differences in time also...
Any ideas??
I have 5 tables that are joined respectively,
Each one of the tables listed below has a “CreateDateTime” and “UpdateDateTime” fields, I need to get yesterday changes, I can get any record where either CreateDateTime or UpdateDateTime is greater than midnight yesterday butI need to watch dates on all of the tables so I need to do atleast 10 date checks.
If any table shows an updated or created record, I need to gather ALL of the information for that customer. So, if my name didn’t change (SCUS table), but my email does (SEML table), I have to pull out both the SCUS and SEML tables (and the others, of course). So It may not be simple WHERE clause, How can I achieve this:
SELECT
SCUS.CUSFULLNAME
,
SCUS.CUSMIDDLENM
,
SCUS.CUSLASTNM ,
[Code] ....
I have a Table "Customer" which contain a Field "CreditLimit",
Now I want a Mail alert on change of this filed with both value old credit limit value and New credit limit value.
Is its possible without trigger??
I have located a bug in the functions cdc.fn_cdc_get_net_changes_<capture_instance> generated when you enable cdc on a table. This bug can be triggered if 2 rows are created in the _CT table having the same values for the __$start_lsn, __$seqval and the table's key column(s). From research on the internet I have found such rows can be created by a "deferred update": a single update statement in which a column that is part of a unique constraint is updated.
In order to report the bug with Microsoft I need to create a complete series of steps-to-reproduce. But even though the situation happens several times a day in our production environment, I have not yet been able to reproduce it in my test environment.I need a single update statement (plus maybe some steps in advance) that make that the log reader inserts 2 rows into the _CT table, one with __$operation = 1 (delete) and another with __$operation = 2 (insert) as opposed to the single row with __$operation = 4 that it inserts for a normal update. Below is the script I have so far to create a fresh database, enable cdc, create a test table, insert some data and update this data.
I would have liked the last update statement to be handled as a "deferred update". However in all of my tests the log reader just simply inserts a single row into the cdc.dbo_NETTEST_CT table.how to reproduce the situation where I get the 2 rows with __$operation 1 and 2 from a single update statement instead of the single row with __$operation = 4.
CREATE DATABASE [cdcnet]
CONTAINMENT = NONE
ON PRIMARY
( NAME = N'cdcnet', FILENAME = N'S:SQLDATAcdcnet.mdf' , SIZE = 4096KB , FILEGROWTH = 1024KB )
LOG ON
( NAME = N'cdcnet_log', FILENAME = N'T:SQLLOGcdcnet_log.ldf' , SIZE = 1024KB , FILEGROWTH = 10%)
[code]....
I have two records...is having pid=10
idpid
10110
10210
1035
1046
1065
then i executed the below query..
update Child set pid=10 where id in (101,102)
the sql server showing message like
(2 row(s) affected) but as per data no records updated so i need to change this message type
if i ran the above update query the the result should be like
(0 row(s) affected)
is there any way to change this...
How can I easily identify who dropped a table?
View 8 Replies View RelatedI create a report base on categories and sales of goods. Now I have Daily Info about all Products.
But I Need to present this report base on weekly periods. in pivotal format.
I family with pivotal format but change between daily report and weekly report is ambiguous for me.
I am task with identifying the source database name, id, and server name for each staging table that I create. I need to add this to a derived column on all staging tables created from merging same tables on different servers together.
When doing a Merge Join, there is no way to identify the source of data so I would like to see if data came from one database more than the other servers or if their are duplicates across servers.
The thing that bugs me about SSIS Data Flow task is there is no way to do an easy Execute SQL Task after I select my ADO.NET Source to get this information because my connection string is dynamic and there is no way of know which data source is being picked up at runtime.
For Example I have Products table on Server 1 and 2:
Server 2 has more Products and would like to join the two together to create a staging table.
I want see the following:
Product ID, Product Name, Qty, Src_DB_ID, Src_DB_Name, Src_Server_Name
1 IPAD 1000 2, MyDB1, Server1
100 ASUS Pad 40 1, YourDB, Server2
get database name and server name in DATA FLOW only (without using a for each in Control Flow)
I get the following error message when a job calls a Stored Procedure that TRUNCATES a Table:
Cannot truncate table 'CombinedSurveyData' because it is published for replication or enabled for Change Data Capture
Is my only option to change the TRUNCATE to DELETE?
[URL]
Hi friends,
please help me with my urgent needs.
I have created a job. This job contains 6 steps.
All steps are sql querries.
In step no:3 i have an if condition in the script.
When the condition becomes true i have to run the script.
That is ok.
But the problem is when the condition becomes falls i have
to go to the step no 6 and at the same time the status
of step no:3 should be like "failed".
can you help me please
Please this is an urgent reqirement.
Thank you.
when i click on the modify option on a stored procedure it is not opening for editing as earlier. it opens as if for scripting.for example i clicked modify procedure on stored proc. "text" and the result is as follows.
/****** Object: StoredProcedure [dbo].[test] Script Date: 05/01/2015 7:50:08 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[test]') AND type in (N'P', N'PC'))
[code]....
We have two tables with names X and Y.
X has a,b columns. And Y has c,d columns.
I want to update b column in X table with the values from d column in Y table on condition X.a=Y.c.