I have created a SharePoint external list using SQL Server, the data source is SQL Server. Is there way that I could get the logged-in SharePoint user and stored in SQL Seever?
View 2 RepliesWe are just looking to move to SSIS 2014 from 2008R2 however we have a number of packages which write to Sharepoint lists. The SHarepointDestination doesn't seem to work in VS 2013, any solution other than buying a third party connector.
View 1 Replies View Relatedis bulk logged recovery model support point in time recovery
View 9 Replies View RelatedDear GroupI wondered whether there's a function or script that will show mewhether a user is currently logged-on to a MSSQL 2000 database? I'musing SQL Authentication.Thanks very much for your help & efforts!Have a nice day!Martin
View 2 Replies View RelatedHi,
I wanted to know How can i find out that with which user i am logged in. Is there any command to find out the same.
( like in oracle, we have command -- showuser, which will return the logged in user of your session).
Thanks in advance.
-- Chetan
Hi There
I am in the process of cosolidating sql servers.
One of them literally has hundreds of sql logins, obviously i need to clean these up, however i a not sure how to determine when a user last logged in ?
How can i find out the last login date of a user ?
Thanx
Hi!
I would like to select the 10 latest logged in users and then display them in a gridview-control....
But Iam not good at SQL, so I would really appreciate if someone could help me to write the select-part for this!!
(I use the database 'ASPNETDB.mdf', which is automatically created by VVD 2005 Express Edition)
NOTE: I am talking about roles in my sql server - NOT in asp.net. I need to create a stored procedure that retrieves the roles that the currently logged in sql user has for a different database. I have the code that gets the roles for the user, but it only works if the user is in the database. I want to be in one database, and get the roles for a different database. I have tried using USE DATABASE, but this is not allowed in a store procedure.
View 10 Replies View RelatedI can get a list of all databases in SQL Server using
sqlText = "select name from sysdatabases order by name".
How can I get such a list for the currently logged in user only?
Thanks in advance
Harold Hoffman
How do I refer to the user logged on to the database?
I can refer to a table as dbo.tblApptDaily,
but how do I refer to
[current user].tblApptDaily?
Create Procedure "prcCreateApptDaily"
as
Create dbo.tblApptDaily
(ID int primary key, ApptTime datetime,
book1 numeric, book_Status1numeric default (0), PN1 varchar (50), ApptID1
int,...LastID int)
Hi all
I've been having a really difficult time finding out how to run a query which selects records from an SQL database for the current logged on user. I've tried a whole manner of different approaches but here is where I am at now:
<script runat="server">
Protected Sub Page_Load(ByVal sender As Object, ByVal e As EventArgs)
If Not Page.IsPostBack Then
ds_meobservingcolleagues.SelectParameters(0).DefaultValue = User.Identity.Name
End If
End Sub
</script>
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataSourceID="ds_meobservingcolleagues">
</asp:GridView>
<asp:SqlDataSource ID="ds_meobservingcolleagues" runat="server" ConnectionString="<%$ ConnectionStrings:StPaulsDatabase %>"
SelectCommand="SELECT [observeTeacher], [observeBy], [observeReason] FROM [Observations] WHERE ([observeBy] = @observeBy)">
<SelectParameters>
<asp:Parameter Name="observeBy" Type="String" />
</SelectParameters>
</asp:SqlDataSource>
This is not resulting in any error. But it is not returning the records that it should be either.
Please can anyone help? I'm sure it shouldn't be this difficult to do
Hello.I realize that this question has been asked before, but I still can't get it to work. Below are some links that might be of help:http://forums.asp.net/p/1159666/1913519.aspx#1913519http://forums.asp.net/p/1161930/1924264.aspxhttp://forums.asp.net/p/1116601/1732359.aspx#1732359http://forums.asp.net/t/1104718.aspxhttp://forums.asp.net/p/1096290/1655706.aspx#1655706http://forums.asp.net/p/1110162/1707952.aspx#1707952 Basically, I need a DropDownList to display only projects for which the logged in user is assigned as leader. The [Projects] table contains an integer ProjectId, a string ProjectName, a uniqueidentifier ProjectLeader, and other fields. Can someone help me with the SQL query and code? * Here is the definition of the SqlDataSource: <asp:SqlDataSource ID="SqlDataSource5" runat="server" ConnectionString="<%$ ConnectionStrings:ASPNETDB.MDFConnectionString %>" SelectCommand="SELECT [ProjectId], [ProjectName] FROM [Projects] WHERE ([ProjectLeader] = @Leader)" OnSelecting="SqlDataSource5_Selecting"> <SelectParameters> <asp:Parameter Name="Leader" Type="Object" /> </SelectParameters> </asp:SqlDataSource> * Here is the definition of the SqlDataSource5_Selecting method: protected void SqlDataSource5_Selecting(object sender, SqlDataSourceSelectingEventArgs e) { e.Command.Parameters("@Leader").Value = loggedInUserId; } where loggedInUserId is a global variable of type System.Guid. It has been evaluated in the Page_Load event to as: loggedInUserId = (System.Guid)Membership.GetUser().ProviderUserKey; Now the first problem I encounter is that when I run the page, the compiler complains and says, "error CS0118: 'System.Data.Common.DbCommand.Parameters' is a 'property' but is used like a 'method'." The second problem is when I insert the line: SqlDataSource5.SelectParameters("Leader").DefaultValue = loggedInUserId; in page_Load. The compiler again says, "error CS0118: 'System.Data.Common.DbCommand.Parameters' is a 'property' but is used like a 'method'." I've spent a long time trying to figure it out, but could not solve it. I would appreciate it if someone can help me out. Thank you very much.
View 11 Replies View RelatedI need to get the computer details of the person that logged in. I have a client that needs me to write a computer asset logging system for them. This is a one table database that will keep all the computers in the company's details like serial number, bios serial number, ram size disk size, mother board info etc. This is a vast number of details and what they want to do is when for instance the ram changes e.g. taken out or added they need the program to update the table with the new information once the computer starts again.
View 4 Replies View RelatedI have created table called Login in sql server where i have column usercode, email and login_date (login_date is datetime type)So, i created web application using .net. whenever user logged in, i am allowing based userLoged table and i am inserting into login table.
login table usercode email login_date
001 a@gmail.com 2015-11-18 22:02:41.153
001 a@gmail.com xxx
.
.
.
I have another table called userLoged where i have column usercode,email and web_access
UserLoged table usercode email web_access
001 a@gmail.com Y
Now, if a@gmail.com (001) is not logged in for 45 days, i need to update web_access to be 'N' how to know if he /she not logged for 45 days.
Assume I have a heirarchy like the following:
- John Smith
- James Jones
- Robert Allen
- Lisa Andrews
- Bob Thompson
Now, I have a report where whoever is logged in will only see data for themselves and those below them, so John Smith would see everyone including himself, but Lisa Andres would only see herself and Bob Thompson. James Jones would be able to see everyone except John Smith.
How do I go about implementing this code, for example in an asp.net page where one of the user's logs on to view the report. Currently, there is a T-SQL function that creates a user heirarchy table, but it is very slow and I am curious if SSRS 2005 has any new capabilities in handling this.
Thanks,
Saied
Is this level of security possible in RS 2005? if so how?
Any guidance would be appreciated.
Thanks.
Hello
how can i get current logged windows user name in tsql. I know with windows aut it is possible how can i get this when sql auth.
Is there any system function or any special codeing required ?
regards
Chikuu
We have reports in SharePoint integrated mode which are really slow when compared to native mode. I have been asked to research and give info on what exactly causes the delays.
Any articles which give me information as to what happens when a report is run from SharePoint server and where does it log.
How do I insert the UserName of the Logged in user into the DB field UserID. I created a web form page, and added a form view control set the page default to Insert Mode. The Page is used to insert data. I have a hidden field called UserID that I would like to capture the Logged in user. I have logged in to the default page with userID and password, added a new record, and the db table field UserID is empty. I have been trying to figure out what I am doing worng, but no luck, Please suggest the best way to do this. I have listed what I have done thus far?
I have added the login Control from Login and added it to the page as a hidden field thinking that I needed to have this field on the page to get this to work where you copy the value in the Loginname field to the useridTextbox on the formview1 insert template. I read on line where the method below is better. Please tell me what I am doint wrong.
System.aspx---------------------------------------------------------------------------------------------------------------1) <asp:FormView ID="FormView1" runat="server" AllowPaging="True" DataKeyNames="SystemID" DataSourceID="SystemSqlDataSource1" DefaultMode="Insert" Width="583px">2) <asp:TextBox ID="UserIDTextBox" runat="server" Text='<%# Bind("UserID") %>' Visible="False"></asp:TextBox><br />3) <asp:SqlDataSource ID="SystemSqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:RCMISConnectionString %>" DeleteCommand="DELETE FROM [tblSystem] WHERE [SystemID] = @SystemID" InsertCommand="INSERT INTO [tblSystem] ([SystemID], [SystemDesc], [Inactive], [TimeStampEntry], [TimeStampUpdate], [UserID]) VALUES (@SystemID, @SystemDesc, @Inactive, GETDATE(), @TimeStampUpdate, @UserID)"4) <InsertParameters> <asp:Parameter Name="SystemID" Type="String" /> <asp:Parameter Name="SystemDesc" Type="String" /> <asp:Parameter Name="Inactive" Type="Boolean" /> <asp:Parameter Name="TimeStampEntry" Type="DateTime" /> <asp:Parameter Name="TimeStampUpdate" Type="DateTime" /> <asp:Parameter Name="UserID" Type="String" /> </InsertParameters> </asp:SqlDataSource>System.aspx.vb---------------------------------------------------------------------------------------------------------5) Partial Class MemberPages_RCM_frmSystem Inherits System.Web.UI.Page Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load 'UserIDTextBox.Text = Membership.GetUser().ProviderUserKey.ToString() End Sub Protected Sub FormView1_ItemInserted(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.FormViewInsertedEventArgs) Handles FormView1.ItemInserted 'Set the UserID Value to the currently logged on user's ID e.Values("UserID") = Membership.GetUser().ProviderUserKey End SubEnd ClassThank you in advance,
Hi,
I have some sensitive and non-sensitive info/fields in one of my reports. Is there a way to hide/show the info based on the logged in user? or do I have to create separte reports for each type of info like one for sensitive and another one for non-sensitive info.
Thanks inadvace for your help!
We are using Windows authenication within our system, and I was wondering how it would be possible to determine if the user conected to the SQL SERVER instance was a member of a particular active directory security group?
Thanks.
I am using SSIS 2014 and installed adapter for sharepoint list source and destination and when I refresh the toolbox I don't see them. Is there a way to manually add them?
View 4 Replies View RelatedI'm trying to create a simple function that will do a count on a table. I want to pass the table name in form of a parameter to the variable and this function will return the count as an int. See my function below...
CREATE FUNCTION count_rows (@tablename varchar(100)
RETURNS int AS
BEGIN
DECLARE @emp_count AS int
declare @declaration varchar(100)
[Code] ....
The errors I am getting are as follows:
Msg 102, Level 15, State 1, Procedure count_rows, Line 3
Incorrect syntax near 'RETURNS'.
Msg 102, Level 15, State 1, Procedure count_rows, Line 10
Incorrect syntax near '@declaration'.
Msg 178, Level 15, State 1, Procedure count_rows, Line 14
A RETURN statement with a return value cannot be used in this context.
I need to do some operations on a table when any user dont work with it.How do i do it?
Do i lock the table? and is it possible?(I dont want to deny permission from a user because cause error)
Can i do it with a open transaction ?
I created a new login and then created a new user [COM] in DB with default schema pointing to [COM]
I created then schema [COM] WITH AUTHORIZATION [COM]
I want this [COM] user to have all permissions it needs on [COM] schema only. How do I do that? When I try to create table [Com].Table it gives me permission denied.
What am I missing?
I have a user, who is trying log into the server, but everytime he gets this error saying something about the Group policy denies him access.
This user needs access and i'm trying to understand how to grant it to him.
I have been looking into how i can access the group policy editor, but the farthest i can get is the Local group policy editor. How do i make sure this specific user has access?
My sa account can not see the tables in the db. but can connect to the server
View 2 Replies View RelatedI've been running the Ola Hallengren maintenance script for the last five months without missing a beat. Today I find an error stating the UserDatabase Integrity check job failed last night. This is running on SQL Server 2014 BI edition w/64 Gigs.
I ran a DBCC CHECKDB on each database manually and all worked until I tried it on the biggest one that is about 18 gbs. It just keeps running and I eventually stopped it so I'm guessing it is memory, but doesn't make sense considering it has 64 gbs. I have it set to 64/4 max / min. Again, this was never an issue until last night.I've been looking up all morning, but not seeing much on this error "The operating system returned error 1453"?
I need to do some operations on a table when any user dont work with it.How do i do it?Do i lock the table? and is it possible?
View 8 Replies View RelatedI would like to find Query to retrieve User DataBase Startup Time from SQL server that we see in the Sql Server Log.
I was able to find the Server Startup Time but not the individual Databases .
I have a user who needs access to views like(dbo.viewnameabc1,dbo.viewnameabc2 and so on...) dbo.viewnameabc* and anytime the user creates the view he already have the permission to view those views....
View 3 Replies View RelatedThere are 3 columns in the result set - part num, Qty and MO num. Each MO num has part numbers.So there might be same part numbers in MO's. Each part num has qty. So, if I group by part num, I get Qty.
1.There are duplicates of part.num and I want to remove duplicates and add quantities of those duplicates into one single quantity. For example, xxxx is a part num, then xxxx=1,xxxx=3,xxxx=5. I want xxxx=9. I want to sum those. Another question is, each MO has a user. I want to join user and MO num in MO.
Heres the code,
part.num , (woitem.qtytarget/wo.qtytarget) AS woitemqty,
(SELECT LIST(wo.num, ',') FROM wo INNER JOIN moitem ON wo.moitemid = moitem.id WHERE moitem.moid = mo.id) AS wonums FROM mo INNER JOIN moitem ON mo.id = moitem.moid
LEFT JOIN wo ON moitem.id = wo.moitemid
LEFT JOIN woitem ON wo.id = woitem.woid AND woitem.typeid = 10 LEFT JOIN (Select sum(woitem.qtytarget) as labor, woitem.woid, uom.code as uom from woitem JOIN part on woitem.partid = part.id and part.typeid = 21 JOIN uom on woitem.uomid = uom.id group by 2,3) as labor on wo.id = labor.woid LEFT JOIN part ON woitem.partid = part.id
I have 3 servers taking part in an AlwaysOn AG.
I want to grant a user READ access to only one replica, and certainly not to the principle.
How do I go about doing this?