This is a piece of my code:
SELECT TOP 1000 *...
case when Rownum<= datediff(day, salesdate, baseenddate)
then DATEADD(mm, RowNum, salesdate) /*error at this point*/
else 0 end as subscriptionrowdate
FROM Subsrow
Rownum is an integer type. DATEADD is the part when the error is but i dont know how to convert this to int
I'm getting this error when trying to insert data into a table.
"Operand type clash: int is incompatible with date"
This is the SQL I used to create the table:
Code:
CREATE TABLE customers(
customer_id int IDENTITY(1,1) NOT NULL,
member_yn char(1) NOT NULL,
membership_number int NOT NULL,
date_became_member date NOT NULL,
[Code]....
This is the SQL I am using to add data: (Note that there are two dates in each line, scroll to the side.)
Code:
INSERT INTO customers VALUES ('y', 156, 2010-08-29, 'John', 'Smith', '1235 Main Street, Dunmore, PA 18512', 6963287654, 'jsmith@hotmail.com', 1986-06-23);
INSERT INTO customers VALUES ('y', 159, 04/15/2011, 'Mary', 'Jones', '235 Ardmore Blvd, Pittsburgh, PA 15221', 3429831594, 'jones_mary@gmail.com', 01/12/1992);
Each of the lines above to add data uses a different data format because I tried both, while commenting out the other, hoping for the problem to go away with the change in format.
Here is the SQL code to create a primary key for this table:
Code:
ALTER TABLE customers ADD CONSTRAINT pk_customers PRIMARY KEY (customer_id);
I am trying to combine columns and add it to an existing table
insert into Future_Link.dbo.tbFLink (Fastighet, Anlaggning)
values (
(select strFastbeteckningTrakt + ' ' + strFastbeteckningBlock + strFastbeteckningTecken + intFastbeteckningEnhet
from EDPFutureGagnef.dbo.tbFuAnlaggning),
(select strAnlnr
from EDPFutureGagnef.dbo.tbFuAnlaggning)
)
Generate error:
Msg 206, Level 16, State 2, Line 1
Operand type clash: int is incompatible with text
I uploading an image from a web page into Sql Server 2000 database. I call a stored procedure with the parameter @Flag of type Image. When I tried to pass a null value to this parameter I got the error:"Operand type clash: nvarchar is incompatible with image".I was adding the parameter like this:sqlCmd.Parameters.AddWithValue("@Flag", DBNull.Value);After trying few different things I found a workaround using the following:sqlCmd.Parameters.Add("@Flag", SqlDbType.Image);sqlCmd.Parameters["@Flag"].Value = DBNull.Value;Possibly a bug in the SqlCommand.Parameters.AddWithValue method ?
View 1 Replies View RelatedI have a stored procedure that works fine on SQL Server 2000 or 2005,but when run on an machine running MSDE, I get the Operand type clash,int is incompatible with text data type error. The data type isactually text and text is the type of data being passed. Anyparameters not being used are defaulted to null. Any ideas why thiswould happen on MSDE and work fine anywhere else?Thanks so much.
View 2 Replies View RelatedHello!I am trying to update a DetailsView but I keep getting the error of Operand type clash: int is incompatible with text. I have double checked the stored procedure but I don't see any obvious offending parameters. ID is the only parameter that is an interger. I am not trying to update the ID at all, just for the filter purposes to update the records. ALTER PROCEDURE [dbo].[proc_update] /* ( @parameter1 int = 5, @parameter2 datatype OUTPUT ) */ @BUILDING_SV float, @BUILDING_ADDS float, @BUILDING_DEL float, @BUILDING_TOTAL float, @ME_SV float, @ME_ADDS float, @ME_DEL float, @ME_TOTAL float, @PATTERNS_SV float, @PATTERNS_ADDS float, @PATTERNS_DEL float, @PATTERNS_TOTAL float, @SS_VALUE float, @SS_TOT float, @COMMENTS text, @OCCUPANCY_TYPE varchar(255), @REVISED_BY varchar(255), @DRAWINGS float, @INVENTORY float, @TOTAL float, @DIVISION varchar(255), @LOCATION varchar(255), @LOCATIONCODE varchar(255), @ADDRESS1 varchar(255), @ADDRESS2 varchar(255), @ADDRESS3 varchar(255), @ADDRESS4 varchar(255), @PROP_ID float, @POST_DATE smalldatetime, @ID intAS /* SET NOCOUNT ON */ UPDATE dbo.PROPERTY_VALUES SET BUILDING_SV = @BUILDING_SV, BUILDING_ADDS = @BUILDING_ADDS, BUILDING_DEL = @BUILDING_DEL, BUILDING_TOTAL = @BUILDING_TOTAL, ME_SV = @ME_SV, ME_ADDS = @ME_ADDS, ME_DEL = @ME_DEL, ME_TOTAL = @ME_TOTAL, PATTERNS_SV = @PATTERNS_SV, PATTERNS_ADDS = @PATTERNS_ADDS, PATTERNS_DEL = @PATTERNS_DEL, PATTERNS_TOTAL = @PATTERNS_TOTAL, SS_VALUE = @SS_VALUE, SS_TOT = @SS_TOT, COMMENTS = @COMMENTS,OCCUPANCY_TYPE = @OCCUPANCY_TYPE, REVISED_BY = @REVISED_BY, DRAWINGS = @DRAWINGS, INVENTORY = @INVENTORY, TOTAL = @TOTAL, DIVISION = @DIVISION, LOCATION = @LOCATION, LOCATIONCODE = @LOCATIONCODE, ADDRESS1 = @ADDRESS1, ADDRESS2 = @ADDRESS2, ADDRESS3 = @ADDRESS3, ADDRESS4 = @ADDRESS4, PROP_ID = @PROP_ID, POST_DATE = @POST_DATE WHERE [ID] = @ID RETURN Help! Thanks.
View 13 Replies View RelatedIm trying to insert a new record into tblMessages...the unique ID generated for MessageID is the value I want to use as a value for the MessageID field when inserting a new record in tblUsersAndMessagesI have the following sp:
-- ================================================
-- Template generated from Template Explorer using:
-- Create Procedure (New Menu).SQL
--
-- Use the Specify Values for Template Parameters
-- command (Ctrl-Shift-M) to fill in the parameter
-- values below.
--
-- This block of comments will not be included in
-- the definition of the procedure.
-- ================================================
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
-- =============================================
-- Author: <Author,,Name>
-- Create date: <Create Date,,>
-- Description: <Description,,>
-- =============================================
CREATE PROCEDURE spNewMessage
@UserIDSender nvarchar(256),
@MessageTitle nvarchar(50),
@MessageContent text,
@MessageType int,
@MessageID uniqueidentifier,
@UserID uniqueidentifier
AS
Begin
Set NoCount on
DECLARE @WhateverID uniqueidentifier
INSERT INTO tblMessages(UserIDSender,MessageTitle,MessageContent,MessageType)
VALUES (@UserIDSender,@MessageTitle,@MessageContent,@MessageType)
Select @WhateverID=@@Identity
INSERT INTO tblUsersAndMessages(MessageID,UserID)
VALUES (@WhateverID,@UserID)
End
GO
And here are my tables:tblUsersAndMessages allow nullsMessageID uniqueidentifier falseUserID uniqueidentifier falseNew bit false *default set to ((1))
tblMessages allow nullsMessageID uniqueidentifier false *PK default set to (newid())UserIDSender uniqueidentifier falseMessageTitle nvarchar(50) trueMessageContent text trueSentDateTime datetime false * default set to (getdate())MessageType int false
Now when I try to add my SP I get this error:Msg 206, Level 16, State 2, Procedure spNewMessage, Line 22Operand type clash: numeric is incompatible with uniqueidentifierWhat can this be?!?
I am using the below query for calculation and I get this error.
Operand data type nvarchar is invalid for sum operator.
'$ '+ REVERSE(SUBSTRING(REVERSE(CONVERT(varchar,(CAST(round(isnull(sum(t7.[Pre Override Cost]),0),0) as money) + 1 -
cast(round(isnull(sum(t8.[Shared Dollars]),0),0)as money)),1)),4,255)) as [PreOverride L2],
'$ '+ REVERSE(SUBSTRING(REVERSE(CONVERT(varchar,(CAST(round(isnull(sum(t7.[Post Override Cost]),0),0) as money) -
cast(round(isnull(sum(t8.[Shared Dollars]),0),0)as money)),1)),4,255)) as [PostOverride L2]
I get this error "Operand data type varchar is invalid for divide operator".
select V.[Parent Name],
[ID],
round((V.SoftValue/VTMValue)*100,0) 'SPercentage',
round((V.HMUValue/VTMValue)*100,0) 'HPercentage2',
round((V.PrimaryValue/VTMValue)*100,0) 'PPercentage2'
[code]...
I have even converted the values to float.
I tried a simple declaration
declare @fromdate date
declare @todate date
set @fromdate='2011-12-01'
set @todate='2012-11-31'
print @fromdate
print @todate
Got the error as "Conversion failed when converting date and/or time from character string." then i tried as below
declare @fromdate date
declare @todate date
set @fromdate=12-01-2011
set @todate=11-31-2012
print @fromdate
print @todate
this time got the error as ''
Msg 206, Level 16, State 2, Line 3
Operand type clash: int is incompatible with date
Msg 206, Level 16, State 2, Line 4
Operand type clash: int is incompatible with date".
I would like to 'drop' some trailing zeros from a decimal value, e.g.: 50.000000, and I am wondering how to go about this?
The value is definitely of decimal type, and in this instance I know that I want to eliminate exactly six (6) zeros.
I am trying to convert a column (nvarchar) to date time.
Here is an example of some values:
20110905
20110901
20111003
As expected, I received the following error: 'Conversion failed when converting date and/or time from character string.'
However, I am unsure how I should approach updating the whole column. I would like the format to be '103'.
I have a SSAS stored procedure with a signature:
public Set DoSomthing(Set toBeProcessed, Set measuresToWorkWith)The set measurseToWorkWith is passed as {[Measures].[Measure1], [Measures].[Measure2] ...}
with the measures being real or query-scoped calculated members.
To get the value of the measure for each tuple in the set toBeProcessed, I create an Expression for each tuple (measure) in the set measuresToWorkWith then for each tuple in toBeProcessed call expression.Calculate(tuple) which returns a MDXValue.
My problem is that in order to make the code generic I need to get the real (.NET) data type of the MDXValue. The class only has explicit conversion methods ToInt16() etc which implies that the data type is known at design time.
However, if one of the measures is a query-scoped calculation then it could return a .NET double, int, bool or string.
If the measure is real then I can look up its metadata. However, it appears that if it is a formula (scoped member) then are all bets are off?
I have to write a where condition where i need to compare string with date
I have 2 columns FROMDATE and TODATE with datatype varchar(9)
The strings in the columns looks like YYYYMMDD+'1' or YYYYMMDD+'2' here 1 is Am and 2 is PM
i.e., 201401011 or 201401012
So I need to chop off last character before using them in WHERE condition.
Now I need to write a where condition like [if todays date is in between fromdate and todate columns then return rows.
if FROMDATE column is null it should take minimum date 1900/01/01 if TODATE is null then date should be 9999/01/01
The query i wrote is
select * from Table where ISNULL(SUBSTRING(VALIDTO,1,8),'19000101') > = getdate()
AND ISNULL(SUBSTRING(VALIDTO,1,8),'99991231') < convert(varchar, getdate(), 112)
but it shows no data...
The database for our software stores dates and times in clarion format. I'm trying to write some custom reports in T-SQL and I need to convert these dates but it's giving me a lot of trouble. How do I query the dates and times and have the results shown as a "regular" date/time? Below is what I have so far which is really the very beginnings of this report. Basically on the results/output I need the ClarionDate and ClarionTime to be shown as typical date/time columns. I did some research on my own but I'm having a hard time grasping this. I believe they have to be pulled into a temp table and then converted?
SELECT A1.DATEOFACCESS ClarionDate, A1.TIMEOFACCESS ClarionTime, A2.NAME Event
FROM dbo.History A1
JOIN dbo.SysEvents A2
ON A1.RSVD_Action = A2.RSVD_EVENTTYPE
I am searching for a Powershell script which picks Windows Server names from SQL server table(eg: Instance.DB.tbServerList) & writes last reboot date to SQL server table(can be same or different table).
View 6 Replies View RelatedSo let's say I have a table Orders with columns: Order# and ReceiptDate. Order#'s may be duplicated (Could have same Order# with different ReceiptDate). I want to select Order#'s that go back 6 months from the last ReceiptDate for each Order#.
I can't just do something like:
SELECT *
FROM Orders
WHERE ReceiptDate >= add_months(date,-6)
because there could be Order#'s whose last ReceiptDate was earlier than 6 months ago. I want to capture all of the instances of each Order# going back 6 months from each last ReceiptDate relative to each Order#.
Im trying to change the date format to DD-MM-YYYY serverwide.
i have changed to british english in the server settings, and my user also has british english set but the date is still YYYY-MM-DD.
how i can change this?
I have this script that I'm trying to filter the results of the Job History to the day prior at 1800 hours.
It return dates prior to what I have in the WHERE clause.
What should the WHERE Clause look like?
USE msdb
Go
SELECT j.name JobName,h.step_name StepName,
CONVERT(CHAR(10), CAST(STR(h.run_date,8, 0) AS dateTIME), 111) RunDate,
STUFF(STUFF(RIGHT('000000' + CAST ( h.run_time AS VARCHAR(6 ) ) ,6),5,0,':'),3,0,':') RunTime,
h.run_duration StepDuration,
case h.run_status when 0 then 'failed'
[code]....
I would like to put a Clustered Index on a date column in a current heap, but one question/concern.This heap every month has thousands of rows deleted and even more added later. How much of an issue will this cause the Clustered Index as far as page splits? I was thinking Fill Factor of 70%.I would normally just test and still will on Dev box, but my Dev box is much smaller than production as far as power.
View 6 Replies View RelatedWhen I run this query:
SELECT orderno, *
FROM _order
WHERE order_date >= '5/14/2015 00:00:00'
AND order_date < '5/15/2015 11:59:59'
ORDER BY order_date asc
I get a result of:
A1G7222015-05-14 13:00:11.143
A1G7232015-05-14 13:33:35.407
A1G7242015-05-14 13:39:16.657
A1G7252015-05-14 14:25:43.507
A1G7262015-05-14 14:29:18.050
A1G7272015-05-14 15:38:12.263
But I know there is one more record that falls into 05/15/2015
A1G7282015-05-15 12:26:52.807
Can you see what I am missing in my query in order for me to retrieve the missing record A1G728?
What I am trying to accomplish is to make a few extra columns with specified date ranges.
I have FY14 date range in the parameters at the top .. I would like to add a FY 15 column so the year would move up by 1.and also I need to add 2 more columns Prior year current month and This year, current month.
<code>
DECLARE @Fy14_start datetime
DECLARE @Fy14_end datetime
SET @Fy14_start = '2013-07-01'
SET @Fy14_end = '2014-06-30'
SELECT x.ACCOUNT_NAME, X.STATUS_CODE, COUNT(X.PATIENT_CODE) AS FY14
[code]....
I've used some info on here to generate random dates within a given range and also random times - independently they work fine, but I can't seem to join them into a single field of datetime. I'm not sure why. The following snippet works fine as two independent fields:
select CAST(CAST(ABS(CHECKSUM(NEWID()))%(780)+(33968) AS DATETIME) as DATE) as theDate,
CAST(CAST(DATEADD(milliSECOND,ABS(CHECKSUM(NEWID()))%86400000 ,'00:00') AS TIME) as varchar(50)) as theTimeBut when I try to make it a single datetime field:
select CAST(cast(cast(CAST(ABS(CHECKSUM(NEWID()))%(780)+(33968) AS DATETIME) as date) as varchar(50)) + ' ' + cast(CAST(CAST(DATEADD(milliSECOND,ABS(CHECKSUM(NEWID()))%86400000 ,'00:00') AS TIME) as varchar(50)) as varchar(50)) as datetime)
Which returns with: Conversion failed when converting date and/or time from character string.
So what I am really looking for is a way to join those two values into a single datetime field... Or failing that that how to generate random dates within a range including random times...
Hello All!
Can anybody tell me how to add a date data type into SQL Server? I have a web application that collects data from users, and one of the data collected is the date. I would like to save that date as a date only and not as a datetime like SQL Server wants me to.
My first understanding is that, since SQL Server only allows a datetime data type, this is why it appends a time whenever a date is saved in or it appends a date whenever a time is saved in.
How do I accomplish this task of saving a date as a date only or a time as a time only? Is there a way to add a date or time data type w/in SQL Server? Or SQL Server just doesn't allow for it?
Any help is appreciated!
I have a dynamic SQL query that uses various indexes and views.
When a user wants to filter records based on last one day, last one week, last 30 days ...etc.. i use the following code:
@date is an integer.
begindate is datetime format.
begindate > cast(((select dateadd(d,@Date,GETDATE()))) as varchar(20))
The above code slows my query performance by at least 400%!
Would it be faster to add a computed column to my table, using the suggested method in the link below?
[URL] ....
Then i could add an indexed view to improve performance, or can this be done another way?
I have date field in table and data contain 2014-08-09 11:13:03.340
when I use smalldatefield I am getting 2014-08-09 11:13:00 I should have got 2014-08-09 11:13:03
Why the 03 is trimming in smalldatefield.
how do I use select query to get 2014-08-09 11:13:03 from original Date records
Looking for query that lists all databases, in an instance, that are not accessed before a given date (e.g., not accessed before December 31, 2014)?
View 6 Replies View RelatedIs it possible to find out the last executed date for any stored proc in the database using system tables or writing any other query.
View 2 Replies View RelatedTrying to use some of the data access samples with VS 2005; the error says that the database is incompatible with this version of sqlsevr.exe, which I think means that SQL Server 2005 can't read the file? I do not have the express edition installed, only SQL Server 2005.
It says "You must re-create the database".
Do I need to install SQL Server Express edition? Will this conflict with SQL Server 2005?
Can I update the express database in SQL Server 2005?
Here's my statement below. What I'm trying to get is joining the name column in master.sys.databases with a sub query for the database name, file location and backup start date from the MSDB database. The reason for this, if a new database has never been backed up, It should be returning as a NULL value, which is my goal. However, I'm getting multiple results for the backups.
select CONVERT(CHAR(100), SERVERPROPERTY('Servername')) AS Server,a.name,File_Location=b.physical_device_name,backup_start_date=max(backup_start_date)
from master.sys.databases a
left join(select c.database_name,backup_start_date=max(backup_start_date),b.physical_device_name
from msdb.dbo.backupmediafamily b join msdb.dbo.backupset c on c.media_set_id=c.backup_set_id
where c.type='D'
[Code] .....
Hi,
View 1 Replies View RelatedHi
this is my problem.
mshflexgrid converts date value from dd.mm.yyyy to yyyy-mm-dd or mm.dd.yyyy
When i use JetOLEDB & .mdb file
I can show correctly date type field in mshflexgrid with str() function.
For example
rst.open"Select str(MyDateField) from table
set mshflexgrid.datasource = rst
i can see dd.mm.yyyy ' namely good
when i dont use str() function i see mm.dd.yyyy ' bad version
Now, i'm using SQL server 2000 & mdf file.
mshflexgrid don't show correctly date field ( i want it to be like dd.mm.yyyy ) because i cant use str() function with SQL sever 2000 & mdf file
For example
rst.open"Select str(MyDateField) from table... occur error
When i want to use Convert function in SQL server 2000 & mdf file
it automaticly converts it like Jun 18 2004 12:00AM but i dont want this
I want see this 18.06.2004 in Mshflexgrid.
What can i do. help me pls.
how i can add date using ssis or data tools 2012..My flat files had no date..den my instructor gave us a database where it has recordstartdate, recordenddate and currentdate.how i suppose to add date?
tell me the steps to how to do it?