How do I append an accumulating number to duplicates in a column? I would prefer to update the table
for example
Name
John
John
Tom
Bob
Bob
Bob
Mike
to look like
Name
John
John1
Tom
Bob
Bob1
Bob2
Mike
There are 3 columns in the result set - part num, Qty and MO num. Each MO num has part numbers.So there might be same part numbers in MO's. Each part num has qty. So, if I group by part num, I get Qty.
1.There are duplicates of part.num and I want to remove duplicates and add quantities of those duplicates into one single quantity. For example, xxxx is a part num, then xxxx=1,xxxx=3,xxxx=5. I want xxxx=9. I want to sum those. Another question is, each MO has a user. I want to join user and MO num in MO.
Heres the code,
part.num , (woitem.qtytarget/wo.qtytarget) AS woitemqty,
(SELECT LIST(wo.num, ',') FROM wo INNER JOIN moitem ON wo.moitemid = moitem.id WHERE moitem.moid = mo.id) AS wonums FROM mo INNER JOIN moitem ON mo.id = moitem.moid
LEFT JOIN wo ON moitem.id = wo.moitemid
LEFT JOIN woitem ON wo.id = woitem.woid AND woitem.typeid = 10 LEFT JOIN (Select sum(woitem.qtytarget) as labor, woitem.woid, uom.code as uom from woitem JOIN part on woitem.partid = part.id and part.typeid = 21 JOIN uom on woitem.uomid = uom.id group by 2,3) as labor on wo.id = labor.woid LEFT JOIN part ON woitem.partid = part.id
I have a table #vert where I have value column. This data needs to be updated into two channel columns in #hori table based on channel number in #vert table.
CREATE TABLE #Vert (FILTER VARCHAR(3), CHANNEL TINYINT, VALUE TINYINT)
INSERT #Vert Values('ABC', 1, 22),('ABC', 2, 32),('BBC', 1, 12),('BBC', 2, 23),('CAB', 1, 33),('CAB', 2, 44) -- COMBINATION OF FILTER AND CHANNEL IS UNIQUE
CREATE TABLE #Hori (FILTER VARCHAR(3), CHANNEL1 TINYINT, CHANNEL2 TINYINT)
INSERT #Hori Values ('ABC', NULL, NULL),('BBC', NULL, NULL),('CAB', NULL, NULL) -- FILTER IS UNIQUE IN #HORI TABLE
One way to achieve this is to write two update statements. After update, the output you see is my desired output
UPDATE H
SET CHANNEL1= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=1 -- updates only channel1
UPDATE H
SET CHANNEL2= VALUE
FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER
WHERE V.CHANNEL=2 -- updates only channel2
SELECT * FROM #Hori -- this is desired output
my channels number grows in #vert table like 1,2,3,4...and so Channel3, Channel4....so on in #hori table. So I cannot keep writing too many update statements. One other way is to pivot #vert table and do single update into #hori table.
I have a table containing the following data:
LinkingIDID1 ID2
166202180659253178
166202253178180659
166334180380253179
166334253179180380
166342180380180659
166342180659180380
166582253179258643
166582258643253179
264052258642258643
264052258643258642
264502258643258663
264502258643259562
Within the LinkingID, there are duplicates in ID1 and ID2 but just in opposite columns. I have been trying to figure out a way to remove these set based. It doesn't matter which duplicate is removed. Essentially these are just endpoints and I don't care which side they are on. The solution must recognize the duplicates and not just remove based on every 2nd row.
I am having a main table and temptable.
Every sunday, new data will be loaded from temptable to main table. I have to make sure that, duplicates does not get loaded from temptable to maintable.
For example, if last sunday a record gets loaded from temp to main. If this sunday also the same record is present then it means that is a duplicate.
The duplicate is decided on below scenario
select 'CodeChanges: ', count(*) from CodeChanges a, CodeChanges_Temp b
where a.AccountNumber = b.AccountNumber and
a.HexaNumber = b.HexaNumber and
a.HexaEffDate = b.HexaEffDate and
a.HexaId = b.HexaId and
[Code] ...
Yesterday (Sunday) , data from temp got loaded onto maintable but with duplicates.
There is a log which just displays number of duplicates.
Yesterday the log displayed 8 duplicates found. I need to find out the 8 duplicates which got loaded yesterday and delete it off from main table.
There is a column in both tables which is 'creation date and time'. Every Sunday when the load happens this column will have that day's date .
Now i need to find out what are all the duplicates which got loaded on this sunday.
The total rows in temp table is : 363
No of duplicates present is : 8
I used below query to find out the duplicates but it is returning all the 363 rows from the maintable instead of the 8 duplicates.
Select 'CodeChanges: ', * from CodeChanges a where
exists
( Select 1 from CodeChanges_Temp b where
a.HexaNumber = b.HexaNumber and
a.HexaEffDate = b.HexaEffDate and
[Code] ...
Need finding the duplicate records which has creation date time as '2015-11-01 00:00:00.000' and all the above columns mentioned in the query matches.
Example
Few colums only metioned below
creationdateandtime HexaNumber HexaCode
1. 1987-10-01 00:00:00.000 5 3
2. 2015-11-01 00:00:00.000 5 3
So here the second record is duplicate. This is what I am trying to find.
I'm running a update on a table and it appears to work. But when I check the data about 10 mins later it has been reversed back to the original form!
View 9 Replies View RelatedWe have a database on a 2005 box, which we need to keep in sync with one on a 2014 box (until we can turn off the one on 2005). The 2005 database is still being updated with changes that must be applied to the 2014 database, given the nature of the data (medical documents) we need to ensure updates are applied to the 2014 database in very near real time (these changes are - for example - statuses, not the documents themselves).
Cunning plan #1, ulgy - not at all a fan of triggers - but use an after update trigger to run a sp on the remote box via a linked server in this format, with a SQL Server login for the linked server with permissions to EXEC the remote proc.
CREATE TRIGGER [dbo].[SourceUpdate] ON [dbo].[SourceTable]
AFTER UPDATE
AS
SET XACT_ABORT ON;
SET NOCOUNT ON;
IF UPDATE(ColumnName)
[Code] ....
However, while the sp can be run against the linked server as a standalone query OK, when running it in a trigger it's throwing
OLE DB provider "SQLNCLI" for linked server "WIBBLE" returned message "The transaction manager has disabled its support for remote/network transactions.".
Msg 7391, Level 16, State 2, Procedure TheAfterUpdateTrigger, Line 19
The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "WIBBLE" was unable to begin a distributed transaction.
Whether it actually possible to call a proc on a remote box via a trigger and if so what additional hoops need to be jumped through (like I said, it'll run OK called via SSMS)?
I have this script in my database, but it always gives 2054 rows back and if I actually DO change something it doesn't even notice...
UPDATE a
SET a.[omschrijving]=SP.[omschrijving]
,a.[verkoopprijs]=SP.[verkoopprijs]
,a.[gewijzigd]=getDate()
FROM [artikelen] a
LEFT OUTER JOIN [Hofstede].[dbo].[sparepartsupdate] SP
ON a.PartNrFabrikant = sp.PartNrFabrikant
WHERE ((A.omschrijving != SP.[omschrijving]) OR (A.[verkoopprijs] != SP.[verkoopprijs]))
I have a main table called Stock for example.
One process ( a service ) inserts data into this table , as well as updates certain fields of the table periodically.
Another process ( SQL Job ) updates the table with certain defaults and rules that are unknown to the service - to deal with some calculations and removal of null values where we can estimate the values etc.
These 2 processes have started to deadlock each other horribly.
The SQL Job calls one stored procedure that has around 10 statements in it. This stored proc runs every minute. Most of them are of the form below - the idea being that once this has corrected the data - the update will not affect these rows again. I guess there are read locks on the selecting part of this query - but usually it updates 0 rows - so I am wondering if there are still locks taken ?
UPDATE s
SET equivQty = Qty * ISNULL(p.Factor,4.5) / 4.5
FROM Stock s
LEFT OUTER JOIN Pack p
on s.Product = p.ProductId
AND s.Pack = p.PackId
WHERE ISNULL(equivQty,0) <> Qty * ISNULL(p.Factor,4.5) / 4.5
The deadlocks are always between these statements from the stored procedure - and the service updating rows. I can't really see how the deadlocks occur but they do.
Another suggestion has been to try and use an exists before the update as below
IF EXISTS( SELECT based on above criteria )
( UPDATE as before )
Does this reduce the locking at all ? I don't know how to test the theory - i added this code to some of the statements, and it didn't seem to make much difference ?
Is there a way to make a process ( in my case the stored procedure ) - give up if it can't aquire the locks rather than being deadlocked - which leads to job failures and emails etc ?
We are currently trying to filter down the data that is updated to be only the last few months - to reduce the amount of rows even analyzed - as the deadlocking does seem to be impacted by the number of rows in the tables.
--===== If the test table already exists, drop it
IF OBJECT_ID('TempDB..#mytable','U') IS NOT NULL
DROP TABLE #mytable
--===== Create the test table with
CREATE TABLE #mytable
(
EMP_ID INT,
Title varchar(50),
DateValue DATETIME,
TITLE_YEAR INT,
[code]....
I am new to this level of coding in SQL SERVER 2012, but I am looking to update the TITLE_YEAR field in the temp table with the Year the employee is in that title. For example for employee 11127 the data should look like this:
EMP_IDTitle DateValue TITLE_YEAR
3 Senior Consultant 2009-01-01 00:00:00.0001
3 Director 2010-01-01 00:00:00.0001
3 Director 2011-01-01 00:00:00.0002
3 Director 2012-01-01 00:00:00.0003
3 Director 2013-01-01 00:00:00.0004
3 Senior Director 2014-01-01 00:00:00.0001
I have got 4 MS Access Database Files, which have got 3 Tables each, means Total 12 Tables which gets updated with new data every evening, by an external application. Means new data gets appended to all these 12 Tables.
I want to have exact same 4 Databases, which have got 3 Tables each, means Total 12 Tables, but WITHIN MS SQL SERVER. And then update all of these 12 Tables every evening, with the corresponding updates from the respective tables from the MS Access Databases.
I do not want to Manually Update all these 12 tables every evening into SQL Server. Hopefully there would be some easier method to do this in automatic manner.
I have the following table
DECLARE @TABLE1 TABLE (D_ID int, C_ID int, C_HIST_ID int)
INSERT INTO @TABLE1
VALUES(1000016,71,77),
(1000017,71,547),
(1000017,71,553),
(1000017,71,564),
(1000013,71,565),
(1000017,71,3329),
(1000017,71,3330)
SELECT * FROM @TABLE1 ORDER BY C_HIST_ID
D_ID C_IDC_HIST_ID
10000167177
100001771547
100001771553
100001771564
100001371565
1000017713329
1000017713330
I was able to get the following result
SELECT D_ID,C_ID,C_HIST_ID
FROM @TABLE1 ACH
WHERE ACH.C_ID= 71
AND ACH.C_HIST_ID IN (SELECT MAX(ACH1.C_HIST_ID) FROM @TABLE1 ACH1
WHERE ACH1.C_ID = ACH.C_ID
AND ACH.D_ID = ACH1.D_ID )
ORDER BY C_HIST_ID
D_ID C_IDC_HIST_ID
10000167177
100001371565
1000017713330
But the result I need is
D_ID C_IDC_HIST_ID
10000167177
100001771564
100001371565
1000017713330
C_HIST_ID = 564, which I'm unable to get it through my query...
I want to set a default value to a column while adding it.
Create table test(id int )
insert into Test values(123)
alter table test add column2 int default(0)
In the above query I have set the default value, but it will not set the default value to the already inserted columns.
So how to set a default value for the already inserted rows, while adding a new column to it ?
I'm working on databases where statistics of some indexes (tables) are changing too frequently. Once I update them manually, one minute after they get 10-20% change, and five minutes after they get over 100% change. Tables get updated very frequently (multiple times in a second).
When I run a query to read from sys.stats, sys.dm_db_stats_properties and other dynamic views, I see that they were last updated when I did it manually, but the change rate overpassed the 500+20% (tables have multiples of 10K rows). Auto create and update statistics are set to true on all databases, and I don't know why sql server does not do that automatically.
I have a job scheduled that imports a table from a Oracle database. The job runs at 3am and reports success. But for some reason when i query the table to see how many records there are, I see the same row count as the day before (it should increase everyday- student enrollment). When i execute the package manually, the table updates fine.
SQL Server 2014/Win7 x64.
We face slow performance issue for like taking long time for same query execution after We apply index rebuild and reorganize index. But, after execution of query or procedure for 2 -3 times, performance will be faster. I have following questions
1 do we need to update stats after we rebuild an reorganize index.
2. is it will be slow for 1-2 times for every query and stored procedure execution after we rebuild and reorganize index?
I have data like this in the table :
IntRecpieID strName intMealtypeID Total
100 ‘A’ 1 20
101 'B' 2 30
100 'A' 3 40
Desired Output required:
IntRecpieID StrName 1 2 3
100 'A' 20 Null 40
101 'B' Null 30 Null
I am new in SQL Server, What to check ,what action do i need to take while adding a new column to a table.
View 5 Replies View RelatedI have a table with some rows and columns what i want is i want to Show sum of particular column in the last row. This is my code.
SELECT DISTINCT Cluster.ClusterName, Gruppe.GruppeName, Arbeitspaket.ArbeitspaketName, BMWProjekt, AnzahlAP, Abgerechnet, InBearbeitung, Billanz FROM Bestellung
INNER JOIN Cluster ON Bestellung.Cluster = Cluster.rowid
INNER JOIN Arbeitspaket ON Bestellung.Arbeitspaket = Arbeitspaket.rowid
INNER JOIN Gruppe ON Bestellung.Gruppe = Gruppe.rowid
WHERE Projekt ="EA-284-Nxx" AND AnzahlAP <> 0 AND Abgerechnet is 1 AND InBearbeitung is NULL AND Billanz is NULL;
I've data as below
account period01 period02 period03 period04
1111 null null null null
1112 782 null null null
1113 null null null 345
1114 765 882 67 321
What I want to achieve is to get values from period1 till period04 and used the lasted value to code the value of accoutperiod, if value is from period1 then code it as 01, period2 as 02, period03 as 03 and period04 as 04. So the output should be like this
account period01 period02 period03 period04 accoutPeriod
1111 null null null null null
1112 782 null null null 01
1113 null null null 345 04
1114 765 882 67 321 04
If you were to do a fresh install it would set permissions on the disk so everything just works.
Now when changing the service account (e.g. to a domain user) use the configuration manager, does it do the same magic (possibly sans if the database data/log files are on another disk)? Or do you need to trawl through the dozens of folders and assign rights manually?
I am trying to execute a stored procedure to update a table and I am getting Invalid Object Name. I am create a cte named Darin_Import_With_Key and I am trying to update table [dbo].[Darin_Address_File]. If I remove one of the update statements it works fine it just doesn't like trying to execute both. The message I am getting is Msg 208, Level 16, State 1, Line 58 Invalid object name 'Darin_Import_With_Key'.
BEGIN
SET NOCOUNT ON;
WITH Darin_Import_With_Key
AS
(
SELECT [pra_id]
,[pra_ClientPracID]
[code]....
Hi All,
When I use the following I get an error because of duplicate records in my table.
Update person
Set username = (Select update_person
Hi All,
When I use the following I get an error. I think it is because of duplicate records in my table.
Update person
Set username = (Select username
From update_person
Where person.firsname = update_person.firstname
and person.lastname = update_person.lastname)
There are a few users that have the same first and last name. How can I ignore the duplicate records and continue to update the table?
Thanks in advance.
I have a database it is 50 gb with hundreds of columns. I would like to choose a certain column and convert the data in it to .csv or excel file. How can I do that I am very new to MSSQL...
View 1 Replies View RelatedI want to fetch max of Field2 if duplicate records in Field1 and rest of the values of field1 , below is the sample format.
Field1 Field2 Field3 Field4
32 375 abc-xyz A
32 379 xyz-efg A
55 405 abc-xyz B
55 407 xyz-efg B
132 908 abc-xyz C
132 999 xyz-efg C
152 800 abc-xyz D
152 850 xyz-efg D
155 900 abc-xyz E
156 925 abc-xyz F
157 935 abc-xyz G
I am trying to import 1 spreadsheet to a database table. I am using SSMS export import wizard to import spreadsheet. My goal is to import whole spreadsheet in one single column.
View 7 Replies View RelatedI have huge export files in a DB and i need to check if there are any datasets that have the same value in the first column, but a different in another one, via a query of course.
Like this:
ID IS NULL
1 1
2 1
3 0
1 0
The expected ID i get as a result of my query should be 1 in this case.
I have a situation where I have Table A, Table B.
View C is created by joining table A and table B.
I have written a instead of trigger D on view C.
I do not insert/update/delete on the view directly.
For every insert/update in table A /B the values should get insert/update in the view respectively. This insert/update on view should invoke the trigger.
And I am unable to see this trigger work on the view if any insert/update occurs on base table level.
Trigger is working only if any operation is done directly on the view.
We have a table with 2 columns 'OrderNo' and 'Amount' as below
ORDERNO | AMOUNT
1D1ZX000 | 9262.5
1D1ZX001 | 9000.0
1D1ZX001 | 9000.0
1D1ZX002 | 10000
1D1ZX003 | 1000
1D1ZX003 | 200.50
1D1ZX003 | 100.50
1D1ZX004 | 500.0
1D1ZX004 | 1000
1D1ZX004 | 2000
1D1ZX004 | 1000
as per my client requirement we need subtotal of 'Amount' group by 'OrderNo'. column so am writing a select statement with WHERE condition and I would like to have another column called SUBTOTAL in the result set (select statement result) with subtotals for that order Number as below
ORDERNO | AMOUNT | SubTotal
1D1ZX000 | 9262.5 | 9262.5
1D1ZX001 | 9000.0 | 18000
1D1ZX001 | 9000.0 | 18000
1D1ZX002 | 10000 | 10000
1D1ZX003 | 1000.0 | 3001
1D1ZX003 | 2000.5 | 3001
1D1ZX003 | 1000.5 | 3001
1D1ZX004 | 500.00 | 4500
1D1ZX004 | 1000.0 | 4500
1D1ZX004 | 2000.0 | 4500
1D1ZX004 | 1000.0 | 4500
I have the following SQL which i want to convert to a stored procedure having dynamic SQL to generate column numbers (1 to 52) for Sale_Week. Also, I want to call this stored procedure from Excel using VBA, passing 2 parameters to stored procedure in SQL Server
e.g,
DECLARE @KPI nvarchar(MAX) = 'Sales Value with Innovation' DECLARE @Country nvarchar(MAX) = 'UK'
I want to grab the resultant pivoted table back into excel. how to do it?
USE [Database_ABC]
GO
DECLARE @KPI nvarchar(MAX) = 'Sales Value with Innovation'
DECLARE @Country nvarchar(MAX) = 'UK'
SELECT [sCHAR],[sCOUNTRY],[Category],[Manufacturer],[Brand],[Description],[1],[2],
[3],[4],[5],[6],[7],[8],[9],[10],[11],[12],[13],[14],[15],[16],[17],[18],[19],[20],
[Code] ....
I am looking for SQL query which uses 2 tables CASH and BALANCE.
eg: Need Tablename, ColumsList and data in the results set.
eg: 10 rows shown below and ordered based on Acct_number
Row1,CASH,ACCT_NUMBER,AMOUNT,DEBIT_CREDIT_FLAG,ENTITY,BUSINESS_DATE,CURRENCY,REFERENCE,TRADE_TYPE,SUB ACC CODE
Row2,BALANCE,ACCT_NUMBER,OPENING_BALANCE,CLOSING_BALANCE,CLOSING_BAL_DEBIT_CREDIT_FLAG,BUSINESS_DATE,CURRENCY
Row3,CASH,10,500,CR,ABC,12/12/2014,USD,INTL,,US05
Row4,CASH,10,1000,DR,DEF,12/12/2014,USD,DOM,,US07
Row5,CASH,10,75,DR,XYZ,12/12/2014,USD,DOM,,US05
Row6,BALANCE,10,500,750,DR,12/12/2014,USD
Row7,CASH,20,500,CR,ABC,12/12/2014,USD,INTL,,US05
Row8,CASH,20,1000,DR,DEF,12/12/2014,USD,DOM,,US07
Row9,CASH,20,75,DR,XYZ,12/12/2014,USD,DOM,,US05
Row10,BALANCE,20,500,750,DR,12/12/2014,USD
I have the following 2 Query's - case when Table has no Identity Column and other with identity Column . I am planning to make it to single Query .
Query 1:
SELECT @ColumnNamesWhenNoIdentity = COALESCE(@ColumnNamesWhenNoIdentity + ',', '') + Name +'= SOURCE.'+Name
FROM sys.columns WITH(NOLOCK) WHERE object_id =
(
SELECT sys.objects.object_id
FROM sys.objects WITH(NOLOCK)
INNER JOIN sys.schemas WITH(NOLOCK) ON sys.objects.schema_id = sys.schemas.schema_id
WHERE sys.objects.TYPE = 'U' AND sys.objects.Name = 'Testing1' AND sys.schemas.Name ='dbo'
)
Query2:
SELECT @ColumnNamesWhenNoIdentity = COALESCE(@ColumnNamesWhenNoIdentity + ',', '') + Name +'= SOURCE.'+Name
FROM sys.columns WITH(NOLOCK) WHERE is_identity != 1 AND object_id =
(SELECT sys.objects.object_id FROM sys.objects WITH(NOLOCK)
INNER JOIN sys.schemas WITH(NOLOCK) ON sys.objects.schema_id = sys.schemas.schema_id
WHERE sys.objects.TYPE = 'U' AND sys.objects.Name = 'Testing2' AND sys.schemas.Name ='dbo'
)