I'm trying to convert a varchar value to datetime format but it throwing below error:
The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
here is sample query:
declare @test varchar(20)
set @test ='30/04/2015 23:59:59'
select CONVERT(datetime, @test)
One interesting observation above query run fines in Sql 2008 but not in Sql 2014...
I have column moddat which is of varchar(10,null)
Here is my data:
20020415
20020508
19991104
19990701
20040514
20021112
20020124
19990628
20020514
20010822
I want those data in this format YYYY-MM-DD
How to convert varchar to datetime?
I have problem to execute query with interval date.
If try this query I don't have problem and the output is correct:
SELECT * FROM dotable
WHERE
dotableDate BETWEEN CONVERT (datetime, '01/01/2015', 121)
AND CONVERT (datetime, '09/01/2015', 121);Instead if try this I have error:
SELECT * FROM dotable
WHERE
dotableDate BETWEEN CONVERT (datetime, '25/01/2015', 121)
AND CONVERT (datetime, '28/01/2015', 121);
[Err] 22007 - [SQL Server]The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
Basically, I'm trying to take two dates and find the difference in hours b/t the two, sql server 2000. I've tried change the variables out from datetime to varchars even though it shouldn't matter. When I put the block of code out of the stored procedure and run it in line it works fine, I'M LOST.........
I get the errors everytime it runs into the first block, I get the error again when the block is hit again farther down in the procedure. I get:
Server: Msg 242, Level 16, State 3, Procedure tmpRyan_spRail_Job_NoMovement, Line 211
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
Server: Msg 242, Level 16, State 1, Procedure tmpRyan_spRail_Job_NoMovement, Line 360
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
ERR dates Aug 4 2005 11:16PM.
Server: Msg 242, Level 16, State 3, Procedure tmpRyan_spRail_Job_NoMovement, Line 211
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
Server: Msg 242, Level 16, State 1, Procedure tmpRyan_spRail_Job_NoMovement, Line 360
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
ERR dates Aug 3 2005 12:35PM.
Server: Msg 241, Level 16, State 1, Procedure tmpRyan_spRail_Job_NoMovement, Line 211
Syntax error converting datetime from character string.
Code:
Declare
,@CodePair varchar(10
,@CodePairTimeDiff dec ,
@tmpTimeVar datetime ,
@tmpTimeCharVar varchar(30)
IF @NextStatusDate IS NOT NULL AND @StatusDate IS NOT NULL
BEGIN
set @tmpTimeCharVar = DATEDIFF(SECOND, @NextSTatusDate, @StatusDate)
set @tmpTimeVar =
(
CASE WHEN @tmpTimeCharVar/3600<10 THEN '0' ELSE '' END
+ RTRIM(DATEDIFF(SECOND,@NextSTatusDate, @StatusDate)/3600)
+ ':' + RIGHT('0'+RTRIM((@tmpTimeCharVar % 3600) / 60),2)
+ ':' + RIGHT('0'+RTRIM((@tmpTimeCharVar % 3600) % 60),2)
)
END
IF @@ERROR <>0
PRINT 'ERR dates' + Convert(varchar(20), @NextStatusDate) + '.'
inside update statement
,CodePairTimeDiff = CONVERT(dec, (100 * DATEPART(HOUR, @tmpTimeVar)
+ DATEPART(MINUTE, @tmpTimeVar))) / 60
When you converting varchar to date time
SELECT convert(varchar,getdate())
What is the getdate here
i.e. we are converting any value to today's date
Hello,
I have this column of time values:
00:00:03.3592675
00:00:00
00:00:03.8592515
00:00:03.6873820
00:00:03.8436270
00:00:03.3436430
It is in varchar format. I tried converting it to datetime but get an invalid format error message.
How can I sum up these values and average them out?
Thanks!
--PhB
Is there a way of converting a datetime data type in the form [DD/MM/YYYY HH:MM:SS] to an integer containing just the time in the form [HHMMSS].
View 1 Replies View RelatedI am using SSIS to load raw files into database. In my files I have columns Date which has format
1/1/2010 12:00:00 PM.
I want to load this column in format 1/1/2010 24:00:00. I mean in 24 hour format.
How do I pass a variable to an INT calculation?
CREATE PROC CLEAR_MY_TABLE
@TableStat varchar(30)
AS
If OBJECT_ID('MyDB.dbo.' + @TableStat + '') is not null
BEGIN
---PRINT 'I FOUND THE TABLE'
DECLARE @count INT = -1;
SELECT @count = (Select COUNT(*) FROM [dbo]. + @TableStat);
IF (@count > 0)
BEGIN
TRUNCATE TABLE @TABLESTAT
END
Within in Visual Studio 2012 solution, I have several projects, one of which is a Database project. I am defining several tables. The one in question is:
CREATE TABLE [dbo].[tblKppHierarchyPcl]
(
[ID] NUMERIC(18,0) NOT NULL,
[Name] VARCHAR(500),
[PartStructureKey] NUMERIC(18,0) NOT NULL,
[PartNumber] VARCHAR(500) NOT NULL,
[ParentPartNumber] VARCHAR(500) NULL,
[code]...
Error SQL72014: .Net SqlClient Data Provider: Msg 245, Level 16, State 1, Line 76 Conversion.failed when converting the varchar value 'Coolant Quick Disconnect' to data type int.So it has a problem with inserting 'Coolant Quick Disconnect' into the Name column. The Name column is CLEARLY a varchar column but somehow it thinks it's an int column.
The database for our software stores dates and times in clarion format. I'm trying to write some custom reports in T-SQL and I need to convert these dates but it's giving me a lot of trouble. How do I query the dates and times and have the results shown as a "regular" date/time? Below is what I have so far which is really the very beginnings of this report. Basically on the results/output I need the ClarionDate and ClarionTime to be shown as typical date/time columns. I did some research on my own but I'm having a hard time grasping this. I believe they have to be pulled into a temp table and then converted?
SELECT A1.DATEOFACCESS ClarionDate, A1.TIMEOFACCESS ClarionTime, A2.NAME Event
FROM dbo.History A1
JOIN dbo.SysEvents A2
ON A1.RSVD_Action = A2.RSVD_EVENTTYPE
I am getting the following message when trying to run the below sql
Msg 245, Level 16, State 1, Line 15
Conversion failed when converting the varchar value 'Select COUNT(*) From Adventures.dbo.tblLibrary' to data type int.
Declare @Datestart as Date
Declare @CntBefore as int
Declare @CntNow as int
Declare @Database as varchar(30)
Declare @TableName as varchar(60)
[Code] ....
I am doing a Case statement to create a unified field for account type and vendor, in the code below I am receiving the error in the subject, because the account numbers have alpha characters in the string, I need to make them as OTHER if the first 2 left chars are Alpha, I thought how I have ISNUMERIC would do that but I am still getting the error.
I am also including example of how the account_numbers are formatted.
R222209
R222220
R222222
R222212
R221123
F707768
[Code] .....
We are migrating data from old DB2 systems to sql server 2012, the DATE FORMAT in those systems is in decimal format with 7 digits. CYYMMDD format.
I need to convert this into DD/MM/YYYY format.
I am using a custom sql query to import data into Tableau. Problem is I need to change the varchar column data in SQL currently returning 18/01/2014 08:35:13 as a format into the date format 05/21/2014 3:55:51 PM before I can use it.
View 9 Replies View RelatedI'm using a VB 6.0 front end with a date variable
that throws a SQL 2005 datetime conversion error in the following UPDATE query:
UPDATE MYTable
SET Feild1 = 'VBVar1', Field2='VBVar2'
WHERE MydateField = 'VBdateVar'
I'm guessing that I probably am missing some appropriate method for passing the date datatype variable to SQL
Can anyone help me
Thanks
I am facing an issue
1:- From Source system ,I am getting dates like ---Â
2014-Q3
2014-Q2
2014-09
As per my requirement, I need to convert this time to dates likeÂ
1:-Â 2014-Q3 Â --- Â last day of quarter 3 of 2014 . Â
2: 2014 -02 -- last day of feb 2014
Converting such format  to the dates I expect...
Hi
I have a linked server to MSAccess DB and, when I try to select record from a table that have a column
with a bad date formatted (with year less than 1753) I receive the message:
.... conversion error from DBTYPE_DBTIMESTAMP to datetime....
My scope is set to NULL this bad values from Sql Server ...
I first try with something like
UPDATE LNK_SVR...TABLE SET FLD=NULL WHERE ISDATE(FLD)=0
But I receive the same error... perheaps the provider generate the error before an Sql Server evaluation ...
So I think to a passthrought query:
exec sp_serveroption @server='LNK_SVR',@optname='rpc out',@optvalue='true'
exec LNK_SVR...sp_executesql 'update table set FLD=NULL WHERE YEAR(FLD)<1753'
But I receive the folowing message ....
Messaggio 7213, livello 16, stato 1, riga 1
Il provider non è riuscito a passare parametri di stored procedure remota al server remoto 'LNK_SVR. Verificare che il numero, l'ordine e il valore dei parametri passati siano corretti.
Any suggestion is appreciate.
Thanks in advance
Matteo
Mds
fix the below SP which is having cursor output with an alternate logic which can make the SP work.(may be using temp table or any other option)
CREATE PROCEDURE Get_IDS
/*
* SSMA warning messages:
* O2SS0356: Conversion from NUMBER datatype can cause data loss.
*/
@p_uid float(53),
@return_value_argument varchar(8000) OUTPUT
[code]....
Writing a SQL Function as below
the input parameter for function should be datetime of sql datetimeformat
and out put should be a string = yyyymmdd1 or yyyymmdd2
The last character 1 or 2 based on below condition
if time is between 6AM and 5.59PM then 1
if 6PM to 5.59AM then 2
I have passed createdDate from UI to Stored procedure.createdDate field declared with DateTime.it is having value 2014-07-01.I need to fetch records from the database based upon the created field.but Create_TM in database having value Date with timestamp.so how would i change the createdfield in stored procedure.
ALTER PROCEDURE [dbo].[ByDateRange]
@Feed VARCHAR(50),
@CreatedDate DATETIME
select * from Date_table where Create_TM = @CreatedDate
We have one table where we store all documents in one of the column called "Doc" with varbinary(max) data type.
We want to download those documents from sql table to windows explorer and i wrote BCP in sql 2005. And things were fine.
The format file I used there looks like this,
9.0
1
1 SQLBINARY 0 0 "" 1 Doc ""
Now we are in 2014 and when I try the same code with same format file, it hangs in the middle. So I changed the file to 12.0 instead of 9.0 but still not working.
I have 3 dropdownlist server controls on my webform for the dateofbirth field. One for the day("1", "2" format), one for the month ("Jan", "Feb" format) and one for the year("1994", "1995" format). When the submit button server control is clicked i need to concatenate the day, month and year in the format 01-jan-1994 since i have the dateofbirth field datatype as datetime in my sql server table. I have declared the date variable stored procedure as "@dateofbirth datetime". Provide me the full coding.
Thanx in advance
I have a query question.
Consider a table with the following structure:
RecordID (PK - int) - RecordDate (DateTime)
I need to find all records that fall within a 7 day period slot based on the first RecordDate of a specific slot.
Example, consider the following records:
RecordID - RecordDate
1 - 2015-04-01 14:00
2 - 2015-04-03 15:00
3 - 2015-04-03 16:05
4 - 2015-04-03 19:23
5 - 2015-04-06 09:15
6 - 2015-04-06 11:30
7 - 2015-04-07 12:00
8 - 2015-04-09 15:15
The result of the query I'd like should look something like this
1
2
5
7
8
So basically I'd like to leave record 3 and 4 out because they fall within 24 hours of record 2 and I'd like to leave record 6 out because it falls within 24 hours of record 5.I'd tried working with a CTE and set a dateadd(d, 1, recorddate), join it on itself and use a between From / To filter on the join but that didn't work. I don't think NTILE will work with this?
I am trying to convert a column (nvarchar) to date time.
Here is an example of some values:
20110905
20110901
20111003
As expected, I received the following error: 'Conversion failed when converting date and/or time from character string.'
However, I am unsure how I should approach updating the whole column. I would like the format to be '103'.
e.g.
1st March 2005 12:00:00
is showing as
01/03/2005 00:00:00
instead of
01/03/2005
Why does this happen?
Hi,I noticed that some of my Stored Procedure is not working well on the production server cause it seems that it has not the same DateTime format...(amongst other things ).Example of differences between DateTime format :-----------------------------------------------------------------------My station (SQL Express 2005) : 26/06/2007 3:17:20 PMProduction server (SQL 2005 Enteprise) : 2007-06-26 15:17:20How can i make the format of the database unchangeable so it keep the same format on the production server?I use SQL Express 2005 for coding and SQL 2005 Enteprise for production.Thanks
View 5 Replies View RelatedI have date coming to one page as a string in the following format"May 4 2005 12:00AM"
I need to query one of my tables using this date in combination of other nondate values. How can I convert this date into valid sql server datetime format before I query a database tables
Please help
hi,
How do i convert a varchar field into the datetime data type? the reason i need this lies in the requirement that in the earlier data base the column that is hlding the date value is having the data type as varchar. and in the new design the column data type is datetime. i am using sql scripts for the data migration from the older design to the newer and got stuck with this datetime convertion issue. do let me know the best possible solution.
following are the sample data that is theer in the older table for the date.
12/12/2003
1/13/2007
01132004
1-1-2004
1.2.2001
there is no uniformity of the data that is stored currently.
thnkx in adv.
rahul jha
I would like to find Query to retrieve User DataBase Startup Time from SQL server that we see in the Sql Server Log.
I was able to find the Server Startup Time but not the individual Databases .
Hi,
I am trying to access a date column up to millisecond precession. So I cast date to as follows:
Code BlockCONVERT(varchar(23),CREATE_DATE,121)
I get millisecond part as a result of query but it€™s €œ000€?.
When I try to test the format by using getDate instead of DateTime column I get right milliseconds.
CONVERT(varchar(23),GetDate(),121) --Gives right milliseconds in return
I am importing a couple SAS datasets to SQL Server 2008 for a project. The dates are in a float format, they show up as DT_R8 in SSIS. How can I convert these values to SQL server datetime? I have tried dozens of methods I found on-line with no success, I keep getting 'Arithmetic overflow error converting expression to data type datetime.' errors.
View 0 Replies View RelatedHi:
here i am giving one example with Emp table and fields ssn,empjoindate
I have a table with field empjoindate as varchar(10).I need number of employees joined between 12/23/01 and 01/04/02.I ran this query using select ssn from EMP where convert(varchar(10),empjoindate,101) between '12/23/01' and '01/04/02'.it is not fetching any data.
Please help me
Thanks
Tej