Is it possible to pivot the output data into multiple rows?
I wanted one row for deleted data and another row for Inserted data, I was looking at UNION ALL and CROSS APPLY but to no avail.
I have a table with following rows.
FY REVCODE Jul Jun
2015 BNQ 1054839 2000000
2015 FNB 89032 1000000
2015 RS 1067299 3000000
I am looking to convert it to
Month BNQ FNB RS
JUL 1054839 89032 1067299
JUN 2000000 1000000 3000000
I tried with the following and result is coming for one month i.e. JUL but not with the second Month i.e Jun
SELECT 'Jul1' AS MON, [BNQ], [FNB], [RS]
FROM
(SELECT REVENUECODE, SUM(ROUND(((Jul/31)*30),0)) AS JUL
FROM RM_USERBUDGETTBL
WHERE USERNAME='rahul' AND FY=2015
GROUP BY REVENUECODE, USERNAME
) AS SourceTable
PIVOT
(SUM(JUL) FOR REVENUECODE IN ([BNQ], [FNB], [RS])) AS PivotTable
Results:
MONTHBNQ FNB RS
Jul11054839 89032 1067299
I am trying to pivot my data results so that instead of showing multiple rows for each product a client has it will show one line for each client and concatenate all of their products together.
For example, if I run the following query:
SELECT
[Year],
[Client_Name],
[Product_Name]
FROM My.dbo.Table
GROUP BY
[Year],
[Client_Name],
[Product_Name]
I get the following result set:
YearClient_NameProduct_Name
2014BobHosting
2014BobDevelopment
2014BobTesting
2014FredDevelopment
2014FredConsulting
2014MaxConsulting
2015BobHosting
2015BobTesting
What I want to get back as the result set is the following:
YearClient NameProduct-List
2014BobHosting-Development-Testing
2014FredDevelopment-Consulting
2014MaxConsulting
2015BobHosting-Testing
So, I would only get one record back for each Client for each Year with a list of all of their products concatenated together.
We have the below query which is pulling in Sales and Revenue information. Since the sale is recorded in just one month and the revenue is recorded each month, we need to have the results of this query to only list the Sales amount once, but still have all the other revenue amounts listed for each month. In this example, the sale is record in year 2014 and month 10, but there are revenues in every month as well for the rest of 2014 and the start of 2015 but we only want to the sales amount to appear once on this results set.
SELECT
project.project_number,
project.country_code,
project.project_desc,
gsl.global_service_line_desc,
buy.buyer_desc,
[Code] ....
Can I force the following measure to be visible for all rows in a pivot table?
Sales Special Visibility:=IF(
HASONEVALUE(dimSalesCompanies[SalesCompany])
;IF(
VALUES(dimSalesCompanies[SalesCompany]) = "Sales"
;CALCULATE([Sales];ALL(dimSalesCompanies[SalesCompany]))
;[Sales]
)
;BLANK()
)
FYI, I also have other measures as well in the pivot table that I don't want to affect.
I have a single table that consist of 4 columns. Entity, ParamName, ParamsValue and ParamiValue. This table stores normalized Late Fee related parameters for apartments. The Entity field contains a code that identifies the apartment complex. The ParamName in a textual field that contains the name of the parameter that the other 2 fields define the value for; ParamsValue and ParamiValue. If the Late Fee parameter (as named in ParamName is something numerical then the value for that parameter can be found in ParamiValue else its in ParamsValue.
I don't know if 'Pivot' is the correct term to use for describing what I am trying to do because I've looked at the Pivot examples and I don't see how that will work for this. Using the Table and data as provided below, how would I construct a query so that I get 1 row per Entity in which the columns are the ParamsValue or ParamiValue for the ParamName listed in the column header (for the query)?
Below is the DDL to create the table and populate it.
USE [DBA_UTIL]
CREATE TABLE [dbo].[PARAMEXAMPLE](
[Entity] [varchar](16) NULL,
[Code]....
I inherited a database with Street, CrossStreet1 and CrossStreet2. I wish to read the row once and output 3 rows.
I know I can run 3 separate query's but why read through 1 million rows 3 times, if you can read through it once.
I can do this in SAS using the output statement.
Hoping someone knows how to do this in SQL.
:confused:
Hello All,
I am trying to convert the rows in a table to columns. I have found similar threads on the forum addressing this issue on a high level suggesting the use of cursors, PIVOT Transform, and other means. However, I would appreciate if someone can provide a concrete example in T-Sql for the following subset of my problem.
Consider that we have Product Category, Product and its monthly sales information retrieved as follows:
CategoryID
ProductID
ProductName
Month
UnitPrice
QtySold
SalesAmount
1
1
Panel
Jan
5
10
50
1
1
Panel
Feb
5
15
75
1
1
Panel
Mar
5
20
100
1
2
Frame
Jan
10
30
300
1
2
Frame
Feb
10
25
250
1
2
Frame
Mar
10
20
200
1
3
Glass
Jan
20
10
200
1
3
Glass
Feb
20
20
400
1
3
Glass
Mar
20
30
600
I would like it to be converted into following result set:
CategoryID
ProductID
ProductName
UnitPrice
QtySold_Jan
SalesAmt_Jan
QtySold_Feb
SalesAmt_Feb
QtySold_Mar
SalesAmt_Mar
1
1
Panel
5
10
50
15
75
20
100
1
2
Frame
10
30
300
25
250
20
200
1
3
Glass
20
10
200
20
400
30
600
I have purposefully included QtySold here as I need to display both Quantity and Sales as measured column groups in my report. Can this be achieved in sql? I would appreciate any responses.
Thanks.
I'm a web developer who writes transact-SQL to make my web applications run properly. I'm not real strong in other areas of SQL. Let me explain our set-up and then I'll explain what I want to do:
We have an ecommerce web site and all sales are saved in a SQL Server 2008 R2 database at our hosting company. We also have a local Windows 2012 network that has SQL Server 2014 Express installed.
Here is what I want to do:
I want to copy sales rows from the SQL Server 2008 database at our hosting company and save them in the SQL Server 2014 Express database on our local Windows 2012 server. I'd like to automate this if possible so that it happens each night perhaps. I know there is a way to schedule SQL jobs but I've never actually done this. I also would need to know how to attach to our hosting company DB as well as our local network DB.
I want to count the rows in the Incident Table by using filters to limit the rows to be counted if they meet the below conditions. I know I need a logical test for each row of the incident table based on the apparatus table’s rows. But, I want to test for each row in the incident table, counting, but not returning a true or false in the overall measure.Something like look at each incident row, test for true or false and then count IF the statement is true. Then go to the next incident row and do the same. The aggregation would be the final count of “true” results.I tried this for MET objective:
=CALCULATE(COUNTROWS(incident),
apparatus[Incident Response Time] >-1 ||
apparatus[Incident Response Time] <320,
uv_901APP_TYPE[Description]="Engine",
uv_901INCIDENT[Top_Category]="Fire"
[code]....
I want to do something with error checking in my company. For this we have a selection of different tables and the data needs to meet various validation rules else it is classed as an error.
To deal with this I'm currently thinking of this approach:
1. Create a view pulling all of the various data together from the multiple tables.
2. Create an empty 'errors' data table.
3. Create an Excel file with a button to call a Check for Errors Script
Then in the the script:
1. Clear the 'errors' data table
2. Call multiple scripts, each of which uses the new view, applies the checks for that specific error and writes any erroring data into the 'errors' data table (along with a text string with the unique error code for filtering / sorting purposes).
3. After calling all the scripts, the table can be refreshed in excel when when used with a pivot table can show the various errors, and let us drill down into all the data so we can fix them.
Also.. Ideally, I'd like some way to write comments in an excel column for each entry and error code and be able to write that back into a comment table.
I read , When sql server Database having multiple data files within single filegroup then sql server writes data in multiple proportional file algorithm where the amount of data written to a file is proportionate to the amount of free space in that file, compared to other files in the filegroup.
so if there is no filegroups created and multiple secondary files are attached in databse , is there same way data stored and writes data in multiple files by the same algorithm or any different way.
I have one excel sheet contains 50 sub sheets with different names on it. Is it possible can i load all sheets into SQL using SSIS?
View 2 Replies View RelatedA little background on what I am trying to achieve first. We are moving to Azure virtual machines and we will have 8 disks on the SQL Server box. I am adding more files to the primary file group and each file will go on its own drive. I am then rebalancing data across these files by rebuilding all of the indexes on the tables which is working fine. No problems so far all is good.
I now have an additional problem. If there is a lob or blob column on the table, rebuilding the clustered index and all the non clustered indexes doesn't rebalance the blob or lob data across the disks such as it does with in row data.
I cannot find any articles on rebalancing lob or blob data because all the articles say to move to a new file group. I do not want a new file group, I just want to use the primary file group where the data already resides, and just redistribute it evenly in the same way that I can in row data which is working fine.
One solution I thought about was to BCP data out of the table, truncate the table and then BCP back into the table which I imagine would have the desired effect of distributing the data evenly over the files.
I want to pivot a table something like this .I pivoted it successfully but the results are not correct.
Here is the example :
install-Name Fiscal year Question Answer
Washington 2010 what is the reason for install? tttttt ggg yttt o
washington 2010 reason id 12345
washington 2010 install start date 10/10/2010
washington 2010 install end date 10/12/2010
washington 2010 install status successfull
[code]....
I want the above data to get pivoted like this
Install-name | Fiscal year |what is the reason for install? | reason id | install start date | install end date |
install status |Do you feel the install is incomplete? | Is the expiration of 90 days exceeded? |
washington | 2010 | tttttt ggg yttt o | 12345 | 10/10/2010 | 10/12/2010 |
successful | | |
washington | 2010 | trtbnbthwgt hrgthjrt | - | 12/3/2010 | 12/8/2010 |
| | |
washington | 2011 | sbjeh dhebwdh dbjw | 345 | 10/10/2010 | 10/12/2010 |
successful | No | Yes ,but b b b b |
The first select is running fine but due to extra values added to the table the list of manual difined columns must be added manualy each time new values occur.
Is it possible to make the PIVOT's IN clause dynamicly as stated in the second script (it is based on the same table #source) when running it prompts the next error;
Msg 156, Level 15, State 1, Line 315
Incorrect syntax near the keyword 'select'.
Msg 102, Level 15, State 1, Line 315
Incorrect syntax near ')'.
adding or moving ')' or '(' are not working.......
select *
into #temp
from #source
pivot ( avg(value) for drive in ([C], [D], [E], [F], [G], [H], [T], [U], [V] )) as value
select * from #temp order by .........
versus
select *
into #temp
from #source
pivot ( avg(value) for drive in (select distinct(column) from #source)) as value
select * from #temp order by .....
I have the following SQL which i want to convert to a stored procedure having dynamic SQL to generate column numbers (1 to 52) for Sale_Week. Also, I want to call this stored procedure from Excel using VBA, passing 2 parameters to stored procedure in SQL Server
e.g,
DECLARE @KPI nvarchar(MAX) = 'Sales Value with Innovation' DECLARE @Country nvarchar(MAX) = 'UK'
I want to grab the resultant pivoted table back into excel. how to do it?
USE [Database_ABC]
GO
DECLARE @KPI nvarchar(MAX) = 'Sales Value with Innovation'
DECLARE @Country nvarchar(MAX) = 'UK'
SELECT [sCHAR],[sCOUNTRY],[Category],[Manufacturer],[Brand],[Description],[1],[2],
[3],[4],[5],[6],[7],[8],[9],[10],[11],[12],[13],[14],[15],[16],[17],[18],[19],[20],
[Code] ....
Hello,
I have a survey (30 questions) application in a SQL server db. The application uses several relational tables. The results are arranged so that each answer is on a seperate row:
user1 answer1user1 answer2user1 answer3user2 answer1user2 answer2user2 answer3
For statistical analysis I need to transfer the results to an Excel spreadsheet (for later use in SPSS). In the spreadsheet I need the results to appear so that each user will be on a single row with all of that user's answers on that single row (A column for each answer):
user1 answer1 answer2 answer3user2 answer1 answer2 answer3
How can this be done? How can all answers of a user appear on a single row
Thanx,Danny.
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
I need out put in single row for below 2 queries using joins
SELECT [total_physical_memory_kb] / 1024 AS [Total_Physical_Memory_In_MB],
CPU_Count AS NumberofCPU
FROM [master].[sys].[dm_os_sys_memory]
CROSS JOIN sys.dm_os_sys_info
[code]....
Hello All,
I am rather new to reporting on SQL Server 2005 so please be patient with me.
I need to create a report that will generate system information for a server, the issue im having is that the table I am having to gather the information from seems to only allow me to pull off data from only one row.
For example,. Each row contains a different system part (I.e. RAM) this would be represented by an identifier (1), but I to list each system part as a column in a report
The table (System Info) looks like:-
ID | System part |
1 | RAM
2 | Disk Drive
10| CPU
11| CD ROM |
Which
So basically I need it to look like this.
Name | IP | RAM | Disk Drive|
----------------------------------------------
A | 127.0.0.1 | 512MB | Floppy
So Far my SQL code looks like this for 1 item
SELECT SYSTEM PART
FROM System Info
WHERE System.ID = 1
How would I go about displaying the other system parts as columns with info
Any help is much appreciated!
We have a table with 500+ columns. The data is non-normalized, i.e. there are four groups of fields for for "people", followed by data that applies to all people in the row (a "household").For ad-hoc queries, and because I wanted to index columns within each person (person 1's age, person 2's age, etc.), I used UNION:
SELECT P1Firstname AS FirstName, P1LastName as LastName, P1birthday AS birthday, HouseholdIncome, HouseholdNumber of Children, <other "household" columns>
UNION
SELECT P2Firstname AS FirstName, P2LastName as LastName, P2birthday AS birthday, HouseholdIncome, HouseholdNumber of Children, <other "household" columns>
I could get at least the P1... P2... P3... columns with PIVOT, but then I believe I'd have to JOIN back to the row anyway for the "household" columns. Performance of UNION good, but another person here chose to use PIVOT instead.I can' find any articles on PIVOT vs. UNION for "de-flattening".
I create a report base on categories and sales of goods. Now I have Daily Info about all Products.
But I Need to present this report base on weekly periods. in pivotal format.
I family with pivotal format but change between daily report and weekly report is ambiguous for me.
Running SQL Server 2005, trying to develop an SSRS report to basically pivot a table of data with multiple columns.
Here's the basic source table:
Day Cases Referrals Vends
1 291 0 0
2 293 1 0
3 293 1 1
And I want to display it as:
Day 1 2 3
Cases 291 293 293
Referrals 0 1 1
Vends 0 0 1
I thought I could use a matrix for this but I can't seem to get it worked out. Is this even possible?
The Day number is meant to represent the day of the month and the user would input a start and ending date parameter.
I have a stored procedure that I use to return Purchase Orders from our PO system. It returns the data rows for PO's that match the criteria passed in (including the page to show etc.) + it returns two output params, Number of rows and Number of Pages.
Using query analyzer I can confirm the query works exactly as we want. I cannot however seem to get the data out to our ASP.net app.
Here is a function that I use in one of my classes:
<code>
Function fnListPOsByCoordinatorIDPaged(ByVal strCoordinatorID As String, ByVal intPOStatusID As Int16, _
ByVal intUserTypeID As Int16, ByVal intArchived As Int16, _ByVal intPageNum As Int32, ByVal intPerPage As Int32, _ByVal strConn As String) As SqlClient.SqlDataReader
Dim dr As SqlClient.SqlDataReader
SqlConnection1.ConnectionString = strConn
prListPOByCoordinatorPaged.Parameters("@CoordinatorID").Value = strCoordinatorIDprListPOByCoordinatorPaged.Parameters("@POStatusID").Value = intPOStatusIDprListPOByCoordinatorPaged.Parameters("@UserTypeID").Value = intUserTypeIDprListPOByCoordinatorPaged.Parameters("@Archived").Value = intArchivedprListPOByCoordinatorPaged.Parameters("@PageNum").Value = intPageNumprListPOByCoordinatorPaged.Parameters("@PerPage").Value = intPerPage
SqlConnection1.Open()dr = prListPOByCoordinatorPaged.ExecuteReader(CommandBehavior.CloseConnection)
Me.Pages = prListPOByCoordinatorPaged.Parameters("@Pages").ValueMe.Rows = prListPOByCoordinatorPaged.Parameters("@Rows").Value
If Me.Rows / intPerPage > Me.Pages Then Me.Pages = Me.Pages + 1End If
Return dr
prListPOByCoordinatorPaged.Dispose()SqlConnection1.Close()SqlConnection1.Dispose()
End Function
</code>
It does not crash, it returns my data reader with the correct records. Unfortunately my property values are returned as 0. They should have values.
Anyone know how to do this?
Thanks.
create table #t1 (id int)
create table #t2 (id int)
insert into #t1 values (1)
insert into #t1 values (2)
insert into #t1 values (3)
insert into #t2 values (1)
insert into #t2 values (2)
Run the below quires, you will get 2 different outputs.Second is the desired output. I cant find reason for query1
-- Query1
select * from #t1 a left join #t2 b on a.id = b.id and b.id is null
-- Query1
select * from #t1 a left join #t2 b on a.id = b.id where b.id is null
I've a variable in my SP that I'd like to use to change the format of my output. Try this!
select case when 1=2 then cast(1 as decimal(10,2)) else cast(2 as decimal(10,0)) end
Then this:
select case when 1=1 then cast(1 as decimal(10,2)) else cast(2 as decimal(10,0)) end
Why in either case, the output is returned as n.nn ? Whilst single select expressions (like these):
select cast(1 as decimal(10,2)) -- = 1.00
select cast(2 as decimal(10,0)) -- = 2
Work fine.
I want print state of running query to output, because my query need long time to run.But print statement dos not work correctly!
Note: I cannot use "go" in my query!
/* My query */
print 'Fetch Data From Table1 is Running...'
insert into @T1
select x,y,z
from Table1
print 'Fetch Data From Table1 Done.'
[code]...
Is there a way to build a select statement that will output related rows with different column data per row? I want to return something like:
rowtype| ID | value
A | 123 | alpha
B | 123 | beta
C | 123 | delta
A | 124 | some val
B | 124 | some val 2
C | 124 | some val 3
etc...
where for each ID, I have 3 rows that are associated with it and with different corresponding values.
I'm thinking that I will have to build a temp table/cursor that will get all the ID data and then loop through it to insert each rowtype data into another temp table.
i.e. each ID iteration will do something like:
insert into #someTempTable (rowtype, ID, value) values ('A', 123, 'alpha')
insert into #someTempTable (rowtype, ID, value) values ('B', 123, 'beta')
insert into #someTempTable (rowtype, ID, value) values ('C', 123, 'delta')
etc..
After my loop, I will just do a select * from #someTempTable
Is there a better, more elegant way instead of using two temp tables? I am using MSSQL 2005
I have a need to insert stored procedure output a table and in addition to that add a datetimestamp column.. For example, Below is the process to get sp_who output into Table_Test table. But I want to add one additional column in Table_test table with datetimestamp when the procedure was executed.
insert into Table_Test execute sp_who
IF Object_id('GoldenSecurity') IS NOT NULL DROP TABLE dbo.GoldenSecurity;
IF Object_id('GoldenSecurityRowVersion') IS NOT NULL DROP TABLE dbo.GoldenSecurityRowVersion;
CREATE TABLE dbo.GoldenSecurity (securityID INT, CompanyId INT, Securityname VARCHAR(50), issuedate SMALLDATETIME, currencyID INT)
[Code] ......
I want print state of running query to output, because my query need long time to run. But print statement dos not work correctly!!
Note: I cannot use "go" in my query!
/* My Query */
print 'Fetch Data From Table1 is Running...'
insert into @T1
select x,y,z
from Table1
print 'Fetch Data From Table1 Done.'
[Code] .....
Hi,
I have the following data in a table called "Products" :
Product Qty LHinging RHinging
-------- ----- -------- --------
Panel_1 1 R
Panel_1 1 L
Panel_1 1 R
Panel_1 1 R
Panel_2 1
Panel_2 1 L
I need to group this data like this :
Product Qty LHinging RHinging
-------- ----- -------- --------
Panel_1 3 L R
Panel_2 1
Panel_2 1 L
How can I do that ???
Thanks !