SQL Server 2014 :: Move Data / Findings Into A Perm Table?
Oct 18, 2014
I would like to move the data / findings into a perm table?The reason for this is so clients can connect to the table using excel. I have another stored procedure which is setup in this process already and it works well. I basically have the stored procedure setup on a task to run early in the morning so when clients get up they connect and get their data.
USE [MMAUDIT]
GO
CREATE PROCEDURE [dbo].[MMA_AUDIT_QUESTIONS_SUMM_STG] AS
BEGIN
[code]....
View 4 Replies
ADVERTISEMENT
Oct 15, 2015
I need to modify a table to reside on a new filegroup and also point TEXTIMAGE_ON to that filegroup instead of PRIMARY. Apparently in the past, the only way to achieve this via SQL is to create a new table, copy over data, drop the old table and rename the new table to the original name. I found this solution in the SQL Server 2005 forum.
Is there any other way to alter this table in order to point the TEXTIMAGE_ON to new filegroup using SQL Server 2014? We are on Standard edition. The technique I am using is the drop constraint (with move option) and add constraint (to new filegroup) commands. The data and indexes move, but not the text data (it still is in primary filegroup).
View 0 Replies
View Related
Oct 9, 2013
I'm trying to move specific data from three linked tables on a source database to three tables on a destination database by generating dynamic SQL INSERT scripts but am getting stuck on the last set of INSERT statements. I don't think I can use SSIS because the source autonumber fields may already exist on the destination side but I could be wrong.
For simplicity, Table 1 (T1) has one autonumber key of PK1 as well as other fields (A1, B1, etc.).
Table 2 (T2) has one autonumber key of PK2 and a foreign key (FK1) that links back to PK1 as well as other fields (A2, B2, etc.).
Table 3 (T3) has one autonumber key of PK3 and a foreign key (FK2) that links back to PK2 as well as other fields (A3, B3, etc.).
Like this:
T1: PK1, A1, B1, etc.
T2: PK2, FK1, A2, B2, etc.
T3: PK3, FK2, A3, B3, etc.
So, I'm able to query the source database T1 to generate my dynamic SQL INSERT statements that will be run on the destination side. I'm also able to generate my dynamic SQL statements to insert into T2 but when I get to T3 I currently am stuck figuring out how to insert because the destination side is unable to match it's FK2 to the just inserted PK2. It throws the below error.
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
View 3 Replies
View Related
Aug 4, 2015
Background information: SQL 2014 Ent. highly volatile OLTP environment. We generate 10 - 12 GB compressed transaction log backup files every 15 minutes.
Currently - we have two-node A/P cluster residing on flash array. Need to leverage AlwaysOn to offload processing. Replica server with have Flash storage. Replica node has same CPU and memory footprint. 10GB connection between nodes. Anyone generating such large transaction log for 15/30 minute time period?
View 0 Replies
View Related
Jul 29, 2014
I have a table attendance_details in both database DB1 and DB2, i need to move 01/7/14 and 02/7/14 records from db1 to db2, My table contains
employee_no INT,
date_of_attendance datetime,
present varchar(20),
shift_type VARCHAR(20),
marked_by VARCHAR(50)
View 4 Replies
View Related
Jun 27, 2015
I would like to move my AG databases to new location using C#.I found article on MSDN which uses SQLCmd utility to do that, but I cant run that utility from my application.I am looking for general steps OR T-SQL if possible so that I can follow the same from my C# application.
View 6 Replies
View Related
Jul 29, 2014
I need to load the following data into a SQL table. This is how the vendor is able to provide it to us.
CRCorp Daily Report,,,,,,
,,,,,,
Facility,Location,Purchase Order #,Vendor,Inventory #,Date Ordered,Extended Cost
09-Mowtown 495 CRST,09-402A Women's Imaging,327937,"BARD PERIPHERAL VASCULAR, INC.",113989,7/25/2014,650
09-Mowtown 495 CRST,09-402A Women's Imaging,327936,"WB MASON CO., INC.",112664,7/25/2014,8.64
01-Mowtown 499 CRST,01-302B Oncology,327947,McKesson General Medical,n/a,7/25/2014,129.02
[Code] ....
I have attempted to bulk insert it into this table with no luck.
CREATE TABLE POMaster
(Facility VARCHAR(75),
Location VARCHAR(75),
PONum INT,
VendorNm INT,
INVENTORYNUM VARCHAR(25),
orderDte DATE,
ExtendedPrice NUMERIC(10,2)
)
GO
It does not like the double quotes. How to make this format work? Do I need a format file?
View 2 Replies
View Related
Aug 13, 2014
Recently, I partitioned one of my largest tables into multiple monthly field groups. For the current month, it is attached to my "Active' table. The older records are kept in the "historical" table. I need an efficient way to pull records when have a date range that can be spread across both tables.
View 9 Replies
View Related
Jun 8, 2015
I'm having problems with the following code:
--DROP MASTER KEY
--GO
USE master;
CREATE MASTER KEY
ENCRYPTION BY PASSWORD = 'Pass@word1';
GO
USE master;
[code]....
What am I missing? What do I have to do if I get in a situation where I need to back out and start over?
[URL]
View 9 Replies
View Related
Aug 11, 2014
I am trying to replicate data from a view in the publisher to a table in the subscriber (transaction replication). I do not need the view's base table, or the view itself, replicated to the subscriber. I only want to data from the view to feed a table in the subscriber.
Is this possible?
Running SQL Server 2008 R2 Enterprise.
View 1 Replies
View Related
Aug 1, 2015
DECLARE @Table TABLE
(minv_code INT,
alert_msg varchar(10),
alert_time Datetime)
[Code]....
i want to select the data priority wise
the o/p should look like below
first row - 873939, 'Meter', '7/24/2015 3:31:22'
second row - 873939, 'Tamper', '7/24/2015 3:30:00'
third row - 873939, 'Reverse', '7/24/2015 3:31:18'
fourth row -873940, 'Tamper', '7/24/2015 3:31:22'
fifth row - 873940, 'Reverse', '7/24/2015 3:30:00'
View 1 Replies
View Related
Oct 29, 2013
I have a excel sheet with some data and blank columns. I have a ssis package using to import data from excel to sql table. For blank excel columns it is importing as null instead i want to show them as '0'. If data comes in it should update the data.
View 8 Replies
View Related
May 27, 2014
I need a script that inserts the data of an excel sheet into a table. If something already exists it should leave it, unless it's edited in the excel sheet and so on and so on. This proces has to go through a stored procedure... ...But how?
View 6 Replies
View Related
Dec 14, 2007
hi all,
is there any query to move certain data from a sql data to access table through query. i am having a requirement where i have to fetch the records from a sql table that falls within a specified range to a ms access table. is this possible through a query.
thanks
View 5 Replies
View Related
Aug 26, 2013
I try to load data into a memOpt table (INSERT INTO ... SELECT ... FROM ...). The source table has a size about 1 Gb and 13 Mio Rows. During this load the LDF File grows to size of 350 GB (until the space if the disk is run out of space). The Server has about 110 GB Memory for the SQL Server reserved. The tempdB doesn't grow. The Bucket Size in the create statement has a size of 262144. The Hash key as 4 fields`(2 fields have the datatype int,1 has smallint, 1 has varchar(200). ) The disk for the datafiles has still space for the datafiles (incl. the hekaton files).
How can I reduce the size of the ldf files during the load of the data ?
View 9 Replies
View Related
Aug 5, 2015
I have one excel sheet contains 50 sub sheets with different names on it. Is it possible can i load all sheets into SQL using SSIS?
View 2 Replies
View Related
Apr 2, 2008
I don't know what to do here please help! I have 2 tables here and I want to move selected data in one table to another but im not sure how to do it.
Thanks in advance =)
View 4 Replies
View Related
Sep 12, 2004
Okay, after I got everything imported, I found that a few thousand columns had "Shifted" on me. So now I am trying to "Shift them over" to where they need to be.
I did this:
INSERT INTO dbo.TABLENAME (COLUMN_NAME_TO_BE POPULATED)
SELECT COLUM_NAME_OF_INFO_TO_BE_MOVED
FROM dbo.TABLENAME
WHERE MFG = 'MANUFACTURER_NAME' AND PN LIKE '8888888888'
GO
I populated the PN column with 8888888888 to use as a reference point, and the MFG column already was populated with the correct name, so I was using those as my unique reference points.
Other columns that have the same MFG name are correct, so I have to use two unique identifiers to specify the actual data that needs to be moved.
It inserted 'NULL' in the whole table after I ran it in the Query Analyzer. It appeared to disregard the WHERE statement all together
Any ideas on what I am doing wrong here?
Is there a way to move the data from one column to the next one over by specifying other WHERE criterias?
View 1 Replies
View Related
Dec 10, 2013
We need to move duplicate data from this sheet to other table also having issue that sometime verifiedmemberID is null as well as verifiermember name is null and also having the values in BCP authorisationcode as well as FPoveridecode but transactionmode/bcpmode is 'n' and also having condition that transactionmode/bcpmode is 'y' but bcpauthorisationcode is blank.
MemberStatecodeMemberDistrictCodeURNCompanyCodeHeadMemberIDHeadMemberNamePatientID
PatientNamePatientGenderPatientAgeTerminalIDHospitalCodeRegistrationNoBlockingUserDateUnblocking
InvoiceNoDischargeInvoiceNoDischargeDescDischargeUserDateAmoutClaimedTransactionMode/BCPMode
UnspecifiedAuthCodeUnspecifiedAuthDateBCPAuthorizationCodeBCPAuthorizationDateFPOverideCode
[code]....
View 2 Replies
View Related
Jul 23, 2005
I have a production application that I am building some upgrades usinga second (empty) copy the database. A few of the upgrades includedchanging the datatypes of a few fields from varchar to int(all thevalues in this column are already numbers)I am not trying to move the data from the production database into theblank database using DTS and the fields that had their datatypeschanged are getting dropped by dts.Is there anyway to move this data easily through dts or through anothermethod and not have the fields with the datatype changes get dropped?I have about 60 tables so it is not as simple as just copying andpasting the data..
View 2 Replies
View Related
Mar 14, 2008
I have two tables say A and Archive. After a certain period of time some records are to be sent to archive table.To copy records to archive table I am using SqlBulkCopy operations.Now I have to delete the records from A Table. I was thinking of sending a Comma seperated id's of rows that are to be deleted to a stored procedure.Are there any better techniques to move data to archive table and to remove data from main table.?Thanks.
View 9 Replies
View Related
Apr 6, 2008
Hey all,
Another varbinary question.
I am trying to move an image stored in a table varbinary(max) directly from one table to another programmatically.
The rest of the data is just nvarchar(50) so I just use a T-SQL select statement in the code behind and feed all of the date into an SqlDataReader, I do this becuse there is some user interaction when the data is moved, so there may be some new values updated when transfering from one table to another, so once the old and possibly new data is stored in seperate variables then I use a T-SQL insert statement to move all of the data into the other table.
Problem is I am not really sure how to handle the image data(varbinary(max)) to just do a straight up transfer from the one table to another. I get conversion errors when trying to handle the data as a string which makes sense.
Not sure what to put for code examples since I really am stumped with this, but here is what is not working.
Dim imageX As String
SqlDataReader Code - imageX = reader("imageData")
Insert code - myCommand.Parameters.AddWithValue("@imageData", imageX)
Thanks in advance,
View 6 Replies
View Related
Aug 22, 2005
I have an application , user will read information in Excel file and insert that data into my application, I think it spend a lot of time. I want to make a tool which move data from Excel file to a table in My application (MS SQL) automaticly. How to do it, anybody has tool or know how to do, pls help me.thanks.
View 2 Replies
View Related
Oct 12, 2013
I have two tables. They both have an identity field to join them together. One of the tables has a column of data that I want to put in the other table. I need to make sure the data is brought over using the join so it updates that column for the right record.
I am struggling with this. Should I use a update or an insert? I'm leaning toward update but I can't figure out how with the join.
This is what I have tried so far:
Update grpcon.GroupID = groups.GroupID
from grpcon Inner Join groups
on grpcon.GroupNum=groups.GroupNum
View 1 Replies
View Related
Mar 18, 2008
Hello All,
I do have one large table, say "emp" having 80 columns. now as the requirement changes, i have to partition the "emp" table to 8 tables.
I want all of my existing data ["emp" table data] to be there in my new tables . i don't want to delete the existing data from "emp" table.
Cal any one please help me out to resolve this issue.
Thanks
Prashant Hirani
View 5 Replies
View Related
Aug 5, 2015
There is a table in which the data is coming in a massive rate, what are the ways to move those data from that table to another DB in another server (kind of archiving).
View 5 Replies
View Related
May 8, 2015
I am using a WriteBack Partition to receive data from various inputs and appends any new data that I add to the WB partition.
I am able to read the data immediately in the WB partition through a Fact partition query. This is working at this point as desired.
Eventually I want to move the data from the WB partition into Fact Partition. How can I do this, manually and through automation.
View 5 Replies
View Related
Jan 28, 2008
Hi, I'm using sql 2005,
what i want to do is:
first, i want filter data from table A if IC_NO and passport_Number no is null
then after get the result, i want move the result into table B.
my table as below:Table A
NUMBER IC_NO PASSPORT_Number
======= ====== ===========
1. 123 A123
2.
3. 456 A456
your post really highly appreciated
thanks
View 1 Replies
View Related
Mar 21, 2008
Hi all,
I have worked mostly in oracle, and new to sql server. I am trying to move a very small table from oracle database to sql server database. I see a different methods I can do this, I guess DTS etc.
I tried import wizard in SSMS, I was not succesful in that.
Can any expert suggest me any possible ways of doing this the best way? Thank you very much!
View 5 Replies
View Related
Feb 23, 2007
Guys,
We are currently moving our environment. I was told that we need to copy all the stuff over. More specifically, we want to move everything except the data, as our data is dynamic and will fill up in a few days by itself.
What is the best way to move everything over from one server instance to another?
My current approach is the following:
1. Create the file groups we have on our current server on the new server
2. Script out all databases with stored procedures, functions, views, priviliges, indexes ...
3. Script out all the jobs
4. Script out all the dts packages (or rather save each in a file)
5. Load all scripts into the new sql server
6. Re-create user accounts (can these be scripted out also and then loaded?)
Am I missing something or is there a wiser alternative?
Thanks a lot
View 3 Replies
View Related
Jul 5, 2007
Hey,
To reduce the load on my current server I wish to move a table which is being updated frequently by a static feed to an independant server.
Is there any way of moving a table with all of it's dependancies (Stored procedures and other tables) to another server without manually finding them all.
I'm very new to this as you can tell so if you require specifics let me know :)
Jim
View 2 Replies
View Related
Nov 26, 2007
I have staged my tables in a database which is in the same server as the destination database and they are on sql server 2005.
Now I need to push the data from the staged table to destination.
Which is the best approach in ssis ?
1) using execute sql task to a call stored procedure to push the data to a different database using server.dbo.table name from the stored procedure.
or
2) using dataflows to call a stored procedure and map source and destination.
View 13 Replies
View Related
Oct 9, 2015
I would like to know that how can I move 70 plus tables that are on sql 7.0 to sql 2012 via SSIS.I know its a two step process but what is the best route and how I can process.
View 0 Replies
View Related
