I tried to install SQL Server 2008 Native Client and I am not able to run the SQL script using command Line. I am getting an error "SQL type is not recognized..." So My questions is here.. is there any special package is there to run Command Line Utility without installing any SQL Client?
View 3 Repliestrying to run ssms.msi failed with code 29506....then i am trying to use command line but i do not know how to do this.
View 4 Replies View RelatedI want to import a huge .csv file in my sql server database.
There are about 10000 rows and 30 columns
My file looks like this:
Attributname1; Attributname2; Attributname3; ...
data; data; data;...
data; data; data;...
data; data; data;...
Now my idea is to do this on the command line/batch script. I have found different ways to do this job but the problem is i have to create a table in the database first. The entries in the first line of the csv file are the attribute names.
After creating the table with attributes i must write the data in the database.
Hello,I would like to know whether it is possible to execute DTS(Data Transformation Services) packages created from withinthe EM (Enterprise Manager) user interface, from the commandline. That is, is it possible to execute a command at the DOSprompt which will execute, and optionally also reconfigure,the DTS package? This would allow invoking DTS packagesfrom within scripts.Thank you for your replies,Neil
View 2 Replies View RelatedI can't find a command line where to write the queries for SQL Server express.
Can someoane give me a link with some documentation?
Thank you.
Hello All...
I am new to this forum (and new to SQL for that matter), so I hope this isn't a stupid question. I tried searching for the answer but couldn't find it here.
I am trying to start & stop SQL server through the command line so I can start & stop it as a scheduled task. Are there any switches for sqlmangr.exe I can use? Maybe another way?
Thanks....Dave S. <majordis@weco-group.com>
As a Sys Admin, I was wondering - if I have admin rights to a Win2k machinethat is hosting SQL Server 2000, do I have the ability using anycommand-line tools such as OSQL or ISQL to add, delete, or change accountsregistered in SQL Server for the various databases if I don't have access toa specific account within SQL Server?I ask, because the question that came up was - what if we have a DBA leaveunder less than amicable circumstances? Could I, someone who has adminrights on the machine, be able to log into that machine remotely and somehowvia command line (I don't maintain active SQL clients centrally), change theSA password, remove an account, and/or add an account with sysadmin rights,etc?Thanks in advance for any help -
View 3 Replies View RelatedHello,
Can anyone tell me how to install SQL Server 2005 from command line, so that sqlservr.exe would log on as "Local System" and not as "Network Service"?
Regards.
I am running a SSIS package through a SQL 2005 job. The package has encrypted data used to access a FTP account. I changed the package's security protection level to "EncryptSensitiveWithPassword." I also added a password to the package. I then tried to add the password to the jobs command line, and it still failed. Does anyone have a suggestion? I think I may have built the command line wrong. Can I get an example?
Thanks
Hi,
I need to implement command line interface to SQL Server 2000 ...
I have no idea from where to begin... What programming environment? What language? From where and how to connect to db? I'll be glad to accept any ideas.
Thank you
How do I execute below scripts using CMD:
Please Note: SQL server 2008r2, default instance with window Authentication.
1. Select * from Adventurewoks2008.Person.Person where Id = 5
2. Exec usp_getemployee (with parameter Manager_id = 100)
3. I have a folder named 'MyFolder' which contains 3 store procedures (usp_A, usp_B and usp_C).
How do I execute all 3 using CMD against AdventureWorks database.
Hi
I need to Install the SQL server 2008 express with Instance name and Sa password parameter in silent mode . I tried couple of command line arguments for this. but It didn't work, I got the setup failure error message
"The setting 'QB' specified is not recognized.Error code 0x84B40003."
Can any one help me with this?
These are the commands I tried.
1) sqlexpr.exe /qb instancename="MACHINENAMESQLEXPRESS2008" SCCCHECKLEVEL=IncompatibleComponents:1;MDAC25Version:0 ERRORREPORTING=1 SQLAUTOSTART=1 SAPWD="PWD" SECURITYMODE=SQL DISABLENETWORKPROTOCOLS=0"
2)SQLexpr.exe /qb /ACTION=Install /FEATURES=SQL /instancename="MACHINENAMESQLEXPRESS2008" SAPWD="PWD" SECURITYMODE=SQL
Thanks in advance.
Regards,
Nav.
What is the correct command line parameters to SQLEXPR32.exe that will default the Log On As: properties for the instance to use the Built-in account of Local System & Local Service?
I need it to be set to Local System immediately on install without having to go into the configuration manager. When I run the SQLEXPR32.exe right now I get the Network Service defaulted.
Thanks for any help,
Greg
greg@ram-software.com
Hi
Microsoft confirmed that the error message "The command line parameters are invalid" issue mentioned above is a bug and has been resolved in the next "drop" of SQL Server 2005.
has this error been fixed by microsoft. Cos i still get this error!!!!!!!!!
I am also trying to run the package from command line and when i click on execute the package it runs half way and hangs. What could be the problem????.
But when i run it from my Studio and stored package it works fine!!!
Thanks,
Jas
My client will be receiving a .dbf file which needs to be uploadedinto a sql server database table (as an append) every week. They areNOT computer savvy and I would like to automate this process ratherthan go into enterprise manager and run data transformation.Is there any way to write a batch file or a set of command lines whichwill do this?Thanks.Monica
View 3 Replies View RelatedOur application installation setup needs to be able to detect:
Is SQL Server 2005 Express Installed?
If false, run the SP2 Installation
Is SQL Server 2005 Express or SQL Express SP1 Installed?
If false, run the SP2 Installation with Update Switch
Is SQL Server 2005 (not Express) Installed
If true, abort installation with a mesage.
Can you direct me to some documentation about testing for these environments or just if someone has some scripts that will run in InstallShield, that would be great.
ALSO, can you direct me to information about using the command line update switch for the Express SP2 Installer?
Thanks.
Pat
Is here any way to update Mobile database from command-line program that ie;
reads sql commands from text file, run query analyzer, insert readed data to SQL tab and deploy these commands?
Or any other way to do this?
Hi,
I'm trying to install SQL Express 2005 with Reporting Services using Install Shield 11.5. The command line parameters which i am using is:
/qn ADDLOCAL=SQL_Engine,SQL_Data_Files,RS_Server,RS_Web_Interface,Client_Components SECURITYMODE=SQL SAPWD=<password> DISABLENETWORKPROTOCOLS=0 RSCONFIGURATION=Default RSSQLLOCAL=1 AUTOSTART=1
It installs the SQL Server and Reporting Services. It configures (creates Virtual Directories for report server and database) but it is not initializing the Report Server.
Having done the installation when i check the Report Server Status it was running and everything seems to be OK except it wasn't initialized.
Any idea??
Thanks,
Moby.
Hello, I'm currently trying to install SQL SERVER 2005 Express through the command line and I'm having problems.
The command I'm currently giving is:
SQLEXPR32.EXE /qb INSTANCENAME=MSSQLSERVER ADDLOCAL=ALL SQLACCOUNT=name SQLPASSWORD=password AGTACCOUNT= name AGTPASSWORD=password SQLBROWSERACCOUNT=name SQLBROWSERPASSWORD=password
Everything goes on fine until the SQL Server Database Sersvices configuring and a pop-up says the following:
SQL Server Setup could not validate the service accounts. Either the service accounts have not been
provided for all of the services being installed, or the specified username or password is incorrect. For
each service, specify a valid username, password, and domain, or specify a built-in system account.
I have no idea how to come over this.
Any help would be appreciated.
PS I don't know what AGTACCOUNT or AGTPASSWORD is, so maybe the error might be there. If not, anybody willing to explain to me what it is, it would be GREATLY appreciated.
SQL Server Compact 3.5 - I've a sdf file created in a .NET windows desktop command line program. How to now consume the data in MS Excel?
I can see that under
C:Program FilesMicrosoft SQL Server Compact Editionv3.5
I've one DLL called
sqlceoledb35.dll
But I don't have any oledb driver listed when creating an UDL file?
How can I consume the data in other apps that are not .NET and developed in house them?
Thanks, AM.
I am using installshield to distribute SQL Server 2005 Express. I have the SQLEXPR.EXE file and I want to run it in /qb mode so the user can see the pretty dialogs pop up but not have to click anything.
View 6 Replies View RelatedI have the following SQL which i want to convert to a stored procedure having dynamic SQL to generate column numbers (1 to 52) for Sale_Week. Also, I want to call this stored procedure from Excel using VBA, passing 2 parameters to stored procedure in SQL Server
e.g,
DECLARE @KPI nvarchar(MAX) = 'Sales Value with Innovation' DECLARE @Country nvarchar(MAX) = 'UK'
I want to grab the resultant pivoted table back into excel. how to do it?
USE [Database_ABC]
GO
DECLARE @KPI nvarchar(MAX) = 'Sales Value with Innovation'
DECLARE @Country nvarchar(MAX) = 'UK'
SELECT [sCHAR],[sCOUNTRY],[Category],[Manufacturer],[Brand],[Description],[1],[2],
[3],[4],[5],[6],[7],[8],[9],[10],[11],[12],[13],[14],[15],[16],[17],[18],[19],[20],
[Code] ....
Some T-SQL commands can fail with multiple errors. For example, if you try to disable a primary key constraint using ALTER TABLE t1 NOCHECK CONSTRAINT PK, you will get messages like:
Msg 11415, Level 16, State 1, Line 341
Object 'PK' cannot be disabled or enabled. This action applies only to foreign key and check constraints.
Msg 4916, Level 16, State 0, Line 341
Could not enable or disable the constraint. See previous errors.
However, in the code below, only the last message is printed. How can I print all the error messages?
USE tempdb;
CREATE TABLE #t1(c1 INT CONSTRAINT PK PRIMARY KEY);
BEGIN TRY
ALTER TABLE #t1 NOCHECK CONSTRAINT PK;
PRINT 'Primary key disabled'
END TRY
BEGIN CATCH
PRINT ERROR_MESSAGE();
END CATCH
Any command through that can I delete/disable the DWORD value "Pendingfilerename operations" so that while I start the SQL Install work, it does not fail due to this and can write this as one of the precheck options.
View 0 Replies View RelatedUsing Query Analyzer, I can right click on an object and select "scriptobject to new window as create" and I get the text of the object'sdefinition (schema). Can I get same result from command line, i.e., fromosql, I can get text output for the definition of the object (something likedefncopy under Sybase)? If so, what is the command or store procedure name?Thanks in advance.
View 2 Replies View RelatedIs there any command line that I can use to do select from databases (SQL 2005)
View 4 Replies View Relatedhi I would appreciate if someone demonstrate how to automate ftp in a command line from within a batch file. I do want to move certain files from one server to another via ftp command line in an automatic fashion via running the batch periodically.
thanks
Ali
hi: I can't seem to run BCP thru the command line.
bcp pubs..authors out c:authors.txt -c -Usa -P
error:
Msg 170, Level 15, State 1, Server Y47SA, Procedure , Line 1
[Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near'.'.
I've been trying to run BCP thru command line all day. I tried OSQL, ISQL. I find this utility very
frustrating. btw - I have installed SP2.
any thoughts would be much appreciated.
TIA
deanna
Anyone know where I can find some command line tools such as RCMD etc.. Thank you.;)
View 1 Replies View RelatedI'm trying to insert into a table 2 values one of which is an
exec master..xp_cmdshell @command where I have assigned @command with a value
this statement gives me the result into a 1 col. table fine:
insert into mytable99(col1) exec master..xp_cmdshell @command
now what I want to do is put col2 in there as well!!
ie. insert into mytable99(col1,col2) values (exec master..xp_cmdshell @command, '123')
I get a sytax error ... on the exec ??
Could anyone help re the proper way of doing this ... thanks in advance
I use a similar command below to insert into a temp table the result of a large command line call to an exectable with many parameters passed in the command of which the result passed back contains many items. I then parse the response string to get my results...
set @command = 'dir'
insert into tsverisign(response) exec master..xp_cmdshell @command
My question is our can I insert two values at the same time to this same table one of which is my "exec master..xp_cmdshell @command"
similar to insert into tables (field_a, feild_b) values ('1','2')
Something like (and I know this does not work):
insert into tsverisign(response,trans_id)
values (exec master..xp_cmdshell @command, '123')
Any help would be greatly appreciated .... PS I'm new to MS SQL 2000 and proper syntax etc. etc. so I need full example so I can try. :rolleyes:
Hi All,
I was given a task of coming up with the script to recreate an existing database using a command line. I would use this script in case when the server is down and I can't get to Query Analyzer or EM to recreate it. I am not sure where to start. Any ideas are greatly appreciated.
Thanks.
What ius the synthax to backup an SQLServer DB from the command line ?
Thanks