SQL Server 7.0 System Stored Procedures
May 1, 2001
About a year ago we inherited a SQL server (7.0) from another division of our company. The time has come to migrate the SQL Server functionality onto a new machine. Before I do this though, I need to figure out what the initial installation configuration was so I can set up the new server with the same specs. I am looking for a system stored procedure(s) that can tell me the following:
Case sensitivity, accent sensitivity, SQL build (SP), character set, etc. Basically I need to know what checkboxes were ticked during the initial set up of the server.
Any help would be greatly appreciated. TIA.
View 2 Replies
ADVERTISEMENT
May 8, 2008
Hi all,
I would like to enable users that do not belong to groups (server roles) such as sysadmin, serveradmin and don't have db permissions such as ddl_admin or db_owner to run some of the system stored procedures (such as sp_addumpdevice sp_configure sp_serveroption ...) and DBCC commands (such as DBCC CHECKFILEGROUP - requires ob_owner or sysadmin permission).
Is it possible to change permissions of SQL Server system stored procedures?
Is it possible to change permissions of SQL Server DBCC commands?
Thanks,
Assaf
View 1 Replies
View Related
Nov 6, 2007
Using SQL 2005, SP2. All of a sudden, whenever I create any stored procedures in the master database, they get created as system stored procedures. Doesn't matter what I name them, and what they do.
For example, even this simple little guy:
CREATE PROCEDURE BOB
AS
PRINT 'BOB'
GO
Gets created as a system stored procedure.
Any ideas what would cause that and/or how to fix it?
Thanks,
Jason
View 16 Replies
View Related
May 13, 2008
Greetings:
I have MSSQL 2005. On earlier versions of MSSQL saving a stored procedure wasn't a confusing action. However, every time I try to save my completed stored procedure (parsed successfully ) I'm prompted to save it as a query on the hard drive.
How do I cause the 'Save' action to add the new stored procedure to my database's list of stored procedures?
Thanks!
View 5 Replies
View Related
Apr 7, 2006
We recently upgraded to SQL Server 2005. We had several stored procedures in the master database and, rather than completely rewriting a lot of code, we just recreated these stored procedures in the new master database.
For some reason, some of these stored procedures are getting stored as "System Stored Procedures" rather than just as "Stored Procedures". Queries to sys.Objects and sys.Procedures shows that these procs are being saved with the is_ms_shipped field set to 1, even though they obviously were not shipped with the product.
I can't update the sys.Objects or sys.Procedures views in 2005.
What effect will this flag (is_ms_shipped = 1) have on my stored procedures?
Can I move these out of "System Stored Procedures" and into "Stored Procedures"?
Thanks!
View 24 Replies
View Related
Nov 7, 2001
So every database i created has no system stored procedures. I didn't know how that could happen as I am not the person who installed sql2000. What should I do to get all the system stored procedures back?
TIA
View 1 Replies
View Related
Oct 31, 2002
I am trying to edit a system stored(sp_add_dtspackage) procedure and cannot for the life of me find where to edit. This procedure does a check to keep users from saving changes to a package they do not own. I need users to be able to change the the packages when they are not always the one who created.
View 2 Replies
View Related
Aug 28, 2002
I have a SQL Server installation that is missing the stored procedures used for mail (xp_startmail, xp_stopmail, etc.). Is there a way that I can put these on the server without having to reinstall SQL? I tried to generate them from other servers but SQL won't allow you to do this with these particular stored procedures.
View 1 Replies
View Related
Feb 25, 2005
When I create a new database, the system stored procedures are missing;
dt_addtosourcecontrol_u
dt_checkinobject_u
etc.
I'm logged in as sa.
View 5 Replies
View Related
Nov 8, 2007
I need to create a stored procedure in the master database (yes, I know it's not that good of an idea). I'm working with SQL 2K5, SP2 Whenever I create it, it is marked as a system stored procedure no matter what I name it, what schema I put it in, or what user I use to create it (sysadmin or minimal permissions).
As soon as I create it, if I do any of the following, I can see it to be a system stored procedure and not a regular user sp.
1) SELECT * FROM sys.objects where is_ms_shipped = 1
2) SELECT * FROM sys.procedures where is_ms_shipped = 1
3) Looking in SSMS... There is a special folder for system stored procedures in SSMS, and mine is in there.
At least in my case, the only thing it hurts is that you have to be a sysadmin to execute that stored procedure (and I need to have a non sysadmin be able to execute it). Other than that, it executes normally when run by a sysadmin.
Any suggestions on why this is happening? It's only happening on 1 out of about 80 SQL servers we have.
View 4 Replies
View Related
Oct 23, 2006
I tried this morning to check some of the system stored procedures and ran into trouble. Only four of them executed: sp_alterdiagram, sp_creatediagram, sp_dropdiagram and sp_helpdiagramdefinition. I could not check all the rest, I did it selectively. The typical error message was: Invalid object on RETURN statement. Some had syntactical errors.
sp_ActiveDirectory_Obj
Invalid object name 'sys.sp_ActiveDirectory_SCP' Line 171
sp_ActiveDirectory_SCP
Invalid object name 'sys.sp_ActiveDirectory_SCP' Line 171
sp_ActiveDirectory_Start
Invalid object name 'sys.sp_ActiveDirectory_Start' Line 19
Invalid object name 'sys.sp_add_agent_parameter' Line 60
Invalid object name 'sys.sp_add_agent_profile' Line 123
Invalid object name 'sys.sp_add_data_file_recover_suspect_db' Line 17
sp_addalias
Msg 102, Level 15, State 1, Procedure sp_addalias, Line 44
Incorrect syntax near '%'.
Msg 195, Level 15, State 10, Procedure sp_addalias, Line 64
'get_sid' is not a recognized built-in function name.
Msg 102, Level 15, State 1, Procedure sp_addalias, Line 78
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_addalias, Line 119
Incorrect syntax near '%'.
sp_bindefault
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 95
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 134
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 182
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 208
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 228
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 264
Incorrect syntax near '%'.
Msg 102, Level 15, State 1, Procedure sp_bindefault, Line 273
Incorrect syntax near '%'.
sp_databases
Invalid object name 'sys.sp_databases'. Line 6
sp_tables
Invalid object name 'sys.sp_tables'
Is there a chance that these errors are due to the fact that I executed them without parameters?
Thanks
View 2 Replies
View Related
May 15, 2007
I know there are a lot of undocumented system stored procedures such as xp_ntsec_enumdomains, xp_instance_regread etc, that exist on SQL Server.
Does anyone know of any good websites that contain descriptions of what these stored procedures do? In particular I know that a default installation of SQL Server 2000 leaves permission to execute many of these granted to public and I am interested in finding out what the implications of each one of these are? I have tried Googling this topic but there doesn't seem to me much or there (or what is there is in Chinese and I don't really want to click on to!)
Once again thanks for the help.
View 3 Replies
View Related
May 12, 2008
i found that some stored procedure get created automatically in sqlserver 2000 (system stored procedures) ,while doing my work i accidentally deleted those stored procedures can any body answer following questions1: why these stored procedures are there and automatically created2: what happen en if i deleted those stored procedures3: how to recreate those stored procedures with limited user permission thanks in advance
View 2 Replies
View Related
May 11, 2004
I recall that stored procedures created in the master database and having a name beginning with sp_ are available from all databases. However, I've found varying results when invoking such a procedure from a different database. For example:
DECLARE tables CURSOR FOR
select name from sysobjects
where type='U'
order by name
for read only
populates a cursor with the list of tables in the database from which you are running the procedure. However this query in the same stored procedure:
SELECT count(*)
FROM sysExcludeMaint
WHERE @tablename like tablename
fails with "Invalid object name 'sysExcludeMaint'." if the table sysExcludeMaint
doesn't exist in the master database (it does exist in the database from which I've invoked the proc). I'm not clear on why the different results. Anyone know?
View 2 Replies
View Related
Jul 21, 2006
A system stored procedure got accidentally deleted, and all backups aresince the stored procedure was deleted (wonderful!)Can the SQL for the stored procedure be extracted from another serverand loaded as opposed to removing everything and then rebuilding theserver?Thanks in advance!
View 1 Replies
View Related
Aug 23, 2006
Hello, I want to export/import a non system stored procedures from one DB to another. How Should I proceed ?
Thanks in advance.
View 1 Replies
View Related
Jun 8, 2004
how to implement the replication with the System Stored Procedures or the Transact-SQL ?
i want to encapsula my replication and make it be reusable and ease to use.So i want to do the replication in a script file.how can i do this?
Thanks.
View 9 Replies
View Related
Aug 2, 2006
What system stored procedures have changed between SQL 2000 and SQL 2005?
View 4 Replies
View Related
Jul 13, 2006
Hello,
We are trying to be proactive and stop a potential performance issue by reducing the number of recompiles in our SQL 2000 database application. This database is replicated. After viewing output from Profiler and PerfMon it seems that over 90% of the recompiles are due to system stored procedures generated by replication merge agents. Can anything be done about this?
Thanks
View 3 Replies
View Related
Sep 22, 2015
disable the following system stored procedure (xp_grantlogin and xp_revokelogin)?
View 5 Replies
View Related
Jul 23, 2005
I want to know the differences between SQL Server 2000 storedprocedures and oracle stored procedures? Do they have differentsyntax? The concept should be the same that the stored proceduresexecute in the database server with better performance?Please advise good references for Oracle stored procedures also.thanks!!
View 11 Replies
View Related
Sep 30, 2006
Hi,
This Might be a really simple thing, however we have just installed SQL server 2005 on a new server, and are having difficulties with the set up of the Store Procedures. Every time we try to modify an existing stored procedure it attempts to save it as an SQL file, unlike in 2000 where it saved it as part of the database itself.
Thank you in advance for any help on this matter
View 1 Replies
View Related
May 2, 2007
Hi all
as like there is a query in oracle as
select * from tab
we get all tables
Like wise is their any query in sql server 2005
b'coz
I want all system procedures
as like sp_password or sp_help
i want list of all procedures
for that i wrote query as
select * from sysobjects
but in output i don't find any name starting with sp_
Thanks in advance
Malathi Rao
View 20 Replies
View Related
Mar 16, 2008
hi, i see there are lots of system store procedures available but could you specify me the ones that are used in day to day work as a DBA??
View 6 Replies
View Related
Mar 24, 2004
IS there a way inside code for vb.net to programmatically change sorting in a stored procedure???Reason is I need a two way sort and did not want to have to write a SP for each way ....If so Do you have an example.....
View 3 Replies
View Related
Jan 4, 2000
Hi,
Everytime after I restore any database on the sql server 6.5, I have to recompile all the stored procedures in that database.Is there any method to overcome this problem?
Thanks,
Manu.
View 1 Replies
View Related
Apr 19, 1999
Trying to run a SQL Server 6.5 stored procedure via ADO 2.0 in Visual Basic 6. The stored procedure moves roughly 10000 records from one table to another within the same database. The procedure works just fine when run from a SQL editor such as I/SQL, but only transfers a few hundred records when it is executed from a VB application using ADO 2.0.
The guilty code can be seen below. Any thoughts?
Public cnSQL As New ADODB.Connection
Public qry As New ADODB.Command
With cnSQL
.ConnectionString = ConnectStringSQL
.ConnectionTimeout = 20
.Open
End With
Set qry.ActiveConnection = cnSQL
qry.CommandType = adCmdStoredProc
qry.CommandTimeout = 120
qry.CommandText = "sp_VGInsertBOMStructure"
qry.Execute
Peter
View 1 Replies
View Related
Jun 6, 2002
I have a stored procedure on SQL/Server 2000 that inserts into a #temptable. When I execute it from Query Analyzer it works fine.
When I execute it from an ASP using ADO it gives me an Open Error message. When I comment out the
#temptable the ASP works fine. Can someone shed some light on this? Do I have to do an ADO opent on the
#temptable?
View 4 Replies
View Related
Apr 11, 2006
Is there any application which can tell you the procedure called within a procedure.
View 2 Replies
View Related
May 16, 2008
I come from a MySQL background, and have recently began migrating to SQL Server.
I can't, for the life of me, find an example of a stored procedure that does the following in SQL Server:
- Multi-lined
- Contains both input and output parameters
- Sets one of the output parameters within the stored procedure
Can anyone provide some insight? I.e. Why does the following not work?
IF NOT EXISTS (SELECT * FROM syscomments WHERE id = object_id('usp_test'))
BEGIN
CREATE PROCEDURE "usp_test"
(@num1 INT, @num2 INT, @result INT OUTPUT)
AS
BEGIN
DECLARE newValue INT;
SET @newValue = num1 + num2;
SET @result = @newValue;
END;
END;
I get these errors (I'm using the Management Studio Express)
Msg 156, Level 15, State 1, Line 3
Incorrect syntax near the keyword 'PROCEDURE'.
Msg 155, Level 15, State 2, Line 7
'INT' is not a recognized CURSOR option.
Msg 137, Level 15, State 1, Line 8
Must declare the scalar variable "@newValue".
Msg 137, Level 15, State 2, Line 9
Must declare the scalar variable "@newValue".
View 8 Replies
View Related
May 21, 2015
I am trying to determine which are undocumented system procedures used to satisfy our company's security audit. Well, the nature of undocumented system procedures is it's undocumented. Hence, it's hard to find.
So, is there a way I can get a list of SQL Server documented system procedures?
View 10 Replies
View Related
Nov 19, 1998
hi, if exists (select * from sysobjects where id = object_id('dbo.MRDD_FINAL') and sysstat & 0xf = 3)
drop table dbo.MRDD_FINAL
This code was generated when I used the create a script to build a table from an existing table.
is there a way to check if a a table contains data or not,
The whole idea is to check if table A contains data, I need to truncate the table,otherwise I do nothing...
regards
Ali
View 4 Replies
View Related
