Morning all!
A quick question for you all, We will be changing the IP address of our SQL 7's server sometime next week. Does any1 know of any issues/problems that could occur if we do so?
Thanks in advance for any and all help
Gurmi
Hello ALL
what I want to achieve is to load a text file that has email addreses from disk and using the email addresses in the text file look it up against the email addresses in the database table then once matched delete all the users in the table whose email address were in the text file.
I also want to update some users using a different text file.
Please help me with the best way to do this
Thanks in advance
We have SQL Server 2000 Standard and recently moved from Exchange 5.5to Exchange 2003. This problem occurred both before and after thee-mail change.We would like to send notifications of failed jobs to multiple peoplein case one person happens not to be in on the day there is a problem.Setting up an operator with an e-mail name that combines twoaddresses seems to work ok as long as we use a format like thefollowing:smith_john; jones_maryorJoin Bytes!; Join Bytes!However, when we add a third name, we start getting problems. Thefirst and third accounts listed get the message but the second onedoes not -- apparently because the address gets corrupted. Forexample (based on the message received at one of the good addresses),a message sent to:Join Bytes!; Join Bytes!;Join Bytes!goes to Smith and Jackson successfully but Jones' address is corruptedto:Join Bytes!omand, of course, fails.From some other testing, it appears that the last three characters ofthe first address always get appended to the end of the secondaddress.Has anyone else run across this? If so, is there a known fix? I hadhoped Exchange 2003 would fix the problem. Most likely, we will trysetting up a personal distribution list under the account from whichthe messages are sent. I just wanted to give one more shot to findingthe problem -- both because I would like to know and because beingable to string together addresses is a little easier than having to gothrough the person who can give us access to the account to set thePDL.Thanks.Jonathan LevyChicago Department of Public Health
View 1 Replies View RelatedHello Guys,
I had been trying to solve this error with no success :
One or more of the server network addresses lacks a fully qualified domain name (FQDN). Specify the FQDN for each server, and click Start Mirroring again.
The syntax for a fully-qualified TCP address is:
TCP://<computer_name>.<domain_segment>[.<domain_segment>]:<port>
I had installed three instances on my local machine to test Data base mirroring :
Principal : running SQL Developer Instance
Mirror : running SQL Developer Instance .
Witness : Running SQL Express.
Database mirroring already enabled using startup flag : -T1400
i even tried to configure it with out a witness but still have the same error .
I used the follwoing server name in the mirroring wizard(not localhost) :
Principal : TCP://Ali-laptop:5022
Mirrored : TCP://Ali-laptop:5023
Witness : TCP://Ali-laptop:5044
whats the problem guys?!
Can the NT Server Name, SQL Server Name and IP Addresses be changed without reinstalling NT(4.0) and without reinstalling SQL Server (6.5). We have SQL Server on an NT Server and they both have the same name. If this can be done how would it impact the Registry. Would the appropriate settings in the Registry be updated? Thanks.
View 1 Replies View RelatedCan anyone help me with a problem I have with SSRS 2005? How do I configure SQL Server 2005 Reporting Services to deliver subscription e-mails to addresses external to my windows domain?
I've been having trouble configuring the Report Server e-mail delivery component to send subscription e-mails to addresses outside the domain on which the report server is hosted.
For e.g. since my local windows domain is named "smartsystems.com", I have found that the Report Manager does not have any problems sending subscription mails to "eawagu@smartsystems.com" but throws up an error whenever I include "eawagu@yahoo.com" in the recipients' list.
Any insights?
I'm trying to connect to a local instance of SQL Server using an IP address and its not working. When I looked up the connect string, it shows only the IP address replacing the Server name, not the instance name, i.e. Server=127.0.0.1 - how does it know which instance to use?
Can I use the 127.0.0.1 loopback address for the server (as its on a local machine)?
Do I have to use 'Network Library = DBMSSOCN' to tell the client to use TCP/IP?
(TCP/IP is showing as an enabled protocol in the Client Network Utility)
I need to allow for many addresses in my database for each client that is entered. I'm looking for suggestions on how I should handle this. I will need to do mailings to the clients and will need a way to select the address record that the client indicates as the mailing place.
Thanks for any thoughts.
I got got a pile of bad email addresses to update in our SQL database.I know how to do this for individual records using the update command.Is there a way to execute an update using the list of addresses in anexcel spreadsheet or some other form of list? This kind of scriptingis new territory for me.
View 5 Replies View RelatedI want to replicate between 2 servers not on the same network. One has to be addressed by IP. Currently replication does not support IPs - anyone have a workaround. Will this be resolved in the future? Seems this is a pretty common scenario if your db is on a hosted site.
-cg
I hope someone can help me with this problem.
I need to replicate some tables from our store servers
to our corporate server. All of them are 6.5, and
the corporate server will subscribe and the stores
will publish. I have registered
all of our stores on the corporate server so that I can
enable them for replication.
The problem is that to be able to register them I had to create
a system DSN for ODBC, but that would only work if I used the
IP addresses. Unfortunately, then when I try to enable them
on the corporate server I get an error stating that name (which
is the IP address) is not a valid object identifier.
In ODBC I did actually use a real name (not an IP) for the
name, a normal description, and the IP is in the Server
field. Is there some way to use an alias? What am I doing wrong?
Below is a raw data with SQL script to create the temp table. This table is a scale down version of what I am working with. I am taking the addresses from several different sources and putting them in a temp table. Now, I need to remove the duplicate addresses for each ID. Duplicate addresses are okay for different IDs.
Raw Data
IDAddr1 CityStateZip
26205 N Main STChicagoIL52147
26205 N Main STChicagoIL52147
2685 Park AveChicagoIL52147
3535 Main StAustinTX78715
35976 Ponco StDallasTX79757
359587 MopacAustinTX78715
4558741 Len LnDaytonFL74717
455518 Spring DrDaytonFL74717
45585 Park AveChicagoIL52147
Desired Result
IDAddr1 CityStateZip
26205 N Main STChicagoIL52147
2685 Park AveChicagoIL52147
3535 Main StAustinTX78715
35976 Ponco StDallasTX79757
359587 MopacAustinTX78715
4558741 Len LnDaytonFL74717
455518 Spring DrDaytonFL74717
45585 Park AveChicagoIL52147
CREATE TABLE #tmpTable(
[ID] Int,
[Addr1] [varchar](15) NULL,
[City] [varchar](9) NULL,
[State] [varchar](2) NULL,
[Code] .....
Is there a way to export a list of email addresses to outlook based on certain query conditions? So for example, lets say using pubs, I want to send out an email to a group of authors who have published only one book. So could I essentailly query for the authors and then have those corresponding authors emails sent to outlook so that I could send out a generic email asking them if they are going to write another book or something like that?
The Yak Village Idiot
Hello!
We will be moving our two cluster running SQL Server 2005 64-bit SP2 on Windows 2003 to the different datacenter. IP addressed of both nodes will be changed by DNS names remain the same. I was wondering if anyone had issues with this. Out thought is that we just need to update IPs in Cluster Manager.
Comments are welcome.
Igor
I have a report with a Matrix table. When it€™s fully populated I have 5 rows. These rows are different categories in a CRM system. In these categories there are a lot of Opportunities listed. The thing here is that category 1-4 exist in one table, really a view, and category 5 exist in another different view. So to gather all the information into one single Matrix table to later have subtotals and stuff I just made a little Union of the two select queries.
Now one the column in the table is of course Topic. And from here my client wants to be linked to the right CRM card. The problem I have encountered is that how can I have to different addresses on one single cell in the table?
In the Navigation pane in the cell that corresponds to the Topic, for now I have an address like this:
=string.Format("http://{0}/SFA/opps/edit.aspx?id={1}", Parameters!srv.Value, Fields!objectid.Value)
What I need to change when it€™s a category 5 Opportunity is €œopps€? to €œcat5€?and add €œ&etc=10008€? to the end of the address. Any ideas?
PS. {0} and {1} are parameters, one server parameter and one opportunity ID parameter.
Kind Regards
Hi,
Is there any way to ony allow remote access to an instance of SQL Server 2005 from a specific set of ip adresses? (and How To..)
My problem is i only want certain machines to access the server. Any other suggestions to achive this are most welcome.
Thanks for your time
Leroy
Hi all,
I'm having a bit of an issue with this query. I'm not that familiar with MS SQL so please forgive me.
I'm trying to select the bad email addresses in a table so I can remove them or correct them but I'm not getting any results that are helpfull. Bellow are some of the queries I've tried
select email from person where email != "*@*"
returned all addresses plus null fields.
select email from person where email not like "%@%" (this didn't work at all)
And a few other that are similar
Could somebody please kick me in the right direction.
TIA
Jason
I have a string like this one in my column
Mike@yahoo.com, Bill@aol.com, Dan@yahoo.com, Frank@gmail.com
In my result set I need to display all email addresses that do not have the @yahoo.com domain.
Greetings:
I read with great interest a post on getting hte top 75 per cent by month, but still get through this problem. I have a table containing addresses, city names and state names, Each row has a unique address. I want to get the first ten addresses for each city in each state. I've tried something like the following which didn't work. Suggestions on how to solve the (simple) problem would be appreciated.
Select top (10) city,state,address
from address_list
alan
SQL Server Configuraton Manager,
Protocols for sqlexpress,
TCP/IP
When I initially installed SQL Server 2005 Express, it automatically picked up all the IP addresses (60 of them) I had on the server, and filled them in under TCP/IP - IP adresses Tab.
I recently took those IPs off the server and replaced them with 30 new IP addresses. Is there a way to have SQL Server 2005 Express read the Network configuration on the server and take the old IPs off the TCP/IP - IP addresses tab and put the new one's there?
Thanks,
Bill
Hi All,
A client of mine has an update to the software they use which requires SQL ports to be pinholed on the
router to allow direct connctions from point of sale terminals. I'm not happy with the idea but thats not my call.
Is there a way to restrict IP addresses that can connect to SQL Express ? (without havng to get them to buy
a new router)
Cheers.
Irish
I have dumped html in a table and am looking to extract email addresses from it. Within the html, the email addresses are followed and preceded by blank spaces. I am playing around with the following code:
SELECT RIGHT(@email, LEN(@email) - CHARINDEX('@', @email)) as Domain
but have been unable to extract whole email addresses.
I have several 64 bit SQL 2005 servers that up to 4 named instances residing on them. Before going into production I need to change the port addressing to use fixed TCP ports. I have SQL Browser running to enbale me to see the named instances.
What steps are required to change to using specific TCP port addresses and is there a particular range to use ?
I have the following code on a form:
<asp:SqlDataSource ID="building_a" runat="server" ConnectionString="<%$ ConnectionStrings:vol1ConnectionString4 %>"
SelectCommand="SELECT [E_MAIL] FROM [Sheet4$] WHERE ([BUILDING] LIKE '%' + @BUILDING+ '%')" OnSelecting="building_a_Selecting">
<SelectParameters>
<asp:Parameter DefaultValue="a" Name="BUILDING" Type="String" />
</SelectParameters>
</asp:SqlDataSource>
<asp:SqlDataSource ID="building_b" runat="server" ConnectionString="<%$ ConnectionStrings:vol1ConnectionString4 %>"
SelectCommand="SELECT [E_MAIL] FROM [Sheet4$] WHERE ([BUILDING] LIKE '%' + @BUILDING+ '%')" OnSelecting="building_b_Selecting">
<SelectParameters>
<asp:Parameter DefaultValue="b" Name="BUILDING" Type="String" />
</SelectParameters></asp:SqlDataSource>
<asp:TextBox ID="subj" runat="server" Width="500px">Subject</asp:TextBox><br /><br />
<asp:TextBox ID="messg" runat="server" Rows="20" TextMode="MultiLine" Width="500px">Message</asp:TextBox><br /><br />
<asp:Button ID="bldga" runat="server" Text="Building A" OnClick="Button1_Click" /><br /><br /><asp:Button ID="bldgb" runat="server" Text="Building B" OnClick="Button2_Click" /><br /><br />
<asp:Label ID="resultLabel1" runat="server" ForeColor="red"></asp:Label>
And I have the following code behind:protected void Button1_Click(object sender, EventArgs e)
{SmtpClient smtpClient = new SmtpClient();
MailMessage message = new MailMessage();
try
{MailAddress fromAddress = new MailAddress("me@mydomain.com", "My Name");MailAddress toAddress = new MailAddress("them@theirdomain.com");
message.From = fromAddress;
message.To.Add(toAddress);
message.Subject = subj.Text;message.IsBodyHtml = false;
message.Body = messg.Text;smtpClient.Host = "myhost";
smtpClient.Send(message);resultLabel1.Text = "Email sent!";
}catch
{resultLabel1.Text = "Send failure";
}
}
The queries get e-mail addresses from a SQL database for all people who work in a particular building.
The buttons will send an email if I give a To address.
How do I write the code so that clicking on the "Building A" button will send the e-mail to the addresses from the query results individually?
Any ideas?
Hello ALL,
My source columns are:
Customer Record DESTINATION TABLE
Name Address_line_1
sex city
PID state
legal_street zip_code
legal_state ID
legal_city
mail_street
mail_city
mail_state
mail_zip
My client needs. All Unique Addresses from the Source.
.
That is the duplicates should be removed and uniques should be available.
Please let me know first what he wants then also tell me what to use in the data flow and how to start. I want to understand the logic. Note: Two persons might have the same address or One address might belong to 2 or more people.
This is what my client said.
Please give me what should i have in the output
I am developing a website in visual stadio 2005 and i use vb as a programming language.
I use image button control to show advertisemet in the website. i need to link advertisement to others website URL.
The URLs are sql driven( I stored them in SQL database). what should i to do?
Please help me.
Thanks
I think theres something I'm missing about AG listeners. My test config is 1 SharePoint WFE & 2 SQL servers configured in an AAG.WFE, SQL1 & SQL2Â servers are all on the same subnet.On the WFE, I configured an alias called SP15 to be used for the SQLÂ servers. If I failover from SQL1 to SQL2 I just need to change where the alias is pointing on the WFE. So why do I need a listener? This works fine, albeit manually.I have read on some posts that an automatic failover process is possible. How can I add a 2nd IP address to the listener when both SQL servers are on the same subnet? The GUI doesn't seem to allow this.
View 5 Replies View RelatedMy server is a dual AMD x64 2.19 GHz with 8 GB RAM running under Windows Server 2003 Enterprise Edition with service pack 1 installed. We have SQL 2000 32-bit Enterprise installed in the default instance. AWE is enabled using Dynamically configured SQL Server memory with 6215 MB minimum memory and 6656 maximum memory settings.
I have now installed, side-by-side, SQL Server 2005 Enterprise Edition in a separate named instance. Everything is running fine but I believe SQL Server2005 could run faster and need to ensure I am giving it plenty of resources. I realize AWE is not needed with SQL Server 2005 and I have seen suggestions to grant the SQL Server account the 'lock pages in memory' rights. This box only runs the SQL 2000 and SQL 2005 server databases and I would like to ensure, if possible, that each is splitting the available memory equally, at least until we can retire SQL Server 2000 next year. Any suggestions?
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
Hi,
When I am trying to access SQL Server 2000 database from another machine i got this error
Server: MSg 17, Level 16, State 1 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
but I could access the database on same server and in that server i could access other databases in different server.
Hi All,
View 14 Replies View RelatedHi,
View 36 Replies View Related