SQL Server Admin 2014 :: Buffer Pool Extensions On Shared SSD?
Oct 8, 2015
extending the buffer pool onto an SSD drive that is shared ? For instance, if we had a mirrored system drive(The C logical partition) on SSD's, can we use the remaining space on that mirrored partition to extend my SQL 2014 buffer pool ? I understand that in this scenario, there is some competition for the I/O throughput between SQL Server's extended buffer pool and the OS. We intend to have the pagefile on a different disk, other than this specific SSD.
View 1 Replies
ADVERTISEMENT
Oct 9, 2015
Extending the buffer pool onto an SSD drive that is shared ? For instance, if we had a mirrored system drive(The C logical partition) on SSD's, can we use the remaining space on that mirrored partition to extend my SQL 2014 buffer pool ? I understand that in this scenario, there is some competition for the I/O throughput between SQL Server's extended buffer pool and the OS. We intend to have the pagefile on a different disk, other than this specific SSD.Â
View 11 Replies
View Related
Sep 24, 2015
I am reading about Buffer Pool Extensions, and how it stores data pages on media like an SSD, to speed up retrieval in future. Would this be useless if my mdf files are already on SSD media? At most, I envisage it meaning that instead of grabbing the data from the mdf, it would grab the data from the buffer pool extension drive, but if they are both on SSD's, I'm not sure of how much return I would see.
Has any user decided to use BPE when their data is already on SSD's, and have they noticed any improvement in these cases?
View 1 Replies
View Related
Oct 20, 2011
How do i check the size of the datacache allocated from the buffer pool by sql server?
DMV or anything to show me the pool allocation sizes for the various pools in sql server i think i may be able to work from there.
View 9 Replies
View Related
Jan 23, 2015
I am sure I have seen in the past in a monitoring tool that PLE drops off to 0 whenever we do a backup. I was doing some reading around this however and found something that said backups use a different portion of memory external to the buffer pool (minmax settings).
Is this correct and how can I tell how much memory will be required for a backup?
View 2 Replies
View Related
Apr 16, 2007
Hi, I'm trying to chase down some bottlenecks, and am currently tyring to figure out what's actually in our data buffer pool.
We've recently upgraded to SQL Server 2005 (sp2a); there's 4GB memory on the box (an active/passive cluster) with the /3GB switch set. I'm working on the learning curve for
sys.dm_os_buffer_descriptors and sys.allocation_units [and boy I sure wish SSMS's query windows wouldn't "copy" in HTML]. Based on BOL and some poking around, I've come up with the following query to list pages used within a given database:
SELECT
count(*) cached_pages_count
,isnull(obj.name, '<unidentified object>') TableName
,obj.index_id
,ind.name
from sys.dm_os_buffer_descriptors bd
left outer join (select
object_name(object_id) name
,object_id
,index_id
,allocation_unit_id
from sys.allocation_units au
inner join sys.partitions p
on au.container_id = p.partition_id -- 2005 compatible, but maybe not in future versions
) obj
on bd.allocation_unit_id = obj.allocation_unit_id
left outer join sys.indexes ind
on ind.object_id = obj.object_id
and ind.index_id = obj.index_id
where bd.database_id = db_id()
group by obj.name, obj.object_id, obj.index_id, ind.name
order by cached_pages_count desc
This would appear to list how many pages are sitting in our buffer pool for which objects for the currently selected database. The thing is, for our "main" database, the vast majority of pages fall in that "unidentified" bucket -- their allocation_unit_ids are not in sys.allocation_units (or tempdb, I checked there just in case).
My question is: what are these pages? Where is this data coming from? Might these somehow be related with our execution/query cache, which appears to be larger than our data cache?
As may be obvious, this is all new to me, and any help would be greatly appreciated!
t
View 1 Replies
View Related
Mar 15, 2006
Hello:
I tried to synchronize the SQL 2000 database with the SQL mobile server on PDA with SQL server management studio from SQL 2005. I got the error as €œThe buffer pool is too small or there are too many open cursors. HRESULT 0x80004005 (25101) €?. The SQL database file size is 120MB.
I create the .sdf file on PDA with the following C# code:
string connString = "Data Source='Test.sdf'; max database size = 400; max buffer size = 10000;";
SqlCeEngine engine = new SqlCeEngine(connString);
engine.CreateDatabase();
I think the 400MB max database size and 10000KB max buffer size are big enough to hold that SQL database data and I have already successfully synchronized my PDA with another smaller SQL server database file. I have been kept trying and searching this for couple of days and still can not figure it out.
Moreover, the synchronization always stops at the same table.
Please help and a lot of thanks in advance.
View 1 Replies
View Related
Aug 27, 2015
I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
View 0 Replies
View Related
Feb 2, 2006
I am working with merge replication. The db server is running Windows 2003 Server Std x64 with SQL 2005 Std x64. The IIS server is running Windows 2003 Server Stx x86. The clients are Windows Mobile 5.0 running SQL 2005 Mobile.
I have previously been able to get the test client to initialize a subscription to the publication. I made some changes recently and added about 7 tables, bringing the total articles to 104. Some of the articles have unpublished columns, which means they are using vertical filtering as well. This publication is also using parameterized filters. During publication creation, there are several warnings that "Warning: column 'rowguid' already exists in the vertical partition".
The snapshot agent runs without any errors. When the client attempts to initialize, I get the error "The buffer pool is too small or there are too many open cursors."
My question is 2 part. First, what is causing this error, and second, how can it be resolved?
View 1 Replies
View Related
Apr 14, 2015
I inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
View 4 Replies
View Related
Sep 26, 2013
I want to use BCP to load data from a text file.
By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.
bcp aborts if ANY of the rows contains a FK violation. No data get loaded.
So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.
I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?
View 2 Replies
View Related
Jan 13, 2014
If I install an instance with Windows Only authentication, and then change it to Mixed Mode, if I enable the sa login, the password has already been set. What is the default? If it's generated, how secure is it? Is the password generated? What algorithm is used for that?
View 9 Replies
View Related
Mar 21, 2014
My sql databases in SQL Server 2014 has the status "suspend" as I saw in SQL Management Studio. I can't restore to serviceable condition sql databases through standard procedures. I need to restore .mdf file.
View 9 Replies
View Related
Jun 18, 2014
I am using a monitoring system where I can monitor a numeric SQL result assuming the result is one field and one row.I would like to do this to say monitor the free available space or percentage on say the Master database. DBCC SQLPERF gives me a few columns and results for all databases on the server.
View 2 Replies
View Related
Jun 25, 2014
In our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?
View 1 Replies
View Related
Jul 31, 2014
Is there a way to schedule a sql job to run at different intervals
For eg:
The job should run at
7:00 Am
8:00 AM
and then at 10:00 Am
View 3 Replies
View Related
Nov 19, 2014
We installed the Sql 2014 in Test server.
We observed frequently
"Process 0:0:0 (0x1e10) Worker 0x00000006B6D341A0 appears to be non-yielding on Scheduler 13. Thread creation time: 12906028806348. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 13%. System Idle 84%. Interval: 70189 ms."
Is it better to run the profiler or performan counter?
What are the filters we have to select in the profiler to monitor the Sql server
View 0 Replies
View Related
Dec 8, 2014
I have a SQL server box running 2014 reporting services. I have another server running IIS v8.
I would like to be able to connect to the IIS site and be given the SSRS report browser.
So externally if I browse to [URL], I am presented with the report server interface, the same as if I browse to http://xxx.xxx.xxx.xxx/reports internally.
What are my options?
View 4 Replies
View Related
Dec 11, 2014
What is the best approach for a read only copy of a database that is ~ 1TB. The primary database is fed nightly with an ETL process. We are currently trying to duplicate the ETL to read only server but that process is not going well. So we are looking at other options to let SQL make the copy.
The primary database is on a Win12R2 with SQL 12 or 14, a 2 node A/P failover cluster.
The read only copy will be on a Win12R2 with SQL 12 or 14. It is not a requirement to fail over to the read only copy if the primary should go down.
What would best the approach to accomplish the end result?
View 3 Replies
View Related
Jan 12, 2015
I did not worked on AVG in sql 2012, what are the possible errors and how to resolve in always on in sql 2012 .
View 1 Replies
View Related
Jan 18, 2015
I have 10 databases which are configured as principal in mirroring I need to failover all the databases as part of failover , instead of writing query each database as parner failover, is an script which will generate the databases as principal to failover ?
View 3 Replies
View Related
Feb 18, 2015
How to check the delay in between replicas in AG?
View 3 Replies
View Related
Feb 26, 2015
my 4 GB .OST file is corrupted and i am not able to access my mails and contacts.
View 2 Replies
View Related
Apr 7, 2015
I got query from sysproccesses and the result for one spid is : SQLAgent - TSQL JobStep (Job 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61 : Step 1
Which job has this code : 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61
View 1 Replies
View Related
May 28, 2015
After installing SSMS on some computers - the only way we can get SSMS to run correctly is to run it as the administrator. Is there a way where you don't have to do that? These end users are logging as themselves and have accounts in SQL Server all set up - but SSMS will only launch for them if we right click and select "run as administrator".After doing some digging - it seems that this is a common problem out there.
View 3 Replies
View Related
Jun 19, 2015
Have a SQL 2014 install and cannot for the life of me get the maintenance plan to remove old backups. I've tried everything. Rights to the folder where the backups are stored are adequate, extension set in the clean up task is as it should be, etc. Log shows the job ran successfully. Running the command manually shows successful completion, but backups are still not removed.
View 9 Replies
View Related
Jul 29, 2015
when execute the restore log command, in the messages window it shows how many seconds the restore takes, at the meantime, on the status bar, it also shows the seconds the command takes.
Two values are different and could be very different, please see below examples , restoring takes 1.8 seconds, but in total the command takes 4 seconds to complete, the other one is 8.1 seconds and 12 seconds.
What does SQL Server or Windows do after the restoring?
pic a:
pic b:
I did a xperf, I can see after the restoring is completed, sql server did garbage collect and log write, which just run very quickly, but storage is busy on reading the log file for nearly 2.2 seconds( 4-1.8), and 4 seconds ( 12-8.1) .
pic 1:
pic 2:
see pic 1 above, from 13 to 17, the restore operation is finished, but the storage jump to 100% active to do some reads, only reads no writes. zoom that period shows pic 2, it read 4096 (I don't know the unit size) for about 4 seconds, what does this do?
Data file, log file, backup file are no different drives, but all local drive, the interesting point is the read jumped after restoring, I tested it on different server, same result...
View 1 Replies
View Related
Aug 9, 2015
I've got an old version of SQL Server 2008 R2 Developer Edition on an old PC which is failing. I've got a new PC and have put SQL Server 2014 Developer Edition onto it. Now before the old machine completely dies, I've gotten into SSMS on the old machine and did a backup of the databases I want to save. I've moved the .BAK files to where I could get to them from SSMS on the new machine. I've gotten into SSMS and tried to do a restore the database to my new machine. However I'm getting an error that does not make any sense to me.
The database I'm I've backed up is named JobSearch. When I backed it up, that was the only database I had selected. Like I said I copied the .BAK to the new machine. Got into SSMS, told it that I wanted to restore the JobSearch database, telling it where I wanted to put it, and it then immediately fails with a:
"Restore of database 'JobSearch' failed. System.Data.SqlClient.SqlError: Logical file 'VideoLibrary_Data' is not part of the database 'JobSearch'. Use RESTORE FILEISTONLY to list the logical file names."
Well of course VideoLibrary isn't "the logical file". But neither did I select VideoLibrary (which is a database I also want to move, but I'm doing one at a time). So what in heck is going on here? Why is it complaining about a database I haven't even selected to back up? Why, when I check everything on the old machine, it's backing up JobSearch, but on the new machine it sees VideoLibrary?
View 6 Replies
View Related
Aug 24, 2015
I am new in SQL Server, What to check ,what action do i need to take while adding a new column to a table.
View 5 Replies
View Related
Oct 6, 2015
Message: Executed as user: NT AUTHORITYSYSTEM. The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases [SQLSTATE 42000] (Error 9002). The step failed in my sql server agent job i have the above error, this type of errors i got some of multiple jobs.
View 9 Replies
View Related
Nov 7, 2015
A log file size of a production database has been increase from 4gb to 150 gb initial size.Now i want to find when it will grow & how much it grow & which transaction is responsible for this.
View 6 Replies
View Related
Dec 3, 2013
We have applications connected to SQL using windows authentication. While having connection with Application user can also access to Database instance on the same time as well. We need to limit the access of user outside application.
View 6 Replies
View Related
Dec 4, 2013
And have chosen the destination - unstructered (flat) file. But the wizard proposes to export only one table (dbo.Acocount) and all the others from the list are not exported. How can I export ALL the data into one file.I need to do this to edit the syntax in the editor and then import this data and database structure into Postgresql
View 4 Replies
View Related
