SQL Server Admin 2014 :: Cannot Connect To Named Instance (2nd Instance) From Local SSMS
Jul 22, 2015
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamicsFINANCE) using SQL authentication from local SSMS, I get below error message:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamics FINANCE) using SQL authentication from local SSMS, I get below error message.A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)I assigned a static port number to the named instance [dynamicsFINANCE]Â 1450. I also setup the firewall rule to allow access to Port 1450.
I have an existing 2012 default SQL Express. It's set up on a VPS managed by a third party. I have an administrator account on this 2012 Windows server. I'm not much of a sysadmin or a DBA but I get around. ;)
I've installed a new NAMED instance on this VPS and can not connect to it with client tools (SSMS). If I remote in, I can connect this way.
What steps might a seasoned DBA expect to make when getting a new named instance ready for the world.
Assign a port? Check the port?
Open the firewall for the port?
Will this new named instance listen on a different port than the previously installed SQL Express instance?
I try to connect from a pc to a SQL Server on another pc. Both pc’s are in a workgroup. I want to connect from a Windows Forms application to a named instance on the other computer. By now I have been able to connect from one pc to SQL Server on the other with tcp:smurfin, 52782.
I want to be able to use servernameinstancename (instead of portnumber) to make a connection in a Windows Forms application.
I’ve checked / tried te following:
•In the properties of the instance, tab Connections, the option Allow Remote Connections is enabled •In Configuration Manager: TCP is enabled •The service SQL Server Browser is started •On the tab IPAddresses, in the section IPAll, there is NO portnumber for TCP Port. And TCP Dynamic Ports has the nummer 52782 •I have created un inbound rule for port 52782 and also for 1434 (SQL Server Browser). And to be on the save side: a rule for 1433 as well. •Restarted the service
If I run the following code in SQL Server, that same port number (52782) is returned:
EXEC xp_ReadErrorLog 0, 1, N'Server is listening on', N'any', NULL, NULL, 'DESC' GO SELECT local_tcp_port FROM sys.dm_exec_connections WHERE session_id = @@SPID
I changed the Port of my named instance to use static port but still error log is giving two values ,why??
spid15sServer is listening on [ 'any' <ipv6> 50152]. spid15sServer is listening on [ 'any' <ipv4> 50152]. ServerServer is listening on [ ::1 <ipv6> 57518]. ServerServer is listening on [ 127.0.0.1 <ipv4> 57518].
I have a 3 node cluster on which I have installed SSAS as it's own insntance. I have created this as a named instance and can connect to it by serverinstance if I'm on the server itself. However from my desktop I get the error saying instance was not found on server name.
I have defined an alternate port and setup firewall rules and can connect via server:port but not serverinstance. Prior to making this change SSAS was running on default port of 2383 and I could connect just by servername.
I have read many articles for previous versions saying that clustered SSAS will always use 2383 and that you must connect just using servername. However and this is were it gets strange. I have a 2 node UAT cluster with SSAS setup exactly the same way I've described above and I can connect from my desktop as serverinstance.
Should I be able to connect as serverinstances for a named clustered instance in 2012 ?
We have 3x instances of SQL Server 2012 installed on a single remote server - there's the default MSSQLSERVER instance, then INSTANCE01 and INSTANCE02. I can remotely connect to the default MSSQLSERVER instance through SSMS, but I cannot connect to either of the additional named instances (INSTANCE01 or INSTANCE02).Â
For example, if I try to connect to "sql.domain.com", I can successfully access the default instance on the remote server. If I try to connect to "sql.domain.comINSTANCE01", I get an error stating
"A network-related or instance-specific error occurred while establishing a connection to SQL Server".
However - if I try to connect to "sql.domain.comINSTANCE01, 49301" (where 49301 is the TCP Port for the TCP/IP Protocol for this SQL Server instance), I am able to successfully connect.
This leads me to think that there's a communication issue with the SQL Server Browser service running on the remote SQL Server and my workstation.Â
The following items have been verified:
SQL Server Browser is running on the remote SQL ServerWindows Firewall has been disabled on the SQL ServerTCP Ports 1433, 1434, 1954, and 49301 have been opened up on the remote destination's firewallUDP Port 1434 has been opened up on the remote destination's firewall.
I have two instances of SQL Server on the same PC:
Default instance: SQL Server 2000 Named instance with name €œMS2005€?: SQL Server 2005. Also I have another SQL Server 2005 on another PC.
I created a .NET 2.0 Compact Framework application that connects to the database and executes simple query. This application can connect to any instance of the SQL Server when it is executed on the PC (not on the server). But the problem is that when I try to execute the application from the windows CE 5.0 device, the application can only connect to the default instance (SQL 2000 and 2005) and can not connect to the named instance (Name: MS2005). Is it some kind of limitation of the SqlClient library for the compact framework?
How to set up a specific aliased instance name. I have installed two identical named instances on a server called LONPOCSQL. The instance names are FINPROD and FINREP, so when connection to them remotely I connect to LONPOCSQLFINPROD or LONPOCSQLFINREP. My question is how can I configure it so that I can connect remotely to the instances in by referencing them as FINPRODFINPROD and FINREPFINREP?
The reason for this is that I need to replace a very old system where the applications connect to the sql servers by referencing them as FINPRODFINPROD and FINREPFINREP respectively. I'm trying to set up a 2-node SQL alwayson AG cluster for HA+DR with one server in the prod DC and the other in DR. I need both instances to live one the same box.
1. As far as I'm aware SQL Aliases only work when the connection is local, remote connections fail 2. I can't create a DNS alias called "FINPRODFINPROD" and point it at a listener name as slashes "" are not allowed in DNS CNAMEs 3. My old boss once built a SQL 2008 R2 failover cluster with two instances on it called "lonsql40lonsql40" but there is no documentation on how he did it and I can't find anything on the web
I have built a SQL 2014 Always on Cluster. I need to create three Availability groups and listeners in the same instance. Do I need 3 separate IP address for each listener or one IP address can be shared for all 3 Listeners ?
When I setup my listener: ListenerA...Do I need to use the instance name in it?
ListenerAInstance01 or ListenerAInstance02 depending on which SQLNode is the "active" availability group?
Am I better off to use the same instance name for both nodes, since my goal is to have all databases on both instances in the same availability group and sync'd? When SQLNode1 migrates over to SQLNode2 I will need to update the instance name in my connection string on the listener from ListenerAInstance01 to Instance02? When I connect with SSMS do I just use: ListenerAInstance01 (or 02)?
How you are handling the replication of the many instance-level objects/items (logins, linked servers, server roles, database mail, operators, on and on) to the replicas in an AlwaysOn topology.
I'm especially curious about DBAs managing larger SQL Server environments. In my current environment, we have approximately 80 production SQL instances containing about 650 databases that require high availability and disaster recovery.
We use mirroring today and have a solid, home-grown solution for replicating the instance-level items from production to disaster recovery. AlwaysOn changes things a bit since we'll have multiple replicas and of course the database could be active on any one of those at any time. So my concern is about instance-level items being created in one instance but never deployed to the other instances participating in the AG group.
I am trying to setup a client alias to connect to a named instance on another server.
TITLE: Connect to Server ------------------------------ Cannot connect to fred. ------------------------------
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
[URL]
The network path was not found
------------------------------ BUTTONS: OK ------------------------------
I have set up the alias on the server and as expected it works. On the client side I have used the SQL Server Client Network Utility to configure the client side alias but no luck
I am using TCP/IP with a specific port ..
By the way the SQL is SQL Server 2012 Ent and the O/S is Windows 2012 R2 minshell
The box I am trying to connect to is running two instances of SQL Server. There is a SQL Server 2005 instance which is the default. There is a SQL Server 2000 instance which is named 'SQLSERVER'. I can connect to the SQL Server 2000 instance no problem:<add key="ConnectionString" value="server=MYPCSQLSERVER;database=mydatabase;user id=****;password=****" /> However, I am having trouble connecting to the Default SQL Server 2005 instance. I have tried: <add key="ConnectionString" value="server=MYPC;database=mydatabase;user id=****;password=****" /> but it doesn't work. I have tried explicitly setting SQL Server 2005 to use port 1434 (as SQL Server 2000 is running on port 1433), and then used: <add key="ConnectionString" value="server=MYPC,1434;database=mydatabase;user id=****;password=****" /> but this doesn't work either.
Am I mssing something here? Any help much appreciated Thanks...
We are seeing some very strange behavior on installation for our application when it is trying to enumerate the available SQL Server instances. On some machines (not yet determined why) the SQL Browser service is apparently able to locate remote instances but not the local instance. This does not seem to map to any firewall or TCP/IP settings which we can determine. We have gone to the extent of uninstalling all associated firewall and antivirus products, and the problem persists.
For the moment, we are working around this problem by interrogating the registry for the instances installed locally, but this seems unsatisfactory in the long run. Is there any possibility that other instances of SQL Server Express or MSDE have somehow disabled our ability to see local instances? I would really like to find a better solution to this problem.
How you would calculate the average read/write latency experienced by a SQL Server instance during a specific time window in order to monitor this for multiple instances. From this MSDN blog, I know that you have to take multiple samples and do some calculations to get the correct latency.
[URL] ...
However, the SQLServer:Resource Pool Stats object tracks these numbers per resource pool and we want to get one number for the whole server. Since there can be a different base value for each resource pool, you can't simply sum the numerator values together. Here's some sample data from a server that illustrates the problem.
object_name counter_name instance_name cntr_value cntr_type SQLServer:Resource Pool Stats Avg Disk Read IO (ms) default 307318919 1073874176 SQLServer:Resource Pool Stats Avg Disk Read IO (ms) Base default 25546724 1073939712 SQLServer:Resource Pool Stats Avg Disk Read IO (ms) internal 2045730 1073874176 SQLServer:Resource Pool Stats Avg Disk Read IO (ms) Base internal 208270 1073939712
I'm thinking I would need to do some sort of weighted average, but I'm not sure if that will result in the correct value. Here's the formula I am thinking about using currently before doing the calculation over time
I recent installed a named instance of SSRS 2005 on a remote server. The server has a side by side install of SSRS 2000 and SSRS 2005, with the SSRS 2005 being a named instance. The server also has SSL and MS Sharepoint Portal Server installed.
When I try and connect to the SSRS 2005 instance with my client install of Mangement Studio, I get the error message:
"The underlying connection was closed: Could not establish a trust relationship for the SSL/TLS secure channel. (System.Web.Services)
Additional Information: The remote certificate is invalid according to the validation procedure. (System)."
Obviously, this is a SLL issue, but, not being a security guru, I have no clue on how to fix this. I do know the certificate is valid, not expired and properly working. Both installs of SSRS are set up using the SSL certificate. Also, I am not connecting to SSIS with Management Studio, as I heard there is a bug connecting to both SSRS and SSIS at the same time.
I have installed a SQL Server 2005 Standard Edition instance with SSIS on Window Server 2003 x64. From my PC, I am able to connect to the Integration Services on the server using Windows Authentication but not with a local SQL login - and the option to change authentication methods is greyed out.
Is it possible to remotely connect to SSIS using a SQL login rather than a Windows login? If so, any ideas or references for configuring it as such?
Hi, I am struggling connection to a named instance of SQL 2000 (SP4) from another machine but without any success. I get an error message saying that the server does not exist or access is denied.
The security configuration in this named instance is the same as the default instance (also 2000) and the remote machine can connect to it successfully.
I also configured the aliases in Client Network Utility in the client machine and set the server (machine) name and the port number used by the instance - but no help.
I use osql and Query Analyzer to connect to it, but I cannot connect by any of them.
Connecting locally, in the machine where the instance is installed, is successful.
The same behaviour appears when I try to connect to another instance on the machine which is 2005. Something with the named instance is problematic.
my local instance of reporting services is named and therefore I think causing me a problem when I issue the following command to set up an unattended account...
rsconfig -s localhostinstance name -e -u domain nameuser name -p password
the message I keep getting is "No Reporting Services instance found on local host.". I tried a couple of things including replacement of the word localhost with my computer name but to no avail. I tried single and double quotes around the -s parameter but no success.
Hi, I have a task in hand to migrate (upgrade) from SQL2K named instance to SQL2K5 default instance. There are many intranet applications touching current SQL2K. I would like to perform this upgrade such that I don't have to touch any application code - meaning I don't have to change the connectionstring to point to new Default instance. How can I achieve this?
So, in otherwords, here is what I want to achieve:
Current Server: SQL2K: SERVER_AINSTANCE_A (named instance)
If I have both default, I could achive this by setting up DNS alias after migration done so that any call for SERVER_A would point to SERVER_B. But in my case, I don't have SERVER_A, I have named instance. Is there any solution?
I have just recently installed MS SQL Server 2005 Developer edition. I have installed SP2.
Today when I try to connect via Management Studio, I get the following error: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (.Net SqlClient Data Provider)
I installed it as a default instance.
I recently added a login with dbo privileges. I have tried logging in with that sql account and also with windows authentication to no avail.
I just installed SQL Server 2005 Enterprise edition from my company's DVD. It was installed with the setting of using both Integrated windows authenitication as well as basic named authenication. I installed all the options too: Database Engine, Analysis Services, Reporting Services, SQL Server compact edition, and Integration Services. When I look at services there are: SQL Server Integration Services, SQL Server Analysis Services, SQL Server Reporting Services, and SQL Server Browser. All of which are running. Something that took me offguard was the installation did not ask me to provide an SA password. Other than that, the install looked like it went good.
I was able to connect to the local instance of the SQL Server 2005 using the SQL Server Management Studio. I could connect with SA, or connect with Integrated Windows Authenication. Whoohoo. Off and running! As a matter of fact, for the SA account I could use any password and it would still log me in.
First thing I did was I went in to the copy wizard to attempt to copy a database from a server on our network to my local box. First it asked me for the remote server. Then when I specified my local instance in the wizard, the wizard complained that my local instance was NOT SQL Server 2005. Doh! This I didn't understand. I figured maybe I need to check for MS updates. Sure enough, I found that ther was a SP2 and then a hot-fix for that SP2. I applied both. Now I cannot connect from SQL Server Management studio to my local instance of SQL Server 2005 database server. I get the following error:
"An error occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)"
However, I went in to see what other services I could connect to, and here's the results:
Analysis Services : OK! Reporting Services (Windows Auth/Basic/Forms) : NG "The reporting Services Instance could not be found (Microsoft.SqlServer.Management.UI.RSClient)" SQL Server Compact Edition : NG "The database cannot be found. Check the path to the database. [ File Name = CCG092 ] (SQL Server Compact Edition ADO.NET Data Provider) Integration Services : OK!
I can connect to other SQL Server databases on our network. However, just not my local one. No one on the network can connect to me either.
I even turned off my windows firewall and still no luck connecting to my own.
So something really went wrong when I applied SP2, however, admittedly from the error message when I tried to use the copy wizard, something was probably already wrong.
Hi- I am hoping someone can help me or shed some light on an issue I am having. I have recently moved to a dedicated server with MSDE installed on it. The server was installed as the default instance and I changed the password to the SA account. I then copied my entire SA database over to the new MSDE database and everything was working good so it seemed. I believe at some point during copying of the data, or after installalling an application the SA account begain to fail and the password was changed. I have no idea how this happened, and better yet when I tried to change it logged in as the administrator with OSQL it told me I did not have sysadmin rights (I tried multiple Windows NT Auth logins and still got this error trying to change the password). So... I reinstalled MSDE and created a named instane. I then attached the mdf/ldf files to my named instance and am able to connect ok from a .NET application directly to my new MSDE Named Instance database. Sounds like everything is great right? Not really, I can't figure out how to connect through enterprise manager and its driving me CRAZY! 1. I CAN connect via any .NET app and a connection string 2. I CAN connect via the server with OSQL 3. I CAN connect via the web based enterprise manager (which is very limited and a freeware ASP app). 4. I CANNOT connect via enterprise manager. I have verified from the (SVRNETCN.EXE utility) that the port is open and have tried connecting to MY_IPADDRESSNAMEDINSTANCE but no luck. One additional side note, when I wasn't using a named instance I had no problems connecting through enterprise manager to my default MSDE instance. Any help would be grealy appriciated, this is driving me nuts! -Chad
Can't connect to local server instance MSSQLSERVER in SQL Server Management Studio (SQL2005 sp2/Vista).
SQL Server Configuration Manager reports SQL Server2005 services: SQL Server (MSSQLSERVER) Running. This would indicate the name of the SQL server is "MSSQLSERVER" correct? I chose "default" instance during the install and that is the name it gave itself.
I tried connecting to the server using the following for the Server Name: MSSQLSERVER and .MSSQLSERVER neither works.
The only thing that works for my installation is just plain "." (no quotes) and nothing else. Can this be correct because I can't find any reference to this. Thanks.
I am trying to set up a Named Instance of SQL 2000 on the same machine that has a default instance of SQL 7.0. The setup always completes and I am able to register the Named Instance of the SQL Server with which it was installed on. However, when I try to connect the users to the database, with both windows and SQL authentication, I receive a SQL server not found error. I have tried an alias setup as well as physically specifying the port number in settup up an ODBC connection. Has anyone ran into similar problems? Also, has anyone been able to successfully complete the process as mentioned above?
I have a server with sql server 2005 installed as the default instance -- I have a piece of software that needs SQL2000 to be the default instance. Is there a way other than install new sql2005 named instance and move databases to rename my SQL2005 instance from <machinename> to <machinename>sql05 for example?