As CM doesn't support SQL authentication, and if access SQL Server on another domain with no trust, we cannot use Windows authentication as well.
CM only supports Windows authentication, but for large organizations which will have multi domains.
I am thinking if there is no proper way/tool, we will develop one then.
As CM doesn't support SQL authentication, and if access SQL Server on another domain with no trust, we cannot use Windows authentication as well.
CM only supports Windows authentication, but for large organizations which will have multi domains...
Is it possible to configure transnational replication between two different domains also non trusted domains.
It's possible means what i need to take care before configure replication and how to configure transnational replication between two different domains.
I am setting up SQL 2014 always on. I was able to set up the replicas between 2 servers in the same subnet.Their IP addresses are say like this:
100.20.200.200
100.20.200.201
When I am trying to introduce another node into the cluster which has IP address like 100.10.101.102, I am getting an error that the server isn't reachable.
deploying a 2 node SQL AAG, with one VM each DC, in sync mode, in an active-active DC layout, with 1ms RTT and 1Gbps? Similar to a SAN based geo-cluster. HA and DR in a single tin.I'm trying to minimise license costs. Having the 2 node in DC1, with async to site 2 is double the license cost!!
View 5 Replies View RelatedI am trying to build out an AlwaysOn AG with 2 nodes each in a different subnet (in AWS if that matters), windows 2012r2 / SQL 2014 RTM
I created a AG Listener with 2 ip address, 1 for each subnet (checked that neither ip address are used). But whenever i failover the AG to the secondary, and try and connect via the listener it fails,
I am trying to connect via SSMS from the primary instance. and just time out, If i roll over to the primary i can connect no issues, I've tried playing with the connection settings, upping the time out to 30 secs, adding the MultiSubnetFailover=true. etc but not getting any joy.
Is there any way to enforce table references in stored procedures? For Example, we have stored procedures with a ton of different formats, "dbo.table", "table", "db.dbo.table", etc. Can we make it so that for every stored procedure, the reference must be at least "dbo.table"?
View 1 Replies View Relatedis bulk logged recovery model support point in time recovery
View 9 Replies View RelatedWe have a SQL 2014 AlwaysOn availability group running on two Windows 2012 R2 servers that are in the same subnet. We created a new server in a second subnet, installed SQL, joined the server to the Windows cluster, added a new IP resource for the new cluster, and performed the other remaining steps to add a new AG replica to the SQL instance on this new server. When we try to move the core cluster resources to the new node to test failover, we get an error. Here's the command we've been using:
Move-ClusterGroup "Cluster Group" -Node node3
and it returns the error: The operation failed because either the specified cluster node is not the owner of the group, or the node is not a possible owner of the group...I've checked the ownership of the cluster groups and the cluster resources and it looks like they are set appropriately:
>Get-ClusterGroup | Get-ClusterOwnerNode
Cluster Object Owner Nodes
---------------- ---------------
Available Storage {}
Cluster Group {node1,node2,node3}
SQLAG {node1,node2,node3}
[code]....
We've double-checked that all IP resources are in the right subnets and that the dependencies for the Cluster Name resource and the Listener Name resource are set appropriately. I'm not sure what else to check since the PowerShell commands seem to indicate that node3 is an owner of the appropriate resources. What other things need to be checked or if the ownership being checked isn't the same as what PowerShell is checking?
Is there anyway we could retrieve the job history for all the jobs in all the sql server using Central Management Server?
View 0 Replies View Relatedi have used CMS in SQL 2008 R2. i have added couple of servers in its group. i have executed a query & i need to send the query output in the form of email.
basically query is checking the rows count from couple of user tables in servers.
issue here is how to copy the data that is used by CMS? i need to work on automate the rows count in difft user table in db servers.
I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
Hi,
This is chirag patel.
we are going to develop web application which can disply data (Search Results) in different language.
if user selected country Japan, then search results should be in Japanese.
if user selected country Chian, then search results should be in Chinese.
now i want to store all these read only data in Database. how and where i can store it?
do i need to have different Databases? or with single database also i can achive?
I means what is advisable approach to achieve this?
if Single Database for all countries then how i can store same data in different languages in single table?
please guide me if anyone know how to achive such kind of scenario in SQL Server?
I am asking about a virtual IP for SQL Server, is there a way we can assign a different IP to SQL Server other than the server's(host) IP address? like the same what we do in a clustered env.
View 3 Replies View RelatedI've recently started working with a public sector organisation who have 4 clustered sql instances that has 80% of it's db mirrored.
Looking at the transaction log - it seems that a transaction log backup is a good idea as the log is 4x larger than the data file.But I'm not allowed access to the physical server to check onto which drive I can create the trn. No RDP, no vmware - let's be honest I'm not even allowed to launch cmd line Also the Server Manager informs me "We will need to carefully look at database backups if you guys want to start doing these backups on box, as that will break our off box backup routine (it will screw the transaction chain)."
I don't understand how backing up the transaction log could break the "transaction chain"?
We are trying to create some alerts in our SQL Server 2014 BI edition.Issue is that, after I chose "Type" as "SQL Server performance condition alert" nothing is listed in the "Object" list box.SQL Server event alerts are working. Issue is only with "SQL Server performance condition alert".
View 3 Replies View RelatedI Run All checks for Validation cluster.I get Error On Disk Lists And Validation failed.With This error : Failed to prepare storage for testing on node "server name" The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.
View 2 Replies View RelatedWe recently had a problem with DB Mail. SQL jobs that sends an email succeeded but the email in the job fail to sent. There was a problem with the email server. The error is included. We fixed the problem with the email server. How can I get an alert when a DB Mail email fails send?
Date4/23/2015 10:01:06 AM
LogDatabase Mail (Database Mail Log)
Log ID5907
Process ID13204
Mail Item ID5702
Last Modified4/23/2015 10:01:06 AM
Last Modified Bysa
Message
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2015-04-23T10:01:06). Exception Message: Cannot send mails to mail server. (Insufficient system storage. The server response was: 4.3.1 Unable to accept message because the server is out of disk space.).
)
We have oracle linked server created on one of the sql server 2008 standard , we are fetching data from oracle and updating some records in sql server . Previously its working fine but we are suddenly facing below issue.
Below error occurred during process .
OLE DB provider "OraOLEDB.Oracle" for linked server "<linkedservername>" returned message "".
Msg 7346, Level 16, State 2, Line 1
Cannot get the data of the row from the OLE DB provider "OraOLEDB.Oracle" for linked server "<linked server name>".
Is it possible to have Analysis Services in both modes or are they mutually exclusive?I have a machine setup with Multidimensional AS and would like to know if it's possible to add a Service in Tabular mode.
View 2 Replies View RelatedI want two write a small script to determine which is the currently active (primary) server in the AG.
Right now, I see that using SELECT * FROM SYS.dm_hadr_availability_replica_states I can determine the role. However, when the server goes down and switches to the secondary node, I don't believe that the role changes (or does it?). How do I determine which is the active node?
We are consolidating some old SQL server-environments from 'OLD' to 'NEW' and one of our vendors is protesting on behalve of the collation we use on our 'NEW' SQL server.
Our old server (SQL 2005) contains databases with collation SQL_Latin1_General_CP1_CI_AS
Our new server (2014) has the standard collation Latin1_General_CI_AS
Both collations have CI and AS
From experience I know different databases can reside next to eachother on the same Instance.
The only problem could be ('could be !!') the use of TempDB with a high volume of transaction to be executured in TempDB and choosing for Snapshot Isolation Level ....
The application the databases belong to is very static, hardly updated, and questioned only several time per hour (so no TempDB issue I guess).
using different databases using a different collation running on the same instance?
I need to migrate Reports from a SQL Server 2008 R2 Server to SQL Server 2014 Reporting Services.
Reporting Services is installed on one Server and the Reporting Services is installed on another Server.
On the existing Server the Encryption was never backed up.
What do I do with the key?
The following article provides some good information but it does not identify what to do with the Destination URL.
It mentions to download the files but it does not specify how to identify the path and it does not state where to upload them.
Do you restore the existing Reporting Services Databases to the new Server?
[URL] .....
I need to do testing on capturing connection coming from outside using Profiler. Basically I need to do something from other SQL servers connecting to this SQL server and test if it is captured by profiler.
View 4 Replies View RelatedI need some clarification about adding file in to mirrored dataabse in primary server without downtime and breaking the mirror server.
In our environment we are using monutdisks in both the servers. in primary for ex we have F drive for data files under mount disk 3 in mirror server also we have same drive but in mount drive2.
As per my knowledge if it is same drives we can add the ndf files in the primary that will reflect on mirror. but in current situation i am confusing about mount points with different names.
In SQL 2008 R2, if we clone an environment including SQL server, the maintenance plans retain a connection string to the source/original server they got cloned from and are not editable. But, I was able to use a work around by editing them in BIDS and saving them back on the server. But now with 2014, I am facing two issues:
1.I still can edit the package to correct the server connection, with SSDT; but the option to save back to the server is not available any longer!
2.I used to be able to see all my plans under SSIS in 2008 R2 but not in 2014 now. Although, they are listed in SSMS!
I'm looking for a way to list the target servers associated with a master server. The reason is that we're moving to another master server, and I'd prefer not to move the targets manually.
I've got most of the T-SQL already (sp_msx_enlist, sp_add_jobserver), but I'd like a scripted solution instead of a wizard.
I use following trigger to stop user "smith" if he try to connect through SSMS to My Server:
create TRIGGER [trg_connection_MyServer]
ON ALL SERVER WITH EXECUTE AS 'Smith'
FOR LOGON
AS
BEGIN
IF ORIGINAL_LOGIN()= 'Smith'
begin
if exists (SELECT 1 FROM sys.dm_exec_sessions
WHERE (program_name like 'Microsoft SQL Server%' and original_login_name = 'Smith') )
ROLLBACK;
end
I want to log this information or send emal incase, this user try to connect through SSMS, so that I can catch it. How can I do this, if I use insert command it rollsback everything and I can't do any activity.
I have an issue to restore an encrypted backup via GUI.I can restore an encrypted backup on another instance using t-sql command, but cannot do the same using the GUI of sql server 2014. The message error is: No backupset selected to be restored.I have restored the master key from the instance where the encrypted backup was created on the instance where I want to restore the encrypted backup, then restored the certificate. I managed to open the master key. I have the following versions:
On the instance where the encrypted backup is taken:
Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
On the instance where I'm trying to restore the bakcup via GUI:
Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: )
I have been tasked with auditing all DDL and selected DML events on a production server and logging them to a table. My solution is to use CDC for the DML and a Server-Level trigger for the DDL. Because there should never but much DDL activity on the server (except when performing update tasks) I don't need to worry about the trigger consuming too many resources.
My question is this: Is there any single specification such as DDL_LEVEL_EVENTS that can capture all DDL activity or do I need to specify each and every DDL action in the trigger?
How to update the windows patch on sql server where the server is configured in always on ?
View 4 Replies View RelatedIs there any way to find Report server database name using T-SQL?
I have SQL server report server instance and authentication credentials.
I can use sys.databases but in case of user had changed ReportDb name at the time of configuration this approach will not work then How I can find?
I am playing around in a test environment with SQL Server 2014. I have a question about the default location of the report server databases when you have multiple report server instances installed on one server.
I did a very simple install of SQL Server 2014 with the database and Reporting Services in Native Mode (install only) features selected. Accepting the default locations, I ended up with the following locations as you would expect:
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVER
C:Program FilesMicrosoft SQL ServerMSRS12.MSSQLSERVER
Running the Reporting Services Configuration Manager, I created the Report Server database. After creating the Report Server database, the related files will be located below in the SQL folder as I would expect.
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVERMSSQLDATA
Next I installed another instance, which I called Test, of SQL Server 2014 like I did above. I now have the following folder structure the Test instance as I expect.
C:Program FilesMicrosoft SQL ServerMSSQL12.TEST
C:Program FilesMicrosoft SQL ServerMSRS12.TEST
Running the Reporting Services Configuration Manager, I select the Test instance and create the Report Server Test instance database.
My first thought would be that the Test instance Report Server database would be in the following location:
C:Program FilesMicrosoft SQL ServerMSSQL12.TESTMSSQLDATA
Instead this database is located with the default instance Report Server database:
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVERMSSQLDATA