SQL Server Admin 2014 :: Clone SSRS VM For Scale Out Deployment
Sep 4, 2015
Ive successfully cloned an SSRS VM Server within a scale out deployment to REPLACE a current physical machine. This wasn't too difficult.
The issue im having now is in creating a new SQL 2014 Environment with 3 SSRS nodes. Ive taken the time to build one up. Changed all my config files, installed all components etc & tweaks needed within my company...
I have now hit a brick wall though. Ive cloned this first server twice to give me 3 nodes. This is a new environment so the issue I have is that the rsreportserver.config files all now have the same InstallationID. I dont have any existing nodes to overwrite these files with. So when I attach the nodes to the database they will update the keys table with the same InstallationID as the first node and none will work.
Any way to force the SSRS setup to re-generate an installation ID - by repair maybe? Or is this something I can manually just make up?
View 0 Replies
ADVERTISEMENT
Sep 16, 2015
I need to grab the value of the ReportFolder built-in global filed to a particular report on Report Manager, i.e., the full path to a particular report, when the user runs/executes the particular report, SSRS. Once I get this I need to process the path and get the Parent folder to the report and pass that to a stored procedure to do some business logic.
View 0 Replies
View Related
Jun 23, 2015
I am playing around in a test environment with SQL Server 2014. I have a question about the default location of the report server databases when you have multiple report server instances installed on one server.
I did a very simple install of SQL Server 2014 with the database and Reporting Services in Native Mode (install only) features selected. Accepting the default locations, I ended up with the following locations as you would expect:
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVER
C:Program FilesMicrosoft SQL ServerMSRS12.MSSQLSERVER
Running the Reporting Services Configuration Manager, I created the Report Server database. After creating the Report Server database, the related files will be located below in the SQL folder as I would expect.
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVERMSSQLDATA
Next I installed another instance, which I called Test, of SQL Server 2014 like I did above. I now have the following folder structure the Test instance as I expect.
C:Program FilesMicrosoft SQL ServerMSSQL12.TEST
C:Program FilesMicrosoft SQL ServerMSRS12.TEST
Running the Reporting Services Configuration Manager, I select the Test instance and create the Report Server Test instance database.
My first thought would be that the Test instance Report Server database would be in the following location:
C:Program FilesMicrosoft SQL ServerMSSQL12.TESTMSSQLDATA
Instead this database is located with the default instance Report Server database:
C:Program FilesMicrosoft SQL ServerMSSQL12.MSSQLSERVERMSSQLDATA
View 2 Replies
View Related
Apr 22, 2015
I have two SQL 2014 Enterprise Edition installed with the SSRS (native) role installed.
Both server are configured separately with their own Report Server database. Now I want to configured a scale out deployment with a shared database.
On Server 1, I created a new Report Server database. On the second server, I change the database and joined the existing database. The problem is that the second server never shows up under Scale-Out deployment (Waiting to Join).
View 6 Replies
View Related
Jul 25, 2014
We have reports in SharePoint integrated mode which are really slow when compared to native mode. I have been asked to research and give info on what exactly causes the delays.
Any articles which give me information as to what happens when a report is run from SharePoint server and where does it log.
View 1 Replies
View Related
Aug 27, 2015
I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
View 0 Replies
View Related
Sep 5, 2007
I have a question about Report services scale out deployment.
In the technet document it states that reporting services must be Enterprise edition for scale out deployment functionality, does anyone know if the database engine has to be Enterprise also, or can it be standard edition?
Here is the article excerpt from technet:
The Reporting Services edition must be Enterprise, Developer, or Evaluation. Standard edition does not support a scale-out deployment. You can create a scale-out deployment using a combination of editions as long as the edition supports the scale-out feature.
Future guru in the making.
View 3 Replies
View Related
Feb 13, 2008
We have a problem authenticating domain users contained in local machine user groups across multiple web servers in a scale out deployment.
When we originally setup our single SSRS database server we were told the a best practice is to add domain users to local user groups on the SSRS machine.
Now we want to add more web servers and create a scale-out deployment. So, we added the web servers and configured the scale-out deployment. But, only administrators can see the reports since all of our SSRS roles are assigned permissions such as "Machine1User_Group".
We were told that we have to create identical local groups on Machine2 and Machine3 and then add them to the SSRS roles. This is prohibitive since it would mean managing 3 identical user groups containing thousands of domain users.
Is there a better way to do this without using Domain User Groups?
Thank you for any assistance.
View 3 Replies
View Related
Mar 15, 2007
Hi,
I have been trying to get report services installed but another error came:
The feature: "Scale-out deployment" is not supported in this edition of Reporting Services. (rsOperationNotSupported) (rsRPCError)
This error comes when I try to view either http://localhost/Reports or http://localhost/reportserver
Any suggestions?
thank you.
View 2 Replies
View Related
Apr 14, 2015
I inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
View 4 Replies
View Related
Sep 26, 2013
I want to use BCP to load data from a text file.
By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.
bcp aborts if ANY of the rows contains a FK violation. No data get loaded.
So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.
I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?
View 2 Replies
View Related
Jan 13, 2014
If I install an instance with Windows Only authentication, and then change it to Mixed Mode, if I enable the sa login, the password has already been set. What is the default? If it's generated, how secure is it? Is the password generated? What algorithm is used for that?
View 9 Replies
View Related
Mar 21, 2014
My sql databases in SQL Server 2014 has the status "suspend" as I saw in SQL Management Studio. I can't restore to serviceable condition sql databases through standard procedures. I need to restore .mdf file.
View 9 Replies
View Related
Jun 18, 2014
I am using a monitoring system where I can monitor a numeric SQL result assuming the result is one field and one row.I would like to do this to say monitor the free available space or percentage on say the Master database. DBCC SQLPERF gives me a few columns and results for all databases on the server.
View 2 Replies
View Related
Jun 25, 2014
In our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?
View 1 Replies
View Related
Jul 31, 2014
Is there a way to schedule a sql job to run at different intervals
For eg:
The job should run at
7:00 Am
8:00 AM
and then at 10:00 Am
View 3 Replies
View Related
Nov 19, 2014
We installed the Sql 2014 in Test server.
We observed frequently
"Process 0:0:0 (0x1e10) Worker 0x00000006B6D341A0 appears to be non-yielding on Scheduler 13. Thread creation time: 12906028806348. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 13%. System Idle 84%. Interval: 70189 ms."
Is it better to run the profiler or performan counter?
What are the filters we have to select in the profiler to monitor the Sql server
View 0 Replies
View Related
Dec 8, 2014
I have a SQL server box running 2014 reporting services. I have another server running IIS v8.
I would like to be able to connect to the IIS site and be given the SSRS report browser.
So externally if I browse to [URL], I am presented with the report server interface, the same as if I browse to http://xxx.xxx.xxx.xxx/reports internally.
What are my options?
View 4 Replies
View Related
Dec 11, 2014
What is the best approach for a read only copy of a database that is ~ 1TB. The primary database is fed nightly with an ETL process. We are currently trying to duplicate the ETL to read only server but that process is not going well. So we are looking at other options to let SQL make the copy.
The primary database is on a Win12R2 with SQL 12 or 14, a 2 node A/P failover cluster.
The read only copy will be on a Win12R2 with SQL 12 or 14. It is not a requirement to fail over to the read only copy if the primary should go down.
What would best the approach to accomplish the end result?
View 3 Replies
View Related
Jan 12, 2015
I did not worked on AVG in sql 2012, what are the possible errors and how to resolve in always on in sql 2012 .
View 1 Replies
View Related
Jan 18, 2015
I have 10 databases which are configured as principal in mirroring I need to failover all the databases as part of failover , instead of writing query each database as parner failover, is an script which will generate the databases as principal to failover ?
View 3 Replies
View Related
Feb 18, 2015
How to check the delay in between replicas in AG?
View 3 Replies
View Related
Feb 26, 2015
my 4 GB .OST file is corrupted and i am not able to access my mails and contacts.
View 2 Replies
View Related
Apr 7, 2015
I got query from sysproccesses and the result for one spid is : SQLAgent - TSQL JobStep (Job 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61 : Step 1
Which job has this code : 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61
View 1 Replies
View Related
May 28, 2015
After installing SSMS on some computers - the only way we can get SSMS to run correctly is to run it as the administrator. Is there a way where you don't have to do that? These end users are logging as themselves and have accounts in SQL Server all set up - but SSMS will only launch for them if we right click and select "run as administrator".After doing some digging - it seems that this is a common problem out there.
View 3 Replies
View Related
Jun 19, 2015
Have a SQL 2014 install and cannot for the life of me get the maintenance plan to remove old backups. I've tried everything. Rights to the folder where the backups are stored are adequate, extension set in the clean up task is as it should be, etc. Log shows the job ran successfully. Running the command manually shows successful completion, but backups are still not removed.
View 9 Replies
View Related
Jul 29, 2015
when execute the restore log command, in the messages window it shows how many seconds the restore takes, at the meantime, on the status bar, it also shows the seconds the command takes.
Two values are different and could be very different, please see below examples , restoring takes 1.8 seconds, but in total the command takes 4 seconds to complete, the other one is 8.1 seconds and 12 seconds.
What does SQL Server or Windows do after the restoring?
pic a:
pic b:
I did a xperf, I can see after the restoring is completed, sql server did garbage collect and log write, which just run very quickly, but storage is busy on reading the log file for nearly 2.2 seconds( 4-1.8), and 4 seconds ( 12-8.1) .
pic 1:
pic 2:
see pic 1 above, from 13 to 17, the restore operation is finished, but the storage jump to 100% active to do some reads, only reads no writes. zoom that period shows pic 2, it read 4096 (I don't know the unit size) for about 4 seconds, what does this do?
Data file, log file, backup file are no different drives, but all local drive, the interesting point is the read jumped after restoring, I tested it on different server, same result...
View 1 Replies
View Related
Aug 9, 2015
I've got an old version of SQL Server 2008 R2 Developer Edition on an old PC which is failing. I've got a new PC and have put SQL Server 2014 Developer Edition onto it. Now before the old machine completely dies, I've gotten into SSMS on the old machine and did a backup of the databases I want to save. I've moved the .BAK files to where I could get to them from SSMS on the new machine. I've gotten into SSMS and tried to do a restore the database to my new machine. However I'm getting an error that does not make any sense to me.
The database I'm I've backed up is named JobSearch. When I backed it up, that was the only database I had selected. Like I said I copied the .BAK to the new machine. Got into SSMS, told it that I wanted to restore the JobSearch database, telling it where I wanted to put it, and it then immediately fails with a:
"Restore of database 'JobSearch' failed. System.Data.SqlClient.SqlError: Logical file 'VideoLibrary_Data' is not part of the database 'JobSearch'. Use RESTORE FILEISTONLY to list the logical file names."
Well of course VideoLibrary isn't "the logical file". But neither did I select VideoLibrary (which is a database I also want to move, but I'm doing one at a time). So what in heck is going on here? Why is it complaining about a database I haven't even selected to back up? Why, when I check everything on the old machine, it's backing up JobSearch, but on the new machine it sees VideoLibrary?
View 6 Replies
View Related
Aug 24, 2015
I am new in SQL Server, What to check ,what action do i need to take while adding a new column to a table.
View 5 Replies
View Related
Oct 6, 2015
Message: Executed as user: NT AUTHORITYSYSTEM. The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases [SQLSTATE 42000] (Error 9002). The step failed in my sql server agent job i have the above error, this type of errors i got some of multiple jobs.
View 9 Replies
View Related
Nov 7, 2015
A log file size of a production database has been increase from 4gb to 150 gb initial size.Now i want to find when it will grow & how much it grow & which transaction is responsible for this.
View 6 Replies
View Related
Dec 3, 2013
We have applications connected to SQL using windows authentication. While having connection with Application user can also access to Database instance on the same time as well. We need to limit the access of user outside application.
View 6 Replies
View Related
Dec 4, 2013
And have chosen the destination - unstructered (flat) file. But the wizard proposes to export only one table (dbo.Acocount) and all the others from the list are not exported. How can I export ALL the data into one file.I need to do this to edit the syntax in the editor and then import this data and database structure into Postgresql
View 4 Replies
View Related