SQL Server Admin 2014 :: Correcting Server Connection In Maintenance Plans?
Aug 11, 2015
In SQL 2008 R2, if we clone an environment including SQL server, the maintenance plans retain a connection string to the source/original server they got cloned from and are not editable. But, I was able to use a work around by editing them in BIDS and saving them back on the server. But now with 2014, I am facing two issues:
1.I still can edit the package to correct the server connection, with SSDT; but the option to save back to the server is not available any longer!
2.I used to be able to see all my plans under SSIS in 2008 R2 but not in 2014 now. Although, they are listed in SSMS!
View 1 Replies
ADVERTISEMENT
Sep 13, 2014
I've been fixing some issues lately where weekly maintenance has been causing logs to grow and filling disks.
Is there any rule of thumb for allocating log space for doing reorgs and rebuilds in a worst case scenario? I'm thinking 3x the largest database size?
I've been watching them run on databases in the range of 50GB where the logs are growing well over that for rebuilds or even reorgs. Once you have a few databases like this on a server, you can suddenly eat through a lot of disk space just for holding logs during maintenance.
View 3 Replies
View Related
Jul 9, 2015
I was trying to configure maintenance plan to take nightly full database backup and Log backup. I was trying to configure it like in attached file. Any links that i can follow and configure as in attached file.
View 7 Replies
View Related
Jul 2, 2014
I am looking for a table where Maintenance Clean Up Task configuration is stored. For example, Delete file older than the following - which is 2 days. Which table can I retrieve the setting in msdb ?
View 5 Replies
View Related
May 14, 2015
I need to do testing on capturing connection coming from outside using Profiler. Basically I need to do something from other SQL servers connecting to this SQL server and test if it is captured by profiler.
View 4 Replies
View Related
May 12, 2015
Is it possible to make window authentication using Connection String.
Like
Data Source="Remote Host"; User ID="user1"; Password="Password"
Integrated Security=SSPI'
user1 have rights on SQL server.
Is it possible user2 logged in on different machine can access SQL server.
user2 does not have rights on SQL Server.
View 3 Replies
View Related
May 9, 2015
I configured a database mirroring on SQL server 2008 R2 on test environment. However It was not working, after some time. I deleted the mirroring configuration and also deleted database on both primary and mirror instance.
few days later I notices, On Primary, Continuous error events logged with message "database mirroring attempt by user 'domainservice account' failed with error 'connection handshake failed, 'domainservice account' does not have permission on the endpoint state 84.
I want to get rid of this message.
View 2 Replies
View Related
Dec 9, 2014
we have roughly 22 people connected to one database. But after a while, their applications begin to drag due to in and out communication with the server. When i check the active connections on the sql server, some times i see 157 active connections, please how to i set a timeout or connection interval close, so as reduce the heavy load being put on the server. Or how can i automatically close connections when they get higher than 50 connections.
This settings should be sql server 2008 related.
View 5 Replies
View Related
Jan 30, 2015
I am trying to create a logon trigger. As I am testing this, I discovered that each time I do a connection, I get 19 rows, inserted into my audit table. I ran profiler, and I see it is going through the logon trigger multiple times, for a single connection. So, what am I doing wrong? The code is fairly simplistic, and the profiler doesn't give a clue, as to what is going on. When I look at the output, I see the spid for the first couple of connections are different, then a spid, that is different from those 2 is in the next 17 rows. But, when I do an sp_who2, that spid does not exist.
This issue was noticed on a 2012 version, that I was first testing on, then had the same issue on a 2008 R2. I am currently testing on a 2014 version, that is doing the same thing. Is the logon trigger itself, firing, and causing this?
I also tried using the After Logon option, and got the same issue.
Here is the code:
CREATE TRIGGER LogonAuditTrigger
ON ALL SERVER WITH EXECUTE AS 'sa'
FOR LOGON
AS
BEGIN
DECLARE @Body NVARCHAR(2000),
[code]....
View 0 Replies
View Related
Feb 18, 2000
A year ago one of our SQL Server 6.5 servers was upgraded
to SQL Server 7.0 sp1. My compatibility level still shows
6.5, however. The SQLAgent has been using the 'localsystem'
account up until earlier this week. I changed the login
to be a domain account with System Administrator
permissions and removed the SA permissions from the
BuiltinAdministrator group. (My ultimate goal is to limit
the access NT Administrators have within my SQL databases.) All of my scheduled jobs run without error except the maintenance plans. (All
jobs have an owner of sa.)
The errors that I receive are permission errors-not being able
to get into tables on the MSDB database. However, if I open
Query Analyzer with the SQLAgent domain account and perform
a select on one of the tables in MSDB, it is successful. If I give
the BuiltinAdministrator account the SA permissions again
while still keeping the SQLAgent using the new domain account,
the maintenance jobs succeed.
Is this an upgrade problem since I do have other SQL 7.0 servers
that don't have this problem? How can I correct this?
Thank you!
Toni
View 1 Replies
View Related
Mar 7, 2008
I am trying to set up a maintenance plan is SQL Server. I set one up to query one of my very small tables for testing purposes. I made sure that I have the server entered in correctly and also verified that I needed to make sure that I have both TCP/IP and Named Pipes both enabled. However, everytime I set something up and try to execute it. The plans ends up failing. This isn't a hard process but something else isn't setup that needs to be. Does anyone have any ideas pertaining to this.
Is there a special credential that needs to be setup for this?
Any help on this would be great. Thanks
View 7 Replies
View Related
Apr 21, 2006
If your principal fails and your mirror assumes the main role and it is in Full recovery mode (which it has to be in Standard edition), then the log files will grow and grow until a transaction backup and shrink is executed.
I have maintenance plans running daily (and hourly for transaction log backup/shrink) on my principal, but nothing on my mirror.
Do I need to set up the same maintenance plans on my mirror server???
Thanks
Ed
View 19 Replies
View Related
Feb 21, 2008
Can anyone please provide me with some Best Practises for setting up Maintenance plans? IE what order should things be done in? What should be done daily, weekly, monthly, yearly... I am attempting to setup a new server and I am now 100% sure I have the maintenance plan setup correctly... expecially when I attempted to run it last night it and ran for over 8 hours and still didn't do the backup's yet. I had to reboot the server this morning to make it stop using 100% of the CPU. So please any help would be wonderful.
Regards,
Billy S.
View 1 Replies
View Related
Aug 10, 2007
I've seen a few threads on this which seem to suppose the problem is on Express edition rather than Standard edition. Not so here.
This is definitely Standard edition, SP3 as seen by running
SELECT CONVERT(char(20), SERVERPROPERTY('Edition'))
SELECT CONVERT(char(20), SERVERPROPERTY('ProductLevel'))
In SSMS
Under the Management folder there is no "Maintenance Plans" folder.
There IS a "Maintenance Plans" folder under the Legacy Folder.
I have another instance which is Standard and SP1 which looks just fine.
View 9 Replies
View Related
Nov 18, 2007
I have a SQL Server 2005 x64 bit with SP2 applied and patched to KB934458-x64-ENU (9.0.3054)
I am unable to create a maintenance plan via Management Studio or save a plan in Management Studio using the wizard.
If I just try and create a new maintenance plan, then I get the following problem:
"An OLE DB error 0x80004005 (Login timeout expired) occurred while enumerating packages. A SQL statement was issued and failed."
If I try and create any maintenance plan via the wizard, I get the following problem:
"The SaveToSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued has failed."
I've doen a bit of digging on this and had initially thought it was related to the fact that I have two instances installed on 1 server. I've since updated the MsDtsSrvr.ini.xml file to point at both instances, as I thought that might have been causing the problem. That hasn't helped at all. Edited example of xml file is below:
<?xml version="1.0" encoding="utf-8"?><DtsServiceConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <StopExecutingPackagesOnShutdown>true</StopExecutingPackagesOnShutdown> <TopLevelFolders> <Folder xsi:type="SqlServerFolder"> <Name>MSDB SQL Server Instance 1</Name> <ServerName>ServerNameInstanceName1</ServerName> </Folder> <Name>MSDB Server Instance 2</Name> <ServerName>ServerNameInstanceName2</ServerName> </Folder> <Folder xsi:type="FileSystemFolder"> <Name>File System</Name> <StorePath>..Packages</StorePath> </Folder> </TopLevelFolders> </DtsServiceConfiguration>
Any suggestions would be most welcome!
View 4 Replies
View Related
Aug 27, 2015
I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
View 0 Replies
View Related
Aug 19, 2015
I often use profiler as one tool to identify bad plans. The reads column gives me a good indication of excessive IO to dig into and correct if necessary. I often use it with Showplan so I can see what a query does, replicate it and fix it.
However I have just lost some faith in it. I am looking at a poorly performing query joining five tables. A parallel plan has been generated and one table is being scanned (in parallel) due to a missing index. This table had in excess of 4 million rows in it. The rest hitd indexes well. However the entire query generates ONLY 12 READS.
Once corrected, a single processor plan is used. This looks really efficient and uses 120 reads. That looks the right figure to me.
Clearly 12 reads is wrong. Does the profiler only display one thread of a parallel plan perhaps? Or something else?
View 1 Replies
View Related
Sep 3, 2014
I am asking about a virtual IP for SQL Server, is there a way we can assign a different IP to SQL Server other than the server's(host) IP address? like the same what we do in a clustered env.
View 3 Replies
View Related
Dec 5, 2014
I've recently started working with a public sector organisation who have 4 clustered sql instances that has 80% of it's db mirrored.
Looking at the transaction log - it seems that a transaction log backup is a good idea as the log is 4x larger than the data file.But I'm not allowed access to the physical server to check onto which drive I can create the trn. No RDP, no vmware - let's be honest I'm not even allowed to launch cmd line Also the Server Manager informs me "We will need to carefully look at database backups if you guys want to start doing these backups on box, as that will break our off box backup routine (it will screw the transaction chain)."
I don't understand how backing up the transaction log could break the "transaction chain"?
View 9 Replies
View Related
Jan 25, 2015
We are trying to create some alerts in our SQL Server 2014 BI edition.Issue is that, after I chose "Type" as "SQL Server performance condition alert" nothing is listed in the "Object" list box.SQL Server event alerts are working. Issue is only with "SQL Server performance condition alert".
View 3 Replies
View Related
Feb 23, 2015
I Run All checks for Validation cluster.I get Error On Disk Lists And Validation failed.With This error : Failed to prepare storage for testing on node "server name" The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.
View 2 Replies
View Related
Apr 23, 2015
We recently had a problem with DB Mail. SQL jobs that sends an email succeeded but the email in the job fail to sent. There was a problem with the email server. The error is included. We fixed the problem with the email server. How can I get an alert when a DB Mail email fails send?
Date4/23/2015 10:01:06 AM
LogDatabase Mail (Database Mail Log)
Log ID5907
Process ID13204
Mail Item ID5702
Last Modified4/23/2015 10:01:06 AM
Last Modified Bysa
Message
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2015-04-23T10:01:06). Exception Message: Cannot send mails to mail server. (Insufficient system storage. The server response was: 4.3.1 Unable to accept message because the server is out of disk space.).
)
View 2 Replies
View Related
Sep 11, 2015
We have oracle linked server created on one of the sql server 2008 standard , we are fetching data from oracle and updating some records in sql server . Previously its working fine but we are suddenly facing below issue.
Below error occurred during process .
OLE DB provider "OraOLEDB.Oracle" for linked server "<linkedservername>" returned message "".
Msg 7346, Level 16, State 2, Line 1
Cannot get the data of the row from the OLE DB provider "OraOLEDB.Oracle" for linked server "<linked server name>".
View 7 Replies
View Related
Jul 24, 2014
Is it possible to have Analysis Services in both modes or are they mutually exclusive?I have a machine setup with Multidimensional AS and would like to know if it's possible to add a Service in Tabular mode.
View 2 Replies
View Related
Nov 25, 2014
I want two write a small script to determine which is the currently active (primary) server in the AG.
Right now, I see that using SELECT * FROM SYS.dm_hadr_availability_replica_states I can determine the role. However, when the server goes down and switches to the secondary node, I don't believe that the role changes (or does it?). How do I determine which is the active node?
View 9 Replies
View Related
Mar 30, 2015
We are consolidating some old SQL server-environments from 'OLD' to 'NEW' and one of our vendors is protesting on behalve of the collation we use on our 'NEW' SQL server.
Our old server (SQL 2005) contains databases with collation SQL_Latin1_General_CP1_CI_AS
Our new server (2014) has the standard collation Latin1_General_CI_AS
Both collations have CI and AS
From experience I know different databases can reside next to eachother on the same Instance.
The only problem could be ('could be !!') the use of TempDB with a high volume of transaction to be executured in TempDB and choosing for Snapshot Isolation Level ....
The application the databases belong to is very static, hardly updated, and questioned only several time per hour (so no TempDB issue I guess).
using different databases using a different collation running on the same instance?
View 5 Replies
View Related
Apr 14, 2015
I need to migrate Reports from a SQL Server 2008 R2 Server to SQL Server 2014 Reporting Services.
Reporting Services is installed on one Server and the Reporting Services is installed on another Server.
On the existing Server the Encryption was never backed up.
What do I do with the key?
The following article provides some good information but it does not identify what to do with the Destination URL.
It mentions to download the files but it does not specify how to identify the path and it does not state where to upload them.
Do you restore the existing Reporting Services Databases to the new Server?
[URL] .....
View 2 Replies
View Related
Aug 5, 2015
I need some clarification about adding file in to mirrored dataabse in primary server without downtime and breaking the mirror server.
In our environment we are using monutdisks in both the servers. in primary for ex we have F drive for data files under mount disk 3 in mirror server also we have same drive but in mount drive2.
As per my knowledge if it is same drives we can add the ndf files in the primary that will reflect on mirror. but in current situation i am confusing about mount points with different names.
View 3 Replies
View Related
Sep 9, 2015
I'm looking for a way to list the target servers associated with a master server. The reason is that we're moving to another master server, and I'd prefer not to move the targets manually.
I've got most of the T-SQL already (sp_msx_enlist, sp_add_jobserver), but I'd like a scripted solution instead of a wizard.
View 2 Replies
View Related
Oct 6, 2015
I am setting up SQL 2014 always on. I was able to set up the replicas between 2 servers in the same subnet.Their IP addresses are say like this:
100.20.200.200
100.20.200.201
When I am trying to introduce another node into the cluster which has IP address like 100.10.101.102, I am getting an error that the server isn't reachable.
View 5 Replies
View Related
Jun 3, 2015
As CM doesn't support SQL authentication, and if access SQL Server on another domain with no trust, we cannot use Windows authentication as well.
CM only supports Windows authentication, but for large organizations which will have multi domains.
I am thinking if there is no proper way/tool, we will develop one then.
View 0 Replies
View Related
Sep 8, 2015
I use following trigger to stop user "smith" if he try to connect through SSMS to My Server:
create TRIGGER [trg_connection_MyServer]
ON ALL SERVER WITH EXECUTE AS 'Smith'
FOR LOGON
AS
BEGIN
IF ORIGINAL_LOGIN()= 'Smith'
begin
if exists (SELECT 1 FROM sys.dm_exec_sessions
WHERE (program_name like 'Microsoft SQL Server%' and original_login_name = 'Smith') )
ROLLBACK;
end
I want to log this information or send emal incase, this user try to connect through SSMS, so that I can catch it. How can I do this, if I use insert command it rollsback everything and I can't do any activity.
View 8 Replies
View Related
Feb 10, 2015
I have an issue to restore an encrypted backup via GUI.I can restore an encrypted backup on another instance using t-sql command, but cannot do the same using the GUI of sql server 2014. The message error is: No backupset selected to be restored.I have restored the master key from the instance where the encrypted backup was created on the instance where I want to restore the encrypted backup, then restored the certificate. I managed to open the master key. I have the following versions:
On the instance where the encrypted backup is taken:
Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
On the instance where I'm trying to restore the bakcup via GUI:
Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: )
View 9 Replies
View Related
