SQL Server Admin 2014 :: Database Backups And AlwaysOn Availability Groups
Oct 16, 2014
This is my first deployment of an always on availability group for SQL 2014 and I'm trying to get my custom backup procedure to handle all databases appropriately depending on the primary group. Basiscally I want the system databases and all databases that don't participate in the availability group to be backed up on both nodes and those that do participate backed up ONLY on the primary server. I've looked at the sys.fn_hadr_backup_is_preferred_replica funcation, but would like to only have to test for a single databases existance in the availability group. If the one database is in the group, only backup the system databases and those that don't participate, otherwise backup everydatabase. This would be the case for both full backups and transaction logs.
View 1 Replies
ADVERTISEMENT
Apr 2, 2015
The MSDN doc makes it sound like after a failover of the primary, the CDC data won't "keep working" on the secondary unless you "To allow the logreader to proceed further and still have disaster recovery capacity, remove the original primary replica from the availability group using ALTER AVAILABITY GROUP <group_name> REMOVE REPLICA. Then add a new secondary replica to the availability group."
We have a few CDC tracked tables that we use and the general idea of AlwaysOn I thought was to minimize all the overhead and let things "just work" so your apps just connect and the listener re-routes everything where it needs to go.
It looks like to get this working properly an automated job /trigger would have to wait for a failover event and then kick off tasks to remove and re-add the replica and perhaps start up the CDC job on the secondary?
View 1 Replies
View Related
Sep 15, 2015
I am planning to have AlwaysON Availability Groups setup between Server 1 and Server 2
Server 1 -->Publisher-->2014 SQL Enterprise edition-->Windows Std 2012 --> Always on Primary Replica
Server 2 -->Publisher(when DR happens)-->2014 SQL Enterprise edition-->Windows Std 2012 --> Secondary Primary
Server 4 as Subscriber
Server X as Remote Distributor ..
If i create Publications on Server1 (primary replica) to subscriber 4 servcer, will the publication be created automatically in Secondary Replica Server2 ? or do i have to create manullay using GUI/T Sql on Both Servers?
View 1 Replies
View Related
Jun 17, 2015
What I asked for: Three Windows Server 2012 R2 machines with independent storage running a SQL Server 2014 AlwaysOn Availability Group. DB1 would be the primary, DB2 would be a synchronous replica, and DB3 would be a remote asynchronous replica.
What I was given: a two-node Windows Server 2012 R2 WSFC to run SQL Server 2014 Enterprise with shared storage and a third (remote) Windows Server 2012 R2 machine with independent storage, also with SQL Server 2014 Enterprise, to host an AlwaysOn Availability Groups asynchronous replica.
DB1 and DB2 (as Cluster1) share an E: drive. The remote DB3 has its own E: drive. Initially, DB3’s E: drive was claimed as a cluster resource and I couldn’t even see it. I’ve had several ugly days trying to make this work and have temporarily given up, installing DB3 as a standalone SQL Server that is no longer part of the WSFC and pointing everything towards that (it was originally a third node in the WSFC).
Is it possible to create an AlwaysOn Availability Group with nested clusters (i.e. create the AOAG with Cluster1 and DB3 and somehow ignore the individual nodes that comprise Cluster1)?
View 6 Replies
View Related
Nov 3, 2015
We are looking at going down the High Availability Always On route. However we have some concerns around the lack of support for MSDTC. In short we are concerned that developers may introduce functionality either on purpose or by mistake that uses the or escalates the Query’s to the MSTDTC. As this could result in database splitting.
Understand that this will be a moot point in SQL 2016 but for 20122014 is it possible to disable the MSDTC to protect against this and run High Availability Always On. ? Does it just need to be disabled on the SQL Server or does it need to be done on the application server ?
View 0 Replies
View Related
May 21, 2014
how does security works between availability groups.
ex if i create an object and grant permissions to a user will that be replicated to secondary replica .
View 4 Replies
View Related
Aug 28, 2014
We are having a conversation at work and the subject of load balancing with SQL came up. Right now we are running SQL Server 2014 on four (4) machines. I am using a AlwaysOn with Availability Groups (AG). Now I know that we can scale out the reading in AG by allowing the secondary serves to receive reads.
Is there a way to be able to do this with writes? Can I have in essences 2 masters that some how reconcile with each other? We are expecting a huge amount of writes in the near future and we need a way for SQL to handle the amount of traffic we are expecting with out any issues.
I explored the possibility of Peer - to - Peer replication; however, it seems that it would be more work if we are constantly making updates to the database scheme.
View 2 Replies
View Related
Feb 11, 2015
we currently use Backup Scripts from Ola Hallengren, It Says Full (non copy-only) and differential backups are performed on the primary replica. Full(Copy-only) backups and transaction log backups are performed on the preferred replica.
we currently do FULL(COPY_ONLY) Backup everyday and LOG Backups for every 15 min, is there any performance benefit on running the FULL (non copy-only) on the preferred replica .
View 3 Replies
View Related
Sep 1, 2015
We have a server A and a server B setup with SQL2014 High Availability - working fine.
I need to add an additional listener to our new DR site.
What is the best way to do this without impacting production - can I just add the additional replica from nodea as a secondary replica?
View 1 Replies
View Related
Nov 25, 2014
I want two write a small script to determine which is the currently active (primary) server in the AG.
Right now, I see that using SELECT * FROM SYS.dm_hadr_availability_replica_states I can determine the role. However, when the server goes down and switches to the secondary node, I don't believe that the role changes (or does it?). How do I determine which is the active node?
View 9 Replies
View Related
Dec 1, 2015
I have configured replication between Always ON Availability Groups (Listener) (PUBLISHER), remote distributor to XYZ SUBSCRIBER...with above link ...
Now, I want to know how to replicate Data from XYZ SERVER a PUBLISHER to Always ON Availability Groups (Listener) (SUBSCRIBER)? Distributor Database being on XYZEX:
XYZ SQL SERVER as PUBLISHER, and DISTRIBUTOR
to
Always ON Availability Groups (Listener) SUBSCRIBER...
View 3 Replies
View Related
Feb 1, 2015
We have a 2 node clustered instance(SQL 2014) with 26 databases and we would like to enable alwayson for one of the databases for reporting (only one secondary and do not need high availability setup). I'm thinking if the reporting application/queries can explicitly connect to the secondary database(Instance namedatabase name) without using a listener and setup the secondary in asynchronous commit mode. Read about the REDO thread blocking due to reporting workload. How does this affect if I implement the secondary in this way.
View 3 Replies
View Related
Jun 19, 2015
How to run the profiler on always on read only database to troubleshoot an ssrs issue ?
View 0 Replies
View Related
Sep 14, 2015
I am planning to have AlwaysON Availability Groups setup between Server 1 and Server 2
Server 1 -->Publisher-->2014 SQL Enterprise edition-->Windows Std 2012 --> Always on Primary Replica
Server 2 -->Publisher(when DR happens)-->2014 SQL Enterprise edition-->Windows Std 2012 --> Secondary Primary
Server 4 as Subscriber
Server X as Remote Distributor ..
as of now , In the event of Disaster happens on Node 1 i will have to manage JOBS on Node 2 (backups, Maintenance, replication, day-day other Jobs)..Is there a way i can call all jobs to run from a remote server which executes on Active NODE(which ever is active)? so that in the event of disaster happens on node1, when node 2 becomes online and i don't have to do anything with SQL Agent or jobs on Node 2?
View 4 Replies
View Related
Oct 23, 2015
We had to failover our primary db server for maintenance to our secondary replica. The primary was rebooted during maintenance. We failed back after the maintenance and one of the databases is not synchronizing.
I checked sys.dm_hadr_database_replica_states, and it is showing that it is INITIALIZING.
It has been in this state for more than 45 mins now. The last_sent_time, last_received_time, last_hardened_time and last-redone_time are all stuck with a time stamp 45 mins ago.
They haven't changed. How do i resume this database and bring it back in sync?
I tried suspending and resuming the data movement, but hasn't worked.
View 6 Replies
View Related
Jan 27, 2015
I Create an availibility Group with a primary and a secondary. (For test)
Then run Planed Failover.
Switched to secondary. That's ok.
After that I update some tables on secondary (That now is primary)
I Run Again Planed Failover on server 2.
Switched. OK
But primary database Get (Not synchronizing) Status.
And in primary I don't have that updates.
How to sync these databases and exit from Not synchronizing.
View 5 Replies
View Related
Jul 9, 2015
I am setting up a 3 node cluster as part of an availability group.Initially I tested failover between nodes using SQL Management Studio and everything failed over successfully when I stopped a node, and I was still able to write queries. I started to test with an application which connects using an SQL user and whenever I would switch nodes, I would get login failed. I believe the cause of this issue is because the server logins SID's which are tied to the database are different than the server logins on the other nodes which resulted in login failed.how can I ensure that the server logins SID's are the same between nodes? Is there a way of copying this over or how is this supposed to be done? I read a little about contained databases where I could just set the login on the database itself vs. creating a server login but I would rather not go down that route.
View 4 Replies
View Related
Sep 16, 2015
Can we set up always on availability groups in server 2012 standard edition.
View 3 Replies
View Related
Feb 13, 2014
I have four instances and each instance have its own Availability Group with its own listener.
Would like to know if you can have one listener for multiple Availability groups?
View 2 Replies
View Related
Apr 28, 2014
We had 3 Availability Groups set up in SQL 2012 last year but they were poorly named so I am just looking to rename them but there doesn't seem to be any command for it that I can find.Can they not be renamed once created? I guess I could just create new ones and move the DB's into them but just thought I would check!
View 1 Replies
View Related
Sep 15, 2015
We have multiple SQL 2012 SQL servers setup in an alwaysOn availability groups. Where should we schedule the re-index? We have Server1 as the primary and 2 secondaries Server2 and Server3. Are their any tricks to have it run on which ever one is the primary?
View 1 Replies
View Related
Dec 1, 2014
We are currently using 2008 environment. We do have an SSIS Package running. The package used to run everyday and take the production server full backups and restore into the another server. Then do some delete commands and do some updates in that database on that server (We have some sensitive data other than Production we have to run that scripts in any environment). After run all those delete statements another team will read the data from that database.
We are planning to migrate to 2014 and set up always on and use the replica as the source. In this case how the package will work?
How to change that SSIS package. With the 2014 always on we are directly reading the data there is no backups to restore then how to run the delete statements?
View 0 Replies
View Related
Oct 19, 2015
I'm doing a certification process using AlwaysOn, and was using the link below, and on the lower 90 hotfix, and instead of downloading one by one, and then upgrade one by one updates, is there any way to make it more faster or practical, or unfortunately have to do this one by one, so the download as the update? This rollup contains the latest version of the Windows system files that are updated after the release of SP1. URL...
View 2 Replies
View Related
Jan 12, 2015
I did not worked on AVG in sql 2012, what are the possible errors and how to resolve in always on in sql 2012 .
View 1 Replies
View Related
Jul 3, 2015
We have 4 servers : Server 1 , Server 2 and HA , DR servers.
I designed 2 Plans to get HA support for my databases .
Which of them are better , And is there any problem in my design ?
View 4 Replies
View Related
Aug 18, 2015
I am trying to create a job that runs against my High Availability listener server.
It is a fairly simple SQL statement in the job - execute tsql.
When I try and run the job I get the error:
Executed as user: NT SERVICESQLAgent$SQL2014A. The target database ('BB_Prod') is in an availability group and is currently accessible for connections when the application intent is set to read only. For more information about application intent, see SQL Server Books Online. [SQLSTATE 42000] (Error 978). The step failed.
I thought there was a way to run a select statement as a job against the listener? The tsql step is only a select.
Is there a way to pass in the application intent = readonly as part of my SQL statement?
View 2 Replies
View Related
May 8, 2015
I got 5 SQL Servers 2008R2 (2x CPUs with 96-384Gb of RAM) with total 1500DBs and around 10Tb of allocated data. Now
I am forced to upgrade to 2012 and 2014, but the old hardware is overkill.
Is it possible to consolidate this to a large SQL AlwaysOn cluster?
We pros/cons could it be to have 2 or 4 nodes?
2 or 4 sockets servers?
My goal was to use ~20 cores Enterprise license on active server.
View 1 Replies
View Related
Jun 17, 2015
I would like to setup replica for one of the databases for reporting. The current environment is a 2 node cluster(active/passive). I would like to add a 3rd node that can server as a secondary replica. The secondary replica will be on asynchronous commit mode.
The database that needs to have alwayson setup has column level encryption enabled.
Other Questions,
* Do I need to backup and restore the service master key on secondary server in order to have the column level encryption to work on secondary server?
* What would be preferred Quorum settings?
* What is the setting for 'readable secondary' for primary and replica db?
* What should be the setting for 'Connections in Primary Role' for primary and replica db?
* We are trying to setup without a Listner. Do I need to setup AG Listener? Can the application exclusively use the [secondary instance name].[replica DB name] without a listener?
View 4 Replies
View Related
Jul 18, 2015
I have a database that is part of AlwaysOn that is filling up the transaction log drive even though I have a daily full backup and transaction logs set for every 2 hours. The backups are going from both the primary and secondary replica backuping up to the shared disk and I have the backup preferences set to the primary.
When I try to shrink the log I get 'The transaction log for database 'DB' is full due to 'LOG_BACKUP''. I have to manually backup the trans log and then shrink, why the maintenance plan backups aren't doing this even though they are "working".
View 9 Replies
View Related
Oct 12, 2015
how to shrink log files in SQL 2014 alwaysOn ?
View 1 Replies
View Related
Oct 25, 2015
We had a big issue today during maintenance work in our SQL environment.
So our environment:
- 2x SQL Server 2014 Enterprise on Windows Server 2012 R2 (SRV1 and SRV2)
-- Both Hyper-V VMs on different Hosts
-- Both configured to an Windows Failover Cluster and AlwaysOn Availability Group (AG1)
-- AG Listener: AG1_lis
-- No shared storage (each Hyper-V Host has its own local storage)
-- Asynchronous Mode
-- SRV1 is primary, SRV2 is secondary SQL node
What happened?
- Shutting down Windows on SRV2 due hardware maintenance
- Cluster goes offline, AG1 goes offline
-- Error message: "Stopped listening on virtual network name 'AG1_lis'."
-- Error message: "The availability group database "DatabaseXY" is changing roles from "PRIMARY" to "RESOLVING" because the mirroring session or availability group failed over due to role synchronization."
Results?
- AG1_lis wasn't available for our applications and they stopped working properly because database connection was lost!
I think, I HOPE, this is not the normale behaviour when one node is shutting down (especially the secondary node!)
View 1 Replies
View Related
Nov 10, 2014
Is there any way to trigger an event (ie. call a procedure/job/etc.) when/if an AG fails over?
Not looking to use agent alerts.
View 0 Replies
View Related
Dec 24, 2014
Recently after turning on trace I restarted the sql services on a box which is configured for automatic failover availability groups. The ag has not failed over to other node. The other node was in resolving state. When the restarted server is back, the AG went back to that server. I checked the sys.availability groups field for failover property failure condition level, it's set to 1 which means service restarts should initiate the failover.
View 3 Replies
View Related
