Same SQL Server DB engine (2012), connected with two different clients (2008 and 2012). When I check objects for performance condition alert, 2008 client shows the objects name with leading "SQL Server".But 2012 client displays just the object name and NOT prefixed with "SQL Server".we have automated alerts creation, so it fails depends on the client version.
View 0 RepliesSQL Server 2014 BI edition.
select * from sys.dm_os_performance_counters returns the object names prefixed with "SQLServer:" (e.g. SQLServer:Databases)
It was expected as in other editions also. Issue is that when we try to crate "SQLServer Performance Condition alert", object names in "Object" list comes without the prefix "SQLServer:" (e.g. Databases). Please see the attached snapshots.
We are trying to create some alerts in our SQL Server 2014 BI edition.Issue is that, after I chose "Type" as "SQL Server performance condition alert" nothing is listed in the "Object" list box.SQL Server event alerts are working. Issue is only with "SQL Server performance condition alert".
View 3 Replies View RelatedWe recently had a problem with DB Mail. SQL jobs that sends an email succeeded but the email in the job fail to sent. There was a problem with the email server. The error is included. We fixed the problem with the email server. How can I get an alert when a DB Mail email fails send?
Date4/23/2015 10:01:06 AM
LogDatabase Mail (Database Mail Log)
Log ID5907
Process ID13204
Mail Item ID5702
Last Modified4/23/2015 10:01:06 AM
Last Modified Bysa
Message
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2015-04-23T10:01:06). Exception Message: Cannot send mails to mail server. (Insufficient system storage. The server response was: 4.3.1 Unable to accept message because the server is out of disk space.).
)
I am having an issue in determining the correct size of a table.
I have a tableA in some DB on transaction server (Enterprise Edition), this table is being replicated in reporting server DB (Standard edition).
When I check the space used by this table in both the databases i see noticeable difference.
I am using EXEC sp_spaceused 'tableA' to determine the space.
Transaction Server
------------------------------------------------------------------------------
name rows reserveddata index_size unused
TableA1439999 695416 KB507048 KB182912 KB 5456 KB
Reporting Server
-------------------------------------------------------------------------------
name rows reserveddata index_size unused
TableA1439999 656904 KB483664 KB172680 KB 560 KB
So I wanted to know what could be the possible reasons for this difference ?
How can we deny an Object select Permission which have Sysadmin role.
View 2 Replies View RelatedI want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
I have a Table "Customer" which contain a Field "CreditLimit",
Now I want a Mail alert on change of this filed with both value old credit limit value and New credit limit value.
Is its possible without trigger??
How to write a Query for multiple legal names that have the same CARE Number (same address) with difference of one Legal Name having a period in the name versus the other legal name that doesn't.
For example: Looking for cases of two of the same legal name one set off by period
All Season Equipment Ltd.
All Season Equipment Ltd
West End Housing, Inc.
West End Housing, Inc
Wellings, Norman L.
Wellings, Norman L
North Texas Boats, LLC
North Texas Boats, L.L.C.
Oktibbeha County Cooperative (A.A.L.)
Oktibbeha County Cooperative (AAL)
S & R Turf & Irrigation Equipment, L.L.C
S & R Turf & Irrigation Equipment, L.L.C.
Burke Equipment Company; Burke Equipment-Seaford, Inc.; Newark Kubota, Inc.
Burke Equipment Company
Burke Equipment-Seaford, Inc.
Pleasant Valley Outdoor Power, L.L.C.
Pleasant Valley Outdoor Power, LLC
J & D Lawn and Tractor Sales, Inc.
J&D Lawn & Tractor Sales, Inc"
In Management Studio, under Registered Servers, I double-click a server name (could be sql 2000 or sql 2005 server) and it apperars in "Object Explorer" where I can work with it. I click the "Save All" button in Management Studio, exit Studio, and re-start Studio. When I do, I find that all the servers I placed under "Object Explorer" are now missing and I need to go through the "double-click the registered server" ritual again. And again, and again.
What am I doing wrong here? Why don't the servers "stick" in Object Explorer?
TIA
barkingdog
P.S. I have Sql 2005 SP1 installed on my box.
I inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
I am trying to write a query to calculate the running difference between data on different dates. Below is what my table of data looks like. Basically I want to calculate the difference between the total_completed for each state and date.
DateStatesTotal_Completed
08/27/15CA 19,952
09/11/15CA 26,336
10/02/15CA 35,444
10/08/15CA 38,278
08/27/15CO2797
09/11/15CO3264
10/02/15CO4270
10/08/15CO4297
below is what I am trying to achieve:
DateStatesTotal_CompletedCompleted_Difference
08/27/15CA 19,952 0
09/11/15CA 26,336 6,384
10/02/15CA 35,444 9,108
10/08/15CA 38,278 2,834
08/27/15CO27970
09/11/15CO3264467
10/02/15CO42701,006
10/08/15CO429727
below is my code (I almost have what I need) I just can't figure out how show 0 as the completed_difference for the first Date for each state since there is no prior date to calculate against.
MRR_TOTALS_WEEK_OVER_WEEK AS
(
SELECT
T1.[Date]
,T1.States
,T2.Total_Completed
,ROW_NUMBER() OVER(PARTITION BY T1.States ORDER BY T1.States,T1.[Date]) AS ORDERING
FROM TOTAL_CHARTS T1
LEFT JOIN TOTAL_COMPLETED T2 ON T1.[Date] = T2.[Date] AND T1.States = T2.States
)
[code].....
I want to use BCP to load data from a text file.
By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.
bcp aborts if ANY of the rows contains a FK violation. No data get loaded.
So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.
I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?
If I install an instance with Windows Only authentication, and then change it to Mixed Mode, if I enable the sa login, the password has already been set. What is the default? If it's generated, how secure is it? Is the password generated? What algorithm is used for that?
View 9 Replies View RelatedMy sql databases in SQL Server 2014 has the status "suspend" as I saw in SQL Management Studio. I can't restore to serviceable condition sql databases through standard procedures. I need to restore .mdf file.
View 9 Replies View RelatedI am using a monitoring system where I can monitor a numeric SQL result assuming the result is one field and one row.I would like to do this to say monitor the free available space or percentage on say the Master database. DBCC SQLPERF gives me a few columns and results for all databases on the server.
View 2 Replies View RelatedIn our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?
View 1 Replies View RelatedIs there a way to schedule a sql job to run at different intervals
For eg:
The job should run at
7:00 Am
8:00 AM
and then at 10:00 Am
We installed the Sql 2014 in Test server.
We observed frequently
"Process 0:0:0 (0x1e10) Worker 0x00000006B6D341A0 appears to be non-yielding on Scheduler 13. Thread creation time: 12906028806348. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 13%. System Idle 84%. Interval: 70189 ms."
Is it better to run the profiler or performan counter?
What are the filters we have to select in the profiler to monitor the Sql server
I have a SQL server box running 2014 reporting services. I have another server running IIS v8.
I would like to be able to connect to the IIS site and be given the SSRS report browser.
So externally if I browse to [URL], I am presented with the report server interface, the same as if I browse to http://xxx.xxx.xxx.xxx/reports internally.
What are my options?
What is the best approach for a read only copy of a database that is ~ 1TB. The primary database is fed nightly with an ETL process. We are currently trying to duplicate the ETL to read only server but that process is not going well. So we are looking at other options to let SQL make the copy.
The primary database is on a Win12R2 with SQL 12 or 14, a 2 node A/P failover cluster.
The read only copy will be on a Win12R2 with SQL 12 or 14. It is not a requirement to fail over to the read only copy if the primary should go down.
What would best the approach to accomplish the end result?
I did not worked on AVG in sql 2012, what are the possible errors and how to resolve in always on in sql 2012 .
View 1 Replies View RelatedI have 10 databases which are configured as principal in mirroring I need to failover all the databases as part of failover , instead of writing query each database as parner failover, is an script which will generate the databases as principal to failover ?
View 3 Replies View RelatedHow to check the delay in between replicas in AG?
View 3 Replies View Relatedmy 4 GB .OST file is corrupted and i am not able to access my mails and contacts.
View 2 Replies View RelatedI got query from sysproccesses and the result for one spid is : SQLAgent - TSQL JobStep (Job 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61 : Step 1
Which job has this code : 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61
After installing SSMS on some computers - the only way we can get SSMS to run correctly is to run it as the administrator. Is there a way where you don't have to do that? These end users are logging as themselves and have accounts in SQL Server all set up - but SSMS will only launch for them if we right click and select "run as administrator".After doing some digging - it seems that this is a common problem out there.
View 3 Replies View RelatedHave a SQL 2014 install and cannot for the life of me get the maintenance plan to remove old backups. I've tried everything. Rights to the folder where the backups are stored are adequate, extension set in the clean up task is as it should be, etc. Log shows the job ran successfully. Running the command manually shows successful completion, but backups are still not removed.
View 9 Replies View Relatedwhen execute the restore log command, in the messages window it shows how many seconds the restore takes, at the meantime, on the status bar, it also shows the seconds the command takes.
Two values are different and could be very different, please see below examples , restoring takes 1.8 seconds, but in total the command takes 4 seconds to complete, the other one is 8.1 seconds and 12 seconds.
What does SQL Server or Windows do after the restoring?
pic a:
pic b:
I did a xperf, I can see after the restoring is completed, sql server did garbage collect and log write, which just run very quickly, but storage is busy on reading the log file for nearly 2.2 seconds( 4-1.8), and 4 seconds ( 12-8.1) .
pic 1:
pic 2:
see pic 1 above, from 13 to 17, the restore operation is finished, but the storage jump to 100% active to do some reads, only reads no writes. zoom that period shows pic 2, it read 4096 (I don't know the unit size) for about 4 seconds, what does this do?
Data file, log file, backup file are no different drives, but all local drive, the interesting point is the read jumped after restoring, I tested it on different server, same result...
I've got an old version of SQL Server 2008 R2 Developer Edition on an old PC which is failing. I've got a new PC and have put SQL Server 2014 Developer Edition onto it. Now before the old machine completely dies, I've gotten into SSMS on the old machine and did a backup of the databases I want to save. I've moved the .BAK files to where I could get to them from SSMS on the new machine. I've gotten into SSMS and tried to do a restore the database to my new machine. However I'm getting an error that does not make any sense to me.
The database I'm I've backed up is named JobSearch. When I backed it up, that was the only database I had selected. Like I said I copied the .BAK to the new machine. Got into SSMS, told it that I wanted to restore the JobSearch database, telling it where I wanted to put it, and it then immediately fails with a:
"Restore of database 'JobSearch' failed. System.Data.SqlClient.SqlError: Logical file 'VideoLibrary_Data' is not part of the database 'JobSearch'. Use RESTORE FILEISTONLY to list the logical file names."
Well of course VideoLibrary isn't "the logical file". But neither did I select VideoLibrary (which is a database I also want to move, but I'm doing one at a time). So what in heck is going on here? Why is it complaining about a database I haven't even selected to back up? Why, when I check everything on the old machine, it's backing up JobSearch, but on the new machine it sees VideoLibrary?
I am new in SQL Server, What to check ,what action do i need to take while adding a new column to a table.
View 5 Replies View RelatedMessage: Executed as user: NT AUTHORITYSYSTEM. The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases [SQLSTATE 42000] (Error 9002). The step failed in my sql server agent job i have the above error, this type of errors i got some of multiple jobs.
View 9 Replies View RelatedA log file size of a production database has been increase from 4gb to 150 gb initial size.Now i want to find when it will grow & how much it grow & which transaction is responsible for this.
View 6 Replies View Related