SQL Server Admin 2014 :: Disabling Database Encryption - During Or After Production Hours?
Jun 4, 2015
I have to disable newly implemented database encryption. It's a necessity unfortunately. Can I do this during production hours without much of a hit? I know I have to restart the instance after it's done. Can I expect performance impacts or other issues?
View 1 Replies
ADVERTISEMENT
Sep 3, 2014
I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
View 6 Replies
View Related
Nov 3, 2015
We are looking at going down the High Availability Always On route. However we have some concerns around the lack of support for MSDTC. In short we are concerned that developers may introduce functionality either on purpose or by mistake that uses the or escalates the Query’s to the MSTDTC. As this could result in database splitting.
Understand that this will be a moot point in SQL 2016 but for 20122014 is it possible to disable the MSDTC to protect against this and run High Availability Always On. ? Does it just need to be disabled on the SQL Server or does it need to be done on the application server ?
View 0 Replies
View Related
Apr 14, 2015
I inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
View 4 Replies
View Related
Apr 2, 2015
I have a production DB that all of a sudden it seems that any and every insert causes massive locks/blocks.
If I kill the offending spid anther spids pops up with the block/lock.!
View 7 Replies
View Related
Jun 8, 2015
I'm having problems with the following code:
--DROP MASTER KEY
--GO
USE master;
CREATE MASTER KEY
ENCRYPTION BY PASSWORD = 'Pass@word1';
GO
USE master;
[code]....
What am I missing? What do I have to do if I get in a situation where I need to back out and start over?
[URL]
View 9 Replies
View Related
Jun 17, 2015
I need to encrypt some column level data in multiple tables in SQL server 2014. I've never tried encryption in SQL server 2014. How can I achieve it?
View 4 Replies
View Related
Jun 25, 2015
I am trying to implement the column encryption on one of the tables, have used the below link as the reference and got stuck at the last step.
[URL] ....
I have completed the following steps so far.
- CREATE MASTER KEY ENCRYPTION BY PASSWORD = ‘myStrongPassword’
- CREATE CERTIFICATE MyCertificateName
WITH SUBJECT = 'A label for this certificate'
- CREATE SYMMETRIC KEY MySymmetricKeyName WITH
IDENTITY_VALUE = 'a fairly secure name',
ALGORITHM = AES_256,
[Code] .....
Example by using the function
EXEC OpenKeys
-- Encrypting
SELECT Encrypt(myColumn) FROM myTable
-- Decrypting
SELECT Decrypt(myColumn) FROM myTable
When I ran the last command :
-- Decrypting
SELECT Decrypt(myColumn) FROM myTable
I get the following error :
Msg 257, Level 16, State 3, Line 2
Implicit conversion from data type nvarchar to varbinary is not allowed. Use the CONVERT function to run this query.
Where will I use the convert function, in decrypt function or in select statement?
View 9 Replies
View Related
Dec 4, 2013
And have chosen the destination - unstructered (flat) file. But the wizard proposes to export only one table (dbo.Acocount) and all the others from the list are not exported. How can I export ALL the data into one file.I need to do this to edit the syntax in the editor and then import this data and database structure into Postgresql
View 4 Replies
View Related
Mar 14, 2014
I have two databases like each other that one is the backup of another. Each DB have 2 filegroups. I want to replace one filegroup from one db to another. How do I do this? Or how do I backup and then restore?
View 3 Replies
View Related
Nov 3, 2014
Query to show logins that don't have any permissions within the SQL instance? I'm tasked with doing some cleanup and have found some cases where the database was deleted or moved to another server but the logins that used it were not deleted. I'd like to identify them to research.
For instance a query to show logins that have no permissions in any of the existing databases would be handy. I'm thinking it would be complicated by the need to loop through all of the existing databases and then outer join it to the list of instance level logins. Going to try to write something like that but was hoping that a script already exists.
View 3 Replies
View Related
Nov 22, 2014
I have multiple SQL 2008 severs with databases. Also, 1 mirroring server in place.
Since my database count is increasing can i have only 1 mirroring server. Is there any limit of db at mirroring server. I would have approx. 150 databases.
View 4 Replies
View Related
Jan 31, 2015
I want to Replace The Big Log database with A new one ( A database with same structure).But current DB has many connection .
This is my plan :
1- Create a new database with same structure.
2- Rename current database to olddb with this code :
USE master
GO
EXEC sp_dboption CurDataBase, 'Single User', True
EXEC sp_renamedb 'CurDataBase', 'OldDataBase'
GO
3- Rename Newdb to current DB.
USE master
GO
EXEC sp_renamedb 'NewDataBase', 'CurDataBase'
is it true ? and Tsql code is ok ? (dont forget many of connection to curdatabase (that Is a log db) and loss some seconds data is not problems)
View 4 Replies
View Related
Apr 13, 2015
My database went into suspected mode. and after we had run some script, it came out from the suspected mode. but we encountered this error while opening table in database.
2009-11-02 15:46:42.90 spid51 Error: 824, Severity: 24, State: 2.
2009-11-02 15:46:42.90 spid51 SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:43686; actual 0:0). It occurred during a read of page (1:43686) in database ID 23 at offset 0x0000001554c000 in file 'H:MSSQL.SQL2008MSSQLDATAmy_db.mdf'.
Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
View 9 Replies
View Related
Apr 14, 2015
I have a job under the SQL Server Agent, which is configured to send an email notification on failure.
The job is scheduled to run every 30 minutes.
Is it somehow possible to configure it so that it only sends one email in case of subsequent failures instead of "spamming" my inbox every half hour?
View 4 Replies
View Related
May 11, 2015
I tried to copy db from server to server by sa user ( sql login) but this error raised and the copy failed
Executed as user: NT ServiceSQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 9:55:24 AM Progress: 2015-05-11 09:55:24.45 Source: 10_32_0_201_10_32_0_202_Transfer Objects Task Task just started the execution.: 0% complete End Progress Error: 2015-05-11 09:56:31.87 Code: 0x00000000 Source: 10_32_0_201_10_32_0_202_Transfer Objects Task
An error occurred while transferring data. See the inner exception for details. StackTrace: at Microsoft.SqlServer. Management. Smo. Transfer. TransferData()The Execution method succeeded, but the
[code]....
number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:55:24 AM Finished: 9:56:32 AM Elapsed: 67.892 seconds. The package execution failed. The step failed.
View 8 Replies
View Related
May 20, 2015
Is there a better way to deal with the virtual log files?...I see several approaches in dealing/decreasing the virtual log files for a database..want to know what's the best n safest approach, from the masters here?
View 9 Replies
View Related
Jun 15, 2015
in my environment I am running the SQL Server agent job.i am getting below message.
create a master key in the database or open a master key in the session before performing this operation” error
View 5 Replies
View Related
Oct 29, 2015
I have an environment with MS-SQL Server 2014 and always-on availability group configured (on 2-nodes).
I'm writing a Powershell Script which removes the database from the availability group (on the primary server) and then SHOULD drop the database on the secondary Server.
That works most of the time, but not always...
When it fails I get the error message:
Cannot drop database "Customer_2" because it is currently in use.
When i check the secondary DB-Server (sp_who2) while the script is running, i see that there is a process for the DB "Customer_2" with Status="background", Command="DB STARTUP" and LastWaitType="REDO_THREAD_PENDING WORK".
As soon as the script fails, this process for "Customer_2" disapears.
This happens always only on the second database in the availability group.
Why is the process still there, even after I removed the database from the Availability Group on the primary node.
If I remove the database from the availability group manually, the "background" process on the secondary node for that database disappears..
[URL]
View 4 Replies
View Related
Jun 3, 2014
1) We are providing a e governance solution for an organization,where we are providing a centralized database,Client have provided 5 Database server for the same.how can we position the Database Server? there are 5000 Concurrent users and 25000 users,SAN Storage for approx. 60 TB,Database size of 2 TB and growth of 1 TB every year
2) How many instance can we have for above said Case?
3) How much RAM Required ?
View 0 Replies
View Related
Apr 17, 2014
We are in web site development company,Previously we don't have proxy configuration, after implementing Proxy , we have an issue to connect a remote database.
The error pops "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. Error 53".
View 1 Replies
View Related
Jun 25, 2014
I am actually very new to SQL databases, I have received an .MDF and .LDF for a database of size 50 GB...
I need to create or attach these files to a new database and extract some columns then convert them to .text or .csv...
View 5 Replies
View Related
Sep 8, 2014
I've got reporting services on a different box from the database and I can see all the reports, but when I try to setup a subscription, I get this weird error:
The SQL Agent service is not running. This operation requires the SQL Agent service. (rsSchedulerNotResponding)
The same error happens when I connect to the database server via management studio and try to run a job.
I can confirm that SQL Agent service is running.
View 1 Replies
View Related
Sep 23, 2014
While doing the restore of the database is it better to copy the backup file locally and restore or restore from the network path is good option?
What kind of the problems we may get restoring the backup from the network path?
View 9 Replies
View Related
Oct 31, 2014
is there a way to backup all stored procedures in a database?
View 4 Replies
View Related
Dec 29, 2014
how to identify the data leakage in a database , as I heard in one of my environment?
what is the meaning for data leakage ?
View 3 Replies
View Related
Feb 1, 2015
We have a 2 node clustered instance(SQL 2014) with 26 databases and we would like to enable alwayson for one of the databases for reporting (only one secondary and do not need high availability setup). I'm thinking if the reporting application/queries can explicitly connect to the secondary database(Instance namedatabase name) without using a listener and setup the secondary in asynchronous commit mode. Read about the REDO thread blocking due to reporting workload. How does this affect if I implement the secondary in this way.
View 3 Replies
View Related
Feb 11, 2015
Copy mssqlsystemresource.mdf of a recently upgraded server and paste to an old server have same effect of upgrading via .exe installation?
My idea is to save time and administrative efforts in upgrades (Service Packs and/or Cumulative Updates) using this method.
According to BOL:
The Resource database makes upgrading to a new version of SQL Server an easier and faster procedure. In earlier versions of SQL Server, upgrading required dropping and creating system objects. Because the Resource database file contains all system objects, an upgrade is now accomplished simply by copying the single Resource database file to the local server.
View 3 Replies
View Related
Mar 24, 2015
I have SQL 2014. When I try to restore a user database using SSMS GUI, the Restore Database Pop up box never pops up. This happens for any database on this server at any time. Sometimes I get the pop up, some times I dont get.
So I tried to click on Databases on Top and Restore Database, and then select the db that I need to restore from Drop down, then it shows "creating restore plan selecting backups" but it takes forever.
We have full backup and trn log backups every 30 mins. So is it trying to get all these backup files in the background causing this issue? If yes then how to overcome this?
View 4 Replies
View Related
Apr 30, 2015
I would like to know what happens if i shrink the database with truncate only option and do a full backup or transaction log backup ? are the full backup or transaction log backup valid? I know that the performance of the database is bad if i shrink the database. What happens to full backup or transaction log backups?
View 9 Replies
View Related
Jun 19, 2015
How to run the profiler on always on read only database to troubleshoot an ssrs issue ?
View 0 Replies
View Related
Jul 20, 2015
I am having an issue in determining the correct size of a table.
I have a tableA in some DB on transaction server (Enterprise Edition), this table is being replicated in reporting server DB (Standard edition).
When I check the space used by this table in both the databases i see noticeable difference.
I am using EXEC sp_spaceused 'tableA' to determine the space.
Transaction Server
------------------------------------------------------------------------------
name rows reserveddata index_size unused
TableA1439999 695416 KB507048 KB182912 KB 5456 KB
Reporting Server
-------------------------------------------------------------------------------
name rows reserveddata index_size unused
TableA1439999 656904 KB483664 KB172680 KB 560 KB
So I wanted to know what could be the possible reasons for this difference ?
View 5 Replies
View Related
Jul 29, 2015
I'm trying to figure out why this SQL Agent job keeps failing.
We used management studio, and connected as mydomainmyuser, and developed a script to take a backup file from a network share and restore it. It worked fine in SSMS under that login.
After we got it working , we created a SQL Agent job on the same server to run the script, and set the agent job to run under that account that we tested with.
This is the error message we got:
"Executed as user: mydomainmyuser. Create Database permission denied in database master'.
So, I gave that login the rights to Create Database and Create Any Database. Then the error message changed to:
"Executed as user: mydomainmyuser. User does not have permission to RESTORE database 'mydatabase'. [SQLSTATE 42000][ERROR 3013] RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed. "
* I can't use SA for the job account, because the SA account doesn't have rights to see the network folder where the backup file sits, so it has to run under the domain account.
* The user is a member of the dbcreator role - and the serveradmin and sysadmin roles
* The user is a member of dbowner on the database I am trying to overwrite with the restore
* I have given the user the rights CREATE DATABASE and CREATE ANY DATABASE
The only suspicious thing I found was that it appears the server was renamed at one time. When I looked at the login in management studio, I was not able to change some of the rights. On the Securables page, it shows the server name as "MyServer-New", but the server name is "MyServer". It is a replacement, and I suspect that when they did the replacement they named it "MyServer-New", set everything up, then renamed it.
I found this post listed below, and ran the script (shown below), and it showed that the server name was MyServer and the ServerInstanceName is MyServer-New
[URL] .....
SELECT HOST_NAME() AS 'host_name()',
@@servername AS 'ServerNameInstanceName',
SERVERPROPERTY('servername') AS 'ServerName',
SERVERPROPERTY('machinename') AS 'Windows_Name',
SERVERPROPERTY('ComputerNamePhysicalNetBIOS') AS 'NetBIOS_Name',
SERVERPROPERTY('instanceName') AS 'InstanceName',
SERVERPROPERTY('IsClustered') AS 'IsClustered'
I can't reset SQL until the next maintenance window to test changing the server name as outlined in the post.
Am I on the right track with the name change messing up permissions, or is there something else I need to check?
View 5 Replies
View Related