SQL Server Admin 2014 :: Disabling MSDTC For High Availability AlwaysOn
Nov 3, 2015
We are looking at going down the High Availability Always On route. However we have some concerns around the lack of support for MSDTC. In short we are concerned that developers may introduce functionality either on purpose or by mistake that uses the or escalates the Query’s to the MSTDTC. As this could result in database splitting.
Understand that this will be a moot point in SQL 2016 but for 20122014 is it possible to disable the MSDTC to protect against this and run High Availability Always On. ? Does it just need to be disabled on the SQL Server or does it need to be done on the application server ?
View 0 Replies
ADVERTISEMENT
Aug 18, 2015
I am trying to create a job that runs against my High Availability listener server.
It is a fairly simple SQL statement in the job - execute tsql.
When I try and run the job I get the error:
Executed as user: NT SERVICESQLAgent$SQL2014A. The target database ('BB_Prod') is in an availability group and is currently accessible for connections when the application intent is set to read only. For more information about application intent, see SQL Server Books Online. [SQLSTATE 42000] (Error 978). The step failed.
I thought there was a way to run a select statement as a job against the listener? The tsql step is only a select.
Is there a way to pass in the application intent = readonly as part of my SQL statement?
View 2 Replies
View Related
Apr 2, 2015
The MSDN doc makes it sound like after a failover of the primary, the CDC data won't "keep working" on the secondary unless you "To allow the logreader to proceed further and still have disaster recovery capacity, remove the original primary replica from the availability group using ALTER AVAILABITY GROUP <group_name> REMOVE REPLICA. Then add a new secondary replica to the availability group."
We have a few CDC tracked tables that we use and the general idea of AlwaysOn I thought was to minimize all the overhead and let things "just work" so your apps just connect and the listener re-routes everything where it needs to go.
It looks like to get this working properly an automated job /trigger would have to wait for a failover event and then kick off tasks to remove and re-add the replica and perhaps start up the CDC job on the secondary?
View 1 Replies
View Related
Jul 9, 2015
I have a situation where I need to rebuild indexes on a large DB (500G).
When I do a test run of the rebuilds in my test environment it uses 100G of space - which is fine with me.
When I do a rebuild in my High Availability environment - same DB, same script - it eats up over 600G of space and fills the volume.
What can I do without removing my DB from H/A to rebuild the indexes?
View 8 Replies
View Related
Jun 17, 2015
What I asked for: Three Windows Server 2012 R2 machines with independent storage running a SQL Server 2014 AlwaysOn Availability Group. DB1 would be the primary, DB2 would be a synchronous replica, and DB3 would be a remote asynchronous replica.
What I was given: a two-node Windows Server 2012 R2 WSFC to run SQL Server 2014 Enterprise with shared storage and a third (remote) Windows Server 2012 R2 machine with independent storage, also with SQL Server 2014 Enterprise, to host an AlwaysOn Availability Groups asynchronous replica.
DB1 and DB2 (as Cluster1) share an E: drive. The remote DB3 has its own E: drive. Initially, DB3’s E: drive was claimed as a cluster resource and I couldn’t even see it. I’ve had several ugly days trying to make this work and have temporarily given up, installing DB3 as a standalone SQL Server that is no longer part of the WSFC and pointing everything towards that (it was originally a third node in the WSFC).
Is it possible to create an AlwaysOn Availability Group with nested clusters (i.e. create the AOAG with Cluster1 and DB3 and somehow ignore the individual nodes that comprise Cluster1)?
View 6 Replies
View Related
Sep 15, 2015
I am planning to have AlwaysON Availability Groups setup between Server 1 and Server 2
Server 1 -->Publisher-->2014 SQL Enterprise edition-->Windows Std 2012 --> Always on Primary Replica
Server 2 -->Publisher(when DR happens)-->2014 SQL Enterprise edition-->Windows Std 2012 --> Secondary Primary
Server 4 as Subscriber
Server X as Remote Distributor ..
If i create Publications on Server1 (primary replica) to subscriber 4 servcer, will the publication be created automatically in Secondary Replica Server2 ? or do i have to create manullay using GUI/T Sql on Both Servers?
View 1 Replies
View Related
Oct 16, 2014
This is my first deployment of an always on availability group for SQL 2014 and I'm trying to get my custom backup procedure to handle all databases appropriately depending on the primary group. Basiscally I want the system databases and all databases that don't participate in the availability group to be backed up on both nodes and those that do participate backed up ONLY on the primary server. I've looked at the sys.fn_hadr_backup_is_preferred_replica funcation, but would like to only have to test for a single databases existance in the availability group. If the one database is in the group, only backup the system databases and those that don't participate, otherwise backup everydatabase. This would be the case for both full backups and transaction logs.
View 1 Replies
View Related
Nov 13, 2014
I am using SQL Server 2012 and my AlwaysOn High Availability features is not enabled? What should I do. Is this requires any extra system requirements to be installed?
View 5 Replies
View Related
Apr 28, 2014
I came across an issue while migrating from SQL 2005 to SQL 2012 and using AlwaysOn Group. For some strange reason, when ever i connect to the Listener name for each AlwaysOn group, it list all the databases which is on the SQL instance, so i would be able to see databases that is not part of that Availability Group. I am not using default port, so have to put the port after the Name to connect and both Instance and Listener are using different port.
Testing the fail over works fine too, when i perform a manual failover, i can connect to any of the databases in the group from my application with no problem.
Considering that the Listener Port is different to the port which the instance is using?
View 8 Replies
View Related
Dec 1, 2014
We are currently using 2008 environment. We do have an SSIS Package running. The package used to run everyday and take the production server full backups and restore into the another server. Then do some delete commands and do some updates in that database on that server (We have some sensitive data other than Production we have to run that scripts in any environment). After run all those delete statements another team will read the data from that database.
We are planning to migrate to 2014 and set up always on and use the replica as the source. In this case how the package will work?
How to change that SSIS package. With the 2014 always on we are directly reading the data there is no backups to restore then how to run the delete statements?
View 0 Replies
View Related
Aug 17, 2015
We have a requirement to build SQL environment which will give us local high availability and disaster recovery to second site. We have two sites- Site A & Site B. We are planning to have two nodes at Site A and 2 nodes at Site B. All four nodes will be part of same Windows failover cluster. We will build two SQL Cluster, InstanceA will be clustered between the nodes at Site A Server and InstanceB will be clustered between the nodes at Site B, we will enable Always On Between the InstanceA and InstanceB and will be primary owner where data will be written on InstanceA and will be replicated to InstaceB. URL....Now we want we will have instanceC on the Site B and data will be writen from the application available on Site B, will be replicated to the instance on the Site A as replica.
View 6 Replies
View Related
Jun 4, 2015
I have to disable newly implemented database encryption. It's a necessity unfortunately. Can I do this during production hours without much of a hit? I know I have to restart the instance after it's done. Can I expect performance impacts or other issues?
View 1 Replies
View Related
May 27, 2015
I have getting issues when i am creating listener for always On . Error shown as below
Can not bring the Windows server fail over cluster (WSFC) resources online. (Error Code 5942). The WSFC service may not be running or may not be accessible in its currents states, or the WSFC resources may not be in a state that could accept the request.
For information about this error code see "system error code" in windows development documentation
The attempt to create network name and IP address for the listener is failed. The WSFC service may not be running or may not be accessible in its currents states or the value provide for the network name and IP address may be incorrect. Check the state of the WSFC cluster and validate network name and IP address with network administrator. (Microsoft SQL Server error 41066) ...
View 2 Replies
View Related
Jan 12, 2015
I did not worked on AVG in sql 2012, what are the possible errors and how to resolve in always on in sql 2012 .
View 1 Replies
View Related
Jul 3, 2015
We have 4 servers : Server 1 , Server 2 and HA , DR servers.
I designed 2 Plans to get HA support for my databases .
Which of them are better , And is there any problem in my design ?
View 4 Replies
View Related
Oct 7, 2015
I have heard that high numbers of VLF's aren't good. It can impact performance and can delay recovery time, so I wanted to test that.
I created 2 DBs with 100MB datafile and 50MB logfile.
TestDB log file had 100MB autogrowth
TestDB2 log file had 1% growth.
I inserted 1048576 records, took the backup
Ran DBCC loginfo and
TestDB had 40 VLFs and
TestDB2 had 165 VLFs
But when I restored both DBs, this is what I got.
TestDB:
RESTORE DATABASE successfully processed 42258 pages in 4.420 seconds (74.691 MB/sec).
SQL Server Execution times:
CPU Time = 125ms, elapsed time = 8323 ms.
TestDB2:
RESTORE DATABASE successfully processed 42257 pages in 3.943 seconds (83.724 MB/sec).
SQL Server Execution Times:
CPU time = 109 ms, elapsed time = 8314 ms.
Question is: Where is the difference? How TestDB which has 40 VLFs are better than TestDB22 which has 165 VLFs.
View 6 Replies
View Related
May 8, 2015
I got 5 SQL Servers 2008R2 (2x CPUs with 96-384Gb of RAM) with total 1500DBs and around 10Tb of allocated data. Now
I am forced to upgrade to 2012 and 2014, but the old hardware is overkill.
Is it possible to consolidate this to a large SQL AlwaysOn cluster?
We pros/cons could it be to have 2 or 4 nodes?
2 or 4 sockets servers?
My goal was to use ~20 cores Enterprise license on active server.
View 1 Replies
View Related
Jun 17, 2015
I would like to setup replica for one of the databases for reporting. The current environment is a 2 node cluster(active/passive). I would like to add a 3rd node that can server as a secondary replica. The secondary replica will be on asynchronous commit mode.
The database that needs to have alwayson setup has column level encryption enabled.
Other Questions,
* Do I need to backup and restore the service master key on secondary server in order to have the column level encryption to work on secondary server?
* What would be preferred Quorum settings?
* What is the setting for 'readable secondary' for primary and replica db?
* What should be the setting for 'Connections in Primary Role' for primary and replica db?
* We are trying to setup without a Listner. Do I need to setup AG Listener? Can the application exclusively use the [secondary instance name].[replica DB name] without a listener?
View 4 Replies
View Related
Jul 18, 2015
I have a database that is part of AlwaysOn that is filling up the transaction log drive even though I have a daily full backup and transaction logs set for every 2 hours. The backups are going from both the primary and secondary replica backuping up to the shared disk and I have the backup preferences set to the primary.
When I try to shrink the log I get 'The transaction log for database 'DB' is full due to 'LOG_BACKUP''. I have to manually backup the trans log and then shrink, why the maintenance plan backups aren't doing this even though they are "working".
View 9 Replies
View Related
Oct 12, 2015
how to shrink log files in SQL 2014 alwaysOn ?
View 1 Replies
View Related
Oct 25, 2015
We had a big issue today during maintenance work in our SQL environment.
So our environment:
- 2x SQL Server 2014 Enterprise on Windows Server 2012 R2 (SRV1 and SRV2)
-- Both Hyper-V VMs on different Hosts
-- Both configured to an Windows Failover Cluster and AlwaysOn Availability Group (AG1)
-- AG Listener: AG1_lis
-- No shared storage (each Hyper-V Host has its own local storage)
-- Asynchronous Mode
-- SRV1 is primary, SRV2 is secondary SQL node
What happened?
- Shutting down Windows on SRV2 due hardware maintenance
- Cluster goes offline, AG1 goes offline
-- Error message: "Stopped listening on virtual network name 'AG1_lis'."
-- Error message: "The availability group database "DatabaseXY" is changing roles from "PRIMARY" to "RESOLVING" because the mirroring session or availability group failed over due to role synchronization."
Results?
- AG1_lis wasn't available for our applications and they stopped working properly because database connection was lost!
I think, I HOPE, this is not the normale behaviour when one node is shutting down (especially the secondary node!)
View 1 Replies
View Related
May 21, 2014
how does security works between availability groups.
ex if i create an object and grant permissions to a user will that be replicated to secondary replica .
View 4 Replies
View Related
Aug 28, 2014
We are having a conversation at work and the subject of load balancing with SQL came up. Right now we are running SQL Server 2014 on four (4) machines. I am using a AlwaysOn with Availability Groups (AG). Now I know that we can scale out the reading in AG by allowing the secondary serves to receive reads.
Is there a way to be able to do this with writes? Can I have in essences 2 masters that some how reconcile with each other? We are expecting a huge amount of writes in the near future and we need a way for SQL to handle the amount of traffic we are expecting with out any issues.
I explored the possibility of Peer - to - Peer replication; however, it seems that it would be more work if we are constantly making updates to the database scheme.
View 2 Replies
View Related
Nov 10, 2014
Is there any way to trigger an event (ie. call a procedure/job/etc.) when/if an AG fails over?
Not looking to use agent alerts.
View 0 Replies
View Related
Dec 24, 2014
Recently after turning on trace I restarted the sql services on a box which is configured for automatic failover availability groups. The ag has not failed over to other node. The other node was in resolving state. When the restarted server is back, the AG went back to that server. I checked the sys.availability groups field for failover property failure condition level, it's set to 1 which means service restarts should initiate the failover.
View 3 Replies
View Related
Feb 11, 2015
we currently use Backup Scripts from Ola Hallengren, It Says Full (non copy-only) and differential backups are performed on the primary replica. Full(Copy-only) backups and transaction log backups are performed on the preferred replica.
we currently do FULL(COPY_ONLY) Backup everyday and LOG Backups for every 15 min, is there any performance benefit on running the FULL (non copy-only) on the preferred replica .
View 3 Replies
View Related
Sep 1, 2015
We have a server A and a server B setup with SQL2014 High Availability - working fine.
I need to add an additional listener to our new DR site.
What is the best way to do this without impacting production - can I just add the additional replica from nodea as a secondary replica?
View 1 Replies
View Related
Mar 5, 2014
My database server memory utilisation is growing faster from past 1 week. it remained same for 1 week around 55% and now it is going to 70% and increasing.
Total OS memory is 32GB and I kept cap for sql server memory upto 29GB. Dont know what to do..
View 9 Replies
View Related
Nov 12, 2014
Recently I have faced one DBA interview, below is the question they asked me.
" Does AlwaysON secondary replica support Full backup, if it is not why"?
I know AlwaysON secondary replicas support only copy_only and tlog backups, why they wont support full backup?
View 9 Replies
View Related
Feb 1, 2015
We have a 2 node clustered instance(SQL 2014) with 26 databases and we would like to enable alwayson for one of the databases for reporting (only one secondary and do not need high availability setup). I'm thinking if the reporting application/queries can explicitly connect to the secondary database(Instance namedatabase name) without using a listener and setup the secondary in asynchronous commit mode. Read about the REDO thread blocking due to reporting workload. How does this affect if I implement the secondary in this way.
View 3 Replies
View Related
Feb 16, 2015
I am trying to build out an AlwaysOn AG with 2 nodes each in a different subnet (in AWS if that matters), windows 2012r2 / SQL 2014 RTM
I created a AG Listener with 2 ip address, 1 for each subnet (checked that neither ip address are used). But whenever i failover the AG to the secondary, and try and connect via the listener it fails,
I am trying to connect via SSMS from the primary instance. and just time out, If i roll over to the primary i can connect no issues, I've tried playing with the connection settings, upping the time out to 30 secs, adding the MultiSubnetFailover=true. etc but not getting any joy.
View 2 Replies
View Related
Jun 19, 2015
How to run the profiler on always on read only database to troubleshoot an ssrs issue ?
View 0 Replies
View Related
Jun 22, 2015
Having an annoying AG/AO problem with the read only routing side of it.
Let me give some specifics first:
2 SQL Server Instances, Not Clustered.
Availability Group is named 'Ireland'
There is a primary Replica and a Secondary Replica, named:
'IrelandPrimary' and 'IrelandSecondary'
There is a listener configured with the name 'ListenIreland' on Port 14330 (the two 3's are correct)
Read Only Routing URLS are configured as follows:
IrelandPrimary tcp://Ireland.dom.local:49891ALL
IrelandSecondary tcp://Ireland.dom.local:49841ALL
So now my problem:
When I try to connect using the ApplicationIntent=Readonly; or even using -K ReadONLY in sqlcmd I get the error telling me that my connection was actively refused.
This is connecting to the Listener, not the instance itself - that works fine. I'm at a bit of a loss now.
To explain what I am trying to achieve is a for a connection to be redirected to the secondary replica when its set for read-intent.
I've just noticed that it only fails when I specify ApplicationIntent=ReadOnly; If I omit the Intent It connects to the read-write database instead.
View 3 Replies
View Related
