SQL Server Admin 2014 :: Reporting Services On Separate Box From Database
Sep 8, 2014
I've got reporting services on a different box from the database and I can see all the reports, but when I try to setup a subscription, I get this weird error:
The SQL Agent service is not running. This operation requires the SQL Agent service. (rsSchedulerNotResponding)
The same error happens when I connect to the database server via management studio and try to run a job.
I have a SQL server box running 2014 reporting services. I have another server running IIS v8.
I would like to be able to connect to the IIS site and be given the SSRS report browser.
So externally if I browse to [URL], I am presented with the report server interface, the same as if I browse to http://xxx.xxx.xxx.xxx/reports internally.
I've migrated a server with SQL Server 2008R2 and Reporting services into a new box with SQL Server 2014, but forgot to change the timezone to the correct one. I've changed it later, but it seems like the reports are running by the old default timezone. The schedule says that the report should run at 6:30am, but the Last Run column shows 8:30 PM.
I need to fix it without manually updating each subscription with some date/time conversion.
When I try to install sql server 2014 on my machine,all the features were installed but except Reporting services-Native and error occurred as shown below.
Error details: § Error installing SQL Server Reporting Services Updating permission setting for folder 'C:WindowsTemp' failed. The folder permission setting were supposed to be set to 'DA;OICI;0x1200af;;;S-1-5-80-4063824523-3130906261-2263067808-2545249320-213050741)'. Error code: 0x84CF0003
I am running into a weird issue with a new SQL Reporting Services 2014 server I built. I installed SQL Reporting 2014 on Windows Server 2012 R2 and configured Kerberos, but the site is extremely slow. After some reconfiguration and log captures I have determined the issue has to do with the Kerberos setup, however I am running a similar configuration with SQL Reporting Services 2008 on Windows Server 2008 R2 and do not run into the same errors.
The error I see while using Wireshark is KRB Error: KRB5KDC_ERR_BADOPTION NT Status: STATUS_NO_MATCH. When I drill down the into the error I can see the kerberos string is testprjmnmtreports14.company.com, which is the URL we are using to access the site. I made sure to add that name as an SPN for the service account that is running SQL Reporting Services, however I still receive the error.
Then I tried configuring the site to run without a hostheader, so I accessed the site with the server name, ECTSTSQLRS5, and the site works perfectly fine, no errors are reported either. So it seems I have isolated the issue down to Kerberos but I am not sure how to resolve it. Here is some more information about my environment:
DNS/URL used: testprjmnmtreports14.company.com Server Name (FQDN): ECTSTSQLRS5.company.int AD Domain Name: company.int Server Version: Windows Server 2012 R2 AD Functional Level: 2008 R2
As you can see I am trying to use a .com address but my AD domain is .int which I think is the issue, but I do not have the same problem on my other server that is running Windows Server 2008 R2. What do I need to do to allow my new site on 2012 R2 to work with this DNS Alias?
We have a 2 node clustered instance(SQL 2014) with 26 databases and we would like to enable alwayson for one of the databases for reporting (only one secondary and do not need high availability setup). I'm thinking if the reporting application/queries can explicitly connect to the secondary database(Instance namedatabase name) without using a listener and setup the secondary in asynchronous commit mode. Read about the REDO thread blocking due to reporting workload. How does this affect if I implement the secondary in this way.
We have multiple databases on a single instance in an OLTP environment. I have my data files on a separate SAN LUN from my transaction log files (and a few NDFs split out onto additional LUNs). I was wondering if there is a performance benefit to putting each LDF file on its own LUN? Or at least my few busiest LDFs?
We are currently on 2012, but I'm having to put together specs for a 2014 installation and need to answer this question without having an environment in which I can benchmark different setups. I just want to hear whether or not others have done this (why or why not?).
I proposed on a new server that we separate Data Files, Log Files, tempDB, Backups, etc. onto separate LUNS on a SAN with High Speed Solid State Drives.I was told that with the new technology with solid state SAN's that it would decrease performance and that it did not work the same way as it did when you had RAID 5's etc.I thought that if things were cared out correctly by a SAN Administrator they would know how to configure for optimal performance.
I would like to setup replica for one of the databases for reporting. The current environment is a 2 node cluster(active/passive). I would like to add a 3rd node that can server as a secondary replica. The secondary replica will be on asynchronous commit mode.
The database that needs to have alwayson setup has column level encryption enabled.
Other Questions,
* Do I need to backup and restore the service master key on secondary server in order to have the column level encryption to work on secondary server? * What would be preferred Quorum settings? * What is the setting for 'readable secondary' for primary and replica db? * What should be the setting for 'Connections in Primary Role' for primary and replica db? * We are trying to setup without a Listner. Do I need to setup AG Listener? Can the application exclusively use the [secondary instance name].[replica DB name] without a listener?
Is it possible to stick RS on a separate web server without Sql server being on that box? What steps to I have to take to install the RS web services portion on this web server?
We have run into an issue on a dedicated SSAS 2012 SP1 server where the allocated memory is not being utilized, causing some slowness in use, connections, and queries.
Total Memory on the server is 512, and after startup, the utilized memory gets up to a max of 60GB and stops there. Checking the Resource Monitor, msmdsrv.exe is only taking around 39GB overall. With the current properties, that should be at 330GB. Am I missing something in the settings or in configuration that should be changed?
Version: SQL Server 2012 SP1 Enterprise (11.0.3000) OS: Windows Server 2012 Datacenter - Fully patched and up to date Databases: 2 Tabular models Server: 512GB RAM
Is it possible to have Analysis Services in both modes or are they mutually exclusive?I have a machine setup with Multidimensional AS and would like to know if it's possible to add a Service in Tabular mode.
I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error : Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'. Msg 3013, Level 16, State 1, Line 1 RESTORE DATABASE is terminating abnormally.
And have chosen the destination - unstructered (flat) file. But the wizard proposes to export only one table (dbo.Acocount) and all the others from the list are not exported. How can I export ALL the data into one file.I need to do this to edit the syntax in the editor and then import this data and database structure into Postgresql
I have two databases like each other that one is the backup of another. Each DB have 2 filegroups. I want to replace one filegroup from one db to another. How do I do this? Or how do I backup and then restore?
Query to show logins that don't have any permissions within the SQL instance? I'm tasked with doing some cleanup and have found some cases where the database was deleted or moved to another server but the logins that used it were not deleted. I'd like to identify them to research.
For instance a query to show logins that have no permissions in any of the existing databases would be handy. I'm thinking it would be complicated by the need to loop through all of the existing databases and then outer join it to the list of instance level logins. Going to try to write something like that but was hoping that a script already exists.
I have multiple SQL 2008 severs with databases. Also, 1 mirroring server in place.
Since my database count is increasing can i have only 1 mirroring server. Is there any limit of db at mirroring server. I would have approx. 150 databases.
I want to Replace The Big Log database with A new one ( A database with same structure).But current DB has many connection .
This is my plan :
1- Create a new database with same structure.
2- Rename current database to olddb with this code :
USE master GO EXEC sp_dboption CurDataBase, 'Single User', True EXEC sp_renamedb 'CurDataBase', 'OldDataBase' GO 3- Rename Newdb to current DB. USE master GO EXEC sp_renamedb 'NewDataBase', 'CurDataBase'
is it true ? and Tsql code is ok ? (dont forget many of connection to curdatabase (that Is a log db) and loss some seconds data is not problems)
My database went into suspected mode. and after we had run some script, it came out from the suspected mode. but we encountered this error while opening table in database.
2009-11-02 15:46:42.90 spid51 Error: 824, Severity: 24, State: 2. 2009-11-02 15:46:42.90 spid51 SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:43686; actual 0:0). It occurred during a read of page (1:43686) in database ID 23 at offset 0x0000001554c000 in file 'H:MSSQL.SQL2008MSSQLDATAmy_db.mdf'.
Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
I tried to copy db from server to server by sa user ( sql login) but this error raised and the copy failed
Executed as user: NT ServiceSQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 9:55:24 AM Progress: 2015-05-11 09:55:24.45 Source: 10_32_0_201_10_32_0_202_Transfer Objects Task Task just started the execution.: 0% complete End Progress Error: 2015-05-11 09:56:31.87 Code: 0x00000000 Source: 10_32_0_201_10_32_0_202_Transfer Objects Task
An error occurred while transferring data. See the inner exception for details. StackTrace: at Microsoft.SqlServer. Management. Smo. Transfer. TransferData()The Execution method succeeded, but the
[code]....
number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:55:24 AM Finished: 9:56:32 AM Elapsed: 67.892 seconds. The package execution failed. The step failed.
Is there a better way to deal with the virtual log files?...I see several approaches in dealing/decreasing the virtual log files for a database..want to know what's the best n safest approach, from the masters here?
I have an environment with MS-SQL Server 2014 and always-on availability group configured (on 2-nodes).
I'm writing a Powershell Script which removes the database from the availability group (on the primary server) and then SHOULD drop the database on the secondary Server.
That works most of the time, but not always...
When it fails I get the error message:
Cannot drop database "Customer_2" because it is currently in use.
When i check the secondary DB-Server (sp_who2) while the script is running, i see that there is a process for the DB "Customer_2" with Status="background", Command="DB STARTUP" and LastWaitType="REDO_THREAD_PENDING WORK".
As soon as the script fails, this process for "Customer_2" disapears.
This happens always only on the second database in the availability group.
Why is the process still there, even after I removed the database from the Availability Group on the primary node.
If I remove the database from the availability group manually, the "background" process on the secondary node for that database disappears..
1) We are providing a e governance solution for an organization,where we are providing a centralized database,Client have provided 5 Database server for the same.how can we position the Database Server? there are 5000 Concurrent users and 25000 users,SAN Storage for approx. 60 TB,Database size of 2 TB and growth of 1 TB every year
2) How many instance can we have for above said Case?
We are in web site development company,Previously we don't have proxy configuration, after implementing Proxy , we have an issue to connect a remote database.
The error pops "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. Error 53".
