SQL Server Admin 2014 :: Restore Database Permission Failure
Jul 29, 2015
I'm trying to figure out why this SQL Agent job keeps failing.
We used management studio, and connected as mydomainmyuser, and developed a script to take a backup file from a network share and restore it. It worked fine in SSMS under that login.
After we got it working , we created a SQL Agent job on the same server to run the script, and set the agent job to run under that account that we tested with.
This is the error message we got:
"Executed as user: mydomainmyuser. Create Database permission denied in database master'.
So, I gave that login the rights to Create Database and Create Any Database. Then the error message changed to:
"Executed as user: mydomainmyuser. User does not have permission to RESTORE database 'mydatabase'. [SQLSTATE 42000][ERROR 3013] RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed. "
* I can't use SA for the job account, because the SA account doesn't have rights to see the network folder where the backup file sits, so it has to run under the domain account.
* The user is a member of the dbcreator role - and the serveradmin and sysadmin roles
* The user is a member of dbowner on the database I am trying to overwrite with the restore
* I have given the user the rights CREATE DATABASE and CREATE ANY DATABASE
The only suspicious thing I found was that it appears the server was renamed at one time. When I looked at the login in management studio, I was not able to change some of the rights. On the Securables page, it shows the server name as "MyServer-New", but the server name is "MyServer". It is a replacement, and I suspect that when they did the replacement they named it "MyServer-New", set everything up, then renamed it.
I found this post listed below, and ran the script (shown below), and it showed that the server name was MyServer and the ServerInstanceName is MyServer-New
[URL] .....
SELECT HOST_NAME() AS 'host_name()',
@@servername AS 'ServerNameInstanceName',
SERVERPROPERTY('servername') AS 'ServerName',
SERVERPROPERTY('machinename') AS 'Windows_Name',
SERVERPROPERTY('ComputerNamePhysicalNetBIOS') AS 'NetBIOS_Name',
SERVERPROPERTY('instanceName') AS 'InstanceName',
SERVERPROPERTY('IsClustered') AS 'IsClustered'
I can't reset SQL until the next maintenance window to test changing the server name as outlined in the post.
Am I on the right track with the name change messing up permissions, or is there something else I need to check?
I have two databases like each other that one is the backup of another. Each DB have 2 filegroups. I want to replace one filegroup from one db to another. How do I do this? Or how do I backup and then restore?
I have SQL 2014. When I try to restore a user database using SSMS GUI, the Restore Database Pop up box never pops up. This happens for any database on this server at any time. Sometimes I get the pop up, some times I dont get.
So I tried to click on Databases on Top and Restore Database, and then select the db that I need to restore from Drop down, then it shows "creating restore plan selecting backups" but it takes forever.
We have full backup and trn log backups every 30 mins. So is it trying to get all these backup files in the background causing this issue? If yes then how to overcome this?
What is the best way to restore a database from a folder of backups (including full, diff and log backups) without using the backup history in msdb?
I have a restore process that restores all backups on a regular schedule in order to fully verify their integrity. To do this, I use the backup history in msdb on each server that I'm monitoring. I had a thought the other day that I would be in trouble if I lost msdb. Then my backup history would only be as good as the last backup of msdb.
What I'd like to do is read a folder of backup files and generate a restore script up to a specified time. Would I use RESTORE HEADERONLY to do this? If so, would I use PowerShell to traverse each file in the folder?
In Windows Server 2012. How do I do a System Restore to a previous restore point?I need to install the 64 bit and 32 bit Oracle Client Install for connections in SSIS and to create Oracle Linked Servers.
If you make a mistake it is not fun removing it. Sometimes it corrupts the machine and it is difficult to uninstall since there is not an Oracle Universal installer for Oracle 11g.If you install the 32 bit before the 64 you mess up the machine.how to create a restore point.
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
We have created a DDL trigger on SQL server 2005 database for DB audit purpose. Following is the script used for trigger creation
USE [master] GO SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[ChangeLog](
[Code] ....
After the DDL trigger creation. Application team started reporting following error while executing a stored procedure.
********************************* Error 1: INSERT failed because the following SET options have incorrect settings: 'ARITHABORT'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods.
Error2: [Execute SQL Task] Error: Executing the query "exec sp_drop_indexes_EnhLeaseData delete from dbo.leases where vin_num='XXX' and lease_acct_num='XXXX' delete from dbo.leases where vin_num='XXX' and lease_acct_num='080066225' " failed with the following error: "INSERT failed because the following SET options have incorrect settings: 'ARITHABORT'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
We have push transaction replication from A database to 2 other B and C database. I have configured email to sent upon failure of subscription job of B and D database on Database A. Is this the way that we need to configure email to send when there is replication break up or failure.
Database is MS sql server 2008 R2 Publication Database: A Replication mode : Transaction Replication Replication used : Push Replication from database A Subscription Database: B and C
I have a user who needs access to views like(dbo.viewnameabc1,dbo.viewnameabc2 and so on...) dbo.viewnameabc* and anytime the user creates the view he already have the permission to view those views....
I have configured smtp email in MS sql server and configure email to schedular job when schedular jobs become failed. Can i configure email so that email will be sent from scheduler job on both success of job and Failure of job?
Due to a SQL 2014 cluster installation failure related to security while setting up the primary node, I had to remove the node and any related installation programs from the node and redo the installation again. However I am unable to use the machine name as the SQL network name during the instance configuration, I get the following:
Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: The SQL Server failover cluster instance name "MachineName" already exists as a server on the network. Specify a different failover cluster instance name.I am still getting the same name since the node name "MachineName" is listed under the cluster name. I have used machine name as SQL network name without an issue. I do not have any existing SQL machine name in network using same machinename which I want to use for this installation.
My sql databases in SQL Server 2014 has the status "suspend" as I saw in SQL Management Studio. I can't restore to serviceable condition sql databases through standard procedures. I need to restore .mdf file.
when execute the restore log command, in the messages window it shows how many seconds the restore takes, at the meantime, on the status bar, it also shows the seconds the command takes.
Two values are different and could be very different, please see below examples , restoring takes 1.8 seconds, but in total the command takes 4 seconds to complete, the other one is 8.1 seconds and 12 seconds.
What does SQL Server or Windows do after the restoring?
pic a:
pic b:
I did a xperf, I can see after the restoring is completed, sql server did garbage collect and log write, which just run very quickly, but storage is busy on reading the log file for nearly 2.2 seconds( 4-1.8), and 4 seconds ( 12-8.1) .
pic 1:
pic 2:
see pic 1 above, from 13 to 17, the restore operation is finished, but the storage jump to 100% active to do some reads, only reads no writes. zoom that period shows pic 2, it read 4096 (I don't know the unit size) for about 4 seconds, what does this do?
Data file, log file, backup file are no different drives, but all local drive, the interesting point is the read jumped after restoring, I tested it on different server, same result...
is there a way to restore all file groups except one? example: Database A has 10 filegroups, but 1 of them is defunct, so i cant delete it and there's no backup for restore it.Can I create a new DB restoring the 9 good FGs from a database A's backup?
we have our cubes in Server A and SQL DB resides on Server B (we are on SQL 2014), from last couple of days are cube started failing due to below error:
OLE DB or ODBC error: Protocol error in TDS stream; HY000; Protocol error in TDS stream; HY000; Protocol error in TDS stream; HY000; Communication link failure; 08S01; TCP Provider: An existing connection was forcibly closed by the remote host. ; 08S01
I have been going through some blogs to understand the error but don't find any specific yet.
I have a windows 8 pc that I just got and installed sqlexpress 2014. My buddy haw windows 7 and installed sqlexpress on his pc. We create a db on his pc, did a backup, copied the backup to my pc. In ssms I right click on "database" > restore database. click device and the button to find my file. I navigate to the folder where the file shows in file explorer but the .bak file does not show in ssms to restore from. This is probably a windows thing but I have don't know what to look at.
What is the best method to restore a DBTest1 (with one .mdf and one .ldf) into DBTest2 (with one .mdf, multiple .ndf data files and with 4 filegroups associated with specific data files). I do not see how the one .mdf file (in DBTest1) can be separated into the other 4 filegroups (in DBTest2). This does not sounds like it is possible with Backup DBTest1/Restore to DBTEST2 or (Detach/Attach) because the underlying filegroup and file structure is different.
What method should be used to get the data and structure from DBTest1 (includes 1100 Tables and 550 GBs of Data) into DBTest2 (with 4 filegroups)? Is the following possible:
1) First, in DBTest2, execute a script to create tables/indexes on appropriate filegroups.
2) In DBTest2, use scripts to pull data from DBTest1 into DBTest2, for example INSERT INTO DBTest2.dbo.tables with SELECT FROM DBTest1.dbo.tables OR use SELECT/INTO DBTest2.dbo.tables FROM DBTest1.dbo.tables.
Or, is it possible to use the BULK INSERT or BULK COPY Options? Export/Import Wizard?
Does the Create Index step needs to be done after the data is loaded into DBTest2?
I have an issue to restore an encrypted backup via GUI.I can restore an encrypted backup on another instance using t-sql command, but cannot do the same using the GUI of sql server 2014. The message error is: No backupset selected to be restored.I have restored the master key from the instance where the encrypted backup was created on the instance where I want to restore the encrypted backup, then restored the certificate. I managed to open the master key. I have the following versions:
On the instance where the encrypted backup is taken: Microsoft SQL Server 2014 - 12.0.2000.8 (X64) Feb 20 2014 20:04:26 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
On the instance where I'm trying to restore the bakcup via GUI: Microsoft SQL Server 2014 - 12.0.2000.8 (X64) Feb 20 2014 20:04:26 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: )
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
Data got deleted on Friday evening, need to have database restored to FRiday afternoon and also some data has been entered on Monday, which needs to be there.
I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error : Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'. Msg 3013, Level 16, State 1, Line 1 RESTORE DATABASE is terminating abnormally.
And have chosen the destination - unstructered (flat) file. But the wizard proposes to export only one table (dbo.Acocount) and all the others from the list are not exported. How can I export ALL the data into one file.I need to do this to edit the syntax in the editor and then import this data and database structure into Postgresql
Query to show logins that don't have any permissions within the SQL instance? I'm tasked with doing some cleanup and have found some cases where the database was deleted or moved to another server but the logins that used it were not deleted. I'd like to identify them to research.
For instance a query to show logins that have no permissions in any of the existing databases would be handy. I'm thinking it would be complicated by the need to loop through all of the existing databases and then outer join it to the list of instance level logins. Going to try to write something like that but was hoping that a script already exists.
I have multiple SQL 2008 severs with databases. Also, 1 mirroring server in place.
Since my database count is increasing can i have only 1 mirroring server. Is there any limit of db at mirroring server. I would have approx. 150 databases.
I want to Replace The Big Log database with A new one ( A database with same structure).But current DB has many connection .
This is my plan :
1- Create a new database with same structure.
2- Rename current database to olddb with this code :
USE master GO EXEC sp_dboption CurDataBase, 'Single User', True EXEC sp_renamedb 'CurDataBase', 'OldDataBase' GO 3- Rename Newdb to current DB. USE master GO EXEC sp_renamedb 'NewDataBase', 'CurDataBase'
is it true ? and Tsql code is ok ? (dont forget many of connection to curdatabase (that Is a log db) and loss some seconds data is not problems)
My database went into suspected mode. and after we had run some script, it came out from the suspected mode. but we encountered this error while opening table in database.
2009-11-02 15:46:42.90 spid51 Error: 824, Severity: 24, State: 2. 2009-11-02 15:46:42.90 spid51 SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:43686; actual 0:0). It occurred during a read of page (1:43686) in database ID 23 at offset 0x0000001554c000 in file 'H:MSSQL.SQL2008MSSQLDATAmy_db.mdf'.
Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
I tried to copy db from server to server by sa user ( sql login) but this error raised and the copy failed
Executed as user: NT ServiceSQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 9:55:24 AM Progress: 2015-05-11 09:55:24.45 Source: 10_32_0_201_10_32_0_202_Transfer Objects Task Task just started the execution.: 0% complete End Progress Error: 2015-05-11 09:56:31.87 Code: 0x00000000 Source: 10_32_0_201_10_32_0_202_Transfer Objects Task
An error occurred while transferring data. See the inner exception for details. StackTrace: at Microsoft.SqlServer. Management. Smo. Transfer. TransferData()The Execution method succeeded, but the
[code]....
number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:55:24 AM Finished: 9:56:32 AM Elapsed: 67.892 seconds. The package execution failed. The step failed.
Is there a better way to deal with the virtual log files?...I see several approaches in dealing/decreasing the virtual log files for a database..want to know what's the best n safest approach, from the masters here?
I have an environment with MS-SQL Server 2014 and always-on availability group configured (on 2-nodes).
I'm writing a Powershell Script which removes the database from the availability group (on the primary server) and then SHOULD drop the database on the secondary Server.
That works most of the time, but not always...
When it fails I get the error message:
Cannot drop database "Customer_2" because it is currently in use.
When i check the secondary DB-Server (sp_who2) while the script is running, i see that there is a process for the DB "Customer_2" with Status="background", Command="DB STARTUP" and LastWaitType="REDO_THREAD_PENDING WORK".
As soon as the script fails, this process for "Customer_2" disapears.
This happens always only on the second database in the availability group.
Why is the process still there, even after I removed the database from the Availability Group on the primary node.
If I remove the database from the availability group manually, the "background" process on the secondary node for that database disappears..
1) We are providing a e governance solution for an organization,where we are providing a centralized database,Client have provided 5 Database server for the same.how can we position the Database Server? there are 5000 Concurrent users and 25000 users,SAN Storage for approx. 60 TB,Database size of 2 TB and growth of 1 TB every year
2) How many instance can we have for above said Case?
