SQL Server Admin 2014 :: Restoring DB With Full Text Catalog / Index
Aug 6, 2015
I need to restore a SQL 2008 db on SQL 2014 instance with out upgrading the database(changing compatibility level).
This database has full text enabled. I see one full text catalog an 2 full text indexes.
Do I need to worry about anything or can I perform a clean restore from the backup with full text import?
Do I need to rebuild the catalog in this case?
View 1 Replies
ADVERTISEMENT
Oct 13, 2000
When restoring a database that contained a full text catalog to another server I noticed that the full text catalogs were not restored. However, the system tables still had the information on these catalogs. As such, I couldn't delete the catalogs (because they didn't exist).
In the end, I deleted the relevant lines from the system table sysfulltextcatalogs and sysobjects and then built a new set of catalogs. Obviously this isn't ideal.
I am restoring databases to a backup/standby server on a regular basis and was wondering if there are any official/documented methods of restoring full text catalogs to another server. (i.e. without having to mess around with the system tables). There doesn't seem to be much in BOL.
Any pointers or ideas on this would be welcome.
Regards,
Karl
View 1 Replies
View Related
Nov 2, 2007
When I try to create a full-text catalog on my local database I get an error that I can not find support information for.
Here is the command I run :CREATE FULLTEXT CATALOG asset_search_values_catalog on FILEGROUP ftFileGroup IN PATH 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLData' as default
Here is the error message I get:
Msg 7689, Level 16, State 1, Line 1
Execution of a full-text operation failed. 'No such interface supported'
I check the properties of my database and Full-text is enabled.
I am running SQL Server 2005, on an XP Pro, SP2.
I had originially installed in side by side with SQL Server 2000.
I even tried uninstalling SQL Server 2005 (to try a re-install), I could not even uninstall the database.
What should I do.
View 1 Replies
View Related
May 9, 2007
We are running a full text index on a single field in one table. The catalogs have grown to over 53GB. Is there a way to shrink these down?
Thanks,
Scott
View 1 Replies
View Related
Oct 28, 2015
We are running SQL 2014 SP1. We are using defined Full text indexes on several tables in the database. However, on one specific set of servers, a certain search will not return any data. This exact same search works on another set of servers built identically. The first responses I'm sure will be stop list, but I have dropped and recreated the FTI multiple times with different stop lists or no stop list at all and get the same results.
The specific word being searched on is YUM. If I change the value to YUMk, it actually returns, and if I change the data to TUM it returns, but YUM does not. This exact query is working on multiple other systems, so it seems to be something environmental, but I haven't been able to pinpoint it.
View 3 Replies
View Related
Aug 20, 2007
Hi guys,
What should I do in order to make a Full Text Index / Catalog and then using the Contain predicate?
Thanks in advance,
Aldo.
View 3 Replies
View Related
Dec 1, 2014
Until yesterday I had a server running SQL Server 2008 R2 - with all the SQL Server DB files on an attached disk array.
The server died - so I attached the disk array to a new server - and all the DB data files are visible there.
I installed SQL Server 2014 on the new server and am trying to work out how to point it at the existing database files.
I also have backups of the DB's - but they will take ages to copy over and restore - so it would be much easier to just use the db files. Should I restore the master db first (easy as its small)?
View 9 Replies
View Related
Jun 10, 2015
I am in the process of moving databases from a SQL 2005 Standard version to a 2-node 2014 cluster.All of my 2005 databases back up successfully.They all restore without issue except for one database that has a full text catalog. I get this message
Msg 7610, Level 16, State 1, Line 2
Access is denied to "fileStoragedataMSSQLSERVERFullTextCatalog", or the path is invalid.
Msg 3156, Level 16, State 50, Line 2
File 'sysft_FTCatalog' cannot be restored to 'fileStoragedataMSSQLSERVERFullTextCatalog'. Use WITH MOVE to identify a valid location for the file.
Msg 3119, Level 16, State 1, Line 2
Problems were identified while planning for the RESTORE statement. Previous messages provide details.
Msg 3013, Level 16, State 1, Line 2
RESTORE DATABASE is terminating abnormally.
[code]....
I went as far as giving the folder full access to everyone temporarily and received the same error.
View 1 Replies
View Related
Nov 23, 2005
Can any one help - my Full text catalog on a remote shared sql server hasdied and i need to recreate it completely - I have done this before but i'velost the code to do it.If I remember right what i did was use start --> run --> to run an exe in themssql folder that connected to the remote server - but i've lost all theparameters I needed for it.ANy help much apprectiated
View 1 Replies
View Related
Sep 23, 2014
While doing the restore of the database is it better to copy the backup file locally and restore or restore from the network path is good option?
What kind of the problems we may get restoring the backup from the network path?
View 9 Replies
View Related
Dec 12, 2014
With all the new functionality, can 2014 now restore a single table from a standard backup without using any third party tools? I have looked, but can't see this listed as a feature (though that doesn't mean it's not there, maybe I've just missed it).
View 6 Replies
View Related
Apr 7, 2015
Why do I leave my DB in Restoring State after attaching to the instance? Could not this fire a redo activity on Transaction Log?
Or, How does sql server undo all uncommitted transactions on active vlf during recovery?
View 2 Replies
View Related
Oct 6, 2015
Message: Executed as user: NT AUTHORITYSYSTEM. The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases [SQLSTATE 42000] (Error 9002). The step failed in my sql server agent job i have the above error, this type of errors i got some of multiple jobs.
View 9 Replies
View Related
Oct 27, 2015
I've got the below and have several variation and still cant seem to find a perfect way to query the server to bring back that last full backup per db. I'm shopwing mutilple records in the backup set db w/ type = 'D'. I look online and type D = Database. Which i assumed it meant full database backup. Apparently not. Try running the below on one of your full databases. Then check to see if the date is actually the last backup date.
DECLARE @db_name VARCHAR(100)
SELECT @db_name = DB_NAME()
-- Get Backup History for required database
SELECT TOP ( 30 ) s.database_name,
m.physical_device_name,
[Code] ....
View 9 Replies
View Related
Jun 11, 2015
Dead lock is coming in select query in application because of index. It is identified after enabling trace in database and identified by reading deadlock xml file. After index removal, deadlock is not coming in same query. But it is affecting query's performance slightly. Is it correct way to remove index if dead lock is coming because of index?
View 3 Replies
View Related
Nov 12, 2014
Recently I have faced one DBA interview, below is the question they asked me.
" Does AlwaysON secondary replica support Full backup, if it is not why"?
I know AlwaysON secondary replicas support only copy_only and tlog backups, why they wont support full backup?
View 9 Replies
View Related
Nov 13, 2014
If data is modified (by an insert, update, or delete) while the backup is running, will the backup contain those changes or will it be added to the database afterwards?
View 2 Replies
View Related
Apr 26, 2015
We have a database with a table that contains around 180m records. Each day a further 70k are inserted. No records are ever deleted as this table is used for archiving only.Users are required to perform SELECTs on this table constantly but due to the high number of INSERTs the indexes become very fragmented very quickly. My aim is to avoid daily rebuilds of the indexes which is what our software house is telling us we have to do.
This is the DDL for the table:
CREATE TABLE [dbo].[Inventory](
[EAN] [bigint] NOT NULL,
[Day] [smalldatetime] NOT NULL,
[State] [int] NOT NULL,
[Quantity] [int] NULL,
[StockValue] [float] NULL,
CONSTRAINT [PK_Inventory] PRIMARY KEY CLUSTERED
[code]...
There are also three clustered Indexes on this table each referencing a single column. The problem from my side is that I cannot understand why the three columns in a primary key would also be configured as non-clustered indexes.My solution would be one of the following:
1. Accept the tables are going to be fragmented and require a daily rebuild (don't like this one!)
2. Partition the table
3. Remove the non-clustered Indexes and let the clustered index for the primary key do the work.
View 9 Replies
View Related
May 18, 2015
I would like to put a Clustered Index on a date column in a current heap, but one question/concern.This heap every month has thousands of rows deleted and even more added later. How much of an issue will this cause the Clustered Index as far as page splits? I was thinking Fill Factor of 70%.I would normally just test and still will on Dev box, but my Dev box is much smaller than production as far as power.
View 6 Replies
View Related
Jul 1, 2015
I created columnstore index on the table with 20 columns and about 1000 000 000 rows
every day added about 5M rows
"select" queries became faster because of batch mode and table demand less disk space then before
I have also 6 similar tables with 5 000 000 000 rows and plan to move them on columnstore index
server has 128 G RAM
What pitfalls I could face if I will have so many columnstore indexes on one server?
How a could see problems in DMV?
View 3 Replies
View Related
Jul 9, 2015
I have a situation where I need to rebuild indexes on a large DB (500G).
When I do a test run of the rebuilds in my test environment it uses 100G of space - which is fine with me.
When I do a rebuild in my High Availability environment - same DB, same script - it eats up over 600G of space and fills the volume.
What can I do without removing my DB from H/A to rebuild the indexes?
View 8 Replies
View Related
Oct 4, 2015
I want to create a lot of index for my database for performance.
But I need find memory usage by indexes.
How to find memory usage by index in sql server?
View 1 Replies
View Related
Oct 31, 2015
We use SQL server always on feather on my database and we distribute statement on main database server and mirror database server for raise performance.
My police for split statement is DML (insert, update and delete) statement go to main DB and Read Data (select) statement go to mirror DB.
I want know can I use different index on main DB and mirror Database?
Because some index are used in mirror DB not used in main database.
View 3 Replies
View Related
Jun 26, 2015
We face slow performance issue for like taking long time for same query execution after We apply index rebuild and reorganize index. But, after execution of query or procedure for 2 -3 times, performance will be faster. I have following questions
1 do we need to update stats after we rebuild an reorganize index.
2. is it will be slow for 1-2 times for every query and stored procedure execution after we rebuild and reorganize index?
View 2 Replies
View Related
Sep 15, 2015
I'm trying to determine how much space I would need for my data drive and log file drive to do index rebuild. I have a database which is 100gb, it is in simple recovery mode. let me know what to have a look at to determine how much space.
View 7 Replies
View Related
Jul 9, 2015
I was trying to configure maintenance plan to take nightly full database backup and Log backup. I was trying to configure it like in attached file. Any links that i can follow and configure as in attached file.
View 7 Replies
View Related
Apr 8, 2000
I want to create a full-text catalog.But when I entered the catolog's name 'softonline' and put the yes button,the system always prompt me the words "An unknown full-text failure (80004005) occurred in function CreateCatalog on full-text catalog 'softonline'". How can I do? Thank you very much.
View 1 Replies
View Related
May 21, 2008
I want to develop a windows application using cshap 2.0 and sql express 2005. How can i attach a full text catalog in csharp? How can i deploy full text catalog to the client machine?
View 2 Replies
View Related
Sep 13, 2014
I've been fixing some issues lately where weekly maintenance has been causing logs to grow and filling disks.
Is there any rule of thumb for allocating log space for doing reorgs and rebuilds in a worst case scenario? I'm thinking 3x the largest database size?
I've been watching them run on databases in the range of 50GB where the logs are growing well over that for rebuilds or even reorgs. Once you have a few databases like this on a server, you can suddenly eat through a lot of disk space just for holding logs during maintenance.
View 3 Replies
View Related
Mar 2, 2015
I have 10 Gb index and disk space only left 5gb .
How can i rebuild index ?
View 4 Replies
View Related
Oct 21, 2006
Once I add new data I can only get search results to return if I rebuild my fulltext catalog, how do I stop this?thanks-c
View 2 Replies
View Related
Jul 9, 2005
I am trying to connect to a full text catalog in SQL. How do I do that? I tried using the same format as connecting to a table but it did not work.
View 1 Replies
View Related
Mar 4, 2004
I have a database which has (god knows how) ended up with a Full text catalog which is believes is on the E: drive of the machine. The problem is that machine only has C: drive.
If I try and rebuid the catalog (sp_fulltext_catalog 'documents','rebuild') I get an error saying that e:... doesn't exist.
If I try and drop the catalog (sp_fulltext_catalog 'documents', 'drop'), I can't because it contains a full-text index.
If I try and drop remove the full text index from the table (sp_fulltext_table 'tbl_upload','drop'), I can't because Full-text catalog has been lost. Use sp_fulltext_catalog to rebuild and to repopulate it.
HELP
Does anybody know how to either drop it so that I can recreate it or how to update it so that it looks at a disk that the machine actually has?
View 1 Replies
View Related