I am using a monitoring system where I can monitor a numeric SQL result assuming the result is one field and one row.I would like to do this to say monitor the free available space or percentage on say the Master database. DBCC SQLPERF gives me a few columns and results for all databases on the server.
View 2 RepliesI'm using SQL accounting software now and i have a problem with my designer report. When i using designer report to design my customer statement of account, after i save the new design, i haven't rename it for the new statement report so the name there empty and i exit the designer report. So when i re-open the designer report, suddenly pop out "field value required". What should i do...? How can i re-open the designer report again?
View 1 Replies View RelatedI need to grab the value of the ReportFolder built-in global filed to a particular report on Report Manager, i.e., the full path to a particular report, when the user runs/executes the particular report, SSRS. Once I get this I need to process the path and get the Parent folder to the report and pass that to a stored procedure to do some business logic.
View 0 Replies View RelatedI want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
I inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
I want to use BCP to load data from a text file.
By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.
bcp aborts if ANY of the rows contains a FK violation. No data get loaded.
So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.
I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?
If I install an instance with Windows Only authentication, and then change it to Mixed Mode, if I enable the sa login, the password has already been set. What is the default? If it's generated, how secure is it? Is the password generated? What algorithm is used for that?
View 9 Replies View RelatedMy sql databases in SQL Server 2014 has the status "suspend" as I saw in SQL Management Studio. I can't restore to serviceable condition sql databases through standard procedures. I need to restore .mdf file.
View 9 Replies View RelatedIn our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?
View 1 Replies View RelatedIs there a way to schedule a sql job to run at different intervals
For eg:
The job should run at
7:00 Am
8:00 AM
and then at 10:00 Am
We installed the Sql 2014 in Test server.
We observed frequently
"Process 0:0:0 (0x1e10) Worker 0x00000006B6D341A0 appears to be non-yielding on Scheduler 13. Thread creation time: 12906028806348. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 13%. System Idle 84%. Interval: 70189 ms."
Is it better to run the profiler or performan counter?
What are the filters we have to select in the profiler to monitor the Sql server
I have a SQL server box running 2014 reporting services. I have another server running IIS v8.
I would like to be able to connect to the IIS site and be given the SSRS report browser.
So externally if I browse to [URL], I am presented with the report server interface, the same as if I browse to http://xxx.xxx.xxx.xxx/reports internally.
What are my options?
What is the best approach for a read only copy of a database that is ~ 1TB. The primary database is fed nightly with an ETL process. We are currently trying to duplicate the ETL to read only server but that process is not going well. So we are looking at other options to let SQL make the copy.
The primary database is on a Win12R2 with SQL 12 or 14, a 2 node A/P failover cluster.
The read only copy will be on a Win12R2 with SQL 12 or 14. It is not a requirement to fail over to the read only copy if the primary should go down.
What would best the approach to accomplish the end result?
I did not worked on AVG in sql 2012, what are the possible errors and how to resolve in always on in sql 2012 .
View 1 Replies View RelatedI have 10 databases which are configured as principal in mirroring I need to failover all the databases as part of failover , instead of writing query each database as parner failover, is an script which will generate the databases as principal to failover ?
View 3 Replies View RelatedHow to check the delay in between replicas in AG?
View 3 Replies View Relatedmy 4 GB .OST file is corrupted and i am not able to access my mails and contacts.
View 2 Replies View RelatedI got query from sysproccesses and the result for one spid is : SQLAgent - TSQL JobStep (Job 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61 : Step 1
Which job has this code : 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61
After installing SSMS on some computers - the only way we can get SSMS to run correctly is to run it as the administrator. Is there a way where you don't have to do that? These end users are logging as themselves and have accounts in SQL Server all set up - but SSMS will only launch for them if we right click and select "run as administrator".After doing some digging - it seems that this is a common problem out there.
View 3 Replies View RelatedHave a SQL 2014 install and cannot for the life of me get the maintenance plan to remove old backups. I've tried everything. Rights to the folder where the backups are stored are adequate, extension set in the clean up task is as it should be, etc. Log shows the job ran successfully. Running the command manually shows successful completion, but backups are still not removed.
View 9 Replies View Relatedwhen execute the restore log command, in the messages window it shows how many seconds the restore takes, at the meantime, on the status bar, it also shows the seconds the command takes.
Two values are different and could be very different, please see below examples , restoring takes 1.8 seconds, but in total the command takes 4 seconds to complete, the other one is 8.1 seconds and 12 seconds.
What does SQL Server or Windows do after the restoring?
pic a:
pic b:
I did a xperf, I can see after the restoring is completed, sql server did garbage collect and log write, which just run very quickly, but storage is busy on reading the log file for nearly 2.2 seconds( 4-1.8), and 4 seconds ( 12-8.1) .
pic 1:
pic 2:
see pic 1 above, from 13 to 17, the restore operation is finished, but the storage jump to 100% active to do some reads, only reads no writes. zoom that period shows pic 2, it read 4096 (I don't know the unit size) for about 4 seconds, what does this do?
Data file, log file, backup file are no different drives, but all local drive, the interesting point is the read jumped after restoring, I tested it on different server, same result...
I've got an old version of SQL Server 2008 R2 Developer Edition on an old PC which is failing. I've got a new PC and have put SQL Server 2014 Developer Edition onto it. Now before the old machine completely dies, I've gotten into SSMS on the old machine and did a backup of the databases I want to save. I've moved the .BAK files to where I could get to them from SSMS on the new machine. I've gotten into SSMS and tried to do a restore the database to my new machine. However I'm getting an error that does not make any sense to me.
The database I'm I've backed up is named JobSearch. When I backed it up, that was the only database I had selected. Like I said I copied the .BAK to the new machine. Got into SSMS, told it that I wanted to restore the JobSearch database, telling it where I wanted to put it, and it then immediately fails with a:
"Restore of database 'JobSearch' failed. System.Data.SqlClient.SqlError: Logical file 'VideoLibrary_Data' is not part of the database 'JobSearch'. Use RESTORE FILEISTONLY to list the logical file names."
Well of course VideoLibrary isn't "the logical file". But neither did I select VideoLibrary (which is a database I also want to move, but I'm doing one at a time). So what in heck is going on here? Why is it complaining about a database I haven't even selected to back up? Why, when I check everything on the old machine, it's backing up JobSearch, but on the new machine it sees VideoLibrary?
I am new in SQL Server, What to check ,what action do i need to take while adding a new column to a table.
View 5 Replies View RelatedMessage: Executed as user: NT AUTHORITYSYSTEM. The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases [SQLSTATE 42000] (Error 9002). The step failed in my sql server agent job i have the above error, this type of errors i got some of multiple jobs.
View 9 Replies View RelatedA log file size of a production database has been increase from 4gb to 150 gb initial size.Now i want to find when it will grow & how much it grow & which transaction is responsible for this.
View 6 Replies View RelatedWe have applications connected to SQL using windows authentication. While having connection with Application user can also access to Database instance on the same time as well. We need to limit the access of user outside application.
View 6 Replies View RelatedAnd have chosen the destination - unstructered (flat) file. But the wizard proposes to export only one table (dbo.Acocount) and all the others from the list are not exported. How can I export ALL the data into one file.I need to do this to edit the syntax in the editor and then import this data and database structure into Postgresql
View 4 Replies View RelatedQuery to get CU# of sql server Instance ?
View 3 Replies View RelatedIs there a formula for calculating how expensive a transaction will be in terms of disk space used before its run. I dont want it accurate to the MB, but rough enough so I can determine how much additional space to assign to a transaction log or SAN volume.
Currently we're reindexing ~25billion rows, nothing too wide, say 12 columns consisting of 1 varchar(50) and the rest ints, bits and money.Roughly speaking if I reindex the clustered index on an int indetity, (with sort_in_tempdb) how would I calculate the the disk space used?
I have two databases like each other that one is the backup of another. Each DB have 2 filegroups. I want to replace one filegroup from one db to another. How do I do this? Or how do I backup and then restore?
View 3 Replies View RelatedI would like to know if there is any option to Restrict DML statements in SSMS for a user where the same user should be able to perform these actions through application on particular database.
View 1 Replies View RelatedAssume if i have a connection(Application intent readonly) starts with reading, writing and again reading data for a report. how it will works in SQL 2014 Always availability on?
View 3 Replies View Relatedwe are about to start a logshipping with the secondary server in read only mode.
I just wanted to know the disadvantages of using a read only on the secondary server.
I mean whether the transactional logs will be restored periodically or it won't be restored till users are connected on the secondary server.