I have configured smtp email in MS sql server and configure email to schedular job when schedular jobs become failed. Can i configure email so that email will be sent from scheduler job on both success of job and Failure of job?
View 3 RepliesI need to send email to the team when the job run completes.
On that server we have two instances one is default (2008R2) and another is 2014 From 2008r2 it will send email to the team.
I tried the profile account using anonymous and enter my company email & password but still the status is showing failed.
I do have smtp account details, I use the same port number but still failing?
We have push transaction replication from A database to 2 other B and C database. I have configured email to sent upon failure of subscription job of B and D database on Database A. Is this the way that we need to configure email to send when there is replication break up or failure.
Database is MS sql server 2008 R2
Publication Database: A
Replication mode : Transaction Replication
Replication used : Push Replication from database A
Subscription Database: B and C
We installed the Sql 2014 in Test server.
We observed frequently
"Process 0:0:0 (0x1e10) Worker 0x00000006B6D341A0 appears to be non-yielding on Scheduler 13. Thread creation time: 12906028806348. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 13%. System Idle 84%. Interval: 70189 ms."
Is it better to run the profiler or performan counter?
What are the filters we have to select in the profiler to monitor the Sql server
I have a job under the SQL Server Agent, which is configured to send an email notification on failure.
The job is scheduled to run every 30 minutes.
Is it somehow possible to configure it so that it only sends one email in case of subsequent failures instead of "spamming" my inbox every half hour?
I am implementing a fax solution (Right Fax) and pulling email information from a table and passing into a variable. In order to send out a fax via email, the syntax is in the following example below:
Example:
To send a fax from Outlook to Jane Doe at 555-1212, enter:
[RFAX:Jane Doe@/FN=555-1212]
When the following syntax gets passed into the Send Mail Task, into the "To" line and the package is executed I'm receiving the following.
[Send Mail Task] Error: An error occurred with the following error message: "The specified string is not in the form required for an e-mail address.".
[Send Mail Task] Warning: The address in the "To" line is malformed. It is either missing the "@" symbol or is not valid.
I realize it’s a malformed email address. Is it possible to create a group and instead of the fax syntax pass the group name?
We have created a DDL trigger on SQL server 2005 database for DB audit purpose. Following is the script used for trigger creation
USE [master]
GO
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[ChangeLog](
[Code] ....
After the DDL trigger creation. Application team started reporting following error while executing a stored procedure.
*********************************
Error 1:
INSERT failed because the following SET options have incorrect settings: 'ARITHABORT'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods.
Error2:
[Execute SQL Task] Error: Executing the query "exec sp_drop_indexes_EnhLeaseData delete from dbo.leases where vin_num='XXX' and lease_acct_num='XXXX' delete from dbo.leases where vin_num='XXX' and lease_acct_num='080066225' " failed with the following error: "INSERT failed because the following SET options have incorrect settings: 'ARITHABORT'. Verify that SET options are correct for use with indexed views and/or indexes on computed columns and/or query notifications and/or xml data type methods.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I'm trying to figure out why this SQL Agent job keeps failing.
We used management studio, and connected as mydomainmyuser, and developed a script to take a backup file from a network share and restore it. It worked fine in SSMS under that login.
After we got it working , we created a SQL Agent job on the same server to run the script, and set the agent job to run under that account that we tested with.
This is the error message we got:
"Executed as user: mydomainmyuser. Create Database permission denied in database master'.
So, I gave that login the rights to Create Database and Create Any Database. Then the error message changed to:
"Executed as user: mydomainmyuser. User does not have permission to RESTORE database 'mydatabase'. [SQLSTATE 42000][ERROR 3013] RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed. "
* I can't use SA for the job account, because the SA account doesn't have rights to see the network folder where the backup file sits, so it has to run under the domain account.
* The user is a member of the dbcreator role - and the serveradmin and sysadmin roles
* The user is a member of dbowner on the database I am trying to overwrite with the restore
* I have given the user the rights CREATE DATABASE and CREATE ANY DATABASE
The only suspicious thing I found was that it appears the server was renamed at one time. When I looked at the login in management studio, I was not able to change some of the rights. On the Securables page, it shows the server name as "MyServer-New", but the server name is "MyServer". It is a replacement, and I suspect that when they did the replacement they named it "MyServer-New", set everything up, then renamed it.
I found this post listed below, and ran the script (shown below), and it showed that the server name was MyServer and the ServerInstanceName is MyServer-New
[URL] .....
SELECT HOST_NAME() AS 'host_name()',
@@servername AS 'ServerNameInstanceName',
SERVERPROPERTY('servername') AS 'ServerName',
SERVERPROPERTY('machinename') AS 'Windows_Name',
SERVERPROPERTY('ComputerNamePhysicalNetBIOS') AS 'NetBIOS_Name',
SERVERPROPERTY('instanceName') AS 'InstanceName',
SERVERPROPERTY('IsClustered') AS 'IsClustered'
I can't reset SQL until the next maintenance window to test changing the server name as outlined in the post.
Am I on the right track with the name change messing up permissions, or is there something else I need to check?
Due to a SQL 2014 cluster installation failure related to security while setting up the primary node, I had to remove the node and any related installation programs from the node and redo the installation again. However I am unable to use the machine name as the SQL network name during the instance configuration, I get the following:
Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: The SQL Server failover cluster instance name "MachineName" already exists as a server on the network. Specify a different failover cluster instance name.I am still getting the same name since the node name "MachineName" is listed under the cluster name. I have used machine name as SQL network name without an issue. I do not have any existing SQL machine name in network using same machinename which I want to use for this installation.
We recently had a problem with DB Mail. SQL jobs that sends an email succeeded but the email in the job fail to sent. There was a problem with the email server. The error is included. We fixed the problem with the email server. How can I get an alert when a DB Mail email fails send?
Date4/23/2015 10:01:06 AM
LogDatabase Mail (Database Mail Log)
Log ID5907
Process ID13204
Mail Item ID5702
Last Modified4/23/2015 10:01:06 AM
Last Modified Bysa
Message
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2015-04-23T10:01:06). Exception Message: Cannot send mails to mail server. (Insufficient system storage. The server response was: 4.3.1 Unable to accept message because the server is out of disk space.).
)
we have our cubes in Server A and SQL DB resides on Server B (we are on SQL 2014), from last couple of days are cube started failing due to below error:
OLE DB or ODBC error: Protocol error in TDS stream; HY000; Protocol error in TDS stream; HY000; Protocol error in TDS stream; HY000; Communication link failure; 08S01; TCP Provider: An existing connection was forcibly closed by the remote host.
; 08S01
I have been going through some blogs to understand the error but don't find any specific yet.
I have an SSIS Package that executes a stored procedure. It turns out my stored procedure was missing.
However, the SQL Job Scheduler reported that step as success.
Can anyone tell me why?
`Le
Exec Prcoess task with source : ftp
destination :ftpunzip
work directory ftpunzip
executable : c:Program FilesWinZip
i am using expressing.
It is doing the unzip but getting this error
package process on server server1 has failed within the Task 'Unzip Files' with the following errors:
>
> File/Process "WZUNZIP.EXE" does not exist in directory "c:Program FilesWinZip".
This is the error message i am getting it
I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
Hi Guys, basically I have a scheduled job in MSSQL7, which on completion e-mails one of the operators.....
How can I get this job to email more than one operator upon completion???
Cheers....
Hi all,
I have a stored proc that uses xp_cmdshell to boot off a batch file on the NT side of the box (box OS is Windows 2000 Advanced Server).
Here is the pertinent code:/*----- Kick off the NT bat job to suck over the data through the web service pipe*/
SELECT @NTCommand = 'D:TradeAnalysisWondaDataStoreJobsPullFromWONDA _InstitutionalRankings.bat ' + CONVERT(varchar(10), @ReqDate, 101)
EXECUTE @e_error = master.dbo.xp_cmdshell @NTCommand
SELECT @m_error = CASE WHEN ISNULL(@e_error, 0) <> 0 THEN (@e_error + 50000) ELSE @@Error END
IF @m_error <> 0 GOTO ErrorHandlerThe trouble is that the batch file is failing (soft error, caught internally to the batch file, which then kills itself, screaming loudly all the way).
The batch file is using the following "voice" in which to scream in pain as it dies (a.k.a., using this code to terminate itself, which kills the cmd shell and returns 13 as an error code)REM WonDBService.exe says we failed
Date /T
Time /T
EXIT /B 13
Meanwhile, back at the ranch (errr...back in stored procedure), what is being returned is a ZERO (in the first code block, @e_error is being set to ZERO when the xp_cmdshell returns from the bat file.
So, now that I have ruled out the obvious *LOL* how can I get my xp_cmdshell to realize it has failed miserably at the one, tiny, simple, not-too-much-to-ask, job that it is designed to do?
I have a number of stored procedures that run one after the other. How do you code to get the success or failure so that some logic can be applied accordingly? I've heard of the TRY CATCH structure, but I new and have yet to use it. How many different ways can success or failure be handled in code?
View 4 Replies View RelatedHello,
When I run my package, a task will fail, however, the package will claim that it was successful. Why is this, and how can I trigger a failed package when one task fails?
Thanks in advance.
How can I send an email from sql server.
I tried the following code which gives me no errors but doesn't send the email.
Code:
CREATE Procedure sp_SMTPMail@SenderName varchar(100),@SenderAddress varchar(100),@RecipientName varchar(100),@RecipientAddress varchar(100),@Subject varchar(200),@Body varchar(8000)ASSET nocount ondeclare @oMail int --Object referencedeclare @resultcode intEXEC @resultcode = sp_OACreate 'CDONTS.NewMail', @oMail OUTif @resultcode = 0BEGINEXEC @resultcode = sp_OASetProperty @oMail, 'From', @SenderAddressEXEC @resultcode = sp_OASetProperty @oMail, 'To', @RecipientAddressEXEC @resultcode = sp_OASetProperty @oMail, 'Subject', @SubjectEXEC @resultcode = sp_OASetProperty @oMail, 'Body', @BodyEXEC @resultcode = sp_OAMethod @oMail, 'Send', NULLEXEC sp_OADestroy @oMailENDSET nocount off GO
GO
Can anyone recommend a solution to send email from sql server?
When I execute Parent SP, it should Return 1 when Child SP is executed Successfully and Zero when Child SP fail .below are sample SP
CREATE PROCEDURE EXEC_CHILD_PROC
AS
BEGIN
SELECT 99/0
END
[code]...
I tried several way , but did not get correct syntax to modify Parent SP give 1 or 0 on child SP execution
Please excuse my ignorance as I'm a complete noob when it comes to vb.net.
I have 2 script tasks, each connected to an upstream task via Success and Failure constraints. Each script assigns a value to a variable, depending on whether the task succeeds or fails.
My code thus far is:
Code Snippet
Public Sub Main()
Dts.Variables("strEmailBody").Value = _
"Business Model Reporintg Control Complete - Status = Success"
Dts.TaskResult = Dts.Results.Success
End Sub
What i want to do is use a single script task depending on the success or failure of the package, setting the variable value accordingly.
If there are no errors Then
"Success"
Else
"Failure"
I've tried
Code SnippetIF CBool(Dts.Results.Success) Then...
But whislt it compiled, didn't evaluate correctly during runtime.
Can anyone suggest where I'm going wrong? Again I'm totally new to .net and I'm surprised I've gotten this far!
Thanks in advance.
Leigh
ummm. sorry, I've read and seen the tutorials but somehow and missing this.
I have a foreach container. Inside a dataflow task, with an XML source, a data conversion (cause of urrr UNICODE) and and an ole DB data source.
By design (and for this simple example), I get a volation if I attempt to load loads with out deleting entries from my table. No biggie, I would just like this simple package to rename my file to extension .good or .bad depending on success of each loop.
Where and what do I need for this?
Thank you for any help or information!
More of a general SOAP service call question.
Does anybody have any experience/advice on how to ensure that SOAP service call success/failures are returned to the calling app?
Consider a client that calls a SOAP service during which the client goes down and is unable to receive the SOAP response, the work having been done by the service. Similarly, the SOAP service may perform the task but a failure in the return makes the client think the process failed.
What would be the best way to ensure that the client is notified to avoid the call having to be made again?
Are there middleware tools that can be used to provide a form of message queuing for SOAP service calls?
Thanks
Hi all;I need to generate an automatic mail alert based on the SQL server 2005 database to list of user (email) four times year based In this table there are dates according to that date it need to send email automatically four time each email after three month. I would be great full if you can find me solution for this issue. Thanks reem
I have a SSIS pkg that gets data from SQL and do data conversion and Insert into OLE db AS400 destination, There is a flag column in SQL table , that has to be updated to true, once the records are inserted in AS400 how do i do that in SSIS
SQL oledb ---------> dataConversion ---------------> AS400 OLE db Destination
|
update SQL table Flag column<---------------------------------|
I have an SSIS package that executes a stored procedure. In that stored procedure is a try/catch block. If the try isn't successful, it goes to the catch block which does a rollback. So when I execute the SSIS package, it tells me that the stored procedure was ran successfully because there essentianlly were no errors and everything ran fine, but in reality, everytime it goes into the catch block and does a rollback, I want the SSIS package to fail as well. How would I send back a failure to the SSIS package from the stored procedure?
View 13 Replies View RelatedHow to send email using asp.net 2.0 and how to find the smtp mail server name?
View 1 Replies View RelatedHi,
We are using SSIS to load some 100k records from flat file to Oracle Destination. We are using Oracle 10g client.
But during the execution after some 5hrs or 6hr with 900k records upload we are getting the message Package execution completed. In the Execution results there is no message related to success or failure and the tasks in the Data Flow where yellow in color. What might be the problem? Any information regarding this case will be helpful for us.
Regards,
Roopa.
I have multiple task flows with precedence constraints and i have changed the constraint as completion to execute the package even though there is failure in one of the tasks in the package but every time the send mail success is executed instead of Send mail Failure task.
View 0 Replies View RelatedIs there a way to send binary file stored in SQL Server as email attachment without downloading it to the file system?
View 1 Replies View RelatedI have been looking for solution to automate the reports. I have many customers and many reports.each customer has their own will to receive individual report on specific day to their given/subscribed email addresses. So I have customer and report name and weekday, weekly, monthly (different schedules) and list of customers where each report is sent to.
Is there any way to implement this automation using simple T-SQL?
I have been able to make report in Crystal report and through command like (use TSQL) to generate report output in any format, lets say, .pdf and based on customer list send them email on their scheduled day.
I do not want to do this all in Crystal Report, because there is already SSRS we have but my question is, Ids there any easy way that i pass a command line to my sql server report and that returns me output so that i can send email to my clients?
I inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
I am trying to send a csv file with 15000 records via the database mail in SQL Server 2014. The problem is that when I open my email the csv only contains 209 records. I have tried the same thing in SQL Server 2012 and it works as expected - it sends the 15000 records in the csv.
I have tested this on several sql servers with 2014 edition on them, and I have the same issue on all of them. The query breaks off at different points on each sever - for example one of them breaks off at 209 records as i said above, another one at 307. The last record always gets truncated at the same place. The csv attachment size it's about 64 kb - which is well below the 4MB limit i've configured the database Maximum File Size bytes parameter.
What i am doing basically is creating a job that is meant to execute a stored procedure and send the results in a csv in an email. The stored procedure is something like:
select col1, col2, col3
from table A1
where col1 > 1000 order by col1