SQL Server Admin 2014 :: Setting Up AG On Default And Named Instance
Aug 26, 2014Plan to setup AG on in both default and named instance of two nodes. Can we do it ?
View 9 Replies
ADVERTISEMENT
SQL Server Admin 2014 :: Cannot Connect To Named Instance (2nd Instance) From Local SSMS
Jul 22, 2015I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamicsFINANCE) using SQL authentication from local SSMS, I get below error message:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.
SQL Server Admin 2014 :: Ports Firewalls And A New Named Instance
Nov 12, 2014I have an existing 2012 default SQL Express. It's set up on a VPS managed by a third party. I have an administrator account on this 2012 Windows server. I'm not much of a sysadmin or a DBA but I get around. ;)
I've installed a new NAMED instance on this VPS and can not connect to it with client tools (SSMS). If I remote in, I can connect this way.
What steps might a seasoned DBA expect to make when getting a new named instance ready for the world.
Assign a port? Check the port?
Open the firewall for the port?
Will this new named instance listen on a different port than the previously installed SQL Express instance?
SQL Server Admin 2014 :: Creating Named Instance On Cluster
Apr 22, 2015I need to create a named instance on a sql cluster.
How do I perform this? Is it as simple as creating a named instance on a standalone machine? Is there anything I need to consider?
SQL Server Admin 2014 :: Remote Access To Named Instance
Jul 6, 2015I try to connect from a pc to a SQL Server on another pc. Both pc’s are in a workgroup. I want to connect from a Windows Forms application to a named instance on the other computer. By now I have been able to connect from one pc to SQL Server on the other with tcp:smurfin, 52782.
I want to be able to use servernameinstancename (instead of portnumber) to make a connection in a Windows Forms application.
I’ve checked / tried te following:
•In the properties of the instance, tab Connections, the option Allow Remote Connections is enabled
•In Configuration Manager: TCP is enabled
•The service SQL Server Browser is started
•On the tab IPAddresses, in the section IPAll, there is NO portnumber for TCP Port. And TCP Dynamic Ports has the nummer 52782
•I have created un inbound rule for port 52782 and also for 1434 (SQL Server Browser). And to be on the save side: a rule for 1433 as well.
•Restarted the service
If I run the following code in SQL Server, that same port number (52782) is returned:
EXEC xp_ReadErrorLog 0, 1, N'Server is listening on', N'any', NULL, NULL, 'DESC'
GO
SELECT local_tcp_port
FROM sys.dm_exec_connections
WHERE session_id = @@SPID
[Code] ....
SQL Server Admin 2014 :: Static Port Of Named Instance
Nov 3, 2015I changed the Port of my named instance to use static port but still error log is giving two values ,why??
spid15sServer is listening on [ 'any' <ipv6> 50152].
spid15sServer is listening on [ 'any' <ipv4> 50152].
ServerServer is listening on [ ::1 <ipv6> 57518].
ServerServer is listening on [ 127.0.0.1 <ipv4> 57518].
SQL Server Admin 2014 :: Setting Up Aliased Instance Name
Jul 15, 2015How to set up a specific aliased instance name. I have installed two identical named instances on a server called LONPOCSQL. The instance names are FINPROD and FINREP, so when connection to them remotely I connect to LONPOCSQLFINPROD or LONPOCSQLFINREP. My question is how can I configure it so that I can connect remotely to the instances in by referencing them as FINPRODFINPROD and FINREPFINREP?
The reason for this is that I need to replace a very old system where the applications connect to the sql servers by referencing them as FINPRODFINPROD and FINREPFINREP respectively. I'm trying to set up a 2-node SQL alwayson AG cluster for HA+DR with one server in the prod DC and the other in DR. I need both instances to live one the same box.
1. As far as I'm aware SQL Aliases only work when the connection is local, remote connections fail
2. I can't create a DNS alias called "FINPRODFINPROD" and point it at a listener name as slashes "" are not allowed in DNS CNAMEs
3. My old boss once built a SQL 2008 R2 failover cluster with two instances on it called "lonsql40lonsql40" but there is no documentation on how he did it and I can't find anything on the web
SQL Server Admin 2014 :: Picking Static Port Number For Named Instance
Apr 3, 2015Basically the question is, which number should I pick?
View 4 Replies View RelatedConnection String For Default Instance Of SQL Server 2005, On A Box Also Running A Named Instance Of SQL Server 2000
Nov 15, 2007The box I am trying to connect to is running two instances of SQL Server.
There is a SQL Server 2005 instance which is the default. There is a SQL Server 2000 instance which is named 'SQLSERVER'.
I can connect to the SQL Server 2000 instance no problem:<add key="ConnectionString" value="server=MYPCSQLSERVER;database=mydatabase;user id=****;password=****" />
However, I am having trouble connecting to the Default SQL Server 2005 instance. I have tried:
<add key="ConnectionString" value="server=MYPC;database=mydatabase;user id=****;password=****" />
but it doesn't work. I have tried explicitly setting SQL Server 2005 to use port 1434 (as SQL Server 2000 is running on port 1433), and then used:
<add key="ConnectionString" value="server=MYPC,1434;database=mydatabase;user id=****;password=****" />
but this doesn't work either.
Am I mssing something here? Any help much appreciated
Thanks...
SQL Server Admin 2014 :: Replication Communication Via Named Pipes?
Sep 14, 2015We have transaction replication configured across multiple SQL instances and could find one of the replication (from publisher to subscriber) net transport sessions is happening via Named pipes rather than TCP. where to troubleshoot this issue and what action to be taken to make it happen via TCP.
View 0 Replies View RelatedSQL Server Express: Install As Default Or Named Instance?
Jan 9, 2007Hi Folks,
Is it better to install SQL Server Express Default or install as Named Instance?
What are the pros and conns?
Thanks
SQL Server Admin 2014 :: How To Configure Named Pipes Protocol Correctly
Oct 5, 2015I've been reading about the protocols and i've been trying to connect to my SQL SERVER using each one of the protocols, but i think I'm missing something, i dont have any problems using Shared Memory and TCP protocols, but I'm not pretty sure how to connect to my remote SQL SERVER using NAMED PIPES protocols. The books On Line of Microsoft refer that you can connect using this protocol using the next syntax: Connecting to a default instance by specifying a named pipe name:
APPHOSTpipeunitapp
Connecting to a named instance by specifying a named pipe name:
APPHOSTpipeMSSQL$SQLEXPRESSSQLquery
Connecting to default instance by name, forcing a named pipes connection:
np:APPHOST
Connecting to named instance by name, forcing a named pipes connection:
np:APPHOSTSQLEXPRESS
But I can't connect to my remote SQL SERVER, if i try the same with my local SQL SERVER i don't have any problems. I've been reading the articles so many times searching something about Named Pipes is only for local connections, but Microsoft say that it's posible to connect to a remote SQL SERVER, but i don't know how to do that. The firewall is disabled, I changed the APPHOST in the above syntax for the IP address of my SQL SERVER but it didn't work..
Migrating From SQL2K Named Instance To SQL2K5 Default Instance
Feb 19, 2007Hi, I have a task in hand to migrate (upgrade) from SQL2K named instance to SQL2K5 default instance. There are many intranet applications touching current SQL2K. I would like to perform this upgrade such that I don't have to touch any application code - meaning I don't have to change the connectionstring to point to new Default instance. How can I achieve this?
So, in otherwords, here is what I want to achieve:
Current Server: SQL2K: SERVER_AINSTANCE_A (named instance)
Upgraded Server: SQL2K5: SERVERB (default instance)
If I have both default, I could achive this by setting up DNS alias after migration done so that any call for SERVER_A would point to SERVER_B. But in my case, I don't have SERVER_A, I have named instance. Is there any solution?
Regards,
Vipul
SQL Server Admin 2014 :: Setting Up Transactional Replication
Sep 10, 2015I have created a publication on SQL 2014 SP1/CU1 it is going to a distribution server also a SQL 2014 database. The subscriber is also SQL 2014 SP1/CU1. When I set it up there are no errors. I fire up Replication MGR and it looks good after the snapshot and distribution agent have been started. Again, no errors. When I do a tracer token the information gets to the distributer in 1 - 4 seconds but it never gets to the subscriber, the tracer token monitoring screen only shows pending for distributor to subscriber.
I can upload the scripts used to create the publication and/or the subscription but am a little hesitant because of server names in the scripts.
Named Instance Problems (Default Of 7.0/2000 Instance)
Oct 10, 2001I am trying to set up a Named Instance of SQL 2000 on the same machine that has a default instance of SQL 7.0. The setup always completes and I am able to register the Named Instance of the SQL Server with which it was installed on. However, when I try to connect the users to the database, with both windows and SQL authentication, I receive a SQL server not found error. I have tried an alias setup as well as physically specifying the port number in settup up an ODBC connection.
Has anyone ran into similar problems?
Also, has anyone been able to successfully complete the process as mentioned above?
Move SQL2005 From Default Instance To Named Instance
Mar 2, 2007I have a server with sql server 2005 installed as the default instance -- I have a piece of software that needs SQL2000 to be the default instance. Is there a way other than install new sql2005 named instance and move databases to rename my SQL2005 instance from <machinename> to <machinename>sql05 for example?
Bryan
SQL Server Admin 2014 :: What Is The Default SA Password
Jan 13, 2014If I install an instance with Windows Only authentication, and then change it to Mixed Mode, if I enable the sa login, the password has already been set. What is the default? If it's generated, how secure is it? Is the password generated? What algorithm is used for that?
View 9 Replies View RelatedSQL Server Admin 2014 :: Create Three AGs And Listeners In Same Instance
Jul 28, 2015I have built a SQL 2014 Always on Cluster. I need to create three Availability groups and listeners in the same instance. Do I need 3 separate IP address for each listener or one IP address can be shared for all 3 Listeners ?
View 3 Replies View RelatedInstalling A Default Instance AFTER A Named Instance???
Aug 24, 2006I have SQL Server 2000 Standard Edition (sp3a) running on a windows 2003 (sp4) Server.
It is a Production Server with 3 NAMED Instances and NO Default Instance.
Does anyone know if I can rerun the SQL Server Install and add a DEFAULT Instance to this box without disrupting the other Named Instances???
Migrating From Named Instance To Default Instance
Oct 30, 2007I installed SQL Server 2005 recently on a cluster. I didn't go for the default instance and instead I named the instance option. Now I would like to migrate everything from the named instance to the default instance, which I haven't yet installed.
Is this an easy process? What about the logins and the maintenance plans and jobs? Is there anything else I need to be aware of?
Create A Named Instance On Top Of A Default Instance
Apr 13, 2007Hi
I've never had to do this, but when I downloaded the Web Workflow Approvals Starter Kit, it requested that I install the database into a User Instance of .SQLEXPRESS.
Now the problem is, I've installed it onto a default instance, so I was wondering whether you can create a named instance on top of a default instance... and if so, how would you do that?
Cheers
Chris
SQL Server Admin 2014 :: Does Each Node Need To Have Same Instance Name For Listener To Work?
Apr 15, 2015Say I have 2014 AlwaysOn setup and working:
SQLNode1 ->Instance01
SQLNode2 ->Instance02
When I setup my listener: ListenerA...Do I need to use the instance name in it?
ListenerAInstance01 or ListenerAInstance02 depending on which SQLNode is the "active" availability group?
Am I better off to use the same instance name for both nodes, since my goal is to have all databases on both instances in the same availability group and sync'd? When SQLNode1 migrates over to SQLNode2 I will need to update the instance name in my connection string on the listener from ListenerAInstance01 to Instance02? When I connect with SSMS do I just use: ListenerAInstance01 (or 02)?
SQL Server Admin 2014 :: AlwaysOn And Instance-level Items
Jul 16, 2015How you are handling the replication of the many instance-level objects/items (logins, linked servers, server roles, database mail, operators, on and on) to the replicas in an AlwaysOn topology.
I'm especially curious about DBAs managing larger SQL Server environments. In my current environment, we have approximately 80 production SQL instances containing about 650 databases that require high availability and disaster recovery.
We use mirroring today and have a solid, home-grown solution for replicating the instance-level items from production to disaster recovery. AlwaysOn changes things a bit since we'll have multiple replicas and of course the database could be active on any one of those at any time. So my concern is about instance-level items being created in one instance but never deployed to the other instances participating in the AG group.
SQL Server Admin 2014 :: 600 Instances Installed With Default Settings?
Mar 10, 2015I am tasked with correcting 600 SQL Server instances default settings. I would like to use powershell, if possible to loop thorough each named instances (I have a list) and apply the following settings. I also need to query the server for the installed memory and apply * 80% logic for maxmem, and look at the VCPU count and adjust the MAXDOP to that number.
USE MASTER
GO
EXEC sp_configure 'recovery interval (min)', '0';
RECONFIGURE WITH OVERRIDE;
EXEC sp_configure 'allow updates', '0';
RECONFIGURE WITH OVERRIDE;
EXEC sp_configure 'user connections', '0';
[code].....
SQL Server Admin 2014 :: List All Databases In Instance That Are Not Accessed Before Given Date
Jan 10, 2015Looking for query that lists all databases, in an instance, that are not accessed before a given date (e.g., not accessed before December 31, 2014)?
View 6 Replies View RelatedSQL Server Admin 2014 :: Leave DB In Restoring State After Attaching To Instance?
Apr 7, 2015Why do I leave my DB in Restoring State after attaching to the instance? Could not this fire a redo activity on Transaction Log?
Or, How does sql server undo all uncommitted transactions on active vlf during recovery?
SQL Server Admin 2014 :: Installing System Databases To A Non Default Drive?
Mar 25, 2015How can you install the System Databases to a drive other than the default?
I want the Data Files to be installed on D:MSSQLData and the log files to be stored on D:MSSQLLog.
For better, quicker answers on T-SQL questions, click on the following...
[URL]
For better answers on performance questions, click on the following...
[URL]
SQL Server Admin 2014 :: Calculating Average Read / Write Latency Across Instance Using Counters
Apr 27, 2015How you would calculate the average read/write latency experienced by a SQL Server instance during a specific time window in order to monitor this for multiple instances. From this MSDN blog, I know that you have to take multiple samples and do some calculations to get the correct latency.
[URL] ...
However, the SQLServer:Resource Pool Stats object tracks these numbers per resource pool and we want to get one number for the whole server. Since there can be a different base value for each resource pool, you can't simply sum the numerator values together. Here's some sample data from a server that illustrates the problem.
object_name counter_name instance_name cntr_value cntr_type
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) default 307318919 1073874176
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) Base default 25546724 1073939712
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) internal 2045730 1073874176
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) Base internal 208270 1073939712
I'm thinking I would need to do some sort of weighted average, but I'm not sure if that will result in the correct value. Here's the formula I am thinking about using currently before doing the calculation over time
((default * default[base]) + (internal * internal[base]))/(default[base] + internal[base])
Then to do the calculation over time, I'd use the changes in the calculated numerator and denominator to get the average.
Does this sound like to correct way to get this value? Is there a good way to verify?
Is Using A Named Instance Better Over Using A Default Instance??
Jan 17, 2007If you were asked to install SQL 2005 on a machine, would u install a default instance or a named one? And why would u choose one over the other?? Also, r there any issues with using a default instance?
Thank you for all your help.
How To Identify Instance - Default Or Named
Oct 7, 2015How to identify an instance - default or named ?
Is there any parameter or any where in properties sql server show as 'Named' or ' Default'.
or
if SELECT SERVERPROPERTY ('InstanceName') result is blank, then can we assume it is a default one ?
AlwaysOn Setup Between Default And Named Instance?
Aug 25, 2015Though to setup Alwayson, it is necessary to have both SQl Instances to be in same version, same database file path , etc.But, is this possible to setup the AlwaysOn between a default and a named instance?
View 1 Replies View RelatedDB Engine :: Difference Between Default And Named Instance?
Jul 28, 2015why we will go to install named instance as we having default instance already installed. Is there any advantage of named instance.
View 6 Replies View RelatedDefault Versus Named Instance With Custom App
Aug 2, 2007
Are there some general recommendations/guidelines/best practices for choosing to run your custom application against a default or named instance of SQL Server?
We have an application, which in it's stand-alone/local configuration, installs an MSDE default instance if it does not already exist, and runs against this instance. In addition, regardless of whether or not it installs the default instance, it expects to run against the default instance.
We are looking into migrating to SQL Server 2005 Express (Compact almost fits our needs, but not quite), and would like to pay more attention to the best solution regarding the use of instances, default versus named.
Thanks