Whenever I am doing reinitialization, publisher table schema is applying at subscriber level
I don't want to apply all changes ...
How can I skip the schema changes for transaction replication ...
We have two SQL Server 2005 production DB at remote sites. Due to network bandwidth issue, we need to replicate these DBs (publishers and distributers) to central corporate SQL 2000 DB (subscriber for backup and possible reporting (and in rare case as a failover server).
We would start out with backup from SQL 2000 db restored on remote SQL 2005 DBs. When we have DB issue on remote 2005 DB, we want to restore it from central corp. 2000 DB backup. Since two DBs are replicating to central DB, we DO NOT want combined db back up data on restored remote 2005 db. We can restore the db and delete unwanted data before we turn on replication from this restored server. So, this is not a problem.
The real problem is how to avoid snapshot replication (during initialization) when we create a transaction replication on this restored server to avoid over writing data on the central subcriber sql 2000 DB???
HELP!!
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
View 8 Replies View RelatedHow do I grant a specific access to a schema. I have a request to grant a ddl access to a schema called Business_Banking.
View 1 Replies View RelatedI am trying to copy the table data from db to another db, because some tables has XML column with a schema collection, I would like to get difinition of the XML schema collection and create it on the target db, otherwise I will get below error:
Xml columns cannot refer to schemata across databases.
My plan is for those tables with xml column with schema collection, I will:
1. Get all tables/columns that requires xml schema
SELECT t.name AS table_name,
SCHEMA_NAME(t.schema_id) AS schema_name,
c.name AS column_nam,
c2.name
FROM sys.tables AS t
INNER JOIN sys.columns c ON t.OBJECT_ID = c.OBJECT_ID
inner join sys.xml_schema_collections c2 on c.xml_collection_id = C2.xml_collection_id
2. Get table definition
DECLARE
@object_name SYSNAME
, @object_id INT
, @SQL NVARCHAR(MAX)
SELECT
@object_name = '[' + OBJECT_SCHEMA_NAME(o.[object_id]) + '].[' + OBJECT_NAME([object_id]) + ']'
, @object_id = [object_id]
FROM (SELECT [object_id] = OBJECT_ID('TableName', 'U')) o
[code].....
3. Get XML Schema definition
4. Combine 2 and 3.
5 insert into newtable select .... cast(xmlColumnas xml) from OldDB.dbo.oldtable
I am stuck at step 3 now....
How can I easily identify who dropped a table?
View 8 Replies View RelatedIs there a formula for calculating how expensive a transaction will be in terms of disk space used before its run. I dont want it accurate to the MB, but rough enough so I can determine how much additional space to assign to a transaction log or SAN volume.
Currently we're reindexing ~25billion rows, nothing too wide, say 12 columns consisting of 1 varchar(50) and the rest ints, bits and money.Roughly speaking if I reindex the clustered index on an int indetity, (with sort_in_tempdb) how would I calculate the the disk space used?
I have a database that is part of AlwaysOn that is filling up the transaction log drive even though I have a daily full backup and transaction logs set for every 2 hours. The backups are going from both the primary and secondary replica backuping up to the shared disk and I have the backup preferences set to the primary.
When I try to shrink the log I get 'The transaction log for database 'DB' is full due to 'LOG_BACKUP''. I have to manually backup the trans log and then shrink, why the maintenance plan backups aren't doing this even though they are "working".
I have this command :
Exec 'update .... insert ..... delete ..... insert ...'
I Execute these command in one execution.
exec ('...')
Are these commands act as a transaction? If one of them create error , another commands run or rull backed?
We have multiple databases on a single instance in an OLTP environment. I have my data files on a separate SAN LUN from my transaction log files (and a few NDFs split out onto additional LUNs). I was wondering if there is a performance benefit to putting each LDF file on its own LUN? Or at least my few busiest LDFs?
We are currently on 2012, but I'm having to put together specs for a 2014 installation and need to answer this question without having an environment in which I can benchmark different setups. I just want to hear whether or not others have done this (why or why not?).
I'm working on a large scale project that is currently in production. We have a big process that recently changed to use In-Memory Tables with SQL 2014 for performance efficiency.
The Process uses:
51 In-Memory SQL Tables.
50 Stored Procedures (not native) that loads data(Insert) from about 150 regular Tables and IM tables.
300 Validations (short stored procedure not native) Selecting from those 50 In-Memory Tables (And insert to In-Memory table that save the validation errors if exists on In-Memory table).
At the end of this process we clean the table from the data that relavnt to etch prosses(DELETE FROM WHERE)
B.T.W
No UPDATE STAT on In-Memory are used-when we test the prosses it slow as down and cause some locks.
We are calling this process from ADO.Net, loads stored procedure first and then validations, each SP use different SQL Connection. In normal use, everything works fine and takes about 1.5 second.
Under stress test (6 Clients X 100 Tasks) for 30 minutes. After several minutes we are starting to get this SQL Exception (1 SQL Exception for every 20 tasks):
41301. A previous transaction that the current transaction took a dependency on has aborted, and the current transaction can no longer commit.
Transactions in Memory-Optimized Tables
The Exception is not clear. We are not using BEGIN TRANSACTION in the process. The SQL Exception occurs in different stored procedures each time.
Is there anyway to execute script automatically on publisher after initialization. does sp_addscriptexec execute script on subscriber only??
View 2 Replies View RelatedWe have installed 2014 sql server. We have currently 2008r2. We have to run the real time report. So we need to set up transactional replication b/n those two servers. We need to use 2008r2 as publisher and 2014 as subscriber.
Is it ok to have subscriber higher version than the publisher?
Any experience of success or failure setting up CDC on the subscriber end of transactional replication?
Also for a bonus answer, why are explicit index operations not permitted (I'm assuming this is even on the publisher?) From BOL:
• Explicitly adding, dropping, or altering indexes is not supported. Indexes created implicitly for constraints (such as a primary key constraint) are supported.
I have created a publication on SQL 2014 SP1/CU1 it is going to a distribution server also a SQL 2014 database. The subscriber is also SQL 2014 SP1/CU1. When I set it up there are no errors. I fire up Replication MGR and it looks good after the snapshot and distribution agent have been started. Again, no errors. When I do a tracer token the information gets to the distributer in 1 - 4 seconds but it never gets to the subscriber, the tracer token monitoring screen only shows pending for distributor to subscriber.
I can upload the scripts used to create the publication and/or the subscription but am a little hesitant because of server names in the scripts.
Running Frequently Transaction logbackup during Integrinty check DB /optimization job will cause any issue /impact as duration will extend ...
View 2 Replies View RelatedI've recently started working with a public sector organisation who have 4 clustered sql instances that has 80% of it's db mirrored.
Looking at the transaction log - it seems that a transaction log backup is a good idea as the log is 4x larger than the data file.But I'm not allowed access to the physical server to check onto which drive I can create the trn. No RDP, no vmware - let's be honest I'm not even allowed to launch cmd line Also the Server Manager informs me "We will need to carefully look at database backups if you guys want to start doing these backups on box, as that will break our off box backup routine (it will screw the transaction chain)."
I don't understand how backing up the transaction log could break the "transaction chain"?
We had an issue recently where a (transactional) replicated table was replicating data as expected.
Then about 30 or so rows in the source table were not in the destination table, but other rows created after those 30 rows were replicated.
We have pretty much confirmed that users did not delete those rows.
Unfortunately we had to resolve the issue quickly and so blew away & recreated the subscription so a lot of evidence is probably gone from the crime scene.
We cant figure out what could cause 30 rows not to be replicated, yet leave replication operational.
We have push transaction replication from A database to 2 other B and C database. I have configured email to sent upon failure of subscription job of B and D database on Database A. Is this the way that we need to configure email to send when there is replication break up or failure.
Database is MS sql server 2008 R2
Publication Database: A
Replication mode : Transaction Replication
Replication used : Push Replication from database A
Subscription Database: B and C
We have transaction replication configured across multiple SQL instances and could find one of the replication (from publisher to subscriber) net transport sessions is happening via Named pipes rather than TCP. where to troubleshoot this issue and what action to be taken to make it happen via TCP.
View 0 Replies View RelatedI am planning to have AlwaysON Availability Groups setup between Server 1 and Server 2
Server 1 -->Publisher-->2014 SQL Enterprise edition-->Windows Std 2012 --> Always on Primary Replica
Server 2 -->Publisher(when DR happens)-->2014 SQL Enterprise edition-->Windows Std 2012 --> Secondary Primary
Server 4 as Subscriber
Server X as Remote Distributor ..
If i create Publications on Server1 (primary replica) to subscriber 4 servcer, will the publication be created automatically in Secondary Replica Server2 ? or do i have to create manullay using GUI/T Sql on Both Servers?
if for any reason AG fails over to async node, how replication behaves? As data will not be in sync with previous primary replica, how replication will work? I think that we have to reset replication from scratch as there's a high chance subscribers might be more updated than current primary replica as failover to this node causes data loss. How to keep replication in sync without resetting up? Can we achieve this?
View 5 Replies View RelatedFrom distribution db, which table(s) store info about filtered data?
View 0 Replies View RelatedReplication-Replication Distribution Subsystem: agent PRODDATA6 failed. Could not find stored procedure 'sp_MSdel_dboActiveTask_msrepl_ccs'.
Replication-Replication Transaction-Log Reader Subsystem: agent PRODDATA6. The process could not execute 'sp_replcmds' on 'PRODDATA6'.
Replication-Replication Distribution Subsystem: agent PRODDATA6. Could not find stored procedure 'sp_MSupd_dboActiveTask'.
Looks like these sp's got deleted?
As per attachment, i have been created replications but in local subscription it is not populated any thing at the same time, Subscription database has been created but tables is not populated as per publication table.
View 2 Replies View RelatedIs it possible to configure transnational replication between two different domains also non trusted domains.
It's possible means what i need to take care before configure replication and how to configure transnational replication between two different domains.
I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
I inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
I want to use BCP to load data from a text file.
By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.
bcp aborts if ANY of the rows contains a FK violation. No data get loaded.
So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.
I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?
If I install an instance with Windows Only authentication, and then change it to Mixed Mode, if I enable the sa login, the password has already been set. What is the default? If it's generated, how secure is it? Is the password generated? What algorithm is used for that?
View 9 Replies View RelatedMy sql databases in SQL Server 2014 has the status "suspend" as I saw in SQL Management Studio. I can't restore to serviceable condition sql databases through standard procedures. I need to restore .mdf file.
View 9 Replies View RelatedI am using a monitoring system where I can monitor a numeric SQL result assuming the result is one field and one row.I would like to do this to say monitor the free available space or percentage on say the Master database. DBCC SQLPERF gives me a few columns and results for all databases on the server.
View 2 Replies View RelatedIn our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?
View 1 Replies View Related