SQL Server Admin 2014 :: Table Does Not Exist - Error Occurred When Loading The Model
Jul 22, 2014
The error is "The table with Name of 'Table Name' does not exist.An error occurred when loading the Model."
We get this error when we try to check the properties of an analysis server using SQL Server Management studio. We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1
View 0 Replies
ADVERTISEMENT
Aug 26, 2013
I try to load data into a memOpt table (INSERT INTO ... SELECT ... FROM ...). The source table has a size about 1 Gb and 13 Mio Rows. During this load the LDF File grows to size of 350 GB (until the space if the disk is run out of space). The Server has about 110 GB Memory for the SQL Server reserved. The tempdB doesn't grow. The Bucket Size in the create statement has a size of 262144. The Hash key as 4 fields`(2 fields have the datatype int,1 has smallint, 1 has varchar(200). ) The disk for the datafiles has still space for the datafiles (incl. the hekaton files).
How can I reduce the size of the ldf files during the load of the data ?
View 9 Replies
View Related
Apr 17, 2015
I have made a clean install of SQL 2014 including MDS on a server with Win Server 2012 R2.
After the installation I cant create new models because on an error saying that "Must declare the scalar variable "@Version_Id". "
I can see that the tables gets created in the MDS database but the models dont show up in the web interface.
I get the same error message when I try to deploy an old model.
View 0 Replies
View Related
Dec 23, 2014
is bulk logged recovery model support point in time recovery
View 9 Replies
View Related
Jun 10, 2015
Here is my table:
My question is: How can I insert a row for each unique TemplateId. So let's say I have templateIds like, 2,5,6,7... For each unique templateId, how can I insert one more row?
View 0 Replies
View Related
Aug 24, 2015
I am new in SQL Server, What to check ,what action do i need to take while adding a new column to a table.
View 5 Replies
View Related
Jun 21, 2015
Previously same records exists in table having primary key and table having foreign key . we have faced 7 records were lost from primary key table but same record exists in foreign key table.
View 3 Replies
View Related
Jul 16, 2015
I have a SQL Server 2014 instance running on a SQL Server 2008 R2 server. The server is not clustered, it is just a stand alone SQL Server. The syspolicy_ purge_history job fails every now and then with the error message: "A job step received an error at line 1 in a PowerShell script. The corresponding line is 'import-module SQLPS -DisableNameChecking'. Correct the script and reschedule the job. The error information returned by PowerShell is: 'Access to the path 'PowerShell_CommandAnalysis_Lock' is denied. '. Process Exit Code -1. The step failed."
Google isn't bringing up much besides the whole"If this is a clustered server make sure you have the right server name in the command" answer, which isn't the case here. Some days this job fails and some days it succeeds. I have checked out task scheduler to see if there were any conflicts there, found nothing. Nothing in the event viewer either.
View 2 Replies
View Related
Aug 18, 2015
I am trying to create a job that runs against my High Availability listener server.
It is a fairly simple SQL statement in the job - execute tsql.
When I try and run the job I get the error:
Executed as user: NT SERVICESQLAgent$SQL2014A. The target database ('BB_Prod') is in an availability group and is currently accessible for connections when the application intent is set to read only. For more information about application intent, see SQL Server Books Online. [SQLSTATE 42000] (Error 978). The step failed.
I thought there was a way to run a select statement as a job against the listener? The tsql step is only a select.
Is there a way to pass in the application intent = readonly as part of my SQL statement?
View 2 Replies
View Related
Oct 29, 2015
I have an environment with MS-SQL Server 2014 and always-on availability group configured (on 2-nodes).
I'm writing a Powershell Script which removes the database from the availability group (on the primary server) and then SHOULD drop the database on the secondary Server.
That works most of the time, but not always...
When it fails I get the error message:
Cannot drop database "Customer_2" because it is currently in use.
When i check the secondary DB-Server (sp_who2) while the script is running, i see that there is a process for the DB "Customer_2" with Status="background", Command="DB STARTUP" and LastWaitType="REDO_THREAD_PENDING WORK".
As soon as the script fails, this process for "Customer_2" disapears.
This happens always only on the second database in the availability group.
Why is the process still there, even after I removed the database from the Availability Group on the primary node.
If I remove the database from the availability group manually, the "background" process on the secondary node for that database disappears..
[URL]
View 4 Replies
View Related
Aug 9, 2014
how to take backup of indexes for a particular table.
View 1 Replies
View Related
Aug 9, 2014
How to take backup of indexes for a particular table.
View 5 Replies
View Related
Jun 8, 2015
I'm having problems with the following code:
--DROP MASTER KEY
--GO
USE master;
CREATE MASTER KEY
ENCRYPTION BY PASSWORD = 'Pass@word1';
GO
USE master;
[code]....
What am I missing? What do I have to do if I get in a situation where I need to back out and start over?
[URL]
View 9 Replies
View Related
Jun 30, 2015
I'm getting a replication error that an object (Table) was not found. Any script that can capture this information?
View 3 Replies
View Related
Oct 14, 2015
I'm being asked to create multiple filegroups for a new database based on the table type, transaction, lookup, misc... From what i'm reading this doesn't make sense. I'm reading either large tables get file groups, nonclustered indexes when they are about the same size of the data, or a few other reasons...
First of all, we are talking about the same disk (please don't ask me about how it is configured) and I'm not sure yet if restoring separate file groups is even going to be necessary.
So here are my questions (beyond, the test and see what happens) because in the end I'm going to probably have to do what i'm told. So this is for my professional knowledge.
1. Does file groups separated by table type make sense?
2. Should you put tables that are queried often together in the same or different file groups.
3. I'm pretty sure you can't restore single file group for write access, am I correct?
View 0 Replies
View Related
Aug 5, 2015
I have one excel sheet contains 50 sub sheets with different names on it. Is it possible can i load all sheets into SQL using SSIS?
View 2 Replies
View Related
Apr 17, 2014
We are in web site development company,Previously we don't have proxy configuration, after implementing Proxy , we have an issue to connect a remote database.
The error pops "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. Error 53".
View 1 Replies
View Related
Aug 10, 2015
I have been facing following Error in Failover cluster setup as below. I have prepared 2 node and 2 instance sql server failover cluster on top of windows failover.I have deleted MTCBJINS07 in AD and recreated even after, problem is not solved. MTCBJINS07 is my 2nd sql instance sql server network name.
Cluster network name resource 'SQL Network Name (MTCBJINS07)' failed registration of one or more associated DNS name(s) for the following reason:
DNS bad key.Ensure that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.
View 2 Replies
View Related
Aug 11, 2014
I am trying to replicate data from a view in the publisher to a table in the subscriber (transaction replication). I do not need the view's base table, or the view itself, replicated to the subscriber. I only want to data from the view to feed a table in the subscriber.
Is this possible?
Running SQL Server 2008 R2 Enterprise.
View 1 Replies
View Related
Dec 1, 2014
I have bunch of heap tables and the fragmentation seems to be high, i am not sure whether i shall add index for them, as these tables are inserted and updated every day.
View 4 Replies
View Related
Dec 12, 2014
With all the new functionality, can 2014 now restore a single table from a standard backup without using any third party tools? I have looked, but can't see this listed as a feature (though that doesn't mean it's not there, maybe I've just missed it).
View 6 Replies
View Related
Feb 4, 2015
I have a master table with after insert trigger on it.. When record is inserted into master table, the trigger fires and is captured in the backoffice table. In case the trigger fails, my record is neither in the master table nor in the back office table..
Is there anyway to capture the record either in the master table or in a separate table.
View 6 Replies
View Related
Jul 20, 2015
I am having an issue in determining the correct size of a table.
I have a tableA in some DB on transaction server (Enterprise Edition), this table is being replicated in reporting server DB (Standard edition).
When I check the space used by this table in both the databases i see noticeable difference.
I am using EXEC sp_spaceused 'tableA' to determine the space.
Transaction Server
------------------------------------------------------------------------------
name rows reserveddata index_size unused
TableA1439999 695416 KB507048 KB182912 KB 5456 KB
Reporting Server
-------------------------------------------------------------------------------
name rows reserveddata index_size unused
TableA1439999 656904 KB483664 KB172680 KB 560 KB
So I wanted to know what could be the possible reasons for this difference ?
View 5 Replies
View Related
Jul 22, 2015
I'm trying to find out what tables are being used in a Database.
I don't want the last User but the User and the Dates.
I have a script that return the last user but that is not going to work.
The following script returns the last user but not all users and the Login Name:
ITH LastActivity (ObjectID, LastAction) AS
(
SELECT object_id AS TableName,
last_user_seek as LastAction
FROM sys.dm_db_index_usage_stats u
WHERE database_id = db_id(db_name())
[Code] .....
View 2 Replies
View Related
Feb 14, 2006
Hello, I am using SQL Server 2005, and trying to load a mining model : microsoft association rules through a VB.net.
When it is loading, this error msg displayed :
"An error was encountered in the transport layer. The peer prematurely closed the connection."
Any help is really appreciated.
Thanks a lot,
Mita
View 8 Replies
View Related
Oct 8, 2015
We have always on setup in our environment with read only replica. The primary database has 2 schema one is a dbo and other xyz. We have some store procs created in dbo schema and xyz schema. These store procs are being used by SSRS reports to retrieve the data (select only) no data changes will be made.
when we run the store proc from the read only server the storeprocs in the dbo schema run fine but xyz schema are failing with the message saying failed to update the database as this is a read only...
View 1 Replies
View Related
Oct 12, 2015
I am working on adding DBs to the AG but for some reason I am getting this error.
"Joining DB on secondary replica resulted in error"
Msg: The remote copy of the database is not recovered far enough to enable DB mirroring or to join AG. Missing log records have to be applied to the remote DB by restoring the current log backups" Which I did. I took the log backup of DB1, restored it on DB2 with no recovery, but still I am getting the same error.
View 3 Replies
View Related
Jun 9, 2014
I want to generate dynamic temp table so, from one strored procedure am getting an some feilds as shown below
CM_id,CM_Name,[Transaction_Month],[Transaction_Year],''[Invoice raised date],''[Payment Received date],''[Payout date],''[Payroll lock date]
for i want to generate table for the above feilds with datatype
View 5 Replies
View Related
Jun 10, 2014
I have created a stored procedure for retrieving column name, as shown below
CM_id, CM_Name, [Transaction_Month], [Transaction_Year], [Invoice raised date],[Payment Received date],[Payout date],[Payroll lock date]
Now I am trying to create a temporary table using the above generated coluimns from Stored Procedure with datatype.
View 3 Replies
View Related
Apr 8, 2015
I need to do some operations on a table when any user dont work with it.How do i do it?Do i lock the table? and is it possible?
View 8 Replies
View Related
Jun 25, 2015
I have a job scheduled that imports a table from a Oracle database. The job runs at 3am and reports success. But for some reason when i query the table to see how many records there are, I see the same row count as the day before (it should increase everyday- student enrollment). When i execute the package manually, the table updates fine.
SQL Server 2014/Win7 x64.
View 7 Replies
View Related
Jul 30, 2015
I know select * into ##tmp1 should work but I get a database connection error.
View 9 Replies
View Related
Sep 9, 2015
In the Operating environment databases, may be made tables in the database on a temporary basis but they are still yet and they are not removed, how to identify tables that have been made on a temporary basis are not used (don’t have any read & write records)?
View 4 Replies
View Related
