I have a SQL server box running 2014 reporting services. I have another server running IIS v8.
I would like to be able to connect to the IIS site and be given the SSRS report browser.
So externally if I browse to [URL], I am presented with the report server interface, the same as if I browse to http://xxx.xxx.xxx.xxx/reports internally.
I've got reporting services on a different box from the database and I can see all the reports, but when I try to setup a subscription, I get this weird error:
The SQL Agent service is not running. This operation requires the SQL Agent service. (rsSchedulerNotResponding)
The same error happens when I connect to the database server via management studio and try to run a job.
I've migrated a server with SQL Server 2008R2 and Reporting services into a new box with SQL Server 2014, but forgot to change the timezone to the correct one. I've changed it later, but it seems like the reports are running by the old default timezone. The schedule says that the report should run at 6:30am, but the Last Run column shows 8:30 PM.
I need to fix it without manually updating each subscription with some date/time conversion.
When I try to install sql server 2014 on my machine,all the features were installed but except Reporting services-Native and error occurred as shown below.
Error details: ยง Error installing SQL Server Reporting Services Updating permission setting for folder 'C:WindowsTemp' failed. The folder permission setting were supposed to be set to 'DA;OICI;0x1200af;;;S-1-5-80-4063824523-3130906261-2263067808-2545249320-213050741)'. Error code: 0x84CF0003
I am running into a weird issue with a new SQL Reporting Services 2014 server I built. I installed SQL Reporting 2014 on Windows Server 2012 R2 and configured Kerberos, but the site is extremely slow. After some reconfiguration and log captures I have determined the issue has to do with the Kerberos setup, however I am running a similar configuration with SQL Reporting Services 2008 on Windows Server 2008 R2 and do not run into the same errors.
The error I see while using Wireshark is KRB Error: KRB5KDC_ERR_BADOPTION NT Status: STATUS_NO_MATCH. When I drill down the into the error I can see the kerberos string is testprjmnmtreports14.company.com, which is the URL we are using to access the site. I made sure to add that name as an SPN for the service account that is running SQL Reporting Services, however I still receive the error.
Then I tried configuring the site to run without a hostheader, so I accessed the site with the server name, ECTSTSQLRS5, and the site works perfectly fine, no errors are reported either. So it seems I have isolated the issue down to Kerberos but I am not sure how to resolve it. Here is some more information about my environment:
DNS/URL used: testprjmnmtreports14.company.com Server Name (FQDN): ECTSTSQLRS5.company.int AD Domain Name: company.int Server Version: Windows Server 2012 R2 AD Functional Level: 2008 R2
As you can see I am trying to use a .com address but my AD domain is .int which I think is the issue, but I do not have the same problem on my other server that is running Windows Server 2008 R2. What do I need to do to allow my new site on 2012 R2 to work with this DNS Alias?
Is it possible to have Analysis Services in both modes or are they mutually exclusive?I have a machine setup with Multidimensional AS and would like to know if it's possible to add a Service in Tabular mode.
I would like to setup replica for one of the databases for reporting. The current environment is a 2 node cluster(active/passive). I would like to add a 3rd node that can server as a secondary replica. The secondary replica will be on asynchronous commit mode.
The database that needs to have alwayson setup has column level encryption enabled.
Other Questions,
* Do I need to backup and restore the service master key on secondary server in order to have the column level encryption to work on secondary server? * What would be preferred Quorum settings? * What is the setting for 'readable secondary' for primary and replica db? * What should be the setting for 'Connections in Primary Role' for primary and replica db? * We are trying to setup without a Listner. Do I need to setup AG Listener? Can the application exclusively use the [secondary instance name].[replica DB name] without a listener?
We have a 2 node clustered instance(SQL 2014) with 26 databases and we would like to enable alwayson for one of the databases for reporting (only one secondary and do not need high availability setup). I'm thinking if the reporting application/queries can explicitly connect to the secondary database(Instance namedatabase name) without using a listener and setup the secondary in asynchronous commit mode. Read about the REDO thread blocking due to reporting workload. How does this affect if I implement the secondary in this way.
We have run into an issue on a dedicated SSAS 2012 SP1 server where the allocated memory is not being utilized, causing some slowness in use, connections, and queries.
Total Memory on the server is 512, and after startup, the utilized memory gets up to a max of 60GB and stops there. Checking the Resource Monitor, msmdsrv.exe is only taking around 39GB overall. With the current properties, that should be at 330GB. Am I missing something in the settings or in configuration that should be changed?
Version: SQL Server 2012 SP1 Enterprise (11.0.3000) OS: Windows Server 2012 Datacenter - Fully patched and up to date Databases: 2 Tabular models Server: 512GB RAM
I have a requirement to implement CDC for 50+ tables to implement incremental data changes warehouse/reporting rather than exporting the whole table data. The largest table is having more than half a billion records.
The warehouse use a daily copy of OLTP db (daily DB refresh). How can I accomplish this. Is there a downside in implementing CDC just for the sake of taking incremental changes on the tables?
Is there any performance impact if we enable CDC on OLTP db?
Can we make use of the CDC tables on the environment we do daily db refresh so that the queries don't hit OLTP database?
What is the best way to implement CDC to take incremental changes for reporting.
I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
I am trying to migrate my reports from SQL server 2000 reporting services 32bit to 2005 64bit. I am following the migration steps that MS specified. Restored my Reportserver and ReportserverTempDB databases Then I was using the configure Report services to upgrade these databases but I always end up getting the follwoing exception when I run the upgrade on the "Database Setup" configuration for 'ReportServerTempDB' database System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database 'ReportServerTempDBTempDB'. No entry found with that name. Make sure that the name is entered correctly. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Common.DBUtils.ApplyScript(String connectionString, String script) at ReportServicesConfigUI.SqlClientTools.SqlTools.ApplyScript(String connectionString, String script)
It's driving me crazy, why is it looking for 'ReportServerTempDBTempDB' in the catalog instead of 'ReportServerTempDB'? Is it possible to migrate from 32bit to 64bit?
I am asking about a virtual IP for SQL Server, is there a way we can assign a different IP to SQL Server other than the server's(host) IP address? like the same what we do in a clustered env.
I've recently started working with a public sector organisation who have 4 clustered sql instances that has 80% of it's db mirrored.
Looking at the transaction log - it seems that a transaction log backup is a good idea as the log is 4x larger than the data file.But I'm not allowed access to the physical server to check onto which drive I can create the trn. No RDP, no vmware - let's be honest I'm not even allowed to launch cmd line Also the Server Manager informs me "We will need to carefully look at database backups if you guys want to start doing these backups on box, as that will break our off box backup routine (it will screw the transaction chain)."
I don't understand how backing up the transaction log could break the "transaction chain"?
We are trying to create some alerts in our SQL Server 2014 BI edition.Issue is that, after I chose "Type" as "SQL Server performance condition alert" nothing is listed in the "Object" list box.SQL Server event alerts are working. Issue is only with "SQL Server performance condition alert".
I Run All checks for Validation cluster.I get Error On Disk Lists And Validation failed.With This error : Failed to prepare storage for testing on node "server name" The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.
We recently had a problem with DB Mail. SQL jobs that sends an email succeeded but the email in the job fail to sent. There was a problem with the email server. The error is included. We fixed the problem with the email server. How can I get an alert when a DB Mail email fails send?
Date4/23/2015 10:01:06 AM LogDatabase Mail (Database Mail Log)
Log ID5907 Process ID13204 Mail Item ID5702 Last Modified4/23/2015 10:01:06 AM Last Modified Bysa
Message The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2015-04-23T10:01:06). Exception Message: Cannot send mails to mail server. (Insufficient system storage. The server response was: 4.3.1 Unable to accept message because the server is out of disk space.). )
We have oracle linked server created on one of the sql server 2008 standard , we are fetching data from oracle and updating some records in sql server . Previously its working fine but we are suddenly facing below issue.
Below error occurred during process .
OLE DB provider "OraOLEDB.Oracle" for linked server "<linkedservername>" returned message "". Msg 7346, Level 16, State 2, Line 1 Cannot get the data of the row from the OLE DB provider "OraOLEDB.Oracle" for linked server "<linked server name>".
I want two write a small script to determine which is the currently active (primary) server in the AG.
Right now, I see that using SELECT * FROM SYS.dm_hadr_availability_replica_states I can determine the role. However, when the server goes down and switches to the secondary node, I don't believe that the role changes (or does it?). How do I determine which is the active node?
We are consolidating some old SQL server-environments from 'OLD' to 'NEW' and one of our vendors is protesting on behalve of the collation we use on our 'NEW' SQL server.
Our old server (SQL 2005) contains databases with collation SQL_Latin1_General_CP1_CI_AS
Our new server (2014) has the standard collation Latin1_General_CI_AS
Both collations have CI and AS
From experience I know different databases can reside next to eachother on the same Instance.
The only problem could be ('could be !!') the use of TempDB with a high volume of transaction to be executured in TempDB and choosing for Snapshot Isolation Level ....
The application the databases belong to is very static, hardly updated, and questioned only several time per hour (so no TempDB issue I guess).
using different databases using a different collation running on the same instance?
I need to do testing on capturing connection coming from outside using Profiler. Basically I need to do something from other SQL servers connecting to this SQL server and test if it is captured by profiler.
I need some clarification about adding file in to mirrored dataabse in primary server without downtime and breaking the mirror server.
In our environment we are using monutdisks in both the servers. in primary for ex we have F drive for data files under mount disk 3 in mirror server also we have same drive but in mount drive2.
As per my knowledge if it is same drives we can add the ndf files in the primary that will reflect on mirror. but in current situation i am confusing about mount points with different names.
In SQL 2008 R2, if we clone an environment including SQL server, the maintenance plans retain a connection string to the source/original server they got cloned from and are not editable. But, I was able to use a work around by editing them in BIDS and saving them back on the server. But now with 2014, I am facing two issues:
1.I still can edit the package to correct the server connection, with SSDT; but the option to save back to the server is not available any longer!
2.I used to be able to see all my plans under SSIS in 2008 R2 but not in 2014 now. Although, they are listed in SSMS!
I'm looking for a way to list the target servers associated with a master server. The reason is that we're moving to another master server, and I'd prefer not to move the targets manually.
I've got most of the T-SQL already (sp_msx_enlist, sp_add_jobserver), but I'd like a scripted solution instead of a wizard.
I am setting up SQL 2014 always on. I was able to set up the replicas between 2 servers in the same subnet.Their IP addresses are say like this:
100.20.200.200 100.20.200.201
When I am trying to introduce another node into the cluster which has IP address like 100.10.101.102, I am getting an error that the server isn't reachable.
I use following trigger to stop user "smith" if he try to connect through SSMS to My Server:
create TRIGGER [trg_connection_MyServer] ON ALL SERVER WITH EXECUTE AS 'Smith' FOR LOGON AS BEGIN IF ORIGINAL_LOGIN()= 'Smith' begin if exists (SELECT 1 FROM sys.dm_exec_sessions WHERE (program_name like 'Microsoft SQL Server%' and original_login_name = 'Smith') ) ROLLBACK; end
I want to log this information or send emal incase, this user try to connect through SSMS, so that I can catch it. How can I do this, if I use insert command it rollsback everything and I can't do any activity.
I have an issue to restore an encrypted backup via GUI.I can restore an encrypted backup on another instance using t-sql command, but cannot do the same using the GUI of sql server 2014. The message error is: No backupset selected to be restored.I have restored the master key from the instance where the encrypted backup was created on the instance where I want to restore the encrypted backup, then restored the certificate. I managed to open the master key. I have the following versions:
On the instance where the encrypted backup is taken: Microsoft SQL Server 2014 - 12.0.2000.8 (X64) Feb 20 2014 20:04:26 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
On the instance where I'm trying to restore the bakcup via GUI: Microsoft SQL Server 2014 - 12.0.2000.8 (X64) Feb 20 2014 20:04:26 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: )
I have been tasked with auditing all DDL and selected DML events on a production server and logging them to a table. My solution is to use CDC for the DML and a Server-Level trigger for the DDL. Because there should never but much DDL activity on the server (except when performing update tasks) I don't need to worry about the trigger consuming too many resources.
My question is this: Is there any single specification such as DDL_LEVEL_EVENTS that can capture all DDL activity or do I need to specify each and every DDL action in the trigger?
I am playing around in a test environment with SQL Server 2014. I have a question about the default location of the report server databases when you have multiple report server instances installed on one server.
I did a very simple install of SQL Server 2014 with the database and Reporting Services in Native Mode (install only) features selected. Accepting the default locations, I ended up with the following locations as you would expect:
Running the Reporting Services Configuration Manager, I created the Report Server database. After creating the Report Server database, the related files will be located below in the SQL folder as I would expect.
Next I installed another instance, which I called Test, of SQL Server 2014 like I did above. I now have the following folder structure the Test instance as I expect.
