I have installed 2 node windows Fail-over clusters successfully. But QUARUM Configuration is not appearing in Failover cluster manager instead "Witness: Disk (Disk Cluster 4)". I have also configured quarum configuration from Quarum "Configure Cluster QUARUM Settings". I have attached the snapshots of windows cluster configuration. Is it the issue or not. I have not got any warning and error during cluster validation while installing Windows failover cluster. I am assuming it is okay and i can move ahead to installation of SQL Failover cluster setup.
Products used for installation in Virtual Machine:
Windows Server 2012 R2
SQL Server 2012 R2
Note: Service Pack is not installed.
1. Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk. 2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode. 3. after fail over done to 2nd secondary node what mode in production(readonly or read write). 4. how to rollback to production primary ,will change data in secondary will get updated in primary.
I have been facing following Error in Failover cluster setup as below. I have prepared 2 node and 2 instance sql server failover cluster on top of windows failover.I have deleted MTCBJINS07 in AD and recreated even after, problem is not solved. MTCBJINS07 is my 2nd sql instance sql server network name.
Cluster network name resource 'SQL Network Name (MTCBJINS07)' failed registration of one or more associated DNS name(s) for the following reason:
DNS bad key.Ensure that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.
I have 10 databases which are configured as principal in mirroring I need to failover all the databases as part of failover , instead of writing query each database as parner failover, is an script which will generate the databases as principal to failover ?
I have a windows 8 pc that I just got and installed sqlexpress 2014. My buddy haw windows 7 and installed sqlexpress on his pc. We create a db on his pc, did a backup, copied the backup to my pc. In ssms I right click on "database" > restore database. click device and the button to find my file. I navigate to the folder where the file shows in file explorer but the .bak file does not show in ssms to restore from. This is probably a windows thing but I have don't know what to look at.
We are not able to failover the AG to secondary replica. The process gets timed out and AG goes to resolving mode. Had to reboot the box in order to switch the AG back to primary node. We even rebuilt the whole AG from scratch but the issue remains.
Failed to bring availability group 'xxxx' online. The operation timed out. Verify that the local Windows Server Failover Clustering (WSFC) node is online. Then verify that the availability group resource exists in the WSFC cluster. If the problem persists, you might need to drop the availability group and create it again. [SQLSTATE 42000] (Error 41131). The step failed.
Recently after turning on trace I restarted the sql services on a box which is configured for automatic failover availability groups. The ag has not failed over to other node. The other node was in resolving state. When the restarted server is back, the AG went back to that server. I checked the sys.availability groups field for failover property failure condition level, it's set to 1 which means service restarts should initiate the failover.
-MS Server 2012 R2. -SQL 2014 EE. -All windows updates. -Clean install of both OS and SQL, all 3 nodes are identical. -SQL Server is running on an alternate port, which I've opened in the firewall. Connections from all network locations are working swimmingly; including connections between all 3 nodes. -I've got the groups up and running; Listener is set up correctly. Connections work great. -One node is synchronous, one is asynchronous. Both show synchronized, and synchronizing respectively. -Data added at the primary node is moved across to all 3 with lightning speed.
When I attempt a manual failover it hangs..and hangs...then pops up an error 41131 and rolls back the failover. Leaving the cluster perfectly intact and working just as it did prior to the failover attempt. What I've checked so far:
-There is absolutely NOTHING in the cluster events log. -Windows event log shows no errors, just the standard stuff of the primary nodes state changing from primary to resolving and then back again. -SQL Event log has a few things in there, but nothing that's leading me to a solution, I've attached the log from start to finish on an attempted manual failover:
Is there any single TSQL query which provides below info.When did my AlwaysOn Availability group failed over and from which node it failed to which new node(i.e. replica)?
if for any reason AG fails over to async node, how replication behaves? As data will not be in sync with previous primary replica, how replication will work? I think that we have to reset replication from scratch as there's a high chance subscribers might be more updated than current primary replica as failover to this node causes data loss. How to keep replication in sync without resetting up? Can we achieve this?
We had to failover our primary db server for maintenance to our secondary replica. The primary was rebooted during maintenance. We failed back after the maintenance and one of the databases is not synchronizing.
I checked sys.dm_hadr_database_replica_states, and it is showing that it is INITIALIZING.
It has been in this state for more than 45 mins now. The last_sent_time, last_received_time, last_hardened_time and last-redone_time are all stuck with a time stamp 45 mins ago.
They haven't changed. How do i resume this database and bring it back in sync?
I tried suspending and resuming the data movement, but hasn't worked.
I have a 2 node cluster with 2 standalone 2k14 instances having alwayson setup. As per client requirement we have created a client access point with a cname alias in dns to connect to secondary replica. Now, everytime whenerver the roles switch over one has to manually move this resource from the previous secondary node to the new secondary node. This is tedious, and should not be done manually either, so I am looking for a way to automate it so that as soon as the role switches over, the resource group after some time should also switch over to the current secondary.
I am running SQL 2014 2-node AlwaysON Availability groups, Enterprise Edition in our environment and 5 databases are part of AG.
Question is, sometimes AG is getting failed over to node2 but always our preferred node is node1 due to some business needs otherwise some of our jobs will fail.
So, what I looking for is, a sql script which can handle a situation wherein, for some reason, AG is failed over to node2, it should be able to detect if node1 is back online or not and if so, it should fail back to node1. How to do this using tsql query or stored proc or sql agent job ?
Dead lock is coming in select query in application because of index. It is identified after enabling trace in database and identified by reading deadlock xml file. After index removal, deadlock is not coming in same query. But it is affecting query's performance slightly. Is it correct way to remove index if dead lock is coming because of index?
We had a big issue today during maintenance work in our SQL environment.
So our environment: - 2x SQL Server 2014 Enterprise on Windows Server 2012 R2 (SRV1 and SRV2) -- Both Hyper-V VMs on different Hosts -- Both configured to an Windows Failover Cluster and AlwaysOn Availability Group (AG1) -- AG Listener: AG1_lis -- No shared storage (each Hyper-V Host has its own local storage) -- Asynchronous Mode -- SRV1 is primary, SRV2 is secondary SQL node
What happened? - Shutting down Windows on SRV2 due hardware maintenance - Cluster goes offline, AG1 goes offline -- Error message: "Stopped listening on virtual network name 'AG1_lis'." -- Error message: "The availability group database "DatabaseXY" is changing roles from "PRIMARY" to "RESOLVING" because the mirroring session or availability group failed over due to role synchronization."
Results? - AG1_lis wasn't available for our applications and they stopped working properly because database connection was lost!
I think, I HOPE, this is not the normale behaviour when one node is shutting down (especially the secondary node!)
We have a SQL 2014 active passive cluster with 5 instances. When the cluster was installed one of the nodes was a virtual machine. As we started to have problems and this is not a Microsoft supported configuration we decided to replace the virtual node with a phyiscal one. On 3 of these 5 instances we configured static ports (1433 TCP) this was required for applications and firewall implementation.
Now with the physical node joined to the cluster we have issues with these three instances. Whenever one of these instances is moved to the passive node the server authentication is changed from mixed to windows only. I'm no SQL expert at all but to me it looks like the configuration of the instances are not replicated to the passive node? I found some similar problems on the net but these are mostly under sql 2008.
Due to a SQL 2014 cluster installation failure related to security while setting up the primary node, I had to remove the node and any related installation programs from the node and redo the installation again. However I am unable to use the machine name as the SQL network name during the instance configuration, I get the following:
Microsoft.SqlServer.Chainer.Infrastructure.InputSettingValidationException: The SQL Server failover cluster instance name "MachineName" already exists as a server on the network. Specify a different failover cluster instance name.I am still getting the same name since the node name "MachineName" is listed under the cluster name. I have used machine name as SQL network name without an issue. I do not have any existing SQL machine name in network using same machinename which I want to use for this installation.
I have configured windows failover clustering 2012 on 4 of my test nodes.
I am trying to add another node into this cluster but its not happening. I am not even able to start the cluster service in services.msc
After installing windows failover clustering, when I go to the C:WindowsCluster folder, I am unable to find CLUSDB, CLUSDB.1.container, CLUSDB.2.container and CLUSDB.blf files in the folder.
These files are very much present on the other nodes where cluster service is running.
I tried copying these files manually to server where its missing but still no luck.
I am asking about a virtual IP for SQL Server, is there a way we can assign a different IP to SQL Server other than the server's(host) IP address? like the same what we do in a clustered env.
I am setting up SQL 2014 always on. I was able to set up the replicas between 2 servers in the same subnet.Their IP addresses are say like this:
100.20.200.200 100.20.200.201
When I am trying to introduce another node into the cluster which has IP address like 100.10.101.102, I am getting an error that the server isn't reachable.
NODE1 -256GB INST1 - 64GB min/64GB max INST2 - 64GB min/64GB max NODE2 - 256GB INST3- 64GB min/64GB max INST4- 64GB min/64GB max
With this configuration and if all instances are running on the same node there will be enough memory for them to run. Knowing that normally i ll have only 2 instances in each node wouldnt it be better the following config?
NODE1 -256GB INST1 - 64GB min/128GB max INST2 - 64GB min/128GB max NODE2 - 256GB INST3- 64GB min/128GB max INST4- 64GB min/128GB max
With this configuration and in case all the instances (due to a failure) start running on only 1 node, SQL will adjust all instances to just use Min memory specified?
We have a SQL 2014 AlwaysOn availability group running on two Windows 2012 R2 servers that are in the same subnet. We created a new server in a second subnet, installed SQL, joined the server to the Windows cluster, added a new IP resource for the new cluster, and performed the other remaining steps to add a new AG replica to the SQL instance on this new server. When we try to move the core cluster resources to the new node to test failover, we get an error. Here's the command we've been using:
Move-ClusterGroup "Cluster Group" -Node node3
and it returns the error: The operation failed because either the specified cluster node is not the owner of the group, or the node is not a possible owner of the group...I've checked the ownership of the cluster groups and the cluster resources and it looks like they are set appropriately:
>Get-ClusterGroup | Get-ClusterOwnerNode Cluster Object Owner Nodes ---------------- --------------- Available Storage {} Cluster Group {node1,node2,node3} SQLAG {node1,node2,node3}
[code]....
We've double-checked that all IP resources are in the right subnets and that the dependencies for the Cluster Name resource and the Listener Name resource are set appropriately. I'm not sure what else to check since the PowerShell commands seem to indicate that node3 is an owner of the appropriate resources. What other things need to be checked or if the ownership being checked isn't the same as what PowerShell is checking?
1. In alwaysON fail over cluster, Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. After fail over done to 2nd secondary node what mode in production(readonly or read write).
4. How to rollback to production primary ,will change data in secondary will get updated in primary.
I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
We have 2 nodes window Server 2012 R2 and SQL Server 2012 Enterprise Version cluster setup. We can switch roles and Node to one node to another and revert back to previous node with out any issues. But we are facing when one Node is restarted. We could not restart that Node in cluster Service start in Failover cluster Manager. Error Details is displayed as below inside double code."Cluster node NODE1 could not to join the cluster because it failed to communicate over the network with any other node in the cluster. Verify the network connectivity and configuration of any network firewalls."
I checked windows firewall. windows firewall is all of in Node1, Node2, SAN and DC.I have disabled and enabled the Internal and private network of Node 1. I have validated the cluster. it is showing no error though.
Node1: Public IP: 10.10.0.11 SubNet Mask:255.255.255.0 Default Getway: 10.10.0.1 Prefered DNS: 10.10.0.10 (Ip of DNS)
[code]....
Private Network: Not configured.pinging to each other ip is successful from one node to another.
We have sql server 2005 installed locally on 2 servers and want to set up failover clustering. Do we need to uninstall what we have then install as failover cluster? Thanks.
I have a production failover cluster running SQL Server 2000 at SP3that I want to upgrade to SP4. I do not have a test failover clusterto test with so I need the install on the primary server to work thefirst time. Per the information I have I just install the patch on theprimary server and it will install both on the primary and on thesecondary.However, I remember when I did the initial install and it failed. Thefirst problem traced to the fact that the install uses temporary filesunder the profile of the installing administrator and the id had neverlogged into the second server so the install failed on creating thetemporary file. The was a second problem that related to an OS featurethat had to be off for the install to work.If anyone out there has done this upgrade and remembers encountering aproblem and its fix/workaround I would appreciate a head up warning.Thank you-- Mark D Powell --
