in my environment I am running the SQL Server agent job.i am getting below message.
create a master key in the database or open a master key in the session before performing this operation” errorÂ
USE <database>
select * from sys.database_files
and
select * from sys.master_files where database_id= <db id>
give me different size of memory optimized file in <database>
Microsoft SQL Server 2014 - 12.0.2456.0 (X64)
I have 6 tables which are very huge in row count and need to be partitioned for better manageability.
Little info: Every day, 300 Million records are inserted and 300 million records are deleted in below 7 tables. we maintain only 8 days worth of data in below tables which is the reason records which are older than 8 days are continuously deleted.
Master table which has [ID],[Timestamp]
Table Name: Sample - 2,578,106
Child tables: Foreign key [ID] is common for all the tables. There is no timestamp column in child table.
dbo.ConnectionDB - 1,147,578,048
dbo.ConnectionSS - 876,458,321
dbo.ConnectionRT - 118,133,857
dbo.ConnectionSample - 100,038,535
dbo.Command - 100,032,235
I would like to partition the above child tables based on the IDs that are inserted every 4 hours. Meaning, All IDs that are inserted in 4 hours window should be in a partition.
I have a master table with after insert trigger on it.. When record is inserted into master table, the trigger fires and is captured in the backoffice table. In case the trigger fails, my record is neither in the master table nor in the back office table..
Is there anyway to capture the record either in the master table or in a separate table.
I'm looking for a way to list the target servers associated with a master server. The reason is that we're moving to another master server, and I'd prefer not to move the targets manually.
I've got most of the T-SQL already (sp_msx_enlist, sp_add_jobserver), but I'd like a scripted solution instead of a wizard.
What is the needed permission to create credential except for sysadmin?
Already granted securityadmin but still user does not have permission to perform this action.
We have one table where we store all documents in one of the column called "Doc" with varbinary(max) data type.
We want to download those documents from sql table to windows explorer and i wrote BCP in sql 2005. And things were fine.
The format file I used there looks like this,
9.0
1
1 SQLBINARY 0 0 "" 1 Doc ""
Now we are in 2014 and when I try the same code with same format file, it hangs in the middle. So I changed the file to 12.0 instead of 9.0 but still not working.
I have built a SQL 2014 Always on Cluster. I need to create three Availability groups and listeners in the same instance. Do I need 3 separate IP address for each listener or one IP address can be shared for all 3 Listeners ?
View 3 Replies View RelatedI have made a clean install of SQL 2014 including MDS on a server with Win Server 2012 R2.
After the installation I cant create new models because on an error saying that "Must declare the scalar variable "@Version_Id". "
I can see that the tables gets created in the MDS database but the models dont show up in the web interface.
I get the same error message when I try to deploy an old model.
I want to generate dynamic temp table so, from one strored procedure am getting an some feilds as shown below
CM_id,CM_Name,[Transaction_Month],[Transaction_Year],''[Invoice raised date],''[Payment Received date],''[Payout date],''[Payroll lock date]
for i want to generate table for the above feilds with datatype
I have created a stored procedure for retrieving column name, as shown below
CM_id, CM_Name, [Transaction_Month], [Transaction_Year], [Invoice raised date],[Payment Received date],[Payout date],[Payroll lock date]
Now I am trying to create a temporary table using the above generated coluimns from Stored Procedure with datatype.
we have roughly 22 people connected to one database. But after a while, their applications begin to drag due to in and out communication with the server. When i check the active connections on the sql server, some times i see 157 active connections, please how to i set a timeout or connection interval close, so as reduce the heavy load being put on the server. Or how can i automatically close connections when they get higher than 50 connections.
This settings should be sql server 2008 related.
I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
And have chosen the destination - unstructered (flat) file. But the wizard proposes to export only one table (dbo.Acocount) and all the others from the list are not exported. How can I export ALL the data into one file.I need to do this to edit the syntax in the editor and then import this data and database structure into Postgresql
View 4 Replies View RelatedI have two databases like each other that one is the backup of another. Each DB have 2 filegroups. I want to replace one filegroup from one db to another. How do I do this? Or how do I backup and then restore?
View 3 Replies View RelatedQuery to show logins that don't have any permissions within the SQL instance? I'm tasked with doing some cleanup and have found some cases where the database was deleted or moved to another server but the logins that used it were not deleted. I'd like to identify them to research.
For instance a query to show logins that have no permissions in any of the existing databases would be handy. I'm thinking it would be complicated by the need to loop through all of the existing databases and then outer join it to the list of instance level logins. Going to try to write something like that but was hoping that a script already exists.
I have multiple SQL 2008 severs with databases. Also, 1 mirroring server in place.
Since my database count is increasing can i have only 1 mirroring server. Is there any limit of db at mirroring server. I would have approx. 150 databases.
I want to Replace The Big Log database with A new one ( A database with same structure).But current DB has many connection .
This is my plan :
1- Create a new database with same structure.
2- Rename current database to olddb with this code :
USE master
GO
EXEC sp_dboption CurDataBase, 'Single User', True
EXEC sp_renamedb 'CurDataBase', 'OldDataBase'
GO
3- Rename Newdb to current DB.
USE master
GO
EXEC sp_renamedb 'NewDataBase', 'CurDataBase'
is it true ? and Tsql code is ok ? (dont forget many of connection to curdatabase (that Is a log db) and loss some seconds data is not problems)
My database went into suspected mode. and after we had run some script, it came out from the suspected mode. but we encountered this error while opening table in database.
2009-11-02 15:46:42.90 spid51 Error: 824, Severity: 24, State: 2.
2009-11-02 15:46:42.90 spid51 SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:43686; actual 0:0). It occurred during a read of page (1:43686) in database ID 23 at offset 0x0000001554c000 in file 'H:MSSQL.SQL2008MSSQLDATAmy_db.mdf'.
Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
I have a job under the SQL Server Agent, which is configured to send an email notification on failure.
The job is scheduled to run every 30 minutes.
Is it somehow possible to configure it so that it only sends one email in case of subsequent failures instead of "spamming" my inbox every half hour?
I tried to copy db from server to server by sa user ( sql login) but this error raised and the copy failed
Executed as user: NT ServiceSQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 9:55:24 AM Progress: 2015-05-11 09:55:24.45 Source: 10_32_0_201_10_32_0_202_Transfer Objects Task Task just started the execution.: 0% complete End Progress Error: 2015-05-11 09:56:31.87 Code: 0x00000000 Source: 10_32_0_201_10_32_0_202_Transfer Objects Task
An error occurred while transferring data. See the inner exception for details. StackTrace: at Microsoft.SqlServer. Management. Smo. Transfer. TransferData()The Execution method succeeded, but the
[code]....
number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:55:24 AM Finished: 9:56:32 AM Elapsed: 67.892 seconds. The package execution failed. The step failed.
Is there a better way to deal with the virtual log files?...I see several approaches in dealing/decreasing the virtual log files for a database..want to know what's the best n safest approach, from the masters here?
View 9 Replies View RelatedI have an environment with MS-SQL Server 2014 and always-on availability group configured (on 2-nodes).
I'm writing a Powershell Script which removes the database from the availability group (on the primary server) and then SHOULD drop the database on the secondary Server.
That works most of the time, but not always...
When it fails I get the error message:
Cannot drop database "Customer_2" because it is currently in use.
When i check the secondary DB-Server (sp_who2) while the script is running, i see that there is a process for the DB "Customer_2" with Status="background", Command="DB STARTUP" and LastWaitType="REDO_THREAD_PENDING WORK".
As soon as the script fails, this process for "Customer_2" disapears.
This happens always only on the second database in the availability group.
Why is the process still there, even after I removed the database from the Availability Group on the primary node.
If I remove the database from the availability group manually, the "background" process on the secondary node for that database disappears..
[URL]
1) We are providing a e governance solution for an organization,where we are providing a centralized database,Client have provided 5 Database server for the same.how can we position the Database Server? there are 5000 Concurrent users and 25000 users,SAN Storage for approx. 60 TB,Database size of 2 TB and growth of 1 TB every year
2) How many instance can we have for above said Case?
3) How much RAM Required ?
We are in web site development company,Previously we don't have proxy configuration, after implementing Proxy , we have an issue to connect a remote database.
The error pops "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. Error 53".
I am actually very new to SQL databases, I have received an .MDF and .LDF for a database of size 50 GB...
I need to create or attach these files to a new database and extract some columns then convert them to .text or .csv...
I've got reporting services on a different box from the database and I can see all the reports, but when I try to setup a subscription, I get this weird error:
The SQL Agent service is not running. This operation requires the SQL Agent service. (rsSchedulerNotResponding)
The same error happens when I connect to the database server via management studio and try to run a job.
I can confirm that SQL Agent service is running.
While doing the restore of the database is it better to copy the backup file locally and restore or restore from the network path is good option?
What kind of the problems we may get restoring the backup from the network path?
is there a way to backup all stored procedures in a database?
View 4 Replies View Relatedhow to identify the data leakage in a database , as I heard in one of my environment?
what is the meaning for data leakage ?
We have a 2 node clustered instance(SQL 2014) with 26 databases and we would like to enable alwayson for one of the databases for reporting (only one secondary and do not need high availability setup). I'm thinking if the reporting application/queries can explicitly connect to the secondary database(Instance namedatabase name) without using a listener and setup the secondary in asynchronous commit mode. Read about the REDO thread blocking due to reporting workload. How does this affect if I implement the secondary in this way.
View 3 Replies View RelatedCopy mssqlsystemresource.mdf of a recently upgraded server and paste to an old server have same effect of upgrading via .exe installation?
My idea is to save time and administrative efforts in upgrades (Service Packs and/or Cumulative Updates) using this method.
According to BOL:
The Resource database makes upgrading to a new version of SQL Server an easier and faster procedure. In earlier versions of SQL Server, upgrading required dropping and creating system objects. Because the Resource database file contains all system objects, an upgrade is now accomplished simply by copying the single Resource database file to the local server.
I have SQL 2014. When I try to restore a user database using SSMS GUI, the Restore Database Pop up box never pops up. This happens for any database on this server at any time. Sometimes I get the pop up, some times I dont get.
So I tried to click on Databases on Top and Restore Database, and then select the db that I need to restore from Drop down, then it shows "creating restore plan selecting backups" but it takes forever.
We have full backup and trn log backups every 30 mins. So is it trying to get all these backup files in the background causing this issue? If yes then how to overcome this?