I have this command :
Exec 'update .... insert ..... delete ..... insert ...'
I Execute these command in one execution.
exec ('...')
Are these commands act as a transaction? If one of them create error , another commands run or rull backed?
I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.
View 8 Replies View RelatedIs there a formula for calculating how expensive a transaction will be in terms of disk space used before its run. I dont want it accurate to the MB, but rough enough so I can determine how much additional space to assign to a transaction log or SAN volume.
Currently we're reindexing ~25billion rows, nothing too wide, say 12 columns consisting of 1 varchar(50) and the rest ints, bits and money.Roughly speaking if I reindex the clustered index on an int indetity, (with sort_in_tempdb) how would I calculate the the disk space used?
I have a database that is part of AlwaysOn that is filling up the transaction log drive even though I have a daily full backup and transaction logs set for every 2 hours. The backups are going from both the primary and secondary replica backuping up to the shared disk and I have the backup preferences set to the primary.
When I try to shrink the log I get 'The transaction log for database 'DB' is full due to 'LOG_BACKUP''. I have to manually backup the trans log and then shrink, why the maintenance plan backups aren't doing this even though they are "working".
Replication-Replication Distribution Subsystem: agent PRODDATA6 failed. Could not find stored procedure 'sp_MSdel_dboActiveTask_msrepl_ccs'.
Replication-Replication Transaction-Log Reader Subsystem: agent PRODDATA6. The process could not execute 'sp_replcmds' on 'PRODDATA6'.
Replication-Replication Distribution Subsystem: agent PRODDATA6. Could not find stored procedure 'sp_MSupd_dboActiveTask'.
Looks like these sp's got deleted?
I want to generate dynamic temp table so, from one strored procedure am getting an some feilds as shown below
CM_id,CM_Name,[Transaction_Month],[Transaction_Year],''[Invoice raised date],''[Payment Received date],''[Payout date],''[Payroll lock date]
for i want to generate table for the above feilds with datatype
Whenever I am doing reinitialization, publisher table schema is applying at subscriber level
I don't want to apply all changes ...
How can I skip the schema changes for transaction replication ...
We have multiple databases on a single instance in an OLTP environment. I have my data files on a separate SAN LUN from my transaction log files (and a few NDFs split out onto additional LUNs). I was wondering if there is a performance benefit to putting each LDF file on its own LUN? Or at least my few busiest LDFs?
We are currently on 2012, but I'm having to put together specs for a 2014 installation and need to answer this question without having an environment in which I can benchmark different setups. I just want to hear whether or not others have done this (why or why not?).
I'm working on a large scale project that is currently in production. We have a big process that recently changed to use In-Memory Tables with SQL 2014 for performance efficiency.
The Process uses:
51 In-Memory SQL Tables.
50 Stored Procedures (not native) that loads data(Insert) from about 150 regular Tables and IM tables.
300 Validations (short stored procedure not native) Selecting from those 50 In-Memory Tables (And insert to In-Memory table that save the validation errors if exists on In-Memory table).
At the end of this process we clean the table from the data that relavnt to etch prosses(DELETE FROM WHERE)
B.T.W
No UPDATE STAT on In-Memory are used-when we test the prosses it slow as down and cause some locks.
We are calling this process from ADO.Net, loads stored procedure first and then validations, each SP use different SQL Connection. In normal use, everything works fine and takes about 1.5 second.
Under stress test (6 Clients X 100 Tasks) for 30 minutes. After several minutes we are starting to get this SQL Exception (1 SQL Exception for every 20 tasks):
41301. A previous transaction that the current transaction took a dependency on has aborted, and the current transaction can no longer commit.
Transactions in Memory-Optimized Tables
The Exception is not clear. We are not using BEGIN TRANSACTION in the process. The SQL Exception occurs in different stored procedures each time.
Running Frequently Transaction logbackup during Integrinty check DB /optimization job will cause any issue /impact as duration will extend ...
View 2 Replies View RelatedI've recently started working with a public sector organisation who have 4 clustered sql instances that has 80% of it's db mirrored.
Looking at the transaction log - it seems that a transaction log backup is a good idea as the log is 4x larger than the data file.But I'm not allowed access to the physical server to check onto which drive I can create the trn. No RDP, no vmware - let's be honest I'm not even allowed to launch cmd line Also the Server Manager informs me "We will need to carefully look at database backups if you guys want to start doing these backups on box, as that will break our off box backup routine (it will screw the transaction chain)."
I don't understand how backing up the transaction log could break the "transaction chain"?
When viewing an estimated query plan for a stored procedure with multiple query statements, two things stand out to me and I wanted to get confirmation if I'm correct.
1. Under <ParameterList><ColumnReference... does the xml attribute "ParameterCompiledValue" represent the value used when the query plan was generated?
<ParameterList>
<ColumnReference Column="@Measure" ParameterCompiledValue="'all'" />
</ParameterList>
</QueryPlan>
</StmtSimple>
2. Does each query statement that makes up the execution plan for the stored procedure have it's own execution plan? And meaning the stored procedure is made up of multiple query plans that could have been generated at a different time to another part of that stored procedure?
Query to get CU# of sql server Instance ?
View 3 Replies View RelatedI can easily query multiple servers using the multi-server query function in Central Management Server and write some of the results to logging tables. I would like to be able to do this via a scheduled job. So far I am finding that even setting up Master/Target Servers this may not work and the only workaround is either using SSIS, SQLCMD (by basically hard coding the servername) and possibly Powershell.
tell me if they have been successful just using standard jobs and querying against multiple servers?
If I can't save the results to a 'central' database/table (I can do this when in SSMS), but can still query against multiple servers I was thinking I could write the results to a CSV file that a SSIS job picks up.
I have attempted using SSIS to iterate through servers and have been plagued with intermittent connection issues when using a For...Loop container.
Is there any single TSQL query which provides below info.When did my AlwaysOn Availability group failed over and from which node it failed to which new node(i.e. replica)?
View 3 Replies View RelatedI want print state of running query to output, because my query need long time to run. But print statement dos not work correctly!!
Note: I cannot use "go" in my query!
/* My Query */
print 'Fetch Data From Table1 is Running...'
insert into @T1
select x,y,z
from Table1
print 'Fetch Data From Table1 Done.'
[Code] .....
This store procedure will get some executable queries from the select statement, the cursor will fetch each rows to execute the query and insert the queries into table_3 to mark as 'E'. Until 17:00, this store procedure will stop execute the queries and just get the queries from select statement insert into table_3 to mark as 'C'.
I don't know why the outputs in table_3 are quiet different than I think. This store procedure comes out with two exactly same queries and one marked as C and another marked as E.
CREATE PROCEDURE procedure1
AS
DECLARE cursor_1 CURSOR FOR
SELECT
'This is a executable query'
FROM table_1
DECLARE @table_2
DECLARE @stoptime DATETIME = NULL;
[Code] ....
I would like to find Query to retrieve User DataBase Startup Time from SQL server that we see in the Sql Server Log.
I was able to find the Server Startup Time but not the individual Databases .
How to convert float to timestamp in single select query
E.g., i have float as 1.251152515236 ,
I want to convert this to datetime and from datetime to timestamp... i.e. 26:11:00
I just ran into an issue with cascading locks due to a SPID on one of my production servers. When researching the lock, I noticed that there was no sql text. SP_Who 2, nor the following query captured anything,
SELECT sqltext.TEXT
, sqlplan.query_plan
, req.session_id
, req.status
, req.command
[Code] ....
I spoke to the user causing the lock and he ran into a visual basic error when this occurred and didn't close out that window. So my guess is that it's due to an uncommitted transaction. However, shouldn't I still see something if that was the case?
I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
I have created a stored procedure with dynamic query and using sp_executesql . stored procedure is work fine.
Now i want to call stored procedure in select statement because stored procedure return a single value.
I search on google and i find openrowset but this generate a meta data error
So how i can resolve it ???
Dear all:
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
Many thanks,
Tomorrow
I inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
I want to use BCP to load data from a text file.
By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.
bcp aborts if ANY of the rows contains a FK violation. No data get loaded.
So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.
I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?
If I install an instance with Windows Only authentication, and then change it to Mixed Mode, if I enable the sa login, the password has already been set. What is the default? If it's generated, how secure is it? Is the password generated? What algorithm is used for that?
View 9 Replies View RelatedMy sql databases in SQL Server 2014 has the status "suspend" as I saw in SQL Management Studio. I can't restore to serviceable condition sql databases through standard procedures. I need to restore .mdf file.
View 9 Replies View RelatedI am using a monitoring system where I can monitor a numeric SQL result assuming the result is one field and one row.I would like to do this to say monitor the free available space or percentage on say the Master database. DBCC SQLPERF gives me a few columns and results for all databases on the server.
View 2 Replies View RelatedIn our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?
View 1 Replies View RelatedIs there a way to schedule a sql job to run at different intervals
For eg:
The job should run at
7:00 Am
8:00 AM
and then at 10:00 Am
We installed the Sql 2014 in Test server.
We observed frequently
"Process 0:0:0 (0x1e10) Worker 0x00000006B6D341A0 appears to be non-yielding on Scheduler 13. Thread creation time: 12906028806348. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 13%. System Idle 84%. Interval: 70189 ms."
Is it better to run the profiler or performan counter?
What are the filters we have to select in the profiler to monitor the Sql server
I have a SQL server box running 2014 reporting services. I have another server running IIS v8.
I would like to be able to connect to the IIS site and be given the SSRS report browser.
So externally if I browse to [URL], I am presented with the report server interface, the same as if I browse to http://xxx.xxx.xxx.xxx/reports internally.
What are my options?
What is the best approach for a read only copy of a database that is ~ 1TB. The primary database is fed nightly with an ETL process. We are currently trying to duplicate the ETL to read only server but that process is not going well. So we are looking at other options to let SQL make the copy.
The primary database is on a Win12R2 with SQL 12 or 14, a 2 node A/P failover cluster.
The read only copy will be on a Win12R2 with SQL 12 or 14. It is not a requirement to fail over to the read only copy if the primary should go down.
What would best the approach to accomplish the end result?