I got query from sysproccesses and the result for one spid is : SQLAgent - TSQL JobStep (Job 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61 : Step 1
Which job has this code : 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61
I'm getting a replication error that an object (Table) was not found. Any script that can capture this information?
View 3 Replies View Relatedhow to identify the data leakage in a database , as I heard in one of my environment?
what is the meaning for data leakage ?
I was running an operation to shrink file/emptyfile a data file, and then remove it.
It blocked and caused a huge mess, I suspect on the removal part. But I want to confirm that the emptyfile completed (and that the engine isn't going to try to put more data in there for when I schedule the removal part again a week or more from now).
How does the engine know not to put any more data in there, and how long does that situation last?
In the Operating environment databases, may be made tables in the database on a temporary basis but they are still yet and they are not removed, how to identify tables that have been made on a temporary basis are not used (don’t have any read & write records)?
View 4 Replies View RelatedHow can I easily identify who dropped a table?
View 8 Replies View RelatedI want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
IF Object_id('GoldenSecurity') IS NOT NULL DROP TABLE dbo.GoldenSecurity;
IF Object_id('GoldenSecurityRowVersion') IS NOT NULL DROP TABLE dbo.GoldenSecurityRowVersion;
CREATE TABLE dbo.GoldenSecurity (securityID INT, CompanyId INT, Securityname VARCHAR(50), issuedate SMALLDATETIME, currencyID INT)
[Code] ......
I'm writing an application using VB 6.0 as the front-end GUI, and theMSDE version of SQL Server as the back-end (it's a program for areally small # of users --- less then 3-4).I'm trying to determine, through the Visual Basic interface, thepermissions of each user that's using the application on his/hermachine.For example, let's say I'm user "Michael" that's sitting down at mymachine using the app. I've written. The security for logging intoSQL Server will be setup using Windows Security (Trusted Connection)as opposed to Windows & SQL Server security. When Michael accesses aparticular form in the VB 6.0 GUI, I want to run some code thatautomatically checks Michael's permission levels on the underlyingtable (actually, a stored procedure supplying the data from the table)that supplies the data to the form he's looking at and then give himsome feedback on the form as to what type of permissions he has whilehe's browsing through the data shown in the form.For example, Michael opens a particular form, code in the backgroundis run to identify that this is Michael accessing the form, the codereturns a value that identifies what type of permissions he has on thedata in the form, and a text box on the form informs Michael (forexample) that he only has read-only permissions to the data he isviewing and cannot edit any of the data.As another example, user Karen sits down at her computer, logs intothe application, opens the same form that Michael just opened, thecode is run in VB to detect the level of permissions she has on thedata being displayed in the form, and the text box on the form informsher that she has editing permissions on the data in the underlyingtable.Etc...If anyone can post an example of the code they use in accomplishingthis task in an application they've written, I'd really appreciate apoint in the right direction or a real-world example that's beenimplemented by one of you. I've written several apps. thus far usingMSDE as the back-end, but the previous apps. I've written were forclients that didn't care about restricting access to theapplication... everyone could pretty much use the application as theydesired and do anything they desired to the data.The current client I'm writing the app. mentioned here for wants tohave security in place to where various users access the applicationwith various levels of permissions to do stuff (or *not* do stuff) tothe data in the application.Thanks very much in advance for any assistance / code provided!Sincerely,Brad McCollumJoin Bytes!
View 1 Replies View RelatedI have a SSAS stored procedure with a signature:
public Set DoSomthing(Set toBeProcessed, Set measuresToWorkWith)The set measurseToWorkWith is passed as {[Measures].[Measure1], [Measures].[Measure2] ...}
with the measures being real or query-scoped calculated members.
To get the value of the measure for each tuple in the set toBeProcessed, I create an Expression for each tuple (measure) in the set measuresToWorkWith then for each tuple in toBeProcessed call expression.Calculate(tuple) which returns a MDXValue.
My problem is that in order to make the code generic I need to get the real (.NET) data type of the MDXValue. The class only has explicit conversion methods ToInt16() etc which implies that the data type is known at design time.
However, if one of the measures is a query-scoped calculation then it could return a .NET double, int, bool or string.
If the measure is real then I can look up its metadata. However, it appears that if it is a formula (scoped member) then are all bets are off?
I inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
I want to use BCP to load data from a text file.
By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.
bcp aborts if ANY of the rows contains a FK violation. No data get loaded.
So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.
I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?
If I install an instance with Windows Only authentication, and then change it to Mixed Mode, if I enable the sa login, the password has already been set. What is the default? If it's generated, how secure is it? Is the password generated? What algorithm is used for that?
View 9 Replies View RelatedMy sql databases in SQL Server 2014 has the status "suspend" as I saw in SQL Management Studio. I can't restore to serviceable condition sql databases through standard procedures. I need to restore .mdf file.
View 9 Replies View RelatedI am using a monitoring system where I can monitor a numeric SQL result assuming the result is one field and one row.I would like to do this to say monitor the free available space or percentage on say the Master database. DBCC SQLPERF gives me a few columns and results for all databases on the server.
View 2 Replies View RelatedIn our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?
View 1 Replies View RelatedIs there a way to schedule a sql job to run at different intervals
For eg:
The job should run at
7:00 Am
8:00 AM
and then at 10:00 Am
We installed the Sql 2014 in Test server.
We observed frequently
"Process 0:0:0 (0x1e10) Worker 0x00000006B6D341A0 appears to be non-yielding on Scheduler 13. Thread creation time: 12906028806348. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 13%. System Idle 84%. Interval: 70189 ms."
Is it better to run the profiler or performan counter?
What are the filters we have to select in the profiler to monitor the Sql server
I have a SQL server box running 2014 reporting services. I have another server running IIS v8.
I would like to be able to connect to the IIS site and be given the SSRS report browser.
So externally if I browse to [URL], I am presented with the report server interface, the same as if I browse to http://xxx.xxx.xxx.xxx/reports internally.
What are my options?
What is the best approach for a read only copy of a database that is ~ 1TB. The primary database is fed nightly with an ETL process. We are currently trying to duplicate the ETL to read only server but that process is not going well. So we are looking at other options to let SQL make the copy.
The primary database is on a Win12R2 with SQL 12 or 14, a 2 node A/P failover cluster.
The read only copy will be on a Win12R2 with SQL 12 or 14. It is not a requirement to fail over to the read only copy if the primary should go down.
What would best the approach to accomplish the end result?
I did not worked on AVG in sql 2012, what are the possible errors and how to resolve in always on in sql 2012 .
View 1 Replies View RelatedI have 10 databases which are configured as principal in mirroring I need to failover all the databases as part of failover , instead of writing query each database as parner failover, is an script which will generate the databases as principal to failover ?
View 3 Replies View RelatedHow to check the delay in between replicas in AG?
View 3 Replies View Relatedmy 4 GB .OST file is corrupted and i am not able to access my mails and contacts.
View 2 Replies View RelatedAfter installing SSMS on some computers - the only way we can get SSMS to run correctly is to run it as the administrator. Is there a way where you don't have to do that? These end users are logging as themselves and have accounts in SQL Server all set up - but SSMS will only launch for them if we right click and select "run as administrator".After doing some digging - it seems that this is a common problem out there.
View 3 Replies View RelatedHave a SQL 2014 install and cannot for the life of me get the maintenance plan to remove old backups. I've tried everything. Rights to the folder where the backups are stored are adequate, extension set in the clean up task is as it should be, etc. Log shows the job ran successfully. Running the command manually shows successful completion, but backups are still not removed.
View 9 Replies View Relatedwhen execute the restore log command, in the messages window it shows how many seconds the restore takes, at the meantime, on the status bar, it also shows the seconds the command takes.
Two values are different and could be very different, please see below examples , restoring takes 1.8 seconds, but in total the command takes 4 seconds to complete, the other one is 8.1 seconds and 12 seconds.
What does SQL Server or Windows do after the restoring?
pic a:
pic b:
I did a xperf, I can see after the restoring is completed, sql server did garbage collect and log write, which just run very quickly, but storage is busy on reading the log file for nearly 2.2 seconds( 4-1.8), and 4 seconds ( 12-8.1) .
pic 1:
pic 2:
see pic 1 above, from 13 to 17, the restore operation is finished, but the storage jump to 100% active to do some reads, only reads no writes. zoom that period shows pic 2, it read 4096 (I don't know the unit size) for about 4 seconds, what does this do?
Data file, log file, backup file are no different drives, but all local drive, the interesting point is the read jumped after restoring, I tested it on different server, same result...
I've got an old version of SQL Server 2008 R2 Developer Edition on an old PC which is failing. I've got a new PC and have put SQL Server 2014 Developer Edition onto it. Now before the old machine completely dies, I've gotten into SSMS on the old machine and did a backup of the databases I want to save. I've moved the .BAK files to where I could get to them from SSMS on the new machine. I've gotten into SSMS and tried to do a restore the database to my new machine. However I'm getting an error that does not make any sense to me.
The database I'm I've backed up is named JobSearch. When I backed it up, that was the only database I had selected. Like I said I copied the .BAK to the new machine. Got into SSMS, told it that I wanted to restore the JobSearch database, telling it where I wanted to put it, and it then immediately fails with a:
"Restore of database 'JobSearch' failed. System.Data.SqlClient.SqlError: Logical file 'VideoLibrary_Data' is not part of the database 'JobSearch'. Use RESTORE FILEISTONLY to list the logical file names."
Well of course VideoLibrary isn't "the logical file". But neither did I select VideoLibrary (which is a database I also want to move, but I'm doing one at a time). So what in heck is going on here? Why is it complaining about a database I haven't even selected to back up? Why, when I check everything on the old machine, it's backing up JobSearch, but on the new machine it sees VideoLibrary?
I am new in SQL Server, What to check ,what action do i need to take while adding a new column to a table.
View 5 Replies View RelatedMessage: Executed as user: NT AUTHORITYSYSTEM. The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases [SQLSTATE 42000] (Error 9002). The step failed in my sql server agent job i have the above error, this type of errors i got some of multiple jobs.
View 9 Replies View RelatedA log file size of a production database has been increase from 4gb to 150 gb initial size.Now i want to find when it will grow & how much it grow & which transaction is responsible for this.
View 6 Replies View RelatedWe have applications connected to SQL using windows authentication. While having connection with Application user can also access to Database instance on the same time as well. We need to limit the access of user outside application.
View 6 Replies View RelatedAnd have chosen the destination - unstructered (flat) file. But the wizard proposes to export only one table (dbo.Acocount) and all the others from the list are not exported. How can I export ALL the data into one file.I need to do this to edit the syntax in the editor and then import this data and database structure into Postgresql
View 4 Replies View Related