I am planning to delete a login from SQL logins because he moved out from project .when i try to delete the login , it throws an error saying " The server principal owns an endpoint and cannot be dropped , error 15141 "
Same problem facing on different servers.
Note : Environment is SQL 2012,SQL 2008 including cluster servers .
I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
Have a SQL 2014 install and cannot for the life of me get the maintenance plan to remove old backups. I've tried everything. Rights to the folder where the backups are stored are adequate, extension set in the clean up task is as it should be, etc. Log shows the job ran successfully. Running the command manually shows successful completion, but backups are still not removed.
View 9 Replies View RelatedI have a requirement to delete all the orphans users for the databases. The issue I am having is with when database principal owns a schema in the DB, User cannt be dropped.
How do I transfer it to DBO in case I am looping multiple databases. This is what I got so far .
declare @is_read_only nvarchar (200)
Select @is_read_only = is_read_only from master.sys.databases where name='test' /* This should be a parameter value */
IF @IS_READ_ONLY= 0
BEGIN
Declare @SQL as varchar (200)
[Code] .....
SQL server job or SP to deny access to an AD login for certain period of time to SQL server instance...i.e. to deny access to login ADxyz from 12 PM to 10 PM and revoke access to same login at 10:01 PM...
View 3 Replies View RelatedWe have oracle linked server created on one of the sql server 2008 standard , we are fetching data from oracle and updating some records in sql server . Previously its working fine but we are suddenly facing below issue.
Below error occurred during process .
OLE DB provider "OraOLEDB.Oracle" for linked server "<linkedservername>" returned message "".
Msg 7346, Level 16, State 2, Line 1
Cannot get the data of the row from the OLE DB provider "OraOLEDB.Oracle" for linked server "<linked server name>".
We are upgrading from SQL 2008R2 to SQL2014 but we have discovered that a couple of our applications are not supported on 2014. We'd like to keep one 2008R2 server and one 2014 server until we have time to upgrade the applications and move everything to the new server. The problem is we have custom code in some of the 2014 databases that access tables in the 2008 databases.
I know we can easily do cross server joins by using a linked server, but it would be a huge undertaking to find all that code and add a linked server name in front of every table, stored procedure, etc. So my question is, is there any way to move a database to a different server and still be able to access it without having to qualify the object names with a linked server? Is there some kind of server/database synonym that can be setup that would be recognized by all databases?
In a server we had File Growth,And then We had to Add New Hard Drive And New File On It.And Now We have New server with a Huge Hard Drive.But all files remaind.Can I Reduce This files to One data file or not ?
View 3 Replies View RelatedOracle and Teradata are able to capture the windows/client login that connects to their database with a functionnal ID.I've searched around and I don't think MS SQL can do this...I administer SQL 2014 server and also SAS Enterprise guide product. I've created sql server logins for several teams so everyone shares the same sql server login which is used to bind the SAS library to my SQL server database.
However, when looking at activity monitor, I can't drill down to which user is executing a particular query. I only see the SQL login which is share amongs 200 other folks.On the other hand, when they connect from SAS to Oracle or Teradata, I can see the shared login + additionally their windows NT login used to connect to SAS which is awesome....they can't fool me by using a shared/funcionnal ID....i still see who's using that ID...
I inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
I want to use BCP to load data from a text file.
By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.
bcp aborts if ANY of the rows contains a FK violation. No data get loaded.
So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.
I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?
If I install an instance with Windows Only authentication, and then change it to Mixed Mode, if I enable the sa login, the password has already been set. What is the default? If it's generated, how secure is it? Is the password generated? What algorithm is used for that?
View 9 Replies View RelatedMy sql databases in SQL Server 2014 has the status "suspend" as I saw in SQL Management Studio. I can't restore to serviceable condition sql databases through standard procedures. I need to restore .mdf file.
View 9 Replies View RelatedI am using a monitoring system where I can monitor a numeric SQL result assuming the result is one field and one row.I would like to do this to say monitor the free available space or percentage on say the Master database. DBCC SQLPERF gives me a few columns and results for all databases on the server.
View 2 Replies View RelatedIn our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?
View 1 Replies View RelatedIs there a way to schedule a sql job to run at different intervals
For eg:
The job should run at
7:00 Am
8:00 AM
and then at 10:00 Am
We installed the Sql 2014 in Test server.
We observed frequently
"Process 0:0:0 (0x1e10) Worker 0x00000006B6D341A0 appears to be non-yielding on Scheduler 13. Thread creation time: 12906028806348. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 13%. System Idle 84%. Interval: 70189 ms."
Is it better to run the profiler or performan counter?
What are the filters we have to select in the profiler to monitor the Sql server
I have a SQL server box running 2014 reporting services. I have another server running IIS v8.
I would like to be able to connect to the IIS site and be given the SSRS report browser.
So externally if I browse to [URL], I am presented with the report server interface, the same as if I browse to http://xxx.xxx.xxx.xxx/reports internally.
What are my options?
What is the best approach for a read only copy of a database that is ~ 1TB. The primary database is fed nightly with an ETL process. We are currently trying to duplicate the ETL to read only server but that process is not going well. So we are looking at other options to let SQL make the copy.
The primary database is on a Win12R2 with SQL 12 or 14, a 2 node A/P failover cluster.
The read only copy will be on a Win12R2 with SQL 12 or 14. It is not a requirement to fail over to the read only copy if the primary should go down.
What would best the approach to accomplish the end result?
I did not worked on AVG in sql 2012, what are the possible errors and how to resolve in always on in sql 2012 .
View 1 Replies View RelatedI have 10 databases which are configured as principal in mirroring I need to failover all the databases as part of failover , instead of writing query each database as parner failover, is an script which will generate the databases as principal to failover ?
View 3 Replies View RelatedHow to check the delay in between replicas in AG?
View 3 Replies View Relatedmy 4 GB .OST file is corrupted and i am not able to access my mails and contacts.
View 2 Replies View RelatedI got query from sysproccesses and the result for one spid is : SQLAgent - TSQL JobStep (Job 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61 : Step 1
Which job has this code : 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61
After installing SSMS on some computers - the only way we can get SSMS to run correctly is to run it as the administrator. Is there a way where you don't have to do that? These end users are logging as themselves and have accounts in SQL Server all set up - but SSMS will only launch for them if we right click and select "run as administrator".After doing some digging - it seems that this is a common problem out there.
View 3 Replies View Relatedwhen execute the restore log command, in the messages window it shows how many seconds the restore takes, at the meantime, on the status bar, it also shows the seconds the command takes.
Two values are different and could be very different, please see below examples , restoring takes 1.8 seconds, but in total the command takes 4 seconds to complete, the other one is 8.1 seconds and 12 seconds.
What does SQL Server or Windows do after the restoring?
pic a:
pic b:
I did a xperf, I can see after the restoring is completed, sql server did garbage collect and log write, which just run very quickly, but storage is busy on reading the log file for nearly 2.2 seconds( 4-1.8), and 4 seconds ( 12-8.1) .
pic 1:
pic 2:
see pic 1 above, from 13 to 17, the restore operation is finished, but the storage jump to 100% active to do some reads, only reads no writes. zoom that period shows pic 2, it read 4096 (I don't know the unit size) for about 4 seconds, what does this do?
Data file, log file, backup file are no different drives, but all local drive, the interesting point is the read jumped after restoring, I tested it on different server, same result...
I've got an old version of SQL Server 2008 R2 Developer Edition on an old PC which is failing. I've got a new PC and have put SQL Server 2014 Developer Edition onto it. Now before the old machine completely dies, I've gotten into SSMS on the old machine and did a backup of the databases I want to save. I've moved the .BAK files to where I could get to them from SSMS on the new machine. I've gotten into SSMS and tried to do a restore the database to my new machine. However I'm getting an error that does not make any sense to me.
The database I'm I've backed up is named JobSearch. When I backed it up, that was the only database I had selected. Like I said I copied the .BAK to the new machine. Got into SSMS, told it that I wanted to restore the JobSearch database, telling it where I wanted to put it, and it then immediately fails with a:
"Restore of database 'JobSearch' failed. System.Data.SqlClient.SqlError: Logical file 'VideoLibrary_Data' is not part of the database 'JobSearch'. Use RESTORE FILEISTONLY to list the logical file names."
Well of course VideoLibrary isn't "the logical file". But neither did I select VideoLibrary (which is a database I also want to move, but I'm doing one at a time). So what in heck is going on here? Why is it complaining about a database I haven't even selected to back up? Why, when I check everything on the old machine, it's backing up JobSearch, but on the new machine it sees VideoLibrary?
I am new in SQL Server, What to check ,what action do i need to take while adding a new column to a table.
View 5 Replies View RelatedMessage: Executed as user: NT AUTHORITYSYSTEM. The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases [SQLSTATE 42000] (Error 9002). The step failed in my sql server agent job i have the above error, this type of errors i got some of multiple jobs.
View 9 Replies View RelatedA log file size of a production database has been increase from 4gb to 150 gb initial size.Now i want to find when it will grow & how much it grow & which transaction is responsible for this.
View 6 Replies View RelatedWe have applications connected to SQL using windows authentication. While having connection with Application user can also access to Database instance on the same time as well. We need to limit the access of user outside application.
View 6 Replies View RelatedAnd have chosen the destination - unstructered (flat) file. But the wizard proposes to export only one table (dbo.Acocount) and all the others from the list are not exported. How can I export ALL the data into one file.I need to do this to edit the syntax in the editor and then import this data and database structure into Postgresql
View 4 Replies View RelatedQuery to get CU# of sql server Instance ?
View 3 Replies View Related