we are about to start a logshipping with the secondary server in read only mode.
I just wanted to know the disadvantages of using a read only on the secondary server.
I mean whether the transactional logs will be restored periodically or it won't be restored till users are connected on the secondary server.
We have a reporting database which is refreshed daily from prod backup and later creating new tables/views/indexes as part of the refresh job. Is there a better approach we can implement in sql 2012/2014 for this scenario since we are planning to migrate to sql2014.
View 5 Replies View RelatedWe have reports in SharePoint integrated mode which are really slow when compared to native mode. I have been asked to research and give info on what exactly causes the delays.
Any articles which give me information as to what happens when a report is run from SharePoint server and where does it log.
My database went into suspected mode. and after we had run some script, it came out from the suspected mode. but we encountered this error while opening table in database.
2009-11-02 15:46:42.90 spid51 Error: 824, Severity: 24, State: 2.
2009-11-02 15:46:42.90 spid51 SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:43686; actual 0:0). It occurred during a read of page (1:43686) in database ID 23 at offset 0x0000001554c000 in file 'H:MSSQL.SQL2008MSSQLDATAmy_db.mdf'.
Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
What is the best approach for a read only copy of a database that is ~ 1TB. The primary database is fed nightly with an ETL process. We are currently trying to duplicate the ETL to read only server but that process is not going well. So we are looking at other options to let SQL make the copy.
The primary database is on a Win12R2 with SQL 12 or 14, a 2 node A/P failover cluster.
The read only copy will be on a Win12R2 with SQL 12 or 14. It is not a requirement to fail over to the read only copy if the primary should go down.
What would best the approach to accomplish the end result?
I Want to test for Automatic switch between primary and secondary.
How do i do it ?
or
I need this for some purpose : How to set suspect mode for a database ?
Assume if i have a connection(Application intent readonly) starts with reading, writing and again reading data for a report. how it will works in SQL 2014 Always availability on?
View 3 Replies View RelatedI have a database that I am trying to recover space from, it consists mostly of unallocated space, but I can’t seem to get that unused space released.
Database size: 40,245.13 MB
DatafileMB: 38,063.63, DataAvailableMB: 37,085.15
LogfileMB: 2181.51
Sysfiles shows:
fileidgroupidsizemaxsizegrowthstatusperfname
114872144-112820SomeDB
202792332684354561010486420SomeDB_log
The DB is in simple recovery mode. There are no open transactions (used dbcc opentran).
The server is running SQL Server 2014 and the DB is in compatibility mode SQL Server 2008 (100). It was upgraded to 2014 a month or two ago.
I have tried to re-size the log to 100mb, but any way I have tried (none gave errors), the log file remains the same size. I have tied to shrink the log file (through the UI and via DBCC commands) without success; no errors, but also no change in file size.
I have checked Log Reuse Waits, just in case, and as expected it showed “NOTHING” (select log_reuse_wait_desc, name from sys.databases)
I tried running a checkpoint, but that did not allow any resize or shrink to work.
I have tied creating large transactions to move the used point in the log file, in case this was the issue. I did this by creating tables that I drop after large inserts. While it shows me that the log space % used increased, the log file still does not allow the space to be reduced.
The following is what I was using for the transactions to get the log used.
BEGIN TRAN
select a.* into testtable from sysobjects a, sysobjects b, sysobjects c
ROLLBACK TRAN
Each insert creates 93,576,664 rows.
Running dbcc SQLPerf(logspace) :
DBLogSize(MB)LogSpaceUsed(%)Status
SomeDB2181.534.204890
Running dbcc loginfo:
RecoveryUnitIdFileIdFileSizeStartOffsetFSeqNoStatusParityCreateLSN
0211437342728192602640
02114373427211437424645701280
Do I just need to continue running large transactions until the log space used gets high enough to get the “end point” in the log to really move? Is there an easier way to accomplish this (I have several DBs that have the almost identical problem), what I am using moves the Log Space Percent Used about a percent on each execution.
I am curious what other people have done to implement read-only routing for a large number of procedures.
Basically figuring out when to call procedures that are read-only with read-only intent.
We have a user application that passes an encrypted string to a web service that directs it to our SQL Servers.
I've been tasked with finding a way to make this happen without changing the application.
The only thing I have been able to come up with is writing something (which I did) that will identify whether something is read-only or not and storing a big list.
Then having the web service look up the given procedure and adding the intent where needed.
Having an annoying AG/AO problem with the read only routing side of it.
Let me give some specifics first:
2 SQL Server Instances, Not Clustered.
Availability Group is named 'Ireland'
There is a primary Replica and a Secondary Replica, named:
'IrelandPrimary' and 'IrelandSecondary'
There is a listener configured with the name 'ListenIreland' on Port 14330 (the two 3's are correct)
Read Only Routing URLS are configured as follows:
IrelandPrimary tcp://Ireland.dom.local:49891ALL
IrelandSecondary tcp://Ireland.dom.local:49841ALL
So now my problem:
When I try to connect using the ApplicationIntent=Readonly; or even using -K ReadONLY in sqlcmd I get the error telling me that my connection was actively refused.
This is connecting to the Listener, not the instance itself - that works fine. I'm at a bit of a loss now.
To explain what I am trying to achieve is a for a connection to be redirected to the secondary replica when its set for read-intent.
I've just noticed that it only fails when I specify ApplicationIntent=ReadOnly; If I omit the Intent It connects to the read-write database instead.
We installed SP1 for SQL Server 2014 this past weekend and got this error message in the logs. I found that if you set the db to read-write, it updates the system objects, even after SP1 has completed. Then you can set it back to read-only. I'm just posting this so other people can find it on the internet, as I wasn't able to find it specifically.
Error Log Entry:System objects could not be updated in database 'x' because it is read-only.
Problem: After installing SP1 for SQL Server 2014 you will find this message in the error logs saying read-only databases could not be updated.
Solution: Simply set the db to read-write and the system objects will get updated, long after SP1 was installed.
ALTER DATABASE [x] SET READ_WRITE WITH NO_WAIT
Then set it back to read-only:
ALTER DATABASE [x] SET READ_ONLY WITH NO_WAIT
You should then see these log entries:
System objects could not be updated in database 'x' because it is read-only.
Setting database option READ_WRITE to ON for database 'x'.
Starting up database 'x'.
CHECKDB for database 'x' finished without errors on 2015-07-25 01:02:28.143 (local time). This is an informational message only; no user action is required.
Synchronize Database 'x' (129) with Resource Database.
Setting database option READ_ONLY to ON for database 'x'.
Starting up database 'x'.
CHECKDB for database 'x' finished without errors on 2015-07-25 01:02:29.888 (local time). This is an informational message only; no user action is required.
We have always on setup in our environment with read only replica. The primary database has 2 schema one is a dbo and other xyz. We have some store procs created in dbo schema and xyz schema. These store procs are being used by SSRS reports to retrieve the data (select only) no data changes will be made.
when we run the store proc from the read only server the storeprocs in the dbo schema run fine but xyz schema are failing with the message saying failed to update the database as this is a read only...
I have a 2 node cluster with 2 standalone 2k14 instances having alwayson setup. As per client requirement we have created a client access point with a cname alias in dns to connect to secondary replica. Now, everytime whenerver the roles switch over one has to manually move this resource from the previous secondary node to the new secondary node. This is tedious, and should not be done manually either, so I am looking for a way to automate it so that as soon as the role switches over, the resource group after some time should also switch over to the current secondary.
Env details
xa (current primary)
y2a (secondary)
client access point (resource group): aglreadtest
I am setting up extended events more or less just fine, however I am a bit confused as to how to read and load them into a table for querying. In particular the offset part - is there a way to load just a given dates worth in?
I've got the files configured to be 20MB before rolling over, the XE is running all the time.
So if i load in the full file now, say that covers 2.5 days worth, when I load it again tomorrow to get the updated data I'm also reloading today, which is a waste?
I presume I am going about this wrong, but lack an example that really goes into detail of practicalities of loading this data.
I have 3 servers taking part in an AlwaysOn AG.
I want to grant a user READ access to only one replica, and certainly not to the principle.
How do I go about doing this?
How you would calculate the average read/write latency experienced by a SQL Server instance during a specific time window in order to monitor this for multiple instances. From this MSDN blog, I know that you have to take multiple samples and do some calculations to get the correct latency.
[URL] ...
However, the SQLServer:Resource Pool Stats object tracks these numbers per resource pool and we want to get one number for the whole server. Since there can be a different base value for each resource pool, you can't simply sum the numerator values together. Here's some sample data from a server that illustrates the problem.
object_name counter_name instance_name cntr_value cntr_type
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) default 307318919 1073874176
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) Base default 25546724 1073939712
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) internal 2045730 1073874176
SQLServer:Resource Pool Stats Avg Disk Read IO (ms) Base internal 208270 1073939712
I'm thinking I would need to do some sort of weighted average, but I'm not sure if that will result in the correct value. Here's the formula I am thinking about using currently before doing the calculation over time
((default * default[base]) + (internal * internal[base]))/(default[base] + internal[base])
Then to do the calculation over time, I'd use the changes in the calculated numerator and denominator to get the average.
Does this sound like to correct way to get this value? Is there a good way to verify?
I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
We are using MSSQL 2005 and Log Shipping.
After making our secondary SQL server primary, how can we put the secondary SQL server back into standby mode?
I inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
I want to use BCP to load data from a text file.
By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.
bcp aborts if ANY of the rows contains a FK violation. No data get loaded.
So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.
I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?
If I install an instance with Windows Only authentication, and then change it to Mixed Mode, if I enable the sa login, the password has already been set. What is the default? If it's generated, how secure is it? Is the password generated? What algorithm is used for that?
View 9 Replies View RelatedMy sql databases in SQL Server 2014 has the status "suspend" as I saw in SQL Management Studio. I can't restore to serviceable condition sql databases through standard procedures. I need to restore .mdf file.
View 9 Replies View RelatedI am using a monitoring system where I can monitor a numeric SQL result assuming the result is one field and one row.I would like to do this to say monitor the free available space or percentage on say the Master database. DBCC SQLPERF gives me a few columns and results for all databases on the server.
View 2 Replies View RelatedIn our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?
View 1 Replies View RelatedIs there a way to schedule a sql job to run at different intervals
For eg:
The job should run at
7:00 Am
8:00 AM
and then at 10:00 Am
We installed the Sql 2014 in Test server.
We observed frequently
"Process 0:0:0 (0x1e10) Worker 0x00000006B6D341A0 appears to be non-yielding on Scheduler 13. Thread creation time: 12906028806348. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 13%. System Idle 84%. Interval: 70189 ms."
Is it better to run the profiler or performan counter?
What are the filters we have to select in the profiler to monitor the Sql server
I have a SQL server box running 2014 reporting services. I have another server running IIS v8.
I would like to be able to connect to the IIS site and be given the SSRS report browser.
So externally if I browse to [URL], I am presented with the report server interface, the same as if I browse to http://xxx.xxx.xxx.xxx/reports internally.
What are my options?
I did not worked on AVG in sql 2012, what are the possible errors and how to resolve in always on in sql 2012 .
View 1 Replies View RelatedI have 10 databases which are configured as principal in mirroring I need to failover all the databases as part of failover , instead of writing query each database as parner failover, is an script which will generate the databases as principal to failover ?
View 3 Replies View RelatedHow to check the delay in between replicas in AG?
View 3 Replies View Relatedmy 4 GB .OST file is corrupted and i am not able to access my mails and contacts.
View 2 Replies View RelatedI got query from sysproccesses and the result for one spid is : SQLAgent - TSQL JobStep (Job 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61 : Step 1
Which job has this code : 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61
After installing SSMS on some computers - the only way we can get SSMS to run correctly is to run it as the administrator. Is there a way where you don't have to do that? These end users are logging as themselves and have accounts in SQL Server all set up - but SSMS will only launch for them if we right click and select "run as administrator".After doing some digging - it seems that this is a common problem out there.
View 3 Replies View Related