SQL Server Admin 2014 :: Put A Clustered Index On A Date Column
May 18, 2015
I would like to put a Clustered Index on a date column in a current heap, but one question/concern.This heap every month has thousands of rows deleted and even more added later. How much of an issue will this cause the Clustered Index as far as page splits? I was thinking Fill Factor of 70%.I would normally just test and still will on Dev box, but my Dev box is much smaller than production as far as power.
View 6 Replies
ADVERTISEMENT
Oct 9, 2015
I am trying to use an indexed view to allow for aggregations to be generated more quickly in my test data warehouse. The Fact Table I am creating the indexed view on is a partitioned clustered columnstore index.
I have created a view with the following code:
ALTER view dbo.FactView
with schemabinding
as
select local_date_key, meter_key, unit_key, read_type_key, sum(isnull(read_value,0)) as [s_read_value], sum(isnull(cost,0)) as [s_cost]
, sum(isnull(easy_target_value,0)) as [s_easy_target_value], sum(isnull(hard_target_value,0)) as [s_hard_target_value]
, sum(isnull(read_value,0)) as [a_read_value], sum(isnull(temperature,0)) as [a_temp], sum(isnull(co2,0)) as [s_co2]
, sum(isnull(easy_target_co2,0)) as [s_easy_target_co2]
, sum(isnull(hard_target_co2,0)) as [s_hard_target_co2], sum(isnull(temp1,0)) as [a_temp1], sum(isnull(temp2,0)) as [a_temp2]
, sum(isnull(volume,0)) as [s_volume], count_big(*) as [freq]
from dbo.FactConsumptionPart
group by local_date_key, read_type_key, meter_key, unit_key
I then created an index on the view as follows:
create unique clustered index IDX_FV on factview (local_date_key, read_type_key, meter_key, unit_key)
I then followed this up by running some large calculations that required use of the aggregation functionality on the main fact table, grouping by the clustered index columns and only returning averages and sums that are available in the view, but it still uses the underlying table to perform the aggregations, rather than the view I have created. Running an equivalent query on the view, then it takes 75% less time to query the indexed view directly, to using the fact table. I think the expected behaviour was that in SQL Server Enterprise or Developer edition (I am using developer edition), then the fact table should have used the indexed view. what I might be missing, for the query not to be using the indexed view?
View 1 Replies
View Related
Sep 17, 2015
How can we get the list of clustered columnstore index in a database in sql server 2014
View 3 Replies
View Related
Aug 6, 2015
Would it be possible to disjoin the SQL Server Clustered environment to a new domain without having to reinstall the cluster?
disjoin
e.g 2 node activeactive cluster with 4 named instances. SQLserver1.dn.za; SQLserver2.dn.za; SQLserver3.dn.za;SQLserver4.dn.za
servernode1.dn.za; servernode2
re-join them as SQLserver1.dn.ra; SQLserver2.dn.ra; SQLserver3.dn.ra;SQLserver4.dn.ra
servernode1.dn.ra; servernode2.dn.ra
What would be the impact on the servers, will they be able to resolve the new dns.?
View 1 Replies
View Related
Aug 18, 2015
i have created a fact table which has unique cluster index as below,
CREATE UNIQUE CLUSTERED INDEX [FactSales_SalesID] ON [dbo].[FactSales] (salesid ASC)
WITH (DATA_COMPRESSION = PAGE)
GO
however later when i add CLUSTERED COLUMNSTORE INDEXES :
CREATE CLUSTERED COLUMNSTORE INDEX CSI_FactSales
ON dbo.FactSales WITH (DATA_COMPRESSION = COLUMNSTORE)
GO
it prompts error.
Msg 35372, Level 16, State 3, Line 167 You cannot create more than one clustered index on table 'dbo.FactSales'. Consider creating a new clustered index using 'with (drop_existing = on)' option.
View 4 Replies
View Related
Jun 11, 2015
Dead lock is coming in select query in application because of index. It is identified after enabling trace in database and identified by reading deadlock xml file. After index removal, deadlock is not coming in same query. But it is affecting query's performance slightly. Is it correct way to remove index if dead lock is coming because of index?
View 3 Replies
View Related
Apr 26, 2015
We have a database with a table that contains around 180m records. Each day a further 70k are inserted. No records are ever deleted as this table is used for archiving only.Users are required to perform SELECTs on this table constantly but due to the high number of INSERTs the indexes become very fragmented very quickly. My aim is to avoid daily rebuilds of the indexes which is what our software house is telling us we have to do.
This is the DDL for the table:
CREATE TABLE [dbo].[Inventory](
[EAN] [bigint] NOT NULL,
[Day] [smalldatetime] NOT NULL,
[State] [int] NOT NULL,
[Quantity] [int] NULL,
[StockValue] [float] NULL,
CONSTRAINT [PK_Inventory] PRIMARY KEY CLUSTERED
[code]...
There are also three clustered Indexes on this table each referencing a single column. The problem from my side is that I cannot understand why the three columns in a primary key would also be configured as non-clustered indexes.My solution would be one of the following:
1. Accept the tables are going to be fragmented and require a daily rebuild (don't like this one!)
2. Partition the table
3. Remove the non-clustered Indexes and let the clustered index for the primary key do the work.
View 9 Replies
View Related
Jul 1, 2015
I created columnstore index on the table with 20 columns and about 1000 000 000 rows
every day added about 5M rows
"select" queries became faster because of batch mode and table demand less disk space then before
I have also 6 similar tables with 5 000 000 000 rows and plan to move them on columnstore index
server has 128 G RAM
What pitfalls I could face if I will have so many columnstore indexes on one server?
How a could see problems in DMV?
View 3 Replies
View Related
Jul 9, 2015
I have a situation where I need to rebuild indexes on a large DB (500G).
When I do a test run of the rebuilds in my test environment it uses 100G of space - which is fine with me.
When I do a rebuild in my High Availability environment - same DB, same script - it eats up over 600G of space and fills the volume.
What can I do without removing my DB from H/A to rebuild the indexes?
View 8 Replies
View Related
Oct 4, 2015
I want to create a lot of index for my database for performance.
But I need find memory usage by indexes.
How to find memory usage by index in sql server?
View 1 Replies
View Related
Oct 31, 2015
We use SQL server always on feather on my database and we distribute statement on main database server and mirror database server for raise performance.
My police for split statement is DML (insert, update and delete) statement go to main DB and Read Data (select) statement go to mirror DB.
I want know can I use different index on main DB and mirror Database?
Because some index are used in mirror DB not used in main database.
View 3 Replies
View Related
Jun 26, 2015
We face slow performance issue for like taking long time for same query execution after We apply index rebuild and reorganize index. But, after execution of query or procedure for 2 -3 times, performance will be faster. I have following questions
1 do we need to update stats after we rebuild an reorganize index.
2. is it will be slow for 1-2 times for every query and stored procedure execution after we rebuild and reorganize index?
View 2 Replies
View Related
Aug 6, 2015
I need to restore a SQL 2008 db on SQL 2014 instance with out upgrading the database(changing compatibility level).
This database has full text enabled. I see one full text catalog an 2 full text indexes.
Do I need to worry about anything or can I perform a clean restore from the backup with full text import?
Do I need to rebuild the catalog in this case?
View 1 Replies
View Related
Sep 15, 2015
I'm trying to determine how much space I would need for my data drive and log file drive to do index rebuild. I have a database which is 100gb, it is in simple recovery mode. let me know what to have a look at to determine how much space.
View 7 Replies
View Related
Sep 13, 2014
I've been fixing some issues lately where weekly maintenance has been causing logs to grow and filling disks.
Is there any rule of thumb for allocating log space for doing reorgs and rebuilds in a worst case scenario? I'm thinking 3x the largest database size?
I've been watching them run on databases in the range of 50GB where the logs are growing well over that for rebuilds or even reorgs. Once you have a few databases like this on a server, you can suddenly eat through a lot of disk space just for holding logs during maintenance.
View 3 Replies
View Related
Mar 2, 2015
I have 10 Gb index and disk space only left 5gb .
How can i rebuild index ?
View 4 Replies
View Related
Aug 26, 2014
Im trying to change the date format to DD-MM-YYYY serverwide.
i have changed to british english in the server settings, and my user also has british english set but the date is still YYYY-MM-DD.
how i can change this?
View 9 Replies
View Related
Mar 31, 2015
I have this script that I'm trying to filter the results of the Job History to the day prior at 1800 hours.
It return dates prior to what I have in the WHERE clause.
What should the WHERE Clause look like?
USE msdb
Go
SELECT j.name JobName,h.step_name StepName,
CONVERT(CHAR(10), CAST(STR(h.run_date,8, 0) AS dateTIME), 111) RunDate,
STUFF(STUFF(RIGHT('000000' + CAST ( h.run_time AS VARCHAR(6 ) ) ,6),5,0,':'),3,0,':') RunTime,
h.run_duration StepDuration,
case h.run_status when 0 then 'failed'
[code]....
View 1 Replies
View Related
Jun 18, 2015
I have created NONCLUSTERED index on table but my report is taking more time that's why i created columnstore NONCLUSTERED index on the same table but i have one query, if any table have row and column level index(same columns in index) . Which index query will consider.
View 1 Replies
View Related
Aug 2, 2015
I am extremely new to database design, and I ran into a problem that I know comes up often, however has many opinions...
Basically I have a table that is going to have 50+ columns. The natural key on this table is actually 8 columns wide, 4 of them being Varchar columns by default. (varchar(50)'s).
I have added an identity column, (1,1) to the table, however I put the clustered index on the 8 natural keys... My plan is to rebuild the clustered index once nightly when the system isn't in use (after 7 pm).
I know others would say it would be better to have the clustered key on the 1,1 column and then add indexes on the other 8 fields... However I don't quite understand why honestly...
Every single query against this table will use the 8 columns, and will NOT use the Identity column (1,1) because they are calls from other systems that do not know the Identity column....
Therefore if your database is set up for query speed, and every single query has to have a value for 8 columns to get a valid result, does it make sense to put a clustered index over the 8 columns?
If not why? Why is putting a clustered index on an identity column (that will literally never be used in a query) a better solution?
View 9 Replies
View Related
Aug 24, 2015
I am new in SQL Server, What to check ,what action do i need to take while adding a new column to a table.
View 5 Replies
View Related
Oct 20, 2015
I've used some info on here to generate random dates within a given range and also random times - independently they work fine, but I can't seem to join them into a single field of datetime. I'm not sure why. The following snippet works fine as two independent fields:
select CAST(CAST(ABS(CHECKSUM(NEWID()))%(780)+(33968) AS DATETIME) as DATE) as theDate,
CAST(CAST(DATEADD(milliSECOND,ABS(CHECKSUM(NEWID()))%86400000 ,'00:00') AS TIME) as varchar(50)) as theTimeBut when I try to make it a single datetime field:
select CAST(cast(cast(CAST(ABS(CHECKSUM(NEWID()))%(780)+(33968) AS DATETIME) as date) as varchar(50)) + ' ' + cast(CAST(CAST(DATEADD(milliSECOND,ABS(CHECKSUM(NEWID()))%86400000 ,'00:00') AS TIME) as varchar(50)) as varchar(50)) as datetime)
Which returns with: Conversion failed when converting date and/or time from character string.
So what I am really looking for is a way to join those two values into a single datetime field... Or failing that that how to generate random dates within a range including random times...
View 9 Replies
View Related
Dec 5, 2007
Dear All.
We had Teradata 4700 SMP. We have moved data from TD to MS_SQL SERVER 2003. records are 19.65 Millions.
table is >> Order_Dtl
Columns are:-
Client_ID varchar 10
Order_ID varchar 50
Order_Sub_ID decimal
.....
...
..
.
Pk is (ClientID+OrderId+OrderSubID)
Web Base application or PDA devices use to initiate the order from all over the country. The issue is this table is not Partioned but good HP with 30 GB RAM is installed. this is main table that receive 18,0000 hits or more. All brokers and users are using this table to see the status of their order.
The always search by OrderID, or ClientID or order_SubNo, or enter any two like (Client_ID+Order_Sub_ID) or any combination.
Query takes to much time when ever server receive more querys. some orther indexes are also created on the same table like (OrderDate, OrdCreate Date and Status)
My Question are:-
Q1. IF Person "A" query to DB on Client_ID, then what Index will use ? (If any one do Query on any two combination like Client_ID+Order_ID, So what index will be uesd.? How does MS-SQL SERVER deal with these kind of issues.?
Q2. If i create 3 more indexes on ClientID, ORderID and OrdersubID. will this improve the performance of query.if person "A" search record on orderNo so what index will be used. (Mind it their would be 3 seprate indexes for Each PK columns) and composite-Clustered index is also available.?
Q3. I want to check what indexes has been used? on what search?
Q4. How can i check what table was populated when, or last date of update (DML)?
My Limitation is i Dont Create a Partioned table. I dont have permission to do it.
In Teradata we had more than 4 tb record of CRM data with no issue. i am not new baby in db line but not expert in sql server 2003.
I am thank u to all who read or reply.
Arshad
Manager Database
Esoulconsultancy.com
(Teradata Master)
10g OCP
View 3 Replies
View Related
Jan 10, 2015
Looking for query that lists all databases, in an instance, that are not accessed before a given date (e.g., not accessed before December 31, 2014)?
View 6 Replies
View Related
Jun 25, 2014
I have a database it is 50 gb with hundreds of columns. I would like to choose a certain column and convert the data in it to .csv or excel file. How can I do that I am very new to MSSQL...
View 1 Replies
View Related
Jun 17, 2015
I need to encrypt some column level data in multiple tables in SQL server 2014. I've never tried encryption in SQL server 2014. How can I achieve it?
View 4 Replies
View Related
Jun 25, 2015
I am trying to implement the column encryption on one of the tables, have used the below link as the reference and got stuck at the last step.
[URL] ....
I have completed the following steps so far.
- CREATE MASTER KEY ENCRYPTION BY PASSWORD = ‘myStrongPassword’
- CREATE CERTIFICATE MyCertificateName
WITH SUBJECT = 'A label for this certificate'
- CREATE SYMMETRIC KEY MySymmetricKeyName WITH
IDENTITY_VALUE = 'a fairly secure name',
ALGORITHM = AES_256,
[Code] .....
Example by using the function
EXEC OpenKeys
-- Encrypting
SELECT Encrypt(myColumn) FROM myTable
-- Decrypting
SELECT Decrypt(myColumn) FROM myTable
When I ran the last command :
-- Decrypting
SELECT Decrypt(myColumn) FROM myTable
I get the following error :
Msg 257, Level 16, State 3, Line 2
Implicit conversion from data type nvarchar to varbinary is not allowed. Use the CONVERT function to run this query.
Where will I use the convert function, in decrypt function or in select statement?
View 9 Replies
View Related
Jun 10, 2014
I have created a stored procedure for retrieving column name, as shown below
CM_id, CM_Name, [Transaction_Month], [Transaction_Year], [Invoice raised date],[Payment Received date],[Payout date],[Payroll lock date]
Now I am trying to create a temporary table using the above generated coluimns from Stored Procedure with datatype.
View 3 Replies
View Related
Jun 3, 2015
SQL server, by-mistake I updated values of a column in a database hosted online, is there any way undo the transaction. I didn't created any backup of the database. I read that still it can be recovered through the .ldf (log file) but unable to access it. Is there anyway to get access of the Log file or is there any way to recover the data.
View 1 Replies
View Related
Aug 25, 2015
I had an existing table with lots of indexes.
As a test (fro speed) - I added a non clustered column-store index.
When I run test queries it always ignores my new column-store index. Why?
Should I remove the old indexes, leaving just the column store?
View 2 Replies
View Related
May 3, 2015
ID A B C AVG
------------------------
1 08 09 10 -
------------------------
2 10 25 26 -
------------------------
3 09 15 16 -
------------------------
I want to calculate the average of the larges two number from the column A,B & C for particular identity and store that average in the AVG column....
View 9 Replies
View Related
Nov 14, 2006
the query:
SELECT a.AssetGuid, a.Name, a.LocationGuid
FROM Asset a WHERE a.AssociationGuid IN (
SELECT ada.DataAssociationGuid FROM AssociationDataAssociation ada
WHERE ada.AssociationGuid = '568B40AD-5133-4237-9F3C-F8EA9D472662')
takes 30-60 seconds to run on my machine, due to a clustered index scan on our an index on asset [about half a million rows]. For this particular association less than 50 rows are returned.
expanding the inner select into a list of guids the query runs instantly:
SELECT a.AssetGuid, a.Name, a.LocationGuid
FROM Asset a WHERE a.AssociationGuid IN (
'0F9C1654-9FAC-45FC-9997-5EBDAD21A4B4',
'52C616C0-C4C5-45F4-B691-7FA83462CA34',
'C95A6669-D6D1-460A-BC2F-C0F6756A234D')
It runs instantly because of doing a clustered index seek [on the same index as the previous query] instead of a scan. The index in question IX_Asset_AssociationGuid is a nonclustered index on Asset.AssociationGuid.
The tables involved:
Asset, represents an asset. Primary key is AssetGuid, there is an index/FK on Asset.AssociationGuid. The asset table has 28 columns or so...
Association, kind of like a place, associations exist in a tree where one association can contain any number of child associations. Each association has a ParentAssociationGuid pointing to its parent. Only leaf associations contain assets.
AssociationDataAssociation, a table consisting of two columns, AssociationGuid, DataAssociationGuid. This is a table used to quickly find leaf associations [DataAssociationGuid] beneath a particular association [AssociationGuid]. In the above case the inner select () returns 3 rows.
I'd include .sqlplan files or screenshots, but I don't see a way to attach them.
I understand I can specify to use the index manually [and this also runs instantly], but for such a simple query it is peculiar it is necesscary. This is the query with the index specified manually:
SELECT a.AssetGuid, a.Name, a.LocationGuid
FROM Asset a WITH (INDEX (IX_Asset_AssociationGuid)) WHERE
a.AssociationGuid IN (
SELECT ada.DataAssociationGuid FROM AssociationDataAssociation ada
WHERE ada.AssociationGuid = '568B40AD-5133-4237-9F3C-F8EA9D472662')
To repeat/clarify my question, why might this not be doing a clustered index seek with the first query?
View 15 Replies
View Related
Jan 4, 2008
I have large table with 10million records. I would like to create clustered or non-clustered index.
What is the quick way to create? I have tried once and it took more than 10 min.
please help.
View 1 Replies
View Related
