SQL Server Agent Accessing The Command Prompt
Jun 4, 2007
I need to verify a csv file exists before I call a stored procedure to complete a bulk insert. The first step in the SP will be to verify the file exists (that particular "Job" step did not fail). I have only one step in the job that I have set the type as "Operating System (CmdExec)" and the Command is "Dir C:NAFCDMDataShipmentsCooperShipments.csv". When I execute the job manually to verify the proper operation I receive the error listed below. I know the path and file name are correct as I originally typed in the UNC, when it failed I copied it from the Address bar. I attempted to move the file to the root location without success. I attempted to use another file. I have attempted to rename the file. The DBAs will not allow me to use the SP_cmdshell stored procedure (that was my first thought).
I added 'Everyone' with Full Access to the root folder and propagated these permissions to all containing folders. This again did not allow the job to run. I changed the statment to "REN C:NAFCDMShipmentsShipment.csv Shipment1.csv". I continue to get the same error. Can someone Please point me in a direction to fix this problem?
"The process could not be created for step 1 of job 0x71D51027F920A140A2913234DB7FF509
(reason: The system cannot find the file specified). The step failed.
The job failed. The Job was invoked by User sa. The last step to run was step 1 (Verify the File's Existance)."
View 3 Replies
ADVERTISEMENT
Jun 4, 2007
I need to verify a csv file exists before I call a stored procedure to complete a bulk insert. The first step in the SP will be to verify the file exists (that particular "Job" step did not fail). I have only one step in the job that I have set the type as "Operating System (CmdExec)" and the Command is "Dir C:NAFCDMDataShipmentsCooperShipments.csv". When I execute the job manually to verify the proper operation I receive the error listed below. I know the path and file name are correct as I originally typed in the UNC, when it failed I copied it from the Address bar. I attempted to move the file to the root location without success. I attempted to use another file. I have attempted to rename the file. The DBAs will not allow me to use the SP_cmdshell stored procedure (that was my first thought).
I added 'Everyone' with Full Access to the root folder and propagated these permissions to all containing folders. This again did not allow the job to run. I changed the statment to "REN C:NAFCDMShipmentsShipment.csv Shipment1.csv". I continue to get the same error. Can someone Please point me in a direction to fix this problem?
"The process could not be created for step 1 of job 0x71D51027F920A140A2913234DB7FF509
(reason: The system cannot find the file specified). The step failed.
The job failed. The Job was invoked by User sa. The last step to run was step 1 (Verify the File's Existance)."
View 1 Replies
View Related
Aug 17, 2006
I have an SSIS package that runs fine through command pormpt although when I try to run it from a SQL Servr Agent Job CmdExec step it bombs out. Please help this has me stumped...the SSIS package uses an XML connection string so certain key settings such as connection strings and email info can be changed easily. Currently this is all on the same machine. I have not moved it beyond where I am developing.
On the command line I am using the following command...
dtexec /F "S:connectionscontacts.dtsConfig" /DE "password"
Below is the output log...
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 6:59:40 PM
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.71
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.73
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.81
Source: Data Flow Task
Pre-Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.84
Source: Data Flow Task
Pre-Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Cleanup: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.95
Source: Send Mail Task
The SendMail task is initiated.: 0% complete
End Progress
Progress: 2006-08-16 18:59:42.09
Source: Send Mail Task
The SendMail task is completed.: 100% complete
End Progress
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 6:59:40 PM
Finished: 6:59:42 PM
Elapsed: 1.984 seconds
When I try to use the same command within SQL Server Agent Job using a CmdExec step I get the following error...
Description: The package is attempting to configure from the XML file "S:connectionscontacts.dtsConfig". End Info Warning: 2006-08-16 18:40:03.15 Code: 0x80012012 Source: contactsPackage Description: The configuration file name "S:connectionscontacts.dtsConfig" is not valid. Check the configuration file name. End Warning Warning: 2006-08-16 18:40:03.15 Code: 0x80012059 Source: contactsPackage Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Info: 2006-08-16 18:40:03.20 ... Process Exit Code 1. The step failed.
Thanks in advance for any help!!!
View 2 Replies
View Related
Mar 20, 2003
I am unable to execute DTS packages,ISQLs when scheduled from SQL Server Agent . It dispalys a Dr.Watson Access Voilation message on the box .The result of the job is "failed as the step did not return any result ".
1)The utilities run fine when run from clients from other computers .
2)They fail again when run thru the command prompt of the box .
3)They suceed when run via the xp_cmdshell .
Can anybody help me out ?
Thanks,
Venkat
View 7 Replies
View Related
Sep 20, 2007
A strange thing is happening to us: we create a bat file that executes an SSIS package with multiple connection managers and tasks.
When calling the bat file from command prompt €“ the package runs just fine!
When calling the same bat file from SQL Server Agent (that runs under the same NT account as SSIS, and all other SQL services, and belongs to local Adminstrators), the package fails half way through with connection failed issue.
Plus it gives us something like this: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER
Has anyone ever experienced this issue, do you have any possible solutions?
Thank you!
Anastasia
View 4 Replies
View Related
Dec 29, 2006
Hi,
We are using Microsoft Reporting Service 2005 to develop reports and we are accessing these reports through a J2EE application.
The front end is implemented using Tapestry and we using JBoss as our applicaiton server.
We are using Shared Data Sources for the reports and we set its data source type to SQL Server Analysis Services.
In the credential tab, by default "Use Windows authentication" is selected. All other options are disabled.
When I access my reportserver through my web application, I am always prompted for a windows login and password.
How can I avoid being shown the windows login prompt, since our web application will be used by several users and we do not want the users to type in a username/password everytime they want to access our reports.
Please suggest me solution for this scenario.
Thanks in advance!
View 3 Replies
View Related
Jan 23, 2001
I have created linked servers and successfully run the following stored procedure.
exec [db-2001server].sales..sp_test
Can anyone give me the exact syntax for running the same from command promt(without using the query analyzer).I am new to isql/osql.So,please help me with the syntax.
Thanks!!
View 1 Replies
View Related
Jun 30, 2006
How can I login to SQL Server Express instance(localhostSqlExpress) using command prompt so that I can query database. Is there any alternative GUI tool for SQL Server Express Manager? (I think Microsoft has discontinued SQL Server Express Manager). I prefer using Command Prompt. I am using WindowsXP Professional.
View 8 Replies
View Related
Sep 26, 2006
I want to install the SQL Server Express Edition silently at command prompt (but want the dialog boxes, I mean with /qb option), locally, with no network options.
I want to install it with following options
i) In the Feature Selection, I need
a) Data file (Database Services)
b) Shared tools (Database Services)
c) Connectivity Components (Client Components)
d) Management Studio Express (Client Components)
ii) Instance name as €œDefault Instance€?
iii) Service Account as €œUse Built-in service accountà Local System€?
iv) Authentication Mode as €œMix mode€? with sa password as €˜sysadm€™
v) Collate Settings as €œLatin1_General_CS_AI
How could I achieve this using command prompt?
I already had done
start /wait setup.exe /qb ADDLOCAL=ALL SECURITYMODE=SQL SAPWD=sysadm SQLCOLLATION=Latin1_General_CS_AI
any other attribute need to add?
Regards,
Thanks.
Gurpreet S. Gill
View 10 Replies
View Related
Sep 30, 2015
SQL Server 2012 Replication. The command prompt instance of the replication is being run as the same user as the SSMS "version" using the runas option. With SSMS the error is that the client is missing a privilege. There is no error when it runs from the command prompt. All runs well.
We have reinstalled the replication feature.We have gone through several MSDN articles that indicate exactly what privileges (both within the DB and in Windows) that service account should have. None have worked Incidentally, when I create a new publication and indicate that the SQL Server Agent be used , the publication runs.
View 0 Replies
View Related
Jul 20, 2015
How to restrict a user do not connect sql server from command prompt.
I want to restrict my sql server do not connect from command prompt i.e providing server ip address and server credential.
How to secure my server data base do not connect from dos command.
View 13 Replies
View Related
Sep 21, 2007
I just started using SQL 2005 and having a bit of struggle.
I'm having difficulty trying to use the .ini file to install sql express. This is the command I use in Command Prompt:
start /wait expresssetup.exe /settings setup.ini /qn
echo %errorlevel%
Then I get an error level of €˜-204€™, which I couldn€™t find the meaning on the internet or anywhere else.
But when I move the parameters from the .ini file to the batch file and the process worked. SQL started installing, until it comes to the SQL Server Database Services component. Then I get the following error message:
SQL Server Setup could not validate the service accounts. Either the service accounts have not been provided for all of the services being installed, or the specified username or password is incorrect. For each service, specify a valid username, password, and domain, or specify a built-in system account.
Here is how my batch file looks with parameters:
start /wait expresssetup.exe /qb
INSTANCENAME=€?EXAMPLE€?
ADDLOCAL=All SAPWD="difficult"
INSTALLSQLDIR="C:Program FilesMS"
INSTALLSQLDATADIR="C:Program FilesMSData"
SECURITYMODE="SQL" SQLACCOUNT="user"
SQLPASSWORD="password"
AGTACCOUNT="user"
AGTPASSWORD="password"
SQLBROWSERACCOUNT="user"
SQLBROWSERPASSWORD="password"
Please, can anyone help? I don't know what to do anymore.
Thanks.
Regards,
Akwest
View 3 Replies
View Related
Feb 20, 2008
Hi,
I would be very grateful if someone could take a look at my command line install and offer advice on if I am doing it correctly.
The reason I am asking is because I cannot seem to get the server installed without having errors during the installation:
"The SQL Server (MSSQLSERVER) service terminated with service-specific error 17113 (0x42D9)"
Looking at the server error log indicates that master.mdf was not in the data directory (I have however specified a different data directory for ease of backup by our software and this is created during the install but does not have this database in the data directory - it is however in the template data directory!
I also get this error when the SQL Server service is started:
"The SQL Server (SQLEXPRESS) service terminated with service-specific error 3417 (0xD59)."
All advice is welcome. Please see below my batch file. Also, if you think I should do this in a different way then please let me know. I basically want to install SQL server on a customer computer and automate the install so the custoemr does not need to enter any information.
The goal of this install is:
[1] Deply a custom .Net application and SQL server at the same time on the same computer without user input.
[2] Allow remote .Net applications (designed by myself also) to connect over a LAN (and later maybe over a WAN) to the database to the above database.
The command line is this (I have also included the batch file I am usign below). For ease of reading I have put the parameters on a new line below:
setup.exe /qb
username="CustomerUsername"
companyname="OurCompany"
addlocal="SQL_Engine,SQL_Data_Files,SQL_Replication,Connectivity,SDK"
disablenetworkprotocols="0"
instancename="MSSQLSERVER"
INSTALLSQLDATADIR="c:SqlData"
USESYSDB="c:SqlData"
SAVESYSDB="1"
SQLAUTOSTART="1"
SECURITYMODE="SQL"
SAPWD="#StrongPaSSword#"
======= Batch file Start ======
SET MODE=/qb
SET SETUP_EXE=sqlfilessetup.exe %MODE%
SET SQLDATADIR=c:SqlData
SET SET_USERNAME=username="CustomerUsername"
SET SET_COMPANYNAME=companyname="OurCompany"
SET SET_ADDLOCAL=addlocal="SQL_Engine,SQL_Data_Files,SQL_Replication,Connectivity,SDK"
SET SET_DISABLENETWORKPROTOCOLS=disablenetworkprotocols="0"
SET SET_INSTANCENAME=instancename="MSSQLSERVER"
SET SET_INSTALLSQLDATADIR=INSTALLSQLDATADIR="%SQLDATADIR%"
SET SET_SAVESYSDB=SAVESYSDB="1"
SET SET_USESYSDB=USESYSDB="%SQLDATADIR%"
SET SET_SQLAUTOSTART=SQLAUTOSTART="1"
SET SET_SECURITYMODE=SECURITYMODE="SQL"
@REM === RE-INSTALL PARAMS - NOT CURRENTLY BEING USED?? SHOULD I ADD THESE ALSO? ===
SET SET_REINSTALLMODE=REINSTALLMODE="omus"
SET SET_REINSTALL=REINSTALL="SQL_Engine,SQL_Data_Files,SQL_Replication,Connectivity,SDK"
SET SET_REBUILDDATABASE=REBUILDDATABASE="1"
SET SET_SAPWD=SAPWD="#StrongPaSSword#"
@REM === START THE SETUP / RE-INSTALL ===
START %SETUP_EXE% %SET_USERNAME% %SET_COMPANYNAME% %SET_ADDLOCAL% %SET_DISABLENETWORKPROTOCOLS% %SET_INSTANCENAME% %SET_INSTALLSQLDATADIR% %SET_USESYSDB% %SET_SAVESYSDB% %SET_SQLAUTOSTART% %SET_SECURITYMODE% %SET_SAPWD%
======= Batch file End ======
Your advice is kindly welcome.
Thank you
Kind regards
Paul
View 2 Replies
View Related
Nov 23, 2007
Hi,
I am accessing my reports through one aspx page designed by me.
in that i am using webservice to render the report and
linking the url of the report to reportviewer
it is working fine
but for the first time it is asking username & password of the reporting server to render the report.
i am using Reporting Services 2000
plz help to avoid this user name & password prompt.
View 7 Replies
View Related
Dec 7, 2000
Can anyone tell me how to enable bcp utility. Because anytime I try to run BCP I get the following error messages: (BCP not enable). Also how can I get to SQL Server command prompt? I look forward to hearing from anyone.
View 2 Replies
View Related
Oct 17, 2000
Sorry for the new thread.
How to run a DTS job from command prompt? Any help is appreciated!
Thanks.
View 1 Replies
View Related
Feb 23, 2006
I have a Microsoft SQL server that is setup, and inside it is a job. Inside the job is a bunch of lines of transact sql statements.
I would like to be able to start the job from the command prompt. Moreover, I do not want to have to create new files or modify anything that is existing. I just want to be able to have it set up so that a new user who installs the server and all of the job on their machine fresh, can just punch in the command to run the job.
I know I can copy the transact sql statements from the job, and run them through the command prompt, but that would be a poor way to do it, because if the statements in the job were ever modified, with this task being automated, the command prompt statements would be out of date.
So I just need a way to start the existing job from the command prompt. Is this possible? Maybe with OSQL?
View 4 Replies
View Related
Jun 18, 2008
Please let me know how to install sql server by using command prompt.
View 4 Replies
View Related
Mar 26, 2008
I am have trouble configuring developer edition when trying to run a Bulk Copy through Command Prompt. I have configured remote connections within the surface area configuration and have created a firewall exception
I enter and run
bcp FileImportDB..Exam in "c:FileImportPracticeExamImportFile.txt" -T -c
then i get the following error message
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersDineen>bcp FileImportDB.Exam in "c:FileImportPracticeExamImportFile.t
xt" -T -c
SQLState = 08001, NativeError = 2
Error = [Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].
SQLState = HYT00, NativeError = 0
Error = [Microsoft][SQL Native Client]Login timeout expired
SQLState = 08001, NativeError = 2
Error = [Microsoft][SQL Native Client]An error has occurred while establishing a
connection to the server. When connecting to SQL Server 2005, this failure may
be caused by the fact that under the default settings SQL Server does not allow remote connections.
I am running developer edition on vista and Service pack 2, iam connecting to my instance with no problem.
Can someone please help
Kind regards
Rob
View 6 Replies
View Related
May 10, 2006
The program shortcut "Visual Studio 2005 Command Prompt" seems to be mising from the "Visual Studio 2005 Command Prompt" Start menu added by the current Microsoft SQL Server 2005 Express Edition Toolkit. Where is it? How to workaround?
I am trying to do Download details SQL Server 2005 Samples and Sample Databases (April 2006) -> GettingStartedWithSQLSamples.htm which says "a. Open a Microsoft Visual Studio 2005 command prompt. Click Start, point to All Programs, point to Microsoft Visual Studio 2005, point to Visual Studio Tools, and then click Visual Studio 2005 Command Prompt." but I can find no such command prompt within "Visual Studio Tools", only "Visual Studio 2005 Remote Debugger{, Configuration Wizard}".
What's wrong? How to fix or workaround? I'd install .NET SDK 2.0 to get it's Command Prompt but that's about 570MB merely for a command prompt!
Thanks for your help, -Mike Parker
View 1 Replies
View Related
Jul 25, 2006
I have a requirment, when a user logs in to the pc, I want to run some SQL scripts which is been saved as a stored procedure on another pc. Could this be possible. I know in oracle you could do it using SQLLDR. Is there any way to do it in SQL?
Please advice. Any help is greatly appreciated.
View 3 Replies
View Related
Sep 13, 2000
Is there a way by which we can execute the backing up of database from the command prompt......
Suppose i need to do the below task. I can write a stored procedure and schedule it. But the situation demands to run from the command prompt. Is there a way out.
-- Create the backup device for the full MyNwind backup.
USE master
EXEC sp_addumpdevice 'disk', 'MyNwind_2', 'c:mssql7ackupMyNwind_2.dat'
-- Back up the full MyNwind database.
BACKUP DATABASE MyNwind TO MyNwind_2
-Rajesh
View 2 Replies
View Related
Jan 7, 2001
How to import database in command prompt?
View 1 Replies
View Related
Oct 11, 1999
We have a development server that will only run SQL Server from a DOS command prompt. Each time I reboot the server the services don't autostart, and I am unable to start them manually using Service Manager. Does anyone know what I can do to fix this problem?
Thanks
View 1 Replies
View Related
Feb 13, 2004
Hi,
I try to backup DB (DatabaseA) in ServerA using sqlmaint utility in command prompt.
The sqlmaint.exe does reside in ..MssqlBinn Folder.
Below is the command i used (MS-DOS):
..Binn>sqlmaint -S ServerA -U "sa" -P "########" -D DatabaseA
-BkUpDB C:Temp -HtmlRpt BackupRpt.html
When I execute the command, it only shows a list of the commands as if I execute -? command. There's NO any other messages that indicate the backup command is being executed.
When I check in the C:Temp folder, there's no BackupRpt.html file.
Anyone got any idea?
Thanks.
View 5 Replies
View Related
Jun 25, 2014
How can i get the output (like 1 rows(s) inserted)in a file from an input file through sql command prompt.
View 1 Replies
View Related
Nov 15, 2007
Hi,
I wanted to know if there is a way to execute sql commands on the operating system's command line. If it is possible, then how do we do it ? For example to execute a SELECT * from Table statement what are we supposed to do ?
Thanks
S
View 2 Replies
View Related
Aug 8, 2007
i have a problem installing SQLEXPRESS via command prompt... the installation is successful but the 'sa' account could not login to the server.. here's the command in my batch file.
Code SnippetStart /wait <exe> /qb INSTANCENAME=MYINSTANCE ADDLOCAL=ALL *AUTOSTART=1 RSCONFIGURATION=DEFAULT SECURITYMODE=SQL SAPWD=sapwd SQLCOLLATION=Latin1_General_BIN requiresmsiengine=1
and one more thing, i need to run the report server automatically.. thanks!
View 2 Replies
View Related
Aug 14, 2005
Hi,I am trying to install MSDE from a CD. At the beginning I cunpack all files at C:sql2ksp3. Then in in Command promptI enter C:sql2ksp3MSDE> Setup SAPWD=Hello SecurityMode=SQL The problem is that nothing happens after that. When I press enter another line appears C:sql2ksp3MSDE>but that's about it.The installation does not continue. Does anybody know how to "push" it a bit so it will continue?Thanks
View 1 Replies
View Related
Feb 24, 2008
All, I am developing the data mart refresh task in SSIS. I wanted to call the package in command prompt. I need help. Can any one give any tips on it. Thanks and appricate in advance.
Regards
Govind
View 2 Replies
View Related
Dec 17, 2007
Hi,
We have requirement where we need to run the SSRS report from Command Prompt. We are using Control + M, which is a scheduler runs only from DOS prompt.
Can anyone help us to know the procedure of doing this.
Thanks
Karthik
View 1 Replies
View Related
Mar 21, 2007
Hi,
I need to install a customed SQL server express instance on the client's computer by using the Command prompt installation. I've already defined the security settings and everything i need but i was wondering if is possible to attach a mdf database during the installation. Perhaps there is a paramenter i can include in the in the ini file.
Thank you
View 6 Replies
View Related
Apr 24, 2007
Iam trying to connect to local copy of sql sever express from the command prompt with this command(sqlcmd) but i get the error below. What should i do to overcome the error. Basically what i want to do is to try out some commandline backup utilities and i deadly want to know how to do a backup from the command prompt. Help is greatly appreciated.
HResult 0x2, level 16, state 1
Named pipes provider: could not open a connection to sql sever [2]
sqlcmd: Error: Microsft sql native client: An error has occurred while estarblishing a connection to the sever. When connecting to sql sever 2005, this failure may be caused by the fact that under the default settings SQL sever does not allow remote connections..
Sqlcmd: Error: Microsoft sql native client: Login time out expired.
View 3 Replies
View Related
