SQL Server Agent Job Disabled When Currently Running
Dec 5, 2007If a job is currently running and I want to disable it so that it does not run as scheduled for the following night, will it disrupt the current process?
View 1 RepliesIf a job is currently running and I want to disable it so that it does not run as scheduled for the following night, will it disrupt the current process?
View 1 RepliesIt's a Windows 2000 Server box with SQL 2000 on it. MSSQLSERVER &SQLSERVERAGENT services are logged in as valid domain user. I set up amail profile for that user, and can send email via Outlook 2003.However, when I go to the SQL Agent Properties in Enterprise Manager,Mail Profile is disabled.I've restarted the services & even tried rebooting the server. Thisworks on my other servers, but they're Windows 2003. Not sure ifthat's the problem though.Anybody have any clues?
View 1 Replies View Relatedwhen I run a package from a command window using dtexec, the job immediately says success.
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 3:37:41 PM
Finished: 3:37:43 PM
Elapsed: 2.719 seconds
However the Job is still in th agent and the status is executing. The implications of this are not good. Is this how the sql server agent job task is supposed to work by design.
Thanks,
Larry
How to configure alert when SQL Server Agent Job gets disabled. I want to get notified when Agent Job gets disabled.
View 2 Replies View RelatedIs there a way to find out who enabled or disabled a SQL server agent job?
View 3 Replies View Relatedi'm running a SQL Server 2000 SP42000.8.00.2039, developer.
i'm trying to setup a merge replication between the default istance and a named one of the same machine, using the same domain account for both publisher and subscriber.
when it comes to "start synchronizing" (right click on the subscriber merge agent), i found it disabled, just like it is running, but it is not (the icon shows a stop sign, even refreshing.)
The state is "disactivated". When i stop sync and start it again things don't change.
If i setup a "pull" subscription, i get a sequence of a message like "interface not supported" (a translation from italian "Interfaccia non supportata"): after 10 attempts, it stops.
i cannot find this error searching in internet, could you address me?
thanks in advance!
It is SQL server 7. Scheduled jobs were running fine until the hard drive crasked. Replace the hard drive and restored the dabases. However, all the scheduled jobs cannot run. I created new jobs using database maintenance plan and it still doesn't work. the same error occurs when viewing the Job history.
sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
However, if I create a job by right click on the database and select backup database. This job runs fine.
What should I do to make jobs created by the database maintenance plan running again?
Thank you for your help.
I've tried finding an answer to this on this website but I don't see any. I'm running SQL Enterprise Manager v8.0 and have a job in the SQL server agent folder that won't run as scheduled nor will it run manually if I Right-Click and choose Start Job.
It's designed to run a DTS. I can run the DTS manually without errors but the job won't run it for me. I will try to provide as many details in this post as I can in hopes that someone who is more experienced at this can help me.
DTS DETAILS
The DTS is designed to transfer data from a table on one server and transfer it through a firewall to another server into a table on that server. Then delete the entries from the originating table. This works very well if I run it manually. The purpose of deleting entries from the web server is for security. Once the data in on the other side of the firewall it's safe.
The job however will not run either manually or from it's schedule. I've tried creating a new job and setting up a very simple schedule that runs daily every 2 minutes for example. I've played around with different times but no luck. So I will try and provide you with job details below:
JOB DETAILS
Name: TransferData
Enabled, Target = Local Server
Category: Uncategorized Local
Description: Execute package: TransferData
STEPS
ID: 1
Step Name: TransferData
Type: Operating System Command
On Success: Quit with Success
On Failure: Quit with Failure
PROPERTIES OF STEP
Step Name: TransferData
Type: Operating System Command (CmdExec)
Command: ( I have no idea what this translates to as I did not write it) DTSRun/~Z0xF6EE76ED6259A60AC370F465DE7F3095F4B37F7176C05B8E72E396DEBE60135E53ACFEDB00E1F216DD8EC8206782439BA435771E3C1E8A7A5D0DAE3F3AAA9F48BF08A9A9FA23C010A85573546F6B6B900323F76DC8A27EACAFD63904464DD5A9B28137
Nothing special in the advanced tab
SCHEDULES TAB
ID: 20
Name: TransferData
Enabled: No
Description: Occurs every 1 day(s), every 2 minute(s) between 12:00:00 AM and 11:59:59 PM
and is setup as Recurring
Nothing in Notifications Tab
I only have two SQL books to reference. This is a production fire to put out and I really need the help here as I am not a certified SQL guru.
I hope I have provided enough information here for someone to help. I'm happy to provide an email address for easier contact should you request it.
Thanks in advance for any assistance with this.
Hi,
I ahve attached the bmp doc that will show my screen snapshot.
My SQL server Agent service indicator is not showing green as like other server. I have started the serice and running fine. I don't have any problem running the job.
My curious is why that indicator is not showing up.
Thanks,
Ravi
I get the following error:
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft JET Database Engine" Hresult: 0x80004005 Description: "'I:MyFolderMyRptsMyApplicationMyDatabase.mdb' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides.".
The above path "I:...." is mapped on the server that SQL Server is running on.
This package runs with NO problems in MS Visual Studio.
HI ALL
I have created a stored procedure for a routine task to be performed periodically in my application. Say, i want to execute my stored procedure at 12:00 AM daily.
How can I add my stored procedure to the SQL server agent jobs??
Any Idea..
Hi. I was wondering if anyone has ever had a problem where nothing seems to be wrong with the server, and SQL Server Agent is up and running, but jobs fail. We had a job run at midnight, and it was the last successful run. Every job failed after that, with an error stating "Unable to retrieve steps for job..." There doesn't seem to be any reason for the problem. The jobs were kicked off manually and they all ran.
The only other error messages we could find were in the Application Event Viewer on the server. But the first error happened days ago and said this: "The description for Event ID ( 0 ) in Source ( .NET Runtime ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Unable to open shim database version registry key - v2.0.50727.00000."
Since then, every few seconds this error occurred: "Windows cannot load extensible counter DLL MSSQLServerOLAPService, the first DWORD in data section is the Windows error code."
We turned off the performance monitor counters and that error stopped. But we still have no idea if that was the cause of the problem.
This isn't the first time we've had an issue with jobs failing because the steps couldn't be 'found', while SQL Server Agent was up and running.
Has anyone else had this problem?
Thanks!
Hi All,
I was working on some reports on SSRS. Now I cant view those reports coz I can not open report manager.
I noticed that SQLSERVER and SQL Server agent has stopped running in my local machince. But Other services are running properly (SSIS, SSRS, SSAS). When I go to SQL Configuration manager and try to run them, I get the following error massege.
" The request failled or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details. "
So now I can not connect database engine in my local machine through management studio. When I try to do that, I get the following error massage.
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)"
Also I can not access reportserver data base and reportservertemDB.
If I reinstall SQL Server again, what would happen? Would I still be able to use and view my old reports?
Please can anyone help me to get this worked again correctly?
Thanks
I get 2 errors when I run a job in sql server agent 2005 0xc0202009 and 0x80040E2. I cannot see why I am getting these errors, when I run the job with dtexec it is successful. Also when I run it in the debugger or run the executeable it is successful. But when I try to run it with the agent it fails. Any Ideas would be greatly appriciated.
thank you
Joey Kushinski
Okay, i've got an ETL package which works flawless, we've created a scheduled job for it which also worked.
This ETL accesses a flat file located on a server on a different location in the same domain.
Last week we start a migration to a new network, the location where the flat file is stored has already moved to the new domain but the SQL server agent is still on the old domain.
There is a trust between the 2 domains, the network user from the old domain has been added on the server in the new domain where the flatfile is located.
If i run the etl package manually it works flawless, now if i run the etl using the SQL server agent it won't run anymore.
I get the following error:
Executed as user: OIdDomaindwh. ...n 9.00.1399.06 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 21:15:00 Error: 2007-10-02 21:15:02.10 Code: 0xC001401E Source: Rolmer_Product Connection manager "Flatfile Product" Description: The file name "\fs-cha-fs01dwhproduit.csv" specified in the connection was not valid.
Don't tell me its a problem related to the user that the SQL Server Agent is set to because its set to OldDomaindwh which is the same user i use to login on the server where i can manually run it without problems. The problem only occures when i run it using the SQL server agent which uses the same user to execute packages.
This is a very difficult problem i doubt anyone here will be able to crack this nut, but if they do i'll be very impressed because it would require a real smart network admin with SQL experiance to figure this one out...
Good luck
Hi, I was wondering if anybody would be able to help me and realise by looking round that is a reasonably common problem, but it€™s starting to drive me mad now!!
I€™ve got an SSIS package which takes data from an excel spreadsheet and using a stored procedure updates a table in a database, before moving the spreadsheet to another folder once it finishes. This works fine when in the Business Intelligence Design Studio, but when I try to set it up to run from the SQL Server Agent I get nothing but problems. I€™ve had a look around various forums and seen that many people have had this problem and I€™ve followed advice that other people have given, but try as I might nothing will work for me.
Currently I€™m trying to go down the package configurations route. I€™ve enabled the use of package configurations in the development studio and specified the configuration to pick up the destinations, usernames and passwords of everything that I have in the Connection Managers. I then go to the SQL agent and as a step tell it to execute the SSIS package using the package configuration xml file that it has created. Both the SSIS package and the package configuration file are saved and been asked to run from the sql server I will be using. I then go to run the package and it thinks about it for a minute or so before falling over. The history then says the below:
Message
Executed as user: UKWACALORsql2k5svc. ....00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:35:31 Progress: 2008-05-06 11:36:32.10 Source: Data Flow Task 1 Validating: 0% complete End Progress Error: 2008-05-06 11:36:32.15 Code: 0xC0202009 Source: WiReCAPSLoad1 Connection manager "DestinationConnectionOLEDB" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E4D Description: "Login failed for user 'sa'.". End Error Error: 2008-05-06 11:36:32.15 Code: 0xC020801C Source: Data Flow Task 1 Destination - cstCAPSLoad1 [32] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "DestinationConnectionOLEDB" failed with error code 0xC0202009. ... The package execution fa... The step failed.
The DestinationConnectionOLEDB is pointing at a database on the same server as where I have the SSIS package and configuration file stored. I€™ve gone into the xml file and noticed that the passwords aren€™t saved so I€™ve added the passwords manually into the file after everytime it says username=sa but this hasn€™t made a difference. I€™ve also made sure that the package is saved to dontsaveencrypted.
I€™ve gone through the following article:
http://support.microsoft.com/kb/918760
and tried to use things such as credentials but these haven€™t helped either.
I€™m really not sure why its giving me such hassle, I have the SSIS package on the sql server, I have its package configuration on the same server, I have the databases it wants to access on the same server, I€™m using the sa account wherever I can to make sure I have no access / rights issues, so I really have no idea why this won€™t work. All I can think of is that the sql2k5svc account that the sql agent job then runs under doesn€™t have authority to get to the database or the package configuration file, but I€™ve added that account to have full control on the database that it will accessing, but again no joy. How do I change it so that another account can be used to run this, one that I know has all the authority required to access everything it should?? And why would the login for sa be failing when it€™s the highest level account??
I€™ve read so many different articles on this problem and tried to follow so many different resolutions that I really don€™t know how any of this is meant to work anymore!!
Any help would be gratefully received!!
Thanks
Brad
Hi folks!!
I am new to installation of SQL Server 2005..I wanted to know while selecting Service Account Screen why Avoid running SQL Server Agent as the Local System account.????
T.I.A
Hi
I have setup a step in SQL Server Agent to run a SSIS package that I have created. However the step fails straight away and refers me to the history log, which doesnt seem to show what the problem is.
I've tried running the package manually through dtexec.exe and it runs through fine. Does anyone know what the problem could be?
Thanks
Hello,
I have created a package that runs without problem.
I run the package with the command dtexec /F "package_name.dtsx" > package_name.txt.
Then I run the same package from SQL Server Agent, everything is OK
Then, I tried to edit the command line to have the output file, but I got an error.
The command line is:
dtexec /F "package_name.dtsx" MAXCONCURRENT "-1" / CHECKPOINTING OFF /REPORTING E > package_name.txt.
(MAXCONCURRENT "-1" / CHECKPOINTING OFF /REPORTING E are created by default)
How can I do?
Thank
When I give job Id in filter of this query this will give job status of "Success" but actually my job is currently in executing stage. I want to get all jobs that are currently in executing status.
Use msdb
go
select distinct j.Name as "Job Name", --j.job_id,
case j.enabled
when 1 then 'Enable'
when 0 then 'Disable'
[Code] ....
My package is connecting to an external data provider using an OLEDB driver . The package runs fine in debug mode.When i tried to run the same from SQL server agent it failed  to aquire the connection. The OLEDB provider does not contain too much of information , ( connection string, initial catalog, blank user name and password).The same package executes successfully if i run using dtexec in BAT file.But if i use the dtexec in sql server job step as operating system command and try to run, the job will fail reporting " can not aquire the connection".
View 2 Replies View RelatedI recently installed standalone version of SQL 2014 Standard on my work computer. I used Access before but I want to use a SQL server instead.
We have a shared drive that a file gets deposited every day at midnight. I want to be able to get this file and import it to the server (its basically a list of names).
Here what I have done so far:
I created the database
Created the file and successfully imported data into it using the Import Data feature.
I saved the SSIS package
Scheduled an Agent Job for this package to run at certain time,daily
At first the jobs would fail with a Access is Denied. I added a user under Credentials with my network account ( have admin rights on the work computer).Also added a Proxy for the Credential user I made.
Jobs fail with a “Cannot open data file” error. I tried changing things here and there, but I can’t get it to work.
Hello
I'm trying to run a task that executes a script file (cmd). When i run it with in bids with my own users (domain admin) it works. When i start a cmd prompt and try to run the cmd file directly from the network location where it is it works (with my own rights and with the sql server agent user).
Now when i try to run in from smss > agent jobs > job and run job it never completes. Im not getting any error message either it just keeps on running on the step ??? It seems like a rights issue, but the account running the sql server agent is able to execute the cmd file directly from the command prompt.
There are no errors in any error logs anywhere and no error is displayed...
Ps. Im running the job step as a integration service pacgake.
Hi,
I have stumbled on a problem with running a large number of SSIS packages in parallel, using the €śdtexec€? command from inside an SQL Server job.
I€™ve described the environment, the goal and the problem below. Sorry if it€™s a bit too long, but I tried to be as clear as possible.
The environment:
Windows Server 2003 Enterprise x64 Edition, SQL Server 2005 32bit Enterprise Edition SP2.
The goal:
We have a large number of text files that we€™re loading into a staging area of a data warehouse (based on SQL Server 2k5, as said above).
We have one €śmain€? SSIS package that takes a list of files to load from an XML file, loops through that list and for each file in the list starts an SSIS package by using €śdtexec€? command. The command is started asynchronously by using system.diagnostics.process.start() method. This means that a large number of SSIS packages are started in parallel. These packages perform the actual loading (with BULK insert).
I have successfully run the loading process from the command prompt (using the dtexec command to start the main package) a number of times.
In order to move the loading to a production environment and schedule it, we have set up an SQL Server Agent job. We€™ve created a proxy user with the necessary rights (the same user that runs the job from command prompt), created an the SQL Agent job (there is one step of type €ścmdexec€? that runs the €śmain€? SSIS package with the €śdtexec€? command).
If the input XML file for the main package contains a small number of files (for example 10), the SQL Server Agent job works fine €“ the SSIS packages are started in parallel and they finish work successfully.
The problem:
When the number of the concurrently started SSIS packages gets too big, the packages start to fail. When a large number of SSIS package executions are already taking place, the new dtexec commands fail after 0 seconds of work with an empty error message.
Please bear in mind that the same loading still works perfectly from command prompt on the same server with the same user. It only fails when run from the SQL Agent Job.
I€™ve tried to understand the limit, when do the packages start to fail, and I believe that the threshold is 80 parallel executions (I understand that it might not be desirable to start so many SSIS packages at once, but I€™d like to do it despite this).
Additional information:
The dtexec utility provides an error message where the package variables are shown and the fact that the package ran 0 seconds, but the €śMessage€? is empty (€śMessage: €ś).
Turning the logging on in all the packages does not provide an error message either, just a lot of run-time information.
The try-catch block around the process.start() script in the main package€™s script task also does not reveal any errors.
I€™ve increased the €śmax worker threads€? number for the cmdexec subsystem in the msdb.dbo.syssubsystems table to a safely high number and restarted the SQL Server, but this had no effect either.
The request:
Can anyone give ideas what could be the cause of the problem?
If you have any ideas about how to further debug the problem, they are also very welcome.
Thanks in advance!
Eero Ringmäe
Hello everyone,
I recently ran across with a request to check if the SQL Server Agent is running on all the servers, I immediately thought about implementing that with SSIS, since I've accomplished such repetitive task before with using SSIS.
However, I'm unsure on how to do it, my first approach was creating a script that would create a table with all services running on the machine using the DOS "SC" command, now, I don't think that's going to do what I need, since it'll only give me a list with all the services installed on the machine, but there isn't a way to throw a where clause since I get a list of services and its attributes on a single field (See below).
I was wondering if anyone has ran across such request or if anyone has any ideas or suggestions.
This is what I get on my table in a single field when I run the SC command into a # table.
SERVICE_NAME: SQLSERVERAGENT
DISPLAY_NAME: SQLSERVERAGENT
TYPE : 10 WIN32_OWN_PROCESS
STATE : 4 RUNNING
(STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
WIN32_EXIT_CODE : 0 (0x0)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
Thanks,
One thing to keep in mind, I have both, 2000 and 2005 servers on my environment. *
---
http://www.ssisdude.blogspot.com/
I have created a job that runs this code:
exec master..xp_cmdshell 'D:Trace_outputAuto_perfmonAutoperfmon.bat'
This runs fine as long as I place the counter.txt file in the windowssystem32 dir.
The bat file has this code:
typeperf -cf counter.txt -o D:Trace_outputAuto_perfMonautoperf
This starts without any issues and i see typeperf.exe in the taskmanger.
The question i have is how can i stop this without having to go into taskmanager and killing typeperf.exe?
thanks for your time
Hello, I am having a problem with my sql server agent service not working. I have done some research from earlier postings and still having no luck with getting it up and running.
Problem:
"Could not start the SQLSEVERAGENT service on local computer. could be an internal Windows errow or service error.
2006-05-09 14:23:55 - ! [298] SQLServer Error: 6, Specified SQL server not found. [SQLSTATE 08001]
2006-05-09 14:23:55 - ! [298] SQLServer Error: 11001, ConnectionOpen (Connect()). [SQLSTATE 01000]
2006-05-09 14:23:55 - ! [000] Unable to connect to server '\PROBLEMTRACK'; SQLServerAgent cannot start
2006-05-09 14:23:55 - ? [098] SQLServerAgent terminated (normally)
I have reset the password for the 'sa' account and running it and got error: Error 18456: login failed for user Specify a different account to be used.
But when I try it only provides me with the 'sa' account.
My primary goal is to run some DMP ion the databases that I have on the server.
Any help would be appreciated.
Hi,
I'm testing my IS package in my local PC which extracts data from one SQL Server table to another SQL Server database. In BIDS, it's running without error. I also tried it in cmd with DTExec /f "c:package.dts", it also ran ok. I tried assigning it in SQL Agent as job. with same command DTExec. This time, it ran successfully but got 0 rows. I dunno what went wrong, why suddenly it cannot get data from the source.
Any idea?
thanks!
cherriesh
Hi everybody.
Need help with secuity
1. SQLAgent servive = domainMy_local_admin
2. Job created
Ownner: domainSQLDBA
step1
exec sp_Who2
step2
Run DTS
a)Connect to ANOTHER_SQL_SERVER USING windows authentication
b) truncate table xxx
3. Run daily every 1 hr
1. Who will run job, domainMy_local_admin or domainSQLDBA ?
2. What account will be used to connect to ANOTHER_SQL_SERVER in step2
thank you
We have a DTS which loads files using FTP to another
server. This will be used by app groups and will be run
via click of button using sp_start_job,
Somehow the userid running the job gets "not sysadmin to
run cmdshell.." Top fix that, we granted it to execute the
xp_cmdshell and also created a proxy account for SQL Agent
which is an admin on server and sql. However, still we get
permission errors like "...The needed permission is
missing to run command shell.." Please help . The DTS is
being called from SQl Agent job and we don't want an admin
ID to be used .
Hello,
I'm new here and hope you will be able to help me.
I have created several SSIS packages with Visual Studio 2005.
They all work fine in debug mode.
I have been able to make them work with a ODBC connection by using a ADO.NET connection.
Then I exported them to the file system in my SQL Server 2005 database and created a task in SQLAgent to run them.
All the packages using the ODBC connection fail with the following error :
Login failed for user XXX
Error : 18456; Severity : 14 , State : 8
This error is a password mismatch.
I tried several database users and checked the passwords multiple times.
It looks like SQL Agent is not able to retrieve the password although it is stocked in both the ODBC connection and the SSIS connection.
Can you help me?
Thanks,
Ares
I’m trying to write a script that will detect long running agent jobs.
Having looked at this article:
http://www.databasejournal.com/features/mssql/article.php/3500276
It appears that agent job job id’s don’t necessarily get stored in the programname of the sysprocesses table. This is true if the agent executes an os command. It also appears that job steps do not get stored in the sysjobhistory until the step is complete so that cannot be used accurately.
Does anyone know of an effective way to find if there are long running jobs other than these methods?
I have a problem when i Want to run the Snapshot Agent in SQL Server 2005. I have done all the tutorial called Replication Data with Mobile Clients and i done the previous tutorial called : Preparing the Server for Replication. But in the Lesson One i can't run the Snapshot Agent but the publicationis good. Can you help me ?
This is the error's code :
Date 25/04/2007 10:44:27
Log Job History (NTI-PC-118-AdventureWorks-AdvWorksSalesOrdersMerge-2)
Step ID 2
Server NTI-PC-118
Job Name NTI-PC-118-AdventureWorks-AdvWorksSalesOrdersMerge-2
Step Name Run agent.
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
2007-04-25 09:44:28.29 -Publisher NTI-PC-118
2007-04-25 09:44:28.29 -PublisherDB AdventureWorks
2007-04-25 09:44:28.29 -Publication AdvWorksSalesOrdersMerge
2007-04-25 09:44:28.29 -ReplicationType 2
2007-04-25 09:44:28.29 -Distributor NTI-PC-118
2007-04-25 09:44:28.29 -DistributorSecurityMode 1
2007-04-25 09:44:28.29 -XJOBID 0x893D7BB9E72044489F0A1C1878663E1D
2007-04-25 09:44:28.29 --------------------------------------
2007-04-25 09:44:28.29 Connecting to Distributor 'NTI-PC-118'
2007-04-25 09:44:28.43 The replication agent had encountered an exception.
2007-04-25 09:44:28.43 Source: Replication
2007-04-25 09:44:28.43 Exception Type: Microsoft.SqlServer.Replication.ReplicationAgentSqlException
2007-04-25 09:44:28.43 Exception Message: The remote server "NTI-PC-118" does not exist, or has not been designated as a valid Publisher, or you may not have permission to see available Publishers.
2007-04-25 09:44:28.43 Message Code: 14080
2007-04-25 09:44:28.43
Thanks you