SQL Server Agent SSIS Job: Set Values Drops Leading Quote
Jul 19, 2006
We are using BCP in a Process task. The value for the path to BCP's error log requires double quotes around it. We initially put this value in a configuration file, and that worked fine. Yesterday, we eliminated the config file and tried to use the "Set Values" tab of the SSIS SQL Server Agent job to pass in this value.
The package variable was assigned the value of the path -- all except for the leading double quote. The closing quotation mark was included in the value.
We tried adding a second double quote at the beginning of the value, but that caused the job to fail immediately.
For now we will work around this problem by putting the quotes around the value in a Script task inside the package.
Has anyone else encountered this problem?
Thanks,
Ron
View 2 Replies
ADVERTISEMENT
Mar 7, 2007
I've written an SSIS package which has two DataFlow tasks running simultaneously, importing the data from two separate ASCII files into two staging/prep tables: one Tasks imports records into an ORDER table while the other Task imports the ITEM-level records into an ITEM table.
Starting several days ago, the ITEM DF Task began importing a partial set of records even though the ASCII file clearly showed more records were available.
For example, in today's processing, here is the message from SSIS: << [ITEM Ascii File [1695]] Information: The total number of data rows processed for file "\webserv01globalscapeusr vr logstandarditem.txt" is 217361. >> yet i only found 10,401 rows -- and they all appeared to be the bottom 10,401 rows of the incoming ASCII file.
I cannot see any other untoward messages about SSIS encountering a problem.
There are no Error Output restrictions on the ASCII file.
The ASCII row preceding the 10,401 rows i DID get looks OK.
Can anyone suggest a possible place to look which might explain this "jumping" over the nearly 207,000 rows?
Thanks very much.
Seth J Hersh
View 7 Replies
View Related
May 22, 2007
I am migrating mainframe data to SQL Server 2005 and have found that from a mainframe character field with leading zeros for example the value of 00023 to a SQL Server column defined as varchar (5) the resulting column value is 23 not 00023. I need the leading zeros because these are account ids, etc. So the value is 00023 not 23. Is this some setting in SQL Server 2005 that needs to be changed or what? This is not a numeric field on the mainframe or a numeric column for SQL Server.
View 11 Replies
View Related
Feb 15, 2006
Hi All,
I'm having trouble importing a CSV file into SQL using SSIS. The trouble seems to stem from truncation and from quote encapsulated fields.
Firstly it's worth noting that some of the data within the quotes contains the separator. E.g.
12,"some text, and a comma",34
Thankfully SSIS seems to cope with that by specifying " as the Text Qualifier. My next problem was that the SSIS Import and Export Wizard gave an error: "failed because truncation occurred". But I fixed this by specifying the OutputColumnWidth for the NCHAR and NVARCHAR type columns to be the width from the table definition.
But now I have another problem with the length of fields. Consider the following where the center column is NCHAR (22)
101,"some text, and a comma",303
102,"some ""quoted text"" bye",303
The first row has the correct width (once the encapsulating quotes are stripped out), but the second row does not, because it seems that when I exported the table the export wizard escaped the quote characters within encapsulated strings using quote characters. So I am back to getting the "truncation occurred" error. How can I get around this within SSIS?
Cheers,
Tim.
View 1 Replies
View Related
Jul 20, 2005
Hey,This is what I would like to do:===========Declare @chvBOLNumberSet @chvBOLNumber='0001234'Select * from BOL where BOLNumber=@chvBOLNumberI want to return the row/rows when BOLNumber=1234============The problem is the leading zeros. @chvBOLNumber can be 01234 or 001234 or ...Hope the above makes sense. How can I do this ? (probably using wildcards)Thanks, John
View 2 Replies
View Related
Dec 12, 2014
We have an issue with importing a CSV file into SQL where using a double quote " text qualifier is failing. The data is correct but it fails on a particular line, complaining about the qualifier even though the qualifier is in place and previous lines have imported fine.
View 3 Replies
View Related
Apr 24, 2007
We have problems with SSIS flat file adapter.
We try to import file which contains next sort of data:
"1";"ABC";5
"2";"A""BC""";5
"3";"A""B;C""";5
The resulting table must be:
f1 f2 f3
1 ABC 5
2 A"BC" 5
3 A"B;C" 5
How can we get this result?
p.s.
We tried to use "SQL Server SSIS Sample Component: UnDouble" but the result was unsuccesfull.
View 11 Replies
View Related
May 16, 2007
Here's a weird one:
We are setting up a job for the SQL Server Agent via SSMS. The Job Step Type is SSIS.
In the Job Step Properties window, on the Set values tab, you can enter Values to override your package variables - normally all well and good.
However in this particular case, the variable Value contains semicolons ( - it is a Connection String for an ODBC driver. Eg: Driver={Client Access ODBC Driver (32-bit)};system=MYSERVER;...
The behaviour for this Value is weird:
If the Value is not surrounded with double quotes ("), the job fails with "The command line parameters are invalid."
If the Value is surrounded with double quotes ("), the job will run as intended. The catch is: that entry and any subsequent "Set Values" entries disappear next time the Job Step Properties window is opened.
This looks like a bug with the parsing of those strings by the Job Step Properties window?
Or am I missing something?
Mike
View 5 Replies
View Related
Aug 28, 2007
Does anyone have a good strategy or technique for preventing database drops in SQL Server 2000? I know in 2005 DDL triggers rock, but in 2000 what can you do to audit who drops a database why keeping the same permissions intact.
Jason
View 3 Replies
View Related
Apr 10, 2007
Dear All,
I'm using SSIS package to extract text file, and load into SQL Server. I test the SSIS package import manually, it works. Then I'm using SQL Server Agent to set up schedule. According to the log, the job agent work at the scheduled time, yet job agent throw out the error message.
Message1:
The job failed. The Job was invoked by User sysAdmin. The last step to run was step 1 (Extract Data).
Message2:
Executed as user: SQLSERVERsysAdmin. The package could not be loaded. The step failed.
Now I only have 1 step and set up "on success action" then "quite the reporting success". Any clue? Thanks
will
View 11 Replies
View Related
Apr 9, 2007
Hi Everyone:
I would like to find out, if there is something I can implement/or should I need to implement to avoid running two concurrent processes of 1 SSIS Package. I mean by default, I will schedule the SSIS package to run utilizing SQL Server Agent. But How I avoid/prevent it to run concurrently or what do I need to setup where I only allow 1 instance of my package to run. Thanks.
View 10 Replies
View Related
Apr 5, 2007
Dear All,
My SSIS package is "Extract" data from Oracle and Load into SQL Server.
The SSIS package does not run when I call the SSIS package from a SQL Server Agent job step
I have gone through all the steps in the doc http://support.microsoft.com/kb/918760, but it still doesn't work.
Is it because of connection to "Oracle" database? and SQL Server Agent service could not recognise the Authentication information to Oracle?
Why I am saying this is becuase it works if I change the package to "Extract" data only from SQL Server.
Anyone has experience on this problem?
Many Thanks in Advance
John
View 11 Replies
View Related
May 18, 2007
Hello,
I try to create a SSIS package only use SQL server agent job tasks(some in 2000 and some in 2005) in control flow. Basically if the first secheduled job failed the package will stop. I linked the first and the second job with 'on success' precedence constraint. But when I build or run the package it always return execution success and run the second one. And I know for sure the first job is failed through enterprise manager - management - jobs
Could somebody advice what could possibly went wrong?
Thanks.
Flora
View 7 Replies
View Related
Sep 11, 2007
Please forgive my ignorance, I am by no means a SQL Expert, but have encountered a strange issue.
I have 6 SQL Servers, Primarily SQL 2005 (one older SQL 2000) all loaded on Windows Server 2003 SP1.
We use the servers for a proprietary database that we created which is the backend to a software package we sell.
The issue I have is: We have added a Security account to the servers, and in one case we have granted rights for this account to the TempDB system database. However, whenever we restart this server SQL drops this user account, thus severing connectivity for the app that is relying on that account.
I have set the account as DB-Owner etc, but nothing sems to keep it on re-start.
Any input would be greatly appreciated.
View 4 Replies
View Related
May 28, 2007
I have various ssis packages which need to schadule through SQL server agent, I manage to schadule those packages but every time SQL server agent execute those packages automaticlly they failed ... I went to package log and it gives error that Step one failed, on the other hand if i execute those packages through "Execute Package Utility", they run without any error ...
Please Help...
View 4 Replies
View Related
Sep 6, 2007
I've been looking everywhere for a hint on how to tackle this, but can't get it to work.
I have an SSIS package that I am trying to run from SQL Server Agent.
I have been able to run it fine from the IDE, and from within the Integration Services system on my database server. However when I try to run the package via SQL Server Agent I get the following error:
"Executed as user: MyDomainSQLServer. The package execution failed. The step failed."
The login name is the SQL Server service account, which is a domain account on our domain. The package is set with EncryptSensitiveWithPassword and the password is supplied on the command line via the /DECRYPT flag.
I am thinking that maybe there is a permissions problem with the service account, but I can't find any detailed information about what actual permissions this account requires. I have tried expanding its permissions, but continue to get this error.
How should the MyDomainSQLServer account be configured?
View 4 Replies
View Related
Feb 1, 2007
I have a problem running an SSIS package in a SQL Server job. The package runs fine if I run it from the MSDB location, but if I try to run the job it fails. The job is set to Run as: SQL Agent Service Account. The SQL Service Agent service runs as a domain user SQLExec. I have logged in as this user and run the SSIS package and it runs fine, but if I create a job with only this step it fails. There isn't much information about where there is a problem. Any ideas or ways to troubleshoot this problem would be very much appreciated.
Thanks, john
View 3 Replies
View Related
May 29, 2007
Hi
I hv created a new Job for my SSIS Package... but when i start the job manually it gives me this error below:
"Executed as User:localhost/SYSTEM. THe package could not be loaded.the Step Failed".
i have my package deployed in Storage Packages[MSDB]...
Could you help me on this....
THanks!
Karthik
View 1 Replies
View Related
Feb 9, 2007
Hello
do ne one know how to call a SQL SERVER agent job from a SSIS package?
regards,
Anas
View 1 Replies
View Related
May 13, 2008
I created a SSIS package using VS2005 with the "ProtectionLevel" set to "DontSaveSensitive" . I executed the package and it completed without an error. I then built the package and deployed it to the SSIS inside the folder "MSDB". I run the pakage in SSIS and it worked perfectly. Then I created a job in SQL Server Agent and have it run in a per-set schedule. It failed to run withthe following error:
Message
Executed as user: SRVSOUDB01SYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:11:02 PM Error: 2008-05-12 22:11:03.17 Code: 0xC001401E Source: STDM Connection manager "Target_AS_STDM.abf" Description: The file name "\Svmppodb01OLAP DataSql DataBackUpAS_STDM.abf" specified in the connection was not valid. End Error Error: 2008-05-12 22:11:03.17 Code: 0xC001401D Source: STDM Description: Connection "Target_AS_STDM.abf" failed validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:11:02 PM Finished: 10:11:03 PM Elapsed: 0.422 seconds. The package execution failed. The step failed.
The error mentioned the step in SSIS Package that requires to copy the backup of the OLAP database file "AS_STDM.abf" from the Source Server location (local processing server SRVSPOYDB01) to the Targer Server location (remote production server SVMPPODB01) "Svmppodb01OLAP DataSql DataBackUpAS_STDM.abf". This step worked in the SSIS(SRVSOUDB01) when executing there. Why it is not working in Sql Server Agent(SRVSOUDB01). It also works in VS 2005.
Thanks.
View 3 Replies
View Related
May 6, 2008
Hi, I was wondering if anybody would be able to help me and realise by looking round that is a reasonably common problem, but it€™s starting to drive me mad now!!
I€™ve got an SSIS package which takes data from an excel spreadsheet and using a stored procedure updates a table in a database, before moving the spreadsheet to another folder once it finishes. This works fine when in the Business Intelligence Design Studio, but when I try to set it up to run from the SQL Server Agent I get nothing but problems. I€™ve had a look around various forums and seen that many people have had this problem and I€™ve followed advice that other people have given, but try as I might nothing will work for me.
Currently I€™m trying to go down the package configurations route. I€™ve enabled the use of package configurations in the development studio and specified the configuration to pick up the destinations, usernames and passwords of everything that I have in the Connection Managers. I then go to the SQL agent and as a step tell it to execute the SSIS package using the package configuration xml file that it has created. Both the SSIS package and the package configuration file are saved and been asked to run from the sql server I will be using. I then go to run the package and it thinks about it for a minute or so before falling over. The history then says the below:
Message
Executed as user: UKWACALORsql2k5svc. ....00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:35:31 Progress: 2008-05-06 11:36:32.10 Source: Data Flow Task 1 Validating: 0% complete End Progress Error: 2008-05-06 11:36:32.15 Code: 0xC0202009 Source: WiReCAPSLoad1 Connection manager "DestinationConnectionOLEDB" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80040E4D Description: "Login failed for user 'sa'.". End Error Error: 2008-05-06 11:36:32.15 Code: 0xC020801C Source: Data Flow Task 1 Destination - cstCAPSLoad1 [32] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "DestinationConnectionOLEDB" failed with error code 0xC0202009. ... The package execution fa... The step failed.
The DestinationConnectionOLEDB is pointing at a database on the same server as where I have the SSIS package and configuration file stored. I€™ve gone into the xml file and noticed that the passwords aren€™t saved so I€™ve added the passwords manually into the file after everytime it says username=sa but this hasn€™t made a difference. I€™ve also made sure that the package is saved to dontsaveencrypted.
I€™ve gone through the following article:
http://support.microsoft.com/kb/918760
and tried to use things such as credentials but these haven€™t helped either.
I€™m really not sure why its giving me such hassle, I have the SSIS package on the sql server, I have its package configuration on the same server, I have the databases it wants to access on the same server, I€™m using the sa account wherever I can to make sure I have no access / rights issues, so I really have no idea why this won€™t work. All I can think of is that the sql2k5svc account that the sql agent job then runs under doesn€™t have authority to get to the database or the package configuration file, but I€™ve added that account to have full control on the database that it will accessing, but again no joy. How do I change it so that another account can be used to run this, one that I know has all the authority required to access everything it should?? And why would the login for sa be failing when it€™s the highest level account??
I€™ve read so many different articles on this problem and tried to follow so many different resolutions that I really don€™t know how any of this is meant to work anymore!!
Any help would be gratefully received!!
Thanks
Brad
View 16 Replies
View Related
Mar 12, 2007
Hello All,
My database application has certain stored procedures which are scheduled to run at certain predefined interval (say once everyday). Now to implement this logic I have two options with me, first being to use the EXECUTE SQL TASK of the SSIS package and schedule it using the windows scheduler and the other is to use the SQL Server Agent Jobs and schedule it there itself. Now the current implementation is using the SSIS packages and I even know that the second approach of using the SQL Server Agents Job is better.
The only thing I want to know is whether it makes sense to invest time in converting my SSIS packages (20 in all) to SQL Server Agent jobs or not. Can somebody briefly explain or give some pointers regarding the performance benefits of Agent Jobs over the SSIS packages.
Thanks in Advance
Mitesh
View 5 Replies
View Related
May 22, 2006
I have used DTS in SQL Server 2000 to import an MDB filed (MS ACCESS) of a table. When the table is imported the primary key is lost and the memo field data is completely gone.
I use the tranformation option in the DTS wizard to add the primary key and make sure the data type for the memo field is varchar and has a size of 8000. I need that large size since I am storing lots of html code.
When I preview the data I see the html code that is supposed to get imported. However, when I return all rows from the table in Enterprise Manager the field is empty.
So I tried to manually copy the data from the MS Access Database into SQL Server. Could not figure out if SQL Server has an interface like MS Access to simply copy data into a table. So I linked to the tables from MS Access to the SQL Server table.
When I opened the linked table I see the data in the description field. However, if I return the rows from within SQL Server no data is present.
I have some ASP code trying to read the data in the SQL Server table. However, nothing is returned and when I run the SQL Statement, nothing gets returned. The SQL statement returns all rows. All the other data is present but nothing in the description field.
What am I doing wrong? Any suggestions anyone, please!
TIA
View 1 Replies
View Related
May 29, 2015
I am using SSIS 2012 SP1 to import a comma delimited csv file into a SQL table.
One of the fields carries a time value:
Source = textfile, column=DT_STR(8), value format = "hhmmss", e.g. "011525"
Destination = field in SQL table, data type = time(0)
To get it from the textfile to the SQL table I am:
1.) Creating a derived column called [d_Time of Entry]with the following formula -
SUBSTRING([Time of Entry],1,2) + ":" + SUBSTRING([Time of Entry],3,2) + ":" + SUBSTRING([Time of Entry],5,2)
2.) Performing a data conversion task to convert [d_Time of Entry] from DT_STR(8) to time(0) The upload fails because values that start with a zero, i.e. times before 10am, have their leading 0's stripped before being derived. You can see this because "011525" is derived as "11:52:5" when it should be "01:15:25".
View 10 Replies
View Related
Dec 20, 2007
Sql server agent is running under a domain account that is a member of administrators and domain users amongst others, and the package is executed as the service account. Connecting to servers on the same domain works and when I run it from the msdb package store in ssis (ssis runs under the network service account ...) it will connect to the pop server as well. Permissions, fiddly proxies .. the answer's out there somewhere
View 3 Replies
View Related
Mar 3, 2008
Hi
I have setup a step in SQL Server Agent to run a SSIS package that I have created. However the step fails straight away and refers me to the history log, which doesnt seem to show what the problem is.
I've tried running the package manually through dtexec.exe and it runs through fine. Does anyone know what the problem could be?
Thanks
View 9 Replies
View Related
Oct 1, 2007
I have an SSIS ETL Package that runs perfectly in debugger.
It is saved to the local SQL Server using "rely on server security".
The SQL Server Agent job runs at night and the job fails right at the last step. It is actually loading the data, because I write a record with row counts to an audit table, and they are successfully incrementing.
The real issue to me is that it is failing randomly, sometimes it will run 7 times then fail once, others it will go 2 or 3 days then fail. The job runs at the same time every night, and takes within a minute or two variance.
I've looked at the logs, and done a trace, and I can't seem to find anything that would cause the failure. The closest thing to an error is a join parameter note in the trace that's on tthe MSDB database.
Not a lot to work with, I know... but does anybody have any advice for me? Thank you in advance!
View 2 Replies
View Related
May 9, 2006
HELP! I have been banging my head against a brick wall on this one all this morning AAAAAAGGGHHH!
1. I have an SSIS package that runs a simple SQL script and then updates a few tables by downloading some XML of the web. It runs fine when I kick it off manually under SSMS.
2. I created a SQL Server Agent job to run it every day. This always fails. The error information in the log is useless ("Executed as user: domainuser. The package execution failed. The step failed." - I had already figured that out!). It fails almost straight away, and when I enable logging for the SSIS package, no info is ever logged (text file, windows event log, whatever).
3. Out of desperation I have changed Agent to run under the same domain user account that I created the package with. No use.
My questions:
1. How can I get more detailed logging from SQL Server Agent?
2 Any ideas about why it's failing in the first place.
Many thanks in advance.
Ben
View 17 Replies
View Related
Nov 28, 2007
Hello,
I try to run a job from SQL Server Agent to execute an SSIS package, but it always fails. However, if I execute the SSIS package directly, it will succeed.
The SQL Agent Job History shows "Unable to start execution of step 1 (reason: Error authenticating proxy DB1DB1_CREDENTIAL, system error: Logon failure: unknown user name or bad password.). The step failed."
P.S. DB1 is my server name, DB1_CREDENTIAL is the account creating the credential
The SQL Server Agent Error Log shows "[298] SQLServer Error: 22046, Impersonation error. [SQLSTATE 42000]"
I've created an account on OS and assigned it to a credential.
Then, I created a proxy with the credential and then created the SQL Server Agent job with that proxy.
P.S. My SSIS package protection level is created as "Rely on server storage and roles for access control", because if it is set as "Do not save any sensitive data", package execution will fail even I run it directly.
How can I successfully run SSIS package from SQL Server Agent?
Do I lose any setting steps?
Thanks for help.
Lilia
View 18 Replies
View Related
Nov 21, 2006
Hi,
I have created a SSIS package and tested it in V.Stdio where it runs fine and uploads file on the remote server.
Now I have scheduled it to run as a job in SQL SERVER AGENT as JOB, but it fails when it comes to the upload task?
I am quite sure as it is something with FTP connection string or security, but can't figure it out.
I have simply added the IP/login/password in the connection manager for upload task.
Any help/ guidance would be great.
Thanks,
Ad
View 4 Replies
View Related
Feb 21, 2008
HI,
I am having a strange error coming in SQL server 2005.
I had a DTS package developed in SQl server 2000. Then i had migrated that DTS package to SSIS package using Execute DTS 2000 package. The conversion is successfull.
Then when i manullt execute this package it runs successfully without giving any error.
But then wheh i schedule a SQL server agent job for the same above SSIS package it fails giving me some cryptographic error as follows:
Message
Executed as user: CATOS-CGDBTUW02SYSTEM. ....3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "SQLPassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:01.00 Code: 0x00000000 Source: Execute DTS 2000 Package T... The package execution fa... The step failed.
Not sure why is this happening.
Manually running the SSIS package from Visual studio does not gives error, but the same SSIS package when is been schedule from SQL server 2005's SQL server agent job it fails giving above error.
Please help me out how to rectify whith this.
Thanks.. in advance
Regards,
Ashok
View 3 Replies
View Related
Apr 19, 2006
I created jobs in SQL Server Agent. Inthe jobs I created steps which name is bankdata.But I am having a problem open the step , Following is the error am getting
"Index was outside the bounds of the array. (SqlManagerUI)
------------------------------
Program Location:
at Microsoft.SqlServer.Management.SqlManagerUI.JobSteps.PopulateGrid(JobStepsData steps)
at Microsoft.SqlServer.Management.SqlManagerUI.JobSteps.Microsoft.SqlServer.Management.SqlMgmt.IPanelForm.OnInitialization()
at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.SetView(Int32 index, TreeNode node)
at Microsoft.SqlServer.Management.SqlMgmt.ViewSwitcherControlsManager.OnBeforeSelection(Object sender, TreeViewCancelEventArgs e)"
On the other hand I didn't execute the jobs.Jobs was failed when it start.
Any ideas?
Thanks for your efforts,gul007
View 1 Replies
View Related
Oct 5, 2015
SQL 2012. VS2013..I have created a SSIS package that generated a pdf report and a script task that prints the pdf reportScript task
 Â
 Public Sub Main()    '
       Dim pdfFileName As String = Dts.Variables("User::CUR_ADDACSReport").Value.ToString
       Dim PrintPDF As New ProcessStartInfo
       PrintPDF.UseShellExecute = True
       PrintPDF.Verb = "print"
       PrintPDF.WindowStyle = ProcessWindowStyle.Hidden
       PrintPDF.FileName = pdfFileName
       Process.Start(PrintPDF)
       '
       Dts.TaskResult = ScriptResults.Success
   End Sub
When I run the SSIS package from VS2013 it executes and the report is printed, however when I deploy it to the SQL server as an agent job, the package executes, but the report is not pronted.
View 3 Replies
View Related
