Hi all
I have a mainteenance Server,SQL Server 2000 Installed on that server,every day some time in mid-night Agent it self stoping
What may be the reason...where I have to find out reason for stop.
Any advice and Help is appreciated.
Hi
all i need little help regarding stored procedure.
i have some job say ".one." that runs daily on sql server agent But i have some holiday schedule as well in database
suppose if a holiday come and i want to stop that job on sql server agent on that particular holiday.
can anybody help me writing it ..
how to do it by calling SQL server agent to stop and start with date in stored procedure.
Regards
Does anyone use PeopleSoft and SQL?
I am doing tape backups with Seagate.
Seagate hangs sometimes.
I am planning on writing a command to shut off SQL server then restart it.
i am having trouble with writing the .BAT File
so far:
--start of bat
NET STOP MSSQLServer
NET STOP SQLExecutive
<<call to backup software>> -- (my problem)
net start server
net start executive
-- end of bat
any help would be appreciated
thanks
marlene
We need to Reboot the Windows Server (Windows 2003 Ent.). Let me know how to smoothly stop the SQL Server 2000 Database. What all services needs to be stoped.
Plz let me know the steps..
Thanks in advance,
I have a problem with a server where for some reason when it is rebooted the SQLAgent service does not start automatically. You have to go into control panel, services and start it, even the it is set to Automatic.
Thanking in advance for any ideas??
Hi, I have setup a replication between two servers. And sometimes due to network connection problem, I get error message like :
The subscription to publication 'pub_1' is invalid.
After 10 retries, if connection cannot be made successfully, the Merge Agent will stop running.
How can I start the Merger Agent automatically after it has been stopped?
Hi,
I've created a stored procedure that creates a script to create a number of objects within the database (based on what existing objects are in the database). From Management Studio, this works fine, and the output is exactly as I want it.
I'm now trying to create a job that will execute this stored procedure, and deposit the results into a file somewhere on the server. When the job runs, the script is created in the correct place and is essentially ok.
However, there are a couple of questions I'd like to ask.
Why does SQL Server Agent put a header at the top of the output file? I was hoping to be able to use that output file 'as is' and execute it automatically to recreate my objects when required. (Obviously, I can manually remove the header, but this is an inconvenience in this situation). How do I stop it?
Also, when executed from SSMS, the output is correctly line-spaced. But, the output from the scheduled job adds an extra line between each line of text, which is, again, inconvenient. Why does it do this, and how can I prevent this (again, without manually editting the output)?
Any thoughts and help greatly appreciated.
Cheers
Simon
I have a ssis package that has multiple large lookups without memory restriction. When running the package manually from SSMS on the same server it runs on when running automatically under the job agent, the package errors out when the server memory gets depleted by the loading of the large lookup reference data. One of the messages I get is
"An out-of-memory condition prevented the creation of the buffer object. "
Anyway, the package runs successfully when it runs automatically under the job agent.
I was curious as to why the above happens. Is that a bug or is the run time behavior different under these 2 environments by design.
js40
Hi to all
In sql server there is a query that is making tempdb full.
What I want is resoling this problem but without stoping sql server?
Thanks in advance,
kristinaRR
when I run a package from a command window using dtexec, the job immediately says success.
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 3:37:41 PM
Finished: 3:37:43 PM
Elapsed: 2.719 seconds
However the Job is still in th agent and the status is executing. The implications of this are not good. Is this how the sql server agent job task is supposed to work by design.
Thanks,
Larry
We just moved source server to newer, bigger box ... Windows 2003 and Active Directory ... Snapshot agent worked but distribution failed ... Same login as on older machine, login is sysadm, used DCOMCNFG to allow ability to launch process ... What are we missing?
View 4 Replies View RelatedI need to load the latest csv files from file server , The files are placed in a folder called -
Posted 02022015- --> csv files .
I am able to copy the csv files from filserver using bulk insert (manually) , giving the file location
I am having difficulty picking up the latest folder which is posted on the server and import it into database using a stored proc .
How do I stop a remote query that INSERTS into a local table from being automatically "upgraded" to a distributed transaction?
I am using Windows 2000 server and SQL Server 2000 SP3a on both machines.
I am executing the following statement in Query analyzer.
INSERT MyLocalServer (col1)
EXECUTE MyRemoteServer.Master.dbo.sp_executesql
@RemoteQuery,
@ParameterDefinition,
@Paramter = 'somevalue'
@RemoteQuery consists of a SELECT four-table join, all tables are on the same linked server.
The Linked server has been set up on MyLocalServer using the "Microsoft OLE DB for SQL Server" provider. In the "Provider Options" for the linked server properties I checked "Non transacted updates" and "dynamic parameters". In the "Server Options" tab I have checked "RPC", "RPC Out", "Data Access".
The EXECUTE part of the query runs great (and returns the data very fast) by itself. But with the INSERT part, the query fails and returns the error:
"Server: Msg 7391, Level 16, State 1, Line 17
The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a]."
The two servers are seperated by firewalls, so I believe the reason the query is failing is that I haven't followed the procedures for setting up the ports etc described in one of the microsoft support articles: e.g.: 250367.
Configuring the ports involves too much company politics, and besides, for what this query does, it does not need the benefits of a distributed transaction.
How can I execute my query without SQL Server automatically trying to upgrade it to a distributed transaction?
More Info: I can execute the query as a straight INSERT/SELECT linked-server query and it does the INSERT on the local SQL Server just like I want it to, so I assume it is not trying to use distributed transactions; but it takes around 7 seconds to run even though the entire SELECT is executed on the linked server, whereas executing with sp_executesql takes only 1 second.
I thought selected "non-transacted updates" in the provider would solve this problem, but it did not.
Anyone know the answer?
I have table A and table B. i want if table A add records, automatically table b add records too.
thanks,
andi
I'm looking for a way to get the name of the server on which the DTS package lives.
I copy packages between servers. The problem is that everytime a package is copied
to different server, I have to change the reference in the connection strings to point
to the new server name. I'd like to find an automatic way to interrogate the server
name where the package currently lives and dynamically change connection strings
from within an ActiveX task. That would cut maintenance way down.
I installed SQL Sp2 and at the same time took Carbon Copy off. No when the machine comes up neither SQL Server or the Agent will not come up. If I go to Service manager I can start both just fine. Nothing in either log to show why. Anyplace or any thoughts
View 2 Replies View RelatedHi,
I have SQL server running on windows Adv Server 2000. Since last couple days whole computer restart every one hours. Only thing I remember doing was to shrink database db size is 200+GB.
How can I fix this problem.
Any help will be highly appreciated?
Thanks.
Samir
Hi all,
I am wondering if there is a way that the SQL server resets every few hours. I am using an application which is heavily utilising SQL server and the server crashes every now and then. I can reset it manually but I was wondering if there is a way that it detects the crash and reset itself automatically. Thanks a million in advance.
I have a laptop with vista and sql 2005. When i start my computer, after it boots up and is ready to go, I look in the task manager at the process tab. Some sort of SQL Server component is running and eating up about 50k's worth of memory. What is it and how do set either Vista or SQL Server to not start whatever this is unless I do it manually(oh yeah...how would I turn it on?)and what are the ramifications of not having it start up when i start my laptop?
I know it is a rather rambling question, but its the best I can describe it. Thanks in advance for your help!
I have installed sql server 2005 in cluster. after all the process is finished the memory usage is showing 2 gb where as in the activity monitor there is no process running. what should i do to clear the memory automatically.
If i stop and start the serverice it is cleared, nor do i want to run any command to clear the memory.
I been asked recently in the interview thatHow can I detect changes automatically in the SQL Server Database when anything is updated, deleted or inserted?if anyone can help me in this that will be really great.
I dont actually know whether I can ask this here but I wanted to know the answer for this and thought this might be right place to ask?
sorry if I am wrong?
Thanks in Advance
A section of this company's intranet site where I just started interning at has little company anniversary and birthday sections that look like (for the anniversary section.. in the birthday section, it looks the same, except it doesn't say how old the comployee is):
-Steve Cunningham 6/1 - 6 yrs
-Andrew Brown 6/3 - 11yrs
-Lisa Stone 6/4 - 3 yrs
How can I get it so instead of manually changing that text every month, it will look at a SQL database and automatically change that text every month? I'm guessing the pseudocode would be if the b-day or anniv. month matches the current month, display the first and last name, the date, and number of years (which would have to be calculated maybe?) Any help would be GREAT! Thanks!!
~Michael
We have two SQL 2012 servers, sever A and B.
We need to sync a database on A so that there is a copy of it on B.
We need to be able to query both databases so mirroring isn't an option.
Hi all,
I import MS Excel 2003 spread sheet in MS SQL Server 2000 through MS SQL Server 2000 Enterprise Manager (rightclick on the table to be filled with dataall taskimport data). My excel file have 2000 rows and 100 columns of data. All the data are imported in relevant attributes cells in good manner. But the rows are sorted automatically. I am trying to say that first row data is match with my excel file. But second row data have gone to 7th row and 7th row have gone to 5th row like that. I need the data sequence what I have in my excel file. What is the problem occurred? How can I solve this?
Can I export my MS Excel 2003 file to MS SQL Server database?
Please help me. I don't have more knowledge in MS SQL Server 2000.
If your answer has any query to run then please mention where should I run that query.
Thanks,
With Regards,
bala.
Hi!
How to install sql server 2005 automatically with sa password
I want to know that i am creating a setup in visual studio 2005, i have set up sql server as prerequsite, by default the sql server installation is silent, it does not ask anything, in MSDE we had the facility of setyp.ini file which automatically creates the database with the settings provided in the ini file. Is there any option like this in sql server 2005 express editon.
[Options]
INSTANCENAME="MSDE"
SECURITYMODE=SQL
SAPWD="admin"
now what can be done in sql server 2005 express edtion
I have developing sample application for automatically send failure mail to respective person. Also i have storing all the failure mail details to database for unavailability of mail server. Once if the mail server available that time we will send all the failure mail to respective person.
View 5 Replies View RelatedCan anyone direct me to a code that would automatically apply transaction logs to a DB in the standby server? We have a process that dumps the transaction log backup from the primary server into the backup server every hour on the hour, but I need to apply that transaction log as soon as it is in the standby server.
I am sure someone will ask, why not do transactional replication or log shipping? My answer to that is I have yet to learn how to setup replication between servers. I need to get our backup server up and running in the next few days.
Thanks in advance for your help.
Helen
This is the weirdest this I have ever seen in a long time. I have MS SQL Server running on a server and use Enterprise Manager a lot. Well, the damndest thing happens when I log onto the server from the console and run Enterprise Manager. If I go into Enterprise Manager, and go to a database and then select a table and right-click, and run the "Open Table" option; the entire Enterprise Manager application mysterously closes.
This only happens from the server console and through Remotely Anywhere...it does not happen when I log onto the server from Remote Desktop.
Has anyone ever seen this before? Does anyone know a fix for this?
I have a SSIS data flow task that downloads data from an Oracle source which has some real dates and some date values of 0001-01-01 which I am trying to convert to '1900-01-01' using a decode(Date1,'0001-01-01','1900-01-01',Date1). The problem I am having is that when I run the package in Business Intelligence Development Studio on my local machine the date value is stored correctly in the SQL table in a datetime field as 1/1/1900 12:00:00 AM, however when I run the package from the server the field gets saved as 1/1/2001 12:00:00 AM.
I have tried a bunch of ways to work around this issue and the only solution I have found that works it to download into a temp table and then load into the live table. Does anyone have any idea of what might be causing this issue when I run the package from the server?
I have a problem setting the default value of a column. I am trying to set it to
(CONVERT([float],getdate()+(2),0))
However, SQL Server automatically sets it to
(CONVERT([float],getdate()+(2),(0)))
While it functionally does not change anything, we have a tool which compares the database schema against a pre-existing schema and shows this as an error.I have tried setting the value directly and through scripts but it does not work either way.
All -
I have a SQL Server 2005 HTTP endpoint. I create a transaction scope in a client application and call two methods on that endpoint. Will the operations performed in the two methods, really, be in a transaction?
In other words, will SQL Server enlist in the ambient transaction even when I am accessing it through a HTTP endpoint?
Thanks.
Hello all,
We are deploying an application using SQL Server Express to a wide variety of desktop and laptop machines. We are currently trying to decide whether we should install the SQL Server instance service to start automatically at startup or not. In the latter case, our application would start and stop the service.
Starting automatically will make our app load more quickly, which is important to our users. However, our support team is concerned that leaving the service running will leave our databases vulnerable to becoming "suspect" if, for example, a laptop user's battery dies suddenly. Of course this will always be a problem if the app is running, but our support team believes that having the service running all the time will increase the chances of this happening. One reason for their concern is that an older version of the software used MSDE which was running all the time, and they saw a good number of suspect database issues.
What is the best practice for leaving the service running, especially when there are a lot of laptop users?
Thanks,
Ben
automatically replicates new databases to Availability Group partners - if you do a little prep work on your environment first.To make it work:
1) Create linked servers on all group members pointing to all other servers in the group, with names matching the hostnames they represent.
2) Ensure suitable credentials (or 'current context' impersonation) for linked servers. Also: Enable RPC and RPC OUT
3) Run the DDL code below.
4) Schedule hadr_replicate_queue on [master] to run as often as you want initial syncs to occur. Every 5-10 minutes is plenty for most purposes.
5) Connect to an availability group listener and call CREATE DATABASE :)
I use a slightly more extended version of this code at home to do things like permissions synchronization across replicas - I essentially allow applications to install direct to an availability group replica and then have all the relevant objects replicate to other nodes. I don't really like going through manually and doing things, even though there's an AddIn from SQLSkills for management studio - it still requires manual intervention.
The main use I have for this at home is that I'm using the Azure pack, and want to automatically ensure that my newly created 'SQL Server Cloud' databases are highly available, plus it means when I install a non-alwayson aware product it doesn't require any extra work afterwards to allow failover to another machine.
* AlwaysOn Self-Population Script
* By: Steve Gray / steve@mostlyharmful.net
* Usage: Free, but buy me a beer if you're ever in Brisbane.
**/
USE [master]
GO
IF EXISTS (SELECT * FROM sys.tables WHERE name='hadr_pending_replicate')
[code]....