Thought I would post here in case anybody can give some information.
Here is the background information:
I have 2 tables (stores and sales) from the Pubs database in Sql Server 2000 copied down to a SQL Server CE database. There is no foreign key/primary key relationship between the 2 tables in the CE database.
Here are the update queries that cause the error:
UPDATE st
SET st.zip = 66668
FROM stores st
INNER JOIN sales sa ON st.stor_id = sa.stor_id
AND st.stor_id = 6380
Update stores SET stores.zip = 55555
FROM sales, stores
WHERE stores.stor_id = 6380
AND stores.stor_id = sales.stor_id
Here is the error message that is generated when I run the query (Param 0 and Param 1 change according to what column and line the FROM clause is in):
Error: 0x80040e14 DB_E_ERRORSINCOMMAND
Native Error: (25501)
Description: There was an error parsing the query. [Token line number,Token line offset,,Token in error,,]
Interface defining error: IID_ICommand
Param. 0: 2
Param. 1: 1
Param. 2: 0
Param. 3: FROM
Param. 4:
Param. 5:
I ran the 2 queries in SQL Query Analyzer in SQL Server 2000 and they worked just fine. I also created 2 new tables (stores1 and sales1) in SQL Server 2000 using the Select Into clause. The new tables were created from the sales table and stores table in the Pubs database. The new tables had no foreign key/primary key relationship.
I ran the queries again in Query Analyzer against the new tables and the queries produced no errors.
I have set up Transactional Replication from 2005 to 2000. After running a few transactions I disabled the replication, pointed one of our IIS servers to the 2000 database to do a quick functional test and validate replication. We are getting "Cannot insert duplicate value in object XXXX with violation of PK constraint errors. I was able to figure out the cause. This was happening for tables with Identity columns which have been set NOT FOR REPLICATION. The IDENT_CURRENT values are different than the MAX value in the table. so doing a DBCC CHECKIDENT with RESEED seemed to have fixed the issue. Now I am running the DBCC command on ALL tables that have been used for Replication and have NFR set to true. Its taking a while as the tables are big.
Now I am wondering if anyone has faced similar issue? Is this a known issue? I have googled and have found nothing or no one complaining about this. I believe most people have used replication for reporting where they are just querying the databases. We are testing replication as a fall back scenario.
I tried to create a new project in BCM and I get an error indicating that there is already a project with that name. There is no project with that name in my list of projects! However, I think during one of the frequent installs and uninstalls before I was able to install a somewhat stable BCM, i might have created a project with that name prior to one of the many crashes (it still hangs and has to be killed in task manager periodically). I suspect I might have a rogue database that was created during one of the reinstalls which included installing and uninstalling small business accounting, which I have since also uninstalled. I have tried to use studio manager express to look at the tables in the databases, of which there are two, "mssmallbusiness" and "contctmgr 16022007" , in order to find an instance of a record with the name in question, no joy yet. Do I need the "mssmallbusiness" database to run BCM and if not can I delete it? I suspect that the mssmallbusiness database could be interfering somehow with the "contctmgr 16022007".
Since installing BCM, my outlook has slowed down considerably and hangs often on launch, I would abandon BCM, but I think it's a really cool tool and I would like to install small business accounting too! My machine is a centrino duo with 1 GB RAM and plenty HD space.
I know this message is somwhat convoluted, but if you can make sense of my issues, pls help.
I am running sql 2005, I recently changed my sql login account for security reasons. The site is connecting to the database fine but in my server logs, all the Search engine bots are causing sql login errors. Its like they are still cacheing the old account
I have a sql snippet from a 3rd party application that will not complete its transaction. The SELECT statement executes but does not finish. Instead the statement just sits in AWAITING COMMAND for 1000 seconds then dies, thus killing the UPDATE statement that is supposed to follow.
I just ran into an issue with cascading locks due to a SPID on one of my production servers. When researching the lock, I noticed that there was no sql text. SP_Who 2, nor the following query captured anything,
I spoke to the user causing the lock and he ran into a visual basic error when this occurred and didn't close out that window. So my guess is that it's due to an uncommitted transaction. However, shouldn't I still see something if that was the case?
Recently a production server suffered a critical blocking period and I wanted to know if I could solicit some input. It seems that a stored procedure was in the middle of recompiling while and auto update statistics started. This caused blocking for like an hour on the single object (stored procedure) that was originally called. The table that the update occurred on and that the stored procedure is reading form is quite large. It is 2 mil rows and about 140 columns wide. Some info from sysprocesses is below. The table alone takes up almost 4GB of space, when looking at sp_spaceused. I have some questions. 1. Can the update statistics for a '_WA%' stats cause blocking on a table? 2. Does an update stats on an index survive a restart of SQL server? We tried restarting, but the blocking did not end. 3. If the stored procedure is running under a compile, can the server automatically start an update stats and cause the stored procedure to wait? 4. Can the server automatically start an update stats on more than one column stats at a time, causing one to be blocked by the other? 5. We had never seen this issue before going to SQL2K clustering. Is this something specific to SQL2K and not SQL7 ?
Thanks for your input. John Lee
This is the lock info for the blocking processes.
spid dbid ObjId IndId Type Resource Mode Status name ------ ------ ----------- ------ ---- ---------------- -------- ------ ------------------------- 142 7 2 1 KEY (6f00035ef42b) S GRANT sysindexes 142 7 2 1 KEY (6f00035ef42b) S GRANT sysindexes 142 7 421576540 0 TAB Sch-S GRANT tJob 142 7 1141579105 0 TAB Sch-S GRANT tPatient_info 142 7 1141579105 0 TAB [UPD-STATS] Sch-M GRANT tPatient_info 142 7 1659921035 0 TAB [COMPILE] X GRANT iDBGetPatInfoRecord 142 7 1659921035 0 TAB Sch-S GRANT iDBGetPatInfoRecord
These are the processes that are being blocked:
spid ------ 137 140
Below this is a snapshot of all the SQL processes on the server being blocked. Save the report and send to the whole database group.
Hi, I'm taking an Excel spreadsheet (that could have around 30k rows) and processing it in SSIS. I essentially have a flag in one of the spreadsheet cols that indicates whether the record is already in the database or not.
I'm splitting the data using a conditional split on this column and using a OLE DB Destination (Fast Load) to perform the inserts and a OLE DB Command to fire a stored procedure to perform any updates. Both the OLE DB Destination and the stored procedure are hitting the same table and the two operations could be executing at the same time as they both appear directly after the Conditional Split, so the OLE DB Destination is set NOT to lock the table.
This seemed to work OK until recently. I've just added 2 triggers onto the table in question which I don't want to fire 30,000 times during the import. As the OLE DB Destination is set to use Fast Load, it doesn't fire the triggers - cool. In the update stored procedure it disables the trigger before performing it's update and re-enables the trigger when finished. Currently this does mean that if you only had updates, the trigger could be enables/disabled 30,000 times. That sounds kinda bad, but I don't really know if this carries a large overhead or not?
If, when importing now you have both updates and inserts the whole process locks up. From looking at activity monitor, it seems as though the INSERT gets suspended.
Do I have a fundamental problem with how I've structured the Data Flow or am I just being really stupid in Enabling/Disabling a trigger that many times, which is probably causing the problem?
Hi,I'm using sql server 2000 sp4.I've 2 databases linked, an instance and my local.I'm getting two different errors when trying to update the remote table(local server) from the instance.There is only one row of data in the table with an identity field.1st sql:-UPDATE [local].[database].dbo.NUMBERS SET [f 1]=3This gives me the error:-Server: Msg 8180, Level 16, State 1, Line 1Statement(s) could not be prepared.Server: Msg 170, Level 15, State 1, Line 1Line 1: Incorrect syntax near '1'.If I was to remove the space from [f 1] and use [f1] it would workfine."select [f 1] from [dev001].[fashion Master].dbo.numbers"will return the correct valueAny Ideas ?2nd sql:-UPDATE [local].[database].dbo.NUMBERS SET [field1]=isnull([field1],0)+1This gives me the error:-Server: Msg 7306, Level 16, State 2, Line 1Could not open table '"fashion Master"."dbo"."NUMBERS"' from OLE DBprovider 'SQLOLEDB'. The provider could not support a row lookupposition. The provider indicates that conflicts occurred with otherproperties or requirements.[OLE/DB provider returned message: Multiple-step OLE DB operationgenerated errors. Check each OLE DB status value, if available. No workwas done.]OLE DB error trace [OLE/DB Provider 'SQLOLEDB' IOpenRowset::OpenRowsetreturned 0x80040e21: [PROPID=DBPROP_BOOKMARKS VALUE=TrueSTATUS=DBPROPSTATUS_CONFLICTING], [PROPID=DBPROP_COMMANDTIMEOUTVALUE=600 STATUS=DBPROPSTATUS_OK], [PROPID=Unknown PropertyIDVALUE=True STATUS=DBPROPSTATUS_OK], [PROPID=DBPROP_IRowsetLocateVALUE=True STATUS=DBPROPSTATUS_CONFLICTING],[PROPID=DBPROP_IRowsetChange VA...If I was to remove the isnull part, then it will work okAny ideas
When I try to debug the break points will always say the source code is different from the current version, but the custom component in the GAC has the new version number. The other strange thing is the toolbox will not reset to the original version meaning it will not remove the custom components. The funny thing is after I compile the custom components and restart VS the custom component runs with the new code changes. I can see the new features I added, but the debugger and toolbox still seem to be broken.
I have tried the following 1) Reset the tool box. 2) uninstall all my custom dll from the GAC €œC:WINDOWSassembly€? 3) remove all my custom dll from €œC:Program FilesMicrosoft SQL Server90DTSPipelineComponents€? 4) restart VS 2005 5) reselect the custom components. 6) reboot my computer.
It seem like VS has another cache. For the tool box or something.
I got some help on here before with building my query. I thought this was working fine but it turns out when there are multiple records for a column type, it only grabs the first one. I need to get all records. Is there an alternative to MAX? I needed to structure it like this because I needed to return each row as a column and this was the way suggessted before. My query:SELECT TOP (100) PERCENT PRODUCT_NUMBER, PRODUCT_NAME, MAX(CASE WHEN ColumnName = 'Federal Specification Number' THEN TheValue ELSE NULL END) AS [Federal Specification Number]FROM (SELECT dbo.PRODUCT_FEATURE_VALUES.PRODUCT_ID AS ProductID, dbo.SHARED_FEATURE_VALUES.FEATURE_TEXT_VALUE AS TheValue, dbo.SHARED_FEATURE_TYPES.FEATURE_TYPE AS ColumnName, dbo.PRODUCTS.PRODUCT_NUMBER, dbo.PRODUCTS.PRODUCT_NAME FROM dbo.PRODUCT_FEATURE_VALUES INNER JOINdbo.SHARED_FEATURE_TYPES ON dbo.PRODUCT_FEATURE_VALUES.FEATURE_TYPE_ID = dbo.SHARED_FEATURE_TYPES.FEATURE_TYPE_ID INNER JOINdbo.SHARED_FEATURE_VALUES ON dbo.PRODUCT_FEATURE_VALUES.FEATURE_VALUE_ID = dbo.SHARED_FEATURE_VALUES.FEATURE_VALUE_ID INNER JOINdbo.PRODUCTS ON dbo.PRODUCT_FEATURE_VALUES.PRODUCT_ID = dbo.PRODUCTS.PRODUCT_ID UNIONSELECT dbo.EXTENDED_ATTRIBUTE_VALUES.PRODUCT_ID AS ProductID, ISNULL(dbo.EXTENDED_ATTRIBUTE_VALUES.SMALL_TEXT_VALUE, dbo.EXTENDED_ATTRIBUTE_VALUES.LARGE_TEXT_VALUE) AS TheValue, dbo.EXTENDED_ATTRIBUTES.COLUMN_NAME AS ColumnName, PRODUCTS_1.PRODUCT_NUMBER, PRODUCTS_1.PRODUCT_NAME FROM dbo.EXTENDED_ATTRIBUTE_VALUES INNER JOINdbo.EXTENDED_ATTRIBUTES ON dbo.EXTENDED_ATTRIBUTE_VALUES.EXT_ATT_ID = dbo.EXTENDED_ATTRIBUTES.EXT_ATT_ID INNER JOIN dbo.PRODUCTS AS PRODUCTS_1 ON dbo.EXTENDED_ATTRIBUTE_VALUES.PRODUCT_ID = PRODUCTS_1.PRODUCT_ID) AS t1 WHERE PRODUCT_NUMBER = '02083' GROUP BY PRODUCT_NUMBER, PRODUCT_NAME ORDER BY PRODUCT_NUMBER
This returns: Product_Number Product_Name Federal Specification Number 02083 Di-Electric Grease, 10.5 Wt Oz FDZ-CFR-21-178.3570 There is another record for Federal Specification Number I need to return as well. If I change to MIN, it gets the other record. Anyway I can get both?
Hi, I am a new learner and user to SQL Sever 2005 and am having some major frustration trying to write a simple query.
I have two tables, 1) Ticket_Purchase, 2) Flight.
The Ticket_Purchase table has these columns: Ticket_Purchase_Number(PK), Flight_Number(FK), Date_Purchase_Made, Ticket_Price, Class_of_Ticket, Passenger_ID
The Flight table has these columns: Flight_Number(PK), Flight_Date, Flight_Departure_Time, Flight_Arrival_Time, Flight_Origin, Flight_Destination
I am trying to create a query that will tell me: On which flight were the most first class tickets sold?
There are only two types of classes; 'E' for economy and 'F' for First Class.
So far I am able to get a list of all the First class flights for each flight and can visually see which flight has the most first class tickets by counting them manually on the report generated, but I am totally confused on how to simply pull the single flight with the most First class tickets sold. I wonder if this requires something more like a join or a nested sub query?
The SQL I wrote for the above is:
Select Class_of_Ticket, Flight_Number From Ticket_Purchase Where Class_of_Ticket = ('F') Order By Flight_Number;
And it produces:
Class_of_Ticket Flight_Number --------------- ------------- F 1 F 1 F 1 F 2 F 2 F 3 F 3 F 3 F 3 F 4 F 4 F 4 F 4 F 4 F 4 F 4 F 4 F 4 F 4 F 4 F 4 F 4 F 4 F 5 F 5 F 6 F 6 F 6 F 7 F 7 F 8 F 8 F 8 F 9 F 9 F 9 F 9 F 9
(38 row(s) affected)
Rather I would like it to produce: First_Class_Seats Purchased Flight_Number --------------------------- ------------ 14 4
I hope I didn't make this to confusing to understand as I am still learning the syntax and 'lingo' of how to communicate this stuff verbally.
Thank you for any help you could offer. It would be much appreciated.
Edit: the query report I pasted from SQL should have the flight number directly under the column header. For some reason the space between Class and Flight_number is being eliminated in the post.
Okay, so I came across an odd performance issue that I'm wondering if some guru can help me out with.
I have a query that uses a paging algorithm that uses a paging algorithm and a table variable, then gets a page of data based on a join to that table variable. Here's a simplified query using the algoritm:
--declare table variable... not shown for brevity
--make sure we only store the least amount of records possible SET ROWCOUNT ( @pageNumber + 1 ) * @pageSize
--insert into table variable INSERT INTO @TableVariable( Key ) SELECT key FROM table WHERE whatever = @p1
--we only want one page of data SET ROWCOUNT @pageSize
--now get the page of data from the table SELECT key FROM table WHERE whatever = @p1 AND [TableVar Identity Column] > @pageNumber * @pageSize
The algorithm works great for our needs, BUT, I noticed something a little odd about its behavior during performance testing.
In particular, when I run the query using Sql Server Management Studio, where I manually DECLARE all the variables it ends up needing only 156 reads to complete the job. When I call it from the app using ADO.NET, however, I noticed it needs 310 reads! Huh?
I looked for differences, and the only one I could determine was that ADO.NET passes the query and uses sp_executesql and passes the parameters vs. declaring and setting them statically before executing the query. I confirmed that this was the issue by manually running sp_execute SQL and seeing that it took roughly the same number of reads (274) to process the query.
Naturally, I don't want the time it takes to perfrom my query to double, but and frankly I don't understand why there would be a difference in performance. Can anyone help me track down what is going on and suggest to me how to fix the problem.
I assume that SQL Server Management Studio optimizes the execution path somehow, but I'm not sure how to gain the same benefit for my passed query. Can I enable something with hints? Is there something else going on that I should know about?
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
Is there a way I can stop a form from inserting or updating a record when there is an error. I have an sql 2000 DB. I have noticed that if the db field can handle 50 characters and the form field has no limit on the number of characters no errors are displayed to the user if they try to use more than the 50 characters in the textbox. The record is not saved. None of the fields are saved. I do notice the autonumber generated is skipped by the db. That is, the next autonumber for a successful insert skips the logical next number. How do I capture this error, or any save error and return the user back to the form? Yes, I have limited the number of characters a user can type on the textbox now, but I would really like to catch save or insert errors. I use asp.net 2.0 and VB. I don't know C#. thanksMilton
I installed Sql Server 2000 on a Windows 2003 machine and everythingappeared to be fine. It has Sql Server SP4 and Windows 2003 SP1 installed.The problem occurs whenever I use Enterprise Manager or Query Analyzer formore than a few minutes. After a while, all internet connectivity on theserver machine is broken. I cannot connect to it through Enterprise Manager,and on the machine itself, nothing related to the internet works at all.There are no errors in the Windows log or the Sql log. Disabling andenabling the Ethernet adapter fixes connectivity, until the next time I useEnterprise Manager for a while. What is going on?The machine is a Dell PowerEdge SC420 with a BroadCom NetXtreme Gigabitadapter and Windows 2003 Enterprise Edition.
Hi everybody, I have a mirroring set up for around 30 databases in a 64 bit - 2 powerfull servers scenario - wih latest sp2 + hotfix. Mirroring works perfectly most of the times but when the principal is getting busy during the busy period of the day all of a sudden the processor on the mirror jumps to 100% and stays there for a long time - there are no live databases on the mirror server - all the databases are in mirrored mode. The principal server processor is less than 5% all the time. The network load between the principal and the mirror is also in normal limits. The principal server is dedicated to SQL but the mirror has other things too but the other processes use up maximum 15-20% of the CPU and when I stop SQL Server in one of those moments when the CPU jumps to 100% everything comes back to normal so it's clear that the issue is SQL on the mirror. Any ideas would be greatly appreciated.
We have around 5 SP’s which are inserting data into Table A,and these will run in parallel.From the temp tables in the SP,data will be loaded to Table A. We are getting deadlock here.No Begin and End Transaction used in the stored procedure.
We are going insane trying to start Report Manager on a SQL Reporting Services 2000 installation. The programmer/admin who originally set this up for us is gone.
We recently upgraded a database/application server to a new server, causing the data source being used by reports in reporting services to no longer be valid. Unfortunately, we do not have access to the original report project to 're-deploy' with the corrected data source.
We desperately need to get the reports that are installed to retrieve their data from the new database location/machine. We understand this can be done by specifying a new data source in Report Manager. (To clarify, we have NOT moved the report servier installation or database, these remain in place - it's just the deployed reports that no longer point to the correct data source.)
For some reason, our Report Manager will no longer run - when we try to launch it, we get a windows login dialog - nothing will work here. We've tried both local and domain admins and constantly get ACCESS IS DENIED 401.3 error messages that we do not have permission/problems with ACL's.
We've gone so far as to allow EVERYONE read/write access to the ReportManager and ReportServer folders and the RS virtual directories, but nothing seems to help.
Can anyone help with this? Ideas on how to change our data source, or how to get back into Report Manager?
Since we are somewhat technical, but not experts, and don't have much more time to waste, we are willing to pay $500 for this project to someone willing to access the server and fix the problem so that the reports point to the correct database and restore access to Report Manager.
Hi all, I have the "Northwind" database in my Sql Server Management Studio Express.
In my C:ProSSEAppsSamplesForChapter02Chapter02 folder, I have the following 2 files: (1) ListColumnValues (MS-DOS Batch File) sqlcmd -S .sqlexpress -v DBName = "Northwind" CName = "CompanyName" TName = "Shippers" -i c:prosseappschapter02ListListColumnVales.sql -o c:prosseappschapter02ColumnValuesOut.rpt (2) ListColumnValues (Microsoft SQL Server Query File) USE $(Northwind) GO SELECT $(CompanyName) FROM $(Shippers) GO When I ran the following SQLcmd: C:ProSSEAppsSamplesForChapter02Chapter02>ListColumnValues.bat I got the following "ColumnValuesOut.rpt" with error messages:
'Northwind' scripting variable not defined. Msg 102, Level 15, State 1, Server L1P2P3SQLEXPRESS, Line 1 Incorrect syntax near '$'. 'CompanyName' scripting variable not defined. 'Shippers' scripting variable not defined. Msg 102, Level 15, State 1, Server L1P2P3SQLEXPRESS, Line 1 Incorrect syntax near 'CompanyName'.
I copied these T-SQL statements from a book and I do not know how to correct them. Please help and tell me how to correct these errors.
Over the weekend I decided to give it the ability to do a case sensitive character swap. Updating the code was pretty straight forward but when I was through, I noticed that I was getting Cardinality Estimate warnings that I wasn't getting before.
Anyway, here is some test data and two versions of the executed SQL (the base code is all dynamic and the two code versions are the result of toggling the @MatchCase parameter).
/* ======================================== CREATE TABLE ======================================== */ CREATE TABLE [dbo].[PersonInfoSmall]( [PersonID] [BIGINT] NOT NULL, [FirstName] [NVARCHAR](50) NOT NULL, [MiddleName] [NVARCHAR](50) NULL, [LastName] [NVARCHAR](50) NOT NULL,
We have a massive database with an almost massive amount of traffic to and from it.
I've been requested to implement a sliding window partitioning with 2 partitions an active and passive 1,I managed to test this on a very small testbed last month.
I currently moved 97k table on to the partition function leaving me another 26 k to go
I'm using the following stored procedure to implement the sliding window
CREATE PROCEDURE [dbo].[ManageFactSlidingWindow](@pFunction nvarchar(max),@pSchema nvarchar(max),@FG nvarchar(max),@moveDays int) /***************************************************************************** PROCEDURE NAME: [ManageFactSlidingWindow] AUTHOR: Arshad Ali CREATED: 02/24/2013 DESCRIPTION: This stored procedure manages sliding window for the partitioned table
VERSION HISTORY: DATE EMAIL Company DESCRIPTION
[Code] .....
When I try to move the partition even a single day I get loads of locks.
In VBA, I constructed the following to update all records intblmyTable with each records in tblmyTableTEMP having the sameUniqueID:UPDATEtblMyTable RIGHT JOIN tblMyTableTEMP ON tblMyTable.UniqueID =tblMyTableTEMP.UniqueIDSETtblMyTable.myField = tblMyTableTEMP.myField,tblMyTable.myField2 = tblMyTableTEMP.myField2,tblMyTable.myField3 = tblMyTableTEMP.myField3How is this done in a SQL Server Stored Procedure?Any help is appreciated.lq
I am new to both ASP.net and this forum. I have seen some posts close to this, but none address this problem.
I have a SQL Server database on JOHN1 called 'siu_log' with a table called 'siu_log'. It has two fields: Scenarios char[20] and Machines char[20].
I have been adapting code from Build Your Own ASP.NET Website in C# & VB.NET by Zac Ruvalcaba to learn the language. Much of what you will see is his work adapted for my use.
Sub dg_Update(ByVal s As Object, ByVal e As DataGridCommandEventArgs) Dim strMachineName, strScenarioName As String Dim intResult As Integer strScenarioName = Trim(scenariosDataGrid.DataKeys(e.Item.ItemIndex)) strMachineName = CType(e.Item.FindControl("txtMachine"), TextBox).Text cmd = New SqlCommand("UPDATE siu_log SET Machines=@Machine " & _ "WHERE Scenarios=@Scenario", conn) cmd.Parameters.Add("@Machine", strMachineName) cmd.Parameters.Add("@Scenario", strScenarioName) conn.Open() intResult = cmd.ExecuteNonQuery() resultLabel.Text = "The result was " & intResult & "." conn.Close() scenariosDataGrid.EditItemIndex = -1 BindData() End Sub
The problem is the strMachineName variable always contains the previous contents of the text box -- not the new one. This makes the UPDATE query just push the old data back into the table.
Hello all. I have 2 tables members1 and members2. members1 have a field called directory_services_idmembers2 also has a field directory_services_id and another one called employee_id I need to update directory_services_id in members1 to the value employee_id in members2 Where members1.directory_services_id = members2.directory_services_id I dont want to update all the records. Only those records in members1 that have a match on directory_services_id in members2. So if there are 100 records that match on directory_services_id then i want to update only those 100 and not all the records.This is the query that I have so far.Update members1 M1 Set directory_services_id = (Select member_custom20 From members2 M2 Where M1.directory_services_id = M2.directory_services_id)Where M1.directory_services_id IN (Select directory_services_id From M2)And the error I am getting isServer: Msg 170, Level 15, State 1, Line 1Line 1: Incorrect syntax near 'M1'.Server: Msg 156, Level 15, State 1, Line 3Incorrect syntax near the keyword 'Where'.Please help. Thank you.
I have two tables in an inner join. I'm detailing the tables with some of their fields below. These tables are in a database I'm creating to manage backup tapes. Most importantly, this database will inform me when backup tapes which have already been used can be recycled (e.g. after all the jobs on the tape are over 28 days old). I want to write something which will look at each tape in turn and, if all related backup jobs on that tape are aged, the tape status will be changed from Active to Spare.
Tapes --TapeNo --Status (Spare / Assigned)
Jobs --JobNo --Name --Description --TapeNo --AgedJob (BIT field indicating whether or not the job has aged)
Each tape can have 0, 1 or many jobs and each job can be on more than one tape.
Anyway, I have the tables and relationsips set up and they're ok. Again, what I'm struggling with is how I take each tape and look at all its jobs and, if all have aged, change the Status for the tape to Spare. I'm using SQL Server 2000 (Access 2003 as front end) and am pretty new to SQL. I was thinking this could be done by using some kind of update query and subquery, but I'm stumped. Could someone please help ?
Can someome please advise what the equivalent query would be inMicrosoft SQL Server ... I've tried a number of combinations with nosuccess ... Thanks, Ralph Noble (ralph_noble@hotmail.com)================UPDATE INVENTORYINNER JOIN SALES ON (INVENTORY.BAR_CODE = SALES.BAR_CODE)AND (INVENTORY.PRODUCT_NBR = SALES.PRODUCT_NBR)SET INVENTORY.DATE_PURCHASED = "20050127"WHERE (((SALES.SOLD)="20050127"));
Membertable1 has SSN, Address1, Address2 as columns. Membertable2 has SSN, Name, Address1, Address2 as columns. For each SSN in Membertable2 I want to update the Address1 and Address2 from Membertable1 table Address columns if it is available.
Since it is SQL Server 2005, thinking of any 2005 features. SQL Statements only. Thank you, Gish
Our monitoring tool shows that our production system periodically experiencing large rate - up to 800 memory pages/sec. How to find out which particular queries, S.P., processes that initiate this?
I am trying to Write an update string for individual partID's. I wrote this query below but it isn't populating the time to test.
SELECT 'UPDATE Parts SET = [TimeToTest]' + ' ' + Convert(varchar, (select test From [dbo].[db_PartsCats] as c Join Parts As P on P.category = C.CatID Where PartID = 48727)) + ' ' + 'WHERE PartID = ' + CONVERT(varchar, P.PartID) From Parts As P Where FRID = 0 And TimeToTest = 0 and TimeToInstall = 0 and TimeToProgram = 0 And TimeToTrain = 0 And manufacturer = 187 Order By categoryMy results:
Should get UPDATE Parts SET = [TimeToTest] 0.5000 WHERE PartID = 48871 But getting Nulls instead
