I'm looking for some online resources here. Specifically, I'm interested in finding some case/project examples to learn more. I'm looking for any and all kinds in all areas...ADO, Security, Maintenance, etc. I've worn out google, but the most I seem to find is articles. I'm looking for actual Cases, like one you'd find in a text.
I have a text book from a couple of courses I took in school. Unfortunately it doesn't delve much into said areas. Any resources you could point me I will greatly appreciate it. I'd even be interested in some actual books if there's any that any of you have experience with that you think would help me out. Thanks for reading.
How to write a Query for multiple legal names that have the same CARE Number (same address) with difference of one Legal Name having a period in the name versus the other legal name that doesn't.
For example: Looking for cases of two of the same legal name one set off by period
All Season Equipment Ltd. All Season Equipment Ltd
West End Housing, Inc. West End Housing, Inc
Wellings, Norman L. Wellings, Norman L
North Texas Boats, LLC North Texas Boats, L.L.C.
Oktibbeha County Cooperative (A.A.L.) Oktibbeha County Cooperative (AAL)
S & R Turf & Irrigation Equipment, L.L.C S & R Turf & Irrigation Equipment, L.L.C.
Burke Equipment Company; Burke Equipment-Seaford, Inc.; Newark Kubota, Inc. Burke Equipment Company Burke Equipment-Seaford, Inc.
Pleasant Valley Outdoor Power, L.L.C. Pleasant Valley Outdoor Power, LLC
J & D Lawn and Tractor Sales, Inc. J&D Lawn & Tractor Sales, Inc"
I am trying to build a query which will be used in an automated report to calculate failure rates of systems based on cases opened through support. Here is where I am stuck. Some systems may have multiple cases opened within the same span of another cases however we would consider this one failure:
System ACase12013-07-11 13:17:09.0002013-07-15 12:05:03.000 System ACase22013-07-12 16:27:50.0002013-07-12 16:29:12.000 System ACase32013-07-12 17:30:32.0002013-07-12 17:40:11.000 System ACase42013-07-12 19:00:24.0002013-07-12 19:04:14.000 System ACase52013-10-01 18:02:23.0002013-10-01 18:11:26.000
Lets say System A generated those 5 cases however Case 2,3 and 4 all happened within the same period as Case 1 so those 4 cases should count as one failure so my end result should be
System ACase12013-07-11 13:17:09.0002013-07-15 12:05:03.000 System ACase52013-10-01 18:02:23.0002013-10-01 18:11:26.000
And that system should show me 2 failures. I was thinking of using a temp table but not sure if that is possible as I am stumped on how to compare the dates to be able to validate if they fall within the range of an older case and whether or not to include them into the new Temp Table.
I recently added a nested table to a model that I had been using for a while. I noticed that after I added the nested table that the ClusterDistance() function returned 0 for every case. I went ahead and changed some of the keys for the nested table records so that the values would show up as missing and now the cases with a missing value have a non-zero ClusterDistance() value. Can anyone help me understand why this may be happening?
I have the following sproc that gets all the items from a queue with a few filters. I however need to return records where jobstepId is 1 and job jobqueuestatusid to be 4 if any jobqueuestatusid was 4 for that jobscheduleid, 2 if any is 2, and lastly 1. I tried inserting a case when exists(select * from flexportjobqueueview where jobscheduleID = [jobscheduleID] and jobqueuestatusid = '4' then 4, else ..... then 3, else ....... then 1, end
that did not seem to work. It inserted 4 or 3's for all and not just the particular scheduleid. Any help on this will be great thanks Ludwig
CREATE TABLE #QTEMP( [JobQueueID][int], [JobScheduleID][int], [JobID][int], [JobName][varchar](50), [JobDesc][varchar](50), [JobStepID][int], [JobStepName][varchar](50), [JobStepDesc][varchar](50), [JobStepExecutable][varchar](100), [JobQueueStatus_ID][int], [JobQueueStatusDesc][varchar](100), [NextRunDateTime][datetime], [LastRunDateTime][datetime], [ProcessID][int] )ON[PRIMARY] Declare @sql nvarchar(4000) Set @sql='INSERT INTO #QTEMP SELECT [JobQueueID], [JobScheduleID], [JobID], [JobName], [JobDesc], [JobStepID], [JobStepName], [JobStepDesc], [JobStepExecutable], [JobQueueStatus_ID], [JobQueueStatusDesc], [NextRunDateTime], [LastRunDateTime], [ProcessID] FROM [FlexPort].[dbo].[FlexPortJobQueueView] WHERE [JobID] IS NOT NULL
' IF ISNull(@JobScheduleID,'')<>'' Set @sql = @sql + ' And [JobScheduleID] like ''%' + @JobScheduleID + '%''' IF ISNull(@JobID,'')<>'' Set @sql = @sql + ' And [JobID] like ''%' + @JobID + '%''' IF ISNull(@JOBName,'')<>'' Set @sql = @sql + ' And [JobName] like ''%' + @JOBName + '%''' IF ISNull(@Status,'')<>'' Set @sql = @sql + ' And [JobQueueStatus_ID] like ''%' + @Status + '%''' If IsNull(@LastRunDateTime, '') <>'' Set @sql = @sql + ' And [LastRunDateTime] > ''' + Convert(varchar, @LastRunDateTime, 101) + ''''
Exec master.dbo.sp_ExecuteSql @sqlI have the following sproc that gets all the items from a queue with a few filters. I however need to return records where jobstepId is 1 and job jobqueuestatusid to be 4 if any jobqueuestatusid was 4 for that jobscheduleid, 2 if any is 2, and lastly 1. I tried inserting a case when exists(select * from flexportjobqueueview where jobscheduleID = [jobscheduleID] and jobqueuestatusid = '4' then 4, else ..... then 3, else ....... then 1, end
that did not seem to work. It inserted 4 or 3's for all and not just the particular scheduleid. Any help on this will be great thanks Ludwig
CREATE TABLE #QTEMP( [JobQueueID][int], [JobScheduleID][int], [JobID][int], [JobName][varchar](50), [JobDesc][varchar](50), [JobStepID][int], [JobStepName][varchar](50), [JobStepDesc][varchar](50), [JobStepExecutable][varchar](100), [JobQueueStatus_ID][int], [JobQueueStatusDesc][varchar](100), [NextRunDateTime][datetime], [LastRunDateTime][datetime], [ProcessID][int] )ON[PRIMARY] Declare @sql nvarchar(4000) Set @sql='INSERT INTO #QTEMP SELECT [JobQueueID], [JobScheduleID], [JobID], [JobName], [JobDesc], [JobStepID], [JobStepName], [JobStepDesc], [JobStepExecutable], [JobQueueStatus_ID], [JobQueueStatusDesc], [NextRunDateTime], [LastRunDateTime], [ProcessID] FROM [FlexPort].[dbo].[FlexPortJobQueueView] WHERE [JobID] IS NOT NULL
' IF ISNull(@JobScheduleID,'')<>'' Set @sql = @sql + ' And [JobScheduleID] like ''%' + @JobScheduleID + '%''' IF ISNull(@JobID,'')<>'' Set @sql = @sql + ' And [JobID] like ''%' + @JobID + '%''' IF ISNull(@JOBName,'')<>'' Set @sql = @sql + ' And [JobName] like ''%' + @JOBName + '%''' IF ISNull(@Status,'')<>'' Set @sql = @sql + ' And [JobQueueStatus_ID] like ''%' + @Status + '%''' If IsNull(@LastRunDateTime, '') <>'' Set @sql = @sql + ' And [LastRunDateTime] > ''' + Convert(varchar, @LastRunDateTime, 101) + ''''
I need to add some cases to the select statment for cpeorderstatus: Here is my Select statement: "SELECT O.ORDERID, C.FIRSTNAME, C.LASTNAME, O.CLIENTORDERID AS CRMORDERID, TO_CHAR(O.ORDERDATE, 'YYYYMMDD') AS CPEORDERDATE, TO_CHAR(O.SHIPDATE, 'YYYYMMDD') AS SHIPDATE, O.TRACKINGNBR AS TRACKINGNUMBER, O.SHIPNAME AS CARRIER, OI.ITEM AS CPEORDERTYPE, OI.QTY, O.STATUS AS CPEORDERSTATUS, OSN.ORD_SERIAL_NO AS SERIALNUMBER, C.BTN AS BTN, C.FIRSTNAME AS FIRST, C.LASTNAME AS LAST, C.SHIPADDR1 AS ADDRESSLINE1, C.SHIPADDR2 AS ADDRESSLINE2, C.CITY AS CITY, C.STATE AS STATE, C.ZIP AS ZIP, TO_CHAR(R.ISSUEDATE, 'YYYYMMDD') AS ISSUEDATE, R.RMA_ID AS RMANUMBER, R.RMA_REASON AS REASON, TO_CHAR(R.RETURNDATE, 'YYYYMMDD') AS RETURNDATE FROM SELF.ORDERS O, SELF.CUSTOMER C, SELF.ORDERITEM OI, SELF.ORD_SERIAL_NUMBER OSN, SELF.RMA R WHERE O.CUSTID = C.CUSTID AND O.ORDERID = OI.ORDERID AND O.ORDERID = OSN.ORDER_ID (+) AND O.ORDERID = R.ORDER_ID (+) AND (C.CUSTID IN (SELECT C.CUSTID FROM SELF.CUSTOMER C WHERE C.BTN='{0}')) ORDER BY O.ORDERDATE DESC" I need to add multiple cases to cpeorderstatus, five different cases. Cane anyonye HELP
I need to add some cases to the select statment for cpeorderstatus:
Here is my Select statement:
"SELECT O.ORDERID, C.FIRSTNAME, C.LASTNAME, O.CLIENTORDERID AS CRMORDERID, TO_CHAR(O.ORDERDATE, 'YYYYMMDD') AS CPEORDERDATE, TO_CHAR(O.SHIPDATE, 'YYYYMMDD') AS SHIPDATE, O.TRACKINGNBR AS TRACKINGNUMBER, O.SHIPNAME AS CARRIER, OI.ITEM AS CPEORDERTYPE, OI.QTY, O.STATUS AS CPEORDERSTATUS, OSN.ORD_SERIAL_NO AS SERIALNUMBER, C.BTN AS BTN, C.FIRSTNAME AS FIRST, C.LASTNAME AS LAST, C.SHIPADDR1 AS ADDRESSLINE1, C.SHIPADDR2 AS ADDRESSLINE2, C.CITY AS CITY, C.STATE AS STATE, C.ZIP AS ZIP, TO_CHAR(R.ISSUEDATE, 'YYYYMMDD') AS ISSUEDATE, R.RMA_ID AS RMANUMBER, R.RMA_REASON AS REASON, TO_CHAR(R.RETURNDATE, 'YYYYMMDD') AS RETURNDATE FROM SELF.ORDERS O, SELF.CUSTOMER C, SELF.ORDERITEM OI, SELF.ORD_SERIAL_NUMBER OSN, SELF.RMA R WHERE O.CUSTID = C.CUSTID AND O.ORDERID = OI.ORDERID AND O.ORDERID = OSN.ORDER_ID (+) AND O.ORDERID = R.ORDER_ID (+) AND (C.CUSTID IN (SELECT C.CUSTID FROM SELF.CUSTOMER C WHERE C.BTN='{0}')) ORDER BY O.ORDERDATE DESC"
I need to add multiple cases to cpeorderstatus, five different cases. Cane anyonye HELP
I have a table with a field that contains an integer which represents the state of a record. This field "intType" may contain values 0-4.
A parameter in my stored procedure "@intUserType" may contain values 0-3
If @intUserType = 0, I need to select the records where intType = 0 or 3 but if @intUserType = 3, I need to return all records where intType > 1, all other values of @intUserType should return no records
The query I am working with seems a bit forced and I feel like it could be simplified, but I can't seem to wrap my head around it.
This is what I am working with:
Code: SELECT * FROM tblEmployees WHERE (intType = (CASE WHEN @intUserType = 0 THEN 0 ELSE NULL END) OR intType = (CASE WHEN @intUserType = 0 THEN 3 ELSE NULL END) OR intType > (CASE WHEN @intUserType = 3 THEN 1 ELSE NULL END))
Maybe it is as good as it needs to be ... I don't know .. I've only been using SQL regulary for a couple of months and I have not had the time to really study it in depth.
do you know if I can do the following task through a single query
TableA(LocID,LocNAME) TableB(ID,LocID,Amount)
What i need to do is to add sum amount having same locID from TableB and get LocIDs name through TableA.LocName. In the query there should be one thing more, if amount is less than zero put it into credit column, while if positive, puts in debit column
Thus Result(LocId, LocName, Debit, Credit) is the requied structure. Can anyone help me out. I m not getting how to get the LocName if gets the sum by Groupby LocID also applying condition is confusing me:s
I need to delete all rows that match at least one of the account_id values of another row *and* that has the same email address. However, if they have the same email address and none of the account_id values then I need to keep it. I've attached a sample dataset along with the expected results.
I have this: DELETE [acctID_emailAddress_tmp] FROM [acctID_emailAddress_tmp] JOIN (select emailaddress, account_id, max(contact_id_tmp) max_cid from [acctID_emailAddress_tmp] group by emailaddress, account_id) AS tempImportTable ON tempImportTable.[emailaddress] = [acctID_emailAddress_tmp].[emailaddress] WHERE [acctID_emailAddress_tmp].[contact_id_tmp] < tempImportTable.[max_cid] AND tempImportTable.[account_id] = [acctID_emailAddress_tmp].[account_id];
but it doesn't work since it's keeping the subset of the dupe row(s).
Finding the court cases where all children associated with that case have a programClosureDate. I can run this query:
CaseInfo Table CaseID, CaseNumber, CaseName
CaseChild Table CaseID, FK to CaseInfo ChildPartyID, FK to PartyID in Party table ProgramClosureDate
Party Table ID, PartyID, Firstname, LastName
SELECT ci.CaseNumber, ci.CaseName, p.firstname+' '+p.lastname AS child, cc.programClosureDate FROM CaseInfo ci JOIN CaseChild cc ON ci.CaseID = cc.CaseID JOIN Party p ON cc.ChildPartyID = p.PartyID
WHERE cc.ProgramClosureDate IS NOT NULL ORDER BY ci.CaseName
But this does not give me the cases where all the children have programCLosureDate IS NOT NULL.
I haven't been able to find a DMX query which will spit out the cases which support a particular association rule. I was hoping it would work sort of like drillthrough but show only the cases supporting a particular rule. Am I missing something?
What I ended up doing was extracting the itemsets of the rule from the model's content then running a SQL query to retrieve the cases that contain both the left-hand and right-hand itemset of the rule. I'm hoping there's a better way.
________________________________________________ When i use above querey and want to select any one of Attribute then it works right for @ITEM = 1 or 2 but for Item 3 it not shows the 'Factor' and show DateValues on option 3 which is wrong. Also when i Change selection and select Code instead of Startdate then it works for all three Options. so i guess that Startdate create a problem, but i dont know why it creating problem and how to resolve it Plz give me some sugessions and solutions to resolve it.
I am testing a set of SSIS packages, In order to test my SSIS packages for errors I have two negative test cases
1) I didn't provide checkpoint file for the checkpoint enabled package.
2) I provide a wrong configuration file
Even though I am using a script task in my "on error" event of my SSIS package. It is not executed. (Perhaps because the package doesn't even execute).
My problem is that SSIS itself puts just a simple one liner in windows event log "Package Failure Error". It does not provide which package failed, why it failed etc. Therefore the admin who gets the ticket to resolve the issue has no clue of what is going wrong and where!
Since my custom logger doesn't even run, I don't know how can I put more details into the windows event log.
Configuration: MS SQL server 2005 SP2, and MS jdbc driver version: 1.1 The sendStringParameterAsUnicode has been set to false for performance reasons. However, when inserting unicode data, we would like to override the setting and send the data encoded in unicode, instead of defaulting the whole app to unicode=true and take a performance hit.
Any suggestions? We have tried the cast(? as nvarchar) function, but that did not help.
Sample code/output: String text = "u0143u0144"; sendStringParametersAsUnicode=false insert into unitable (_ntext) values (?) Inserting into databse: 143 144 (printed hex values) Read from database: 3f 3f (printed hex values)
I have created a custom CLR user define aggregate function based on the example that i found at http://msdn2.microsoft.com/en-us/library/ms131056(SQL.90).aspx.
It works great until i discovered that it will failed if i try to do either one of the following:
query a large records e.g: more than 4k records has IS NULL in my where clause e.g: WHERE myConcatenatedFld IS NULL
Other than these two, it works perfectly fine.
Here is the error that i got:
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
I have attached the Concatenate class that i used in my UDAGG.
I need to create a query that will count new cases based on the create date(create_date) and criteria for the groups(The only way to distinguish between the 2 major groups mts and bnb is area!= 'bnb" because everything else is MTS). The sample report I need to create below shows how it needs to be counted weekly, for a 4 month period, for the groups under MTS and BNB. The totals and grand totals can be achieved in the report tool. I want to create variables for the new cases (mts_newcases_sales, mts_newcases_salesd, bnb_newcases_salesd etc)
Ex. MTS sales : (status = 'Calculated' OR status = 'REJECTED') and errorsource != 'marketing' and accountns is null and area != 'BNB'(everything else is MTS)
MTS salesd ; Credit >= '1001' and (status = 'REJECTEDV' or status = 'ACCEPTEDS') and errorsource != 'marketing' and accountnr is null
BNB creditr: Credit < 101 and (status = 'SUBMITTED' OR status = 'REJECTEDS' OR status = 'REJECTEDA' OR STATUS = 'ACCEPTEDC')
Actor train nested table: ID MovieID Gender 1 1 F 2 1 M 3 1 F 4 1 F 5 2 M 6 2 M 7 2 F 8 3 F 9 3 F 10 4 M 11 4 M 12 4 F 13 4 F 14 5 F 15 5 M
We want to build a classifier model in order to predict the Class of a Movie based on the Gender of movie's actors. To deal with the nested table Analysis Services maps each record of the nested table to an attribute of the case table. These attributes are named Actor(n).Gender with n = 1..15, and so they are dependent on the nested table record numbers. Both Microsoft Decision Trees and Microsoft Naive Bayes algorihms use these attributes without any modification.
We are implementing a Relational Naive Bayes algorithm and we are planning to aggregate such attributes in order to make them independent of the nested table record numbers.
Next step we tried to predict some unseen cases and here we face with a very huge problem.
Lets take more two tables of unseen cases:
Movie test table: ID Class 6 + 7 NULL 8 NULL
Actor test nested table: ID MovieID Gender 1 6 F 2 6 M 3 6 F 4 6 F 16 7 F 17 7 M 18 7 F 19 7 F 20 7 F 21 8 M 22 8 M 23 8 F
Predicting the movie 6 Class is not a problem since the movie actors were included in the training dataset and when the records are mapped to attributes because they already exist in the model. But when you try to predict movies (7 an 8) with unseen actors all new attributes are simply ignored in the ALGORITHM:redict call (in_ulCaseValues is zero!) because they do not exist in the model!
My server is a dual AMD x64 2.19 GHz with 8 GB RAM running under Windows Server 2003 Enterprise Edition with service pack 1 installed. We have SQL 2000 32-bit Enterprise installed in the default instance. AWE is enabled using Dynamically configured SQL Server memory with 6215 MB minimum memory and 6656 maximum memory settings.
I have now installed, side-by-side, SQL Server 2005 Enterprise Edition in a separate named instance. Everything is running fine but I believe SQL Server2005 could run faster and need to ensure I am giving it plenty of resources. I realize AWE is not needed with SQL Server 2005 and I have seen suggestions to grant the SQL Server account the 'lock pages in memory' rights. This box only runs the SQL 2000 and SQL 2005 server databases and I would like to ensure, if possible, that each is splitting the available memory equally, at least until we can retire SQL Server 2000 next year. Any suggestions?
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
When I proposed start to use SQL Server 2005 for new VS 2005 web sites, one of my co-workers responded that we will update the old SQL Server 2000 databases to SQL Server 2005 when we are ready to use 2005 SQL Server.
Questions: 1. Any expected problems to upgrade old 2000 databases to new 2005 SQL Server? 2. I have installed both 2005/Management Studio Express and 2000/Enterprise Manager in my PC. Any expected problems when running both 2000 and 2005 SQL Server at the same database server? 3. What is the best configuration for running SQL Server 2005 when we have old 2000 databases? Upgade or not upgrade?
I am getteing need help Query analyzer error Unable to connect server local Msg17, level 16,state 1 ODBC SQL server driver [DBNETLIB]SQL server does not exist
Hi, I am having a problem connecting my .net applications from the application server to the database server. When I run the application from my windows xp (sp2) box it works fine. When I try to connect via SQL Management Studio to the database server from the application server I get the same error. Here is the error: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) Here is the Environment: App Server: Windows Server 2003 Standard Edition Inside Company's Firewall/ Network Database Server: Windows Server 2000 Advanced Edition SQL Server 2000 SP4 Remote Connections to the Server is checked Enable Protocols: Named Pipes & TCP/IP TCP/IP Port: 1402 (I don't know why it isn't the default of 1433) The db server is sitting out side the Company's firewall (don't ask me why). I can access it fine from inside the firewall on my XP box but not from windows server 2003. There is a web server outside the our network that also connects to the db server with no problem and that is running Windows Server 2003 Web Edition. I can ping the db server from the app server using the IP address. I tried using the IP address and the port 1402 in my connection string but that didn't work from any machine (XP and Server). I imagine the issue is somehow related to the company's firewall but why would it only block Windows Server 2003 and not XP? What do I tell the network admin to change? Any help would be appreciated. Thanks, Oran
if you can restore a database to Server B using Server A as the service. Meaning we would issue the command on Server A but somehow point to Server B as where we want the restore to happen.
The backup file would be in a location independent of both servers.
