I'm trying to install SQL Server 2000 client tools on an XP workstation.
MSDE already exists on the workstation. During the install I am never
prompted for a location to install to. I want to install to my D drive. The
install defaults to my C drive.
Any thoughts?
Hello,
I have installed successfully Microsoft SQL server 2005 in MSCS.
However the set up did not install Workstation components (client tools - SSMS etc).
I have successfully installed workstation components in one node of cluster.
However setup is giving following error while installing workstation components on other node. (From this node MS SQL server 2005 was installed).
Product: Microsoft SQL Server 2005 Tools -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SqlWbSetup.5F46584E_060D_4BCB_ADEE_BD15A7BFCC2A, location: C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe, command: /setup
There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
I did "C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe, /setup".
It executed but no error, no output.
Any gues, help in isolating issue?
Any more information required.(Media is ok. Setup has been tried after reboot. There is enough disk space.)
Regards.
Mahesh
===========
Setup
1) Microsoft Cluster of two nodes.
2) Hardare - HP Blade servers
3) OS - Windows 2003 EE with SP2
4) SQL Server 2005 Standard Edition with SP2.
=============================
MSI (s) (B0:7C) [17:40:20:390]: Note: 1: 1722 2: SqlWbSetup.5F46584E_060D_4BCB_ADEE_BD15A7BFCC2A 3: C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe 4: /setup
MSI (s) (B0:7C) [17:47:23:609]: Product: Microsoft SQL Server 2005 Tools -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SqlWbSetup.5F46584E_060D_4BCB_ADEE_BD15A7BFCC2A, location: C:Program FilesMicrosoft SQL Server90ToolsBinnVSShellCommon7IDESqlWb.exe, command: /setup
MSI (s) (B0:7C) [17:47:35:921]: Note: 1: 1729
MSI (s) (B0:7C) [17:47:35:921]: Product: Microsoft SQL Server 2005 Tools -- Configuration failed.
MSI (s) (B0:7C) [17:47:35:953]: Cleaning up uninstalled install packages, if any exist
MSI (s) (B0:7C) [17:47:35:953]: MainEngineThread is returning 1603
MSI (s) (B0:A0) [17:47:36:062]: Destroying RemoteAPI object.
MSI (s) (B0:80) [17:47:36:062]: Custom Action Manager thread ending.
Hi,I'm looking for stand alone installation for SQL server Client tools,or the files required for creating such an installation. I would liketo include this installation as part of the setup for my ownSQL-dependant app. Any assistance would be greatly appreciated.
View 3 Replies View RelatedDear All,
how can we know that wether we had server tools or client tools on my machine?
Arnav
Even you learn 1%, Learn it with 100% confidence.
HiHow network administartor can find , who has AQL server client tools onhis system?Thanks
View 2 Replies View RelatedIn Server Explorer of VS .NET 2003, I tried to generate SQL script of the dbo.Portal (ibs)
but got
"To use this feature, you must install the client tols for SQL Server"
When I searched for Help, I've got
"1.Insert the MS SQL Server 2000 compact disc in your CD-ROM drive"
I installed and use MSDE and cannot recall the use of any CD for installation.
1)
Does it mean that I cannot install client tools from MSDE installation?
If not...
2)
I have installation of MS SQL Server200 Enterprise that cannot be installed on Windows Xp Professional that I use. Can I still install "client tools" from Enterprise Ed. for MSDE
What is the quickest and easiest way to use client tools for 2005 like 2000....
?
According to MS Knowledge Base Article 269824, "[SQL Server 2000 ClientTools] ... must be installed ... on any computer on which someone may makedesign changes in an Access project to a SQL Server 2000 database".This is the situation I'm facing. Can I download these Client Tools andinstall them for free, or are they only available on the SQL Server 2000Installation CD?Thanks for any help!
View 1 Replies View RelatedHello,Is it necessary to upgrade the Client Connectivity Tools on all clientmachines after the SQL Server database server is upgraded from Version7.0 to 2000?Thank you in advance!Eddy
View 1 Replies View RelatedI have to go back east.. I am going to be working remotely.
We still used SQL Server 2000 at work..
Will I be able to use SQL Server 2005 Express edition to remotely connect to and modify stored procs and tables?
what are all my options??
Anybody please help me !
i was tried to install SQL Server 2k Client tools connectivity to my win 95, i was follow the installation procedure, 1). install common library updates for win 95, and then 2). install the server component (client connectivity tools), the installation is running well till copying "Microsoft Data Access Components - MDAC", i got error message : "Installation of the MDAC package failed (-1)". (so the installation doesn't complete).
please anybody help me, what's happen to my computer ?????????
:confused:
thanks for the help.
Andre.
The 6:th of march Sql server data tools for Visual Studio 2012 was released.
[URL]
I seem to be unable to install this using the link provided on the blog page. I'm getting a "Same architecture installation" error. Running on the machine is Visual Studio 2012 Premium & Sql Server 2012 (64bit).
why I'm getting this installation error.
Hi,
I just installed SQL Server for the first time on a windows 2003 OS which is on its on server. Then, I installed the client tools on my local computer. Now how do I connect to the sql server with my client tools? What I wanted to do is from my local computer use the enterprise manager and pull up the databases that are located on the server that contains the sql server.
Thanks a bunch,
Laura ;)
Hello
I am trying to install client tools on my desktop and I am getting the following error :
Edition Change Check (Warning)
Messages
Edition Change Check
To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005,
you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter.
This error , I am have seen in the logs.
The installation wizard is closing down with the above log error.
Thanks
Hello
I am trying to install sql server 2005 client tools and I get the following error:
Error code 2356 : Could not locate cabinet in stream : sql.cab
How can I go about this
Thanks
Someone please help me before I loose all of my hair :mad: !!!
I have two machines, a Windows Server 2003 machine running an SQL Server Standard Edition database instance and client tools (Enterprize Manager etc.), and a workstation PC running Windows XP SP2 which has just the SQL Server client tools (not an actual DB instance).
I'm trying to use the Enterprize Manager client tool on my WinXP machine to remotely connect to the server instance on the server PC (via 'New SQL Server Registration' option). Everytime I do this I get the following error message:
Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server Connection.
Now I've tried using different usernames and passwords. I have login details for my SQL Server set to use Windows Login rather then SQL Server login, so I tried remotely connecting with the username and password for the server PC, tried 'sa' with server password, even tried setting up a new user on the server and logging in from the client with that, no luck. I've opened up correct ports 1433 on both PCs, even disabled the windows firewalls algother. Both server and client have SP3a installed, WinServer2003 has SP1 and XP SP2.
So I'm at a loss to how to remotely connect to my SQL Server. FYI I know the server itself is working fine because I can connect to it using Enterprize Manager/Query Analyser on the local machine. Any ideas? Many thanks for your help!
Hi,
I'm trying to re-install SQL Server 2000 Desktop Engine andSQL Server client tools. I have succesfully re-installed the desktop engine,but I am getting the following error message when attempting to re-install theclient tools.
"Setup has detected an existing client tools only installation.
Please use the maintenance mode to add client components"
Unfortunately the Upgrade/Add/Remove option is greyed out as
an install option.
I attempted the registry hive rebuild option and the install appeared
to succeed. However, I cannot access any tools (Enterprise Manager
comes up with the message "The selected file cannot be found").
At this point, the desktop engine appears in Add/Remove programs
Window, but no other SQL Server components.
Any help very much appreciated!
Eric Yeoman.
Hello,
I have installed SQL server 2005 enterprise edition on Windows 2003 virtual PC (full installation). The installation went through successfully. However, after install completed, I cannot find any of the client tools under the start menu -> all programs -> Microsoft SQL server 2005 menu. The only item listed under the SQL server 2005 is Configuration Tools, which is used to configure the database server.
I have tried to install the client component again (in case I didn't install them at the first place) but the installation process cannot be started since it detected that the client components have been installed already. I can also see the sql server native client running in the services.
The server engine is working fine since I can connect to that sql server using another machine where I have the client tool (SQL server management studio).
One of my friends has exactly the same problem. He installed the sql server 2005 Standard edition on windows 2003 server (full installation), but the client tools are not showing up in the start menu either.
I also checked the location for the SQL server management studio (Microsoft SQL server/90/Tools/Binn/VSShell/Common7/IDE), there is only one folder called publicAssemblies listed under. Is this correct or something is missing?
Thanks
Hi!
Is there a separate set of files in the installation CD of MS SQL Server 7 which can be used to install a SQL Server Client installation?
Thanks in advance!
Bye!
Hi,
A quick Q for all the Sql Server 2000 beta testers out there. Does anyone know of any problems associated with using SS2000 Enterprise Manager with a SS7 backend running SP2? In particular, I'm keen to try out the Tsql debugger features, if they'll work with SS7.
Many thanks in advance,
Jon Reade,
Sql Server 7 DBA
NEC Technologies (UK) Ltd
Telford, Shropshire.
Hi,
I am using SQL Express 2005 server and sql compact edition for my PDA. For synchronization, which SQL Server 2005 Compact Edition Server Tools installation package do I use?
Is it Sqlce30setupen.msi or sql2kensp4.msi or sql2kensp3a.msi? I know for sql server 2005 its Sqlce30setupen.msi. Is it the same for the SQL Express 2005?
Thanks
I downloaded and performed a full install of SQL Server Express 2008 Nov CTP. It was installed on a fresh installation of Windows Vista Enterprise x64.
During setup, I checked the 'Client Tools' box which has the description:
"Includes management and development tools: SQL Server Management Studio, SQL Server Configuration Manager, SQL Server Profiler, and Database Engine Tuning Advisor"
The installation ran fine with no errors. After install I looked for the Management Studio but couldnt find it anywhere. No SQL Server Profiler or Database Tuning Advisor either. The only tool that appears to have installed is the SQL Server Configuration Manager.
If I check my Start Menu, the only 2008 items that exist are
Microsoft SQL Server 2008 >
Configuration Tools >
SQL Server Configuration Manager
SQL Server Error and Usage Reporting
SQL Server Installation Center
I checked the summary log and everythign PASSED:
Package results:
Passed
Execution statistics:
Exit code: 0x00000000
Exit message: Passed
Package start time: 12/13/2007 14:05:39
Package end time: 12/13/2007 14:09:06
Package install location: c:Program Files (x86)Microsoft SQL Server100Setup Bootstrap
Package initial action: Install
Media source location: Install
Media version: 10.0.1075.23
Machine properties:
Machine name: xxx
Machine processor count: 2
OS version: Windows Vista
OS service pack:
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
Properties provided in package.xml file:
LegalProductName: SQL Server Database Services 2008
Description: SQL Server Database Services 2008
Details: Install for SQL Server Database Services 2008
ProductName: SQL2008
Version: 10
SPLevel: 0
KBArticle: KB876234
KBArticleHyperlink: http://support.microsoft.com/?kbid=876234
Command line arguments provided:
ACTION: Install
INSTANCEIDSUFFIX:
Product features discovered:
Product: SQL2005
Product: SQL2008
Feature status after execution:
Database Engine Services: Passed
Replication: Passed
Client Tools: Passed
Windows Installer logs generated during execution:
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_Snac_Cpu64_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_Msxml6_Cpu64_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_Tools_Cpu32_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_SqlWriter_Cpu64_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_SqlBrowser_Cpu32_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_Sql_Cpu32_1.log
What is the issue here?
Hi,
I've got a big problem reinstalling the just released VS2005 Tools:
I've installed them, but then I've deinstalled them to first deinstall RC1 and install the just released RTM/W(?) of the runtime.
But since then I was not able to reinstall the VS2005 Tools: The installer just says, that a required program for the upgradepatch is missing or another version is installed.
I've also tried to reinstall SP1 of VS 2005, with the same result.
BTW, I just wanna mention, that it is very complex to look through the new released Compact Edition releases. For example for the runtime it is required that the english release is installed before another localized release. But the localized releases are not called "Language Packs" (what they are) and do not verify that the english version is already installed. Also I'm interested what the recommended installation order is for installing on a developer computer eg. in German. First the VS2005 Tools or the SDK or the runtime?
Thanks in advance,
Klaus
Hi ,
Iam a new bee to sql server.I have Installed sql server 2005 ( trail software ) in my Server.I like to install sql server 2005 clinet in another system. Where can i download sql server 2005 client??
My requirement is , i should access sql server database from my client...
Regs,
Priya
hello,
i have a windows 2003 server up and running and a client workstation connected via a crossoever cable. they both can ping each other.
my next step, i would like to replicate a "real world" scenario where i have the database engine and the sample databases on the server and i would like to be able to write to and from the cleint to main database which is going to be on the server.
so my question is, do i need a full install on both machines?
I need to be able to administer SQL 6.5 and 7.0 servers from a single pc.
I have been told that I can't have SQL 6.5 and 7.0 tools installed on the same pc.
Is this correct? I can't find anything in BOL or Technet on the subject.
Regards,
Kevin Napier
What if any are the implications of using the SQL 2K Client tools to access and administer SQL 7 dbs???
View 2 Replies View RelatedSQL 2000 Client tools SQL7 SP3 Server back-end.
I have a DTS Package created with SQL2000 client tools, which contains a SQL connection and a sql task (exec sp_who2). When I run the package on my PC it works, when I run the package via SQL Agent it comes back with :-
DTSRun: Loading... Error: -2147287038 (80030002); Provider Error: 0 (0) Error string: The system cannot find the file specified. Error source: Microsoft Data Transformation Services (DTS) Package Help file: sqldts.hlp Help context: 713. Process Exit Code 1. The step failed.
I am not using any files. The DTS Package is called PMC_Test
Here is the dtsrun syntax from the SQL Agent job.
DTSRun /S "APP003" /N "PMC_Test" /E
When I try and open the DTS package using SQL7 client tools I get the same error message.
Does anyone know of problems when using SQL7 Server and SQL2000 Client tools when editing and saving DTS Packages ?
My SQL 7 Server doesn't seem to recognise the DTS Package if saved from SQL 2000 Client tools, but works happily with packages saved from SQL7.
Can anyone clarify ?
Hello everybody,
I have the SQL 6.5 client tools installed on my machine, I also have MSDE installed. However the client tools do not see the MSDE. I keep getting the error message that I have attached to this message as a gif. Anybody have any ideas it would be appreciated.
Hello,
I am trying to install the SQL Server 2000 client tools on my XP desktop and after the install I get the erroe message:
Snap-in failed to initialize
when I launch the enterprise console.
I applied service pack 3a but I get the exact same error.
Any one know how I can fix this?
Thanks!
Dear friends,
dts and bcp works with client tools? is export and import is nothing but DTS or something other is there?
thankyou very much.
I have installed SQL 2005 on a new machine and cannot find any of theclient tools I am used to having: query analyzer, enterprise mgr.,profiler. Shouldn't they be included in a default installation if Ichose to install client tools? Where do I go to find them?*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies View Related