I am trying to set up the email notification system in SQL server 2000, but im having some problems. Mainly, im having problems with setting up an email account in the first place (there is a dedicated mail box, but the one im working with is a different box altogether).
If anyone could help fathom this out from start to finish i would be really grateful.
within sql server management studio... we have set up a few sql scripts to run at 2am every night (sql server agent > under jobs)... although it has been successful each night, we'd like to setup sql server agent to automatically email success and failure notifications to our email boxes.
i see under the properties of sql server agent > jobs > properties of a job > there is section that says Notifications but then it doesnt really have a place to type in which email we want to send them to? some reading material or instructions greatly appreciated
Hi,
My name is Vinh, I am a new bee in SQL Server 2005. I am using template script (see below) from SQL Server to create account but when I am right click in database mail for testing email and I got the message, could not connect to mail server.
Below I am trying to use smtp to connect but I know in my company we are using Exchange Mail Server. will that make a lot different?
Please help me,
Thank you very much,
sp_configure 'database mail xps', 1
GO
reconfigure
GO
-------------------------------------------------------------
-- Database Mail Simple Configuration Template.
--
-- This template creates a Database Mail profile, an SMTP account and
-- associates the account to the profile.
-- The template does not grant access to the new profile for
-- any database principals. Use msdb.dbo.sysmail_add_principalprofile
-- to grant access to the new profile for users who are not
-- members of sysadmin.
-------------------------------------------------------------
DECLARE @profile_name sysname,
@account_name sysname,
@SMTP_servername sysname,
@email_address NVARCHAR(128),
@display_name NVARCHAR(128);
-- Profile name. Replace with the name for your profile
SET @profile_name = 'TestProfile';
-- Account information. Replace with the information for your account.
SET @account_name = 'vdang';
SET @SMTP_servername = 'smtp.cgdnow.com';
SET @email_address = 'vdang@cdgnow.com';
SET @display_name = 'Vinh, Dang';
-- Verify the specified account and profile do not already exist.
IF EXISTS (SELECT * FROM msdb.dbo.sysmail_profile WHERE name = @profile_name)
BEGIN
RAISERROR('The specified Database Mail profile (<profile_name,sysname,SampleProfile>) already exists.', 16, 1);
GOTO done;
END;
IF EXISTS (SELECT * FROM msdb.dbo.sysmail_account WHERE name = @account_name )
BEGIN
RAISERROR('The specified Database Mail account (<account_name,sysname,SampleAccount>) already exists.', 16, 1) ;
GOTO done;
END;
-- Start a transaction before adding the account and the profile
BEGIN TRANSACTION ;
DECLARE @rv INT;
-- Add the account
EXECUTE @rv=msdb.dbo.sysmail_add_account_sp
@account_name = @account_name,
@email_address = @email_address,
@display_name = @display_name,
@mailserver_name = @SMTP_servername;
IF @rv<>0
BEGIN
RAISERROR('Failed to create the specified Database Mail account (<account_name,sysname,SampleAccount>).', 16, 1) ;
GOTO done;
END
-- Add the profile
EXECUTE @rv=msdb.dbo.sysmail_add_profile_sp
@profile_name = @profile_name ;
IF @rv<>0
BEGIN
RAISERROR('Failed to create the specified Database Mail profile (<profile_name,sysname,SampleProfile>).', 16, 1);
ROLLBACK TRANSACTION;
GOTO done;
END;
-- Associate the account with the profile.
EXECUTE @rv=msdb.dbo.sysmail_add_profileaccount_sp
@profile_name = @profile_name,
@account_name = @account_name,
@sequence_number = 1 ;
IF @rv<>0
BEGIN
RAISERROR('Failed to associate the speficied profile with the specified account (<account_name,sysname,SampleAccount>).', 16, 1) ;
ROLLBACK TRANSACTION;
GOTO done;
END;
COMMIT TRANSACTION;
done:
GO
Hi,
I need a help from you all on Sending Email on some specific event from SQL SERVER 2005. Any Idea how Do I proceed?
Any help will be appreciated.....
Thanks,
Rahul Jha
Does anyone know if there is any software available that notifies specified people when an error above a certian level occurs. Im thinking along the lines of email and text message.
Im running sql server 2k at sp3a level, and the software will have to be compatible with it so as to get the event notification to pass the information on.
If there isn't any software, would anyone know of any scripts that will do this?
Hi
I have a simple question regarding event notification in sql 2005. I keep up getting a message indicating a syntax error when trying to execute the following script. I also tried with [ instead of '.
CREATE EVENT NOTIFICATION NotifyCT
ON DATABASE
FOR CREATE_TABLE
TO SERVICE 'NotifyService'
Msg 102, Level 15, State 1, Line 4
Incorrect syntax near 'NotifyService'.
I cannot find any error in my syntax. Please help
Thanks
Hello Remus,
I have implemented Event Notification sample you provided in my logic, but I am perplexed that even though my watched queue does go down, I do not get message in the Event_Collector queue all the time. The Event_Collector queue does stay enabled though. Any thoughts? I guess any suggestions on debugging the event notification portion would be helpful.
Lubomir
I would like to propagate an event signal to an external applicationwhen a table in my MSSql2000 server is updated.Prog A; I have an external application adding records to a table.Prog B; I have another external application using this table as well.When Prog A creates a new record in the Table, how can I have Prog B benotified of the event without polling the table or creating a linkbetween Prog A and Prog B.Thanks.
View 2 Replies View RelatedIf I call ExecuteNonQuery() in a timer event callback in a console application, it hangs. Why is that?
.B ekiM
class Program
{
static SqlConnection conn = new SqlConnection("Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=NONEOFYOURBISUINESS;Data Source=localhost");
static void Main(string[] args)
{
NativeMethods.MEMORYSTATUSEX mem = new NativeMethods.MEMORYSTATUSEX();
NativeMethods.GlobalMemoryStatusEx(mem);
Console.WriteLine("{0} bytes", mem.ullAvailPhys);
System.Timers.Timer aTimer = new System.Timers.Timer();
// Set the Interval to 2 seconds (2000 milliseconds).
aTimer.Interval = 1000;
aTimer.Enabled = true;
// Hook up the Elapsed event for the timer.
aTimer.Elapsed += new ElapsedEventHandler(OnTimedEvent);
Console.ReadLine();
}
private static void OnTimedEvent(object source, ElapsedEventArgs e)
{
NativeMethods.MEMORYSTATUSEX mem = new NativeMethods.MEMORYSTATUSEX();
NativeMethods.GlobalMemoryStatusEx(mem);
SqlCommand cmd = new SqlCommand(
"INSERT INTO Observation (StatisticType, StatisticObserved, StatisticValue) VALUES (1, @When, @AvailPhys);" +
"INSERT INTO Observation (StatisticType, StatisticObserved, StatisticValue) VALUES (2, @When, @AvailPageFile);" +
"INSERT INTO Observation (StatisticType, StatisticObserved, StatisticValue) VALUES (3, @When, @AvailVirtual);" +
"INSERT INTO Observation (StatisticType, StatisticObserved, StatisticValue) VALUES (4, @When, @AvailExtendedVirtual);");
DateTime dt = DateTime.Now;
cmd.Parameters.AddWithValue("AvailPhys", mem.ullAvailPhys);
cmd.Parameters.AddWithValue("AvailPageFile", mem.ullAvailPageFile);
cmd.Parameters.AddWithValue("AvailVirtual", mem.ullAvailVirtual);
cmd.Parameters.AddWithValue("AvailExtendedVirtual", mem.ullAvailExtendedVirtual);
cmd.Parameters.AddWithValue("When", dt);
cmd.ExecuteNonQuery();
Console.WriteLine("Inserted {0}", dt);
}
}
Hello,
I have configured an Event Notification for BROKER_QUEUE_DISABLED.
I created a Queue different from the one the Receive my normal messages and on this queue I define an activation.
The Activated SP takes the [EventNotification] message and execute a
RAISEERROR('Message',0,1) WITH LOG.
The error is properly logged in the SQL server event log but I gave a look the Initiator and target sys.conversation_endpoints catalog view and I have see the the conversations are in the status CONVERSING or SI ...
Do I have to call the END CONVERSATION after the commit or these statuses are caused by some mistakes on the message process workflow?
Thank you
Marina B.
Hello,
Can anyone spot what i am missing here ? The problem is that i am getting a null object for e.TextData in the t_OnEvent(object sender, TraceEventArgs e) function below. I am trying to get event- notifications while processing the data mining structure.
thanks
anil
//-------------code below-------------------------------------
using Microsoft.AnalysisServices;
private void ProcessMiningStructure(MiningStructure mStruct)
{
Trace t;
TraceEvent e;
t = server.Traces.Add();
e = t.Events.Add(TraceEventClass.ProgressReportCurrent);
e.Columns.Add(TraceColumn.TextData);
t.OnEvent += new TraceEventHandler(t_OnEvent);
t.Update();
try
{
t.Start();
mStruct.Process(ProcessType.ProcessFull);
t.Stop();
}
catch (Exception ex)
{
}
t.Drop();
}
//------------------------------------------------------
void t_OnEvent(object sender, TraceEventArgs e)
{
SetText(e.TextData);
}
//------------------------------------------------------
MSDE 2000? Thanks.
View 2 Replies View RelatedCan you send these to a group of DBA's
View 1 Replies View RelatedHow can I set up the notification email when one of your jobs got failed using Database mail..
I've already set up the database mail ... but I am not quite sure how to use the database mail to send a notification when a job failed...
I need to set up an automatic email notification. Right now, I have a subscription that is working. The subscription runs a report and puts the resulting pdf into a folder. I need a way to notify users (preferrably in an Outlook distribution list) when the pdf is created. I'm amazed that this basic feature is not built into the subscription capabilities.
Can anyone please tell me how to best accomplish this? I'm familiar with vb.net if that helps.
Thank you very much.
Hi
I am unable to drop the above login. The error is Error:15141 The server principal owns an event notification and cannot be dropped.
I have looked in the table sys.server_event_notifications and there are rows returned that have a server_principal_id of the user I am trying to drop. No events have been created on this server, so I am assuming these notifications are either created by default or are somehow related to Database Mail?
All the event notifications belong to service name "SQL/Notifications/ProcessWMIEventProviderNotification/v1.0" and begin with SQLWEP (i.e. SQLWEP_RECHECK_SUBSCRIPTIONS, SQLWEP_B415ADB8_A604_4057_976F_600002FA5AF6). How can I find out what these are for and how they were created?
What purpose do these event notifications have? Is there some syntax to change the owner of these event notifications so I can successfully drop the login? If the only way is to directly update the system view, is this safe and what repercussions could this have?
Thanks
Martin
Hello
i am new to sqlserver 2000.i have list of email id in a table. need to fetch that emailid and send mail to the appropriate id's.any body knows how to write job schedule for this task.Ideas are welcome
This sends a success or fail status and length of execution time can it be extended to send error details when it fails
View 1 Replies View RelatedIs there a handy-dandy way for me to be able, from a stored procedure, to capture the notification email address for a user associated with a job?
I need to send an email out from a stored procedure, and I want it to be set up to send to the same user that is set up in the job that calls the stored procedure.
the same notification stored proc will be used in multiple jobs, but the jobs are already set up with a notification email to be sent to the defined users "on completion" (error or not). I want a separate email to be sent, but I want to use xp_Sendmail because I have to perform a select who's output I want to appear in the body of the email (and unless I am missing something, I have no control over the body of the standard "job completion" email).
I would prefer to NOT have to "hard code" the user email address in the stored proc that calls xp_sendmail, OR to put it in some user table in the database, when the user I want to send it to will always be the same one defined in at the JOB level in Enterprise Manager.
Any thoughts? Thanks in advance for your instantaneous and informative answer-packed responses! ;)
I have created a trigger like this below:
CREATE TRIGGER TriggerName ON Table_Name AFTER INSERT AS
DECLARE @SERVICE varchar(40)
DECLARE @STATUS varchar(3)
SET @SERVICE=(SELECT [SERVICE] FROM inserted)
SET @STATUS=(SELECT [STATUS] FROM inserted)
[Code] ....
When I added some a new record to Table_Name with Status='X' nothing happened. I have tried to exec only script below:
EXEC msdb.dbo.sp_send_dbmail @recipients=N'moj_adres', @body= 'test', @subject = 'Subject!!!!', @profile_name = 'profil'
and I received email notification.
Hi All
I just wondered that now SQL Mail is classed as a legacy solution for email, does anyone know how to set up Notification Services to send email once a job has completed e.g. Backup or reindex?
I have tried to find a tutorial but with no joy so far!
Thanks
Gopher
Hi,
I want to setup a SMTP using gmail. How to configure it, it says,
In your email client software, under Outgoing mail, set the SMTP server to smtp.gmail.com.
Set the your username is yourgooglemailname@gmail.com and make sure "Use username and password" is checked.
Also check off "TLS" under "Use secure connection."
I tried to do this in code:
Dim htmlMessage As MailMessage
Dim mySmtpClient As SmtpClient
htmlMessage = New MailMessage(From, SendTo, Subject, Body)
htmlMessage.IsBodyHtml = IsBodyHTML
mySmtpClient = New SmtpClient(Server)
Dim myCred As New System.Net.NetworkCredential("myemail@gmail.com", "mypassword") 'CredentialCache
mySmtpClient.UseDefaultCredentials = False 'Credentials = System.Net.CredentialCache.DefaultNetworkCredentials
mySmtpClient.Credentials = myCred
mySmtpClient.Send(htmlMessage)
however, i cannot do the turning off of TLS in code. I'm often prompted with this error once i run:
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.0 Must issue a STARTTLS command first
Anyone who knows how to do this?
cherriesh
Good morning,
I have a strange problem with a scheduled task failing with the following:
"Unable to send completion notification email to operator with email name '' for task 2780, 'Scheduled Update'"
This job is the same across several servers and the job runs on the other servers. This is a bit frustrating... I cannot seem to find the difference that is causing the problem.
The funny thing is that I am not using SQLMail or anything to notify anyone regardless if the job succeeds or fails.
Any pointers?
Thanks much,
Don
is it possible? Thanks.
View 1 Replies View Related
I am in process of setting up job failure notification and one of the requirements that I have is to send notification to multiple users. I would appreciate any suggestion. One of the possible ways would be to create some sort of group account on exchange server with all users added as members. Is there anyway though where I could use users' individual accounts and based on that forward notification to them?
Thanks
We are maintaining a database of drivers, and we are looking for a script or procedure that will automatically notify certain users of the list of drivers who are in need of a recheck or driver's license has expired.
I am new to this , so any help you can give would be greatly appreciated
Hi,
I want to include the running time (Start Time and End Time) of the Package in my script task that sends out an email after job completion.
How do I get the start time and end time?
thanks a lot
cherriesh
I'm using SQL with an Access form for the front end. Is there anyway to have an email sent on the trigger of an event within the form? I'm not sure where to even begin.
View 4 Replies View RelatedI receive the following error when trying to invoke xp_sendmail 'xp_sendmail: failed with mail error 0x80070005'. However, for alert notifications the email works fine. SQL is using an alias account to send mail. This account doesn't have any funny characters. Any ideas why the alert system works but xp_sendmail does not? The invokation of xp_sendmail is being done by SA.
Thanks.
I have a query which sends email notification of count of pending name and suggested name.. on a daily basis. So this works fine but now I want like if the pending and suggested are ' o count' I don't want the email notification. It should not send an email, if it is o count, but if we have the number for pending and suggested this email should be sent.
View 8 Replies View RelatedI want to create data driven subscription via Email for SSRS report.
To do so i can add my self either in To or CC.
I don't want multiple mails in my inbox as sent mails have excel as attachment, but I want notification for all the mails sent.
I have included the Send email task and sending email from SSIS package on Error event.
But for an error I am receiving multiple atleast 10-15 email generated. i got only 2 emails with revelant error message and other email gives message like "
Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown."
I have included ''@[System::ErrorDescription]' as an email attachment.
Is there any way to get only specific relevant error email.
Please suggest
We have (running SQL 2012 Std) and have enabled trace flag 1204 and 1222 for capturing deadlock through extended events. I have enabled deadlock notification through email .But it only send deadlock event occurred notification from the sql server error log . I was wondering if its possible to email the deadlock details they get generated in extended events via DB mail.
View 1 Replies View Related