SQL Server Express 2005 Warning Message In Event Log From SQL Browser Service
May 1, 2007
Hello,
I have been trying to drill down to the cause for this event log message:
"The configuration of the AdminConnectionTCP protocol in the SQL instance
SQLEXPRESS is not valid."
It is reported from the SQLBrowser service as a warning when the service
starts. I have tried starting SQLBrowser.exe with -c flag, but the output reveals no
errors. I have seen this error on three computers. Two are running SQL 2000, 2005
and Express. One was only running Express, but still this message.
I then looked into the log for the SQL Express server itself. It shows this
message on startup:
"Dedicated administrator connection support was not started because it is
not available on this edition of SQL Server. This is an informational message
only. No user action is required."
Now, it appears to me that these two messages may relate to the same
"error" (or rather behaviour by design). So, can anyone confirm that the
warning in the event log from the SQL Browser service occurs becuase of that
the SQL Express edition doesn't allow any "AdminConnection", but the SQL
Browser service isn't aware of that SQL Express edition shouldn't support that, and
reports it as a warning (implying that we can't do much about this warning)?
Thanks for any input on this issue!
View 5 Replies
ADVERTISEMENT
Jun 7, 2001
Hi
Can anyone tell me what this warning message in the Quotes below...
I get this on one of our servers every 15 minutes in the event Viewer..
Here is the message in the event Viewer..
"Replication of license information failed because the License Logging Service on server PSNJRPDC could not be contacted."
Thanks All,
Venu
View 1 Replies
View Related
Dec 14, 2007
Please assist, the issue with SQL 2005 Browser and SQL 2000 Server Service is understood.
Our problem is with networked 2000 instances and SQL Express. The SQL 2000 machines (Standard & MSDE) do not have SQL 2005 or Express installed only 2000. When a SQL Express computer is put on the network with the SQL Browser service running almost all SQL 2000 machines lose sight of the other SQL 2000 instances. The second the
SQL Browser is turned off on the SQL Express box the SQL 2000 machines can see each others instances.
It appears that the response from the SQL Express SQL Browser causes the SQL 2000 machine to stop listening for responses. Once in a while one of the SQL 2000 instances will show up with the SQL Browser active on the network and it is my belief that it is because that response made it in before the SQL browser response. Please help as this does not appear to be a recognized issue. I'm assuming there aren't many sites running as many named instances on individual machines like we do.
Please note this appears to be a problem with SQL Express Browser not SQL 2005 Standard's which runs without problems on our network.
THANK YOU!
View 1 Replies
View Related
May 10, 2007
"Warning: Null value is eliminated by an aggregate or other SET operation."
i keep having this message while having some joint statement.
is there a way to prevent this or even hide this message?
View 3 Replies
View Related
Apr 3, 2007
Ok guys, I am trying to install Sql server 2005 on Vista but I am still stuck with this warning message in the System Configuration Check during Sql server 2K5 installation :
SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Now, I know I need to install SP2 but how the hell I am going to install SP2 if Sql server 2005 doesn't install any of the components including Sql server Database services, Analysus services, Reporting integration services( only the workstation component is available for installation)?
Any work around for this issue?
P.S.: I didn't install VS.NET 2005 yet, can this solve the problem?
Thanks.
View 8 Replies
View Related
Sep 6, 2007
I read an MSDN article that states the following.
SQL Server Browser listens on a UDP port and accepts unauthenticated requests using SQL Server Resolution Protocol (SSRP). SQL Server Browser should be run in the security context of a low-privileged user to minimize exposure to a malicious attack. By default, SQL Server Browser starts using the Local System account. The logon account can be changed by using the Windows Services program. The minimum user rights for SQL Server Browser are as follows:
* Deny access to this computer from the network.
* Deny logon locally.
* Deny logon as a batch job.
* Deny logon through Terminal Services.
* Log on as a service.
* Read and write the SQL Server registry keys related to network communication (ports and pipes).
In our case the SQL Server Browser service is running under the same Windows account as our other SQL Server services. Do you recommend creating a separate Windows account for the SQL Server Browser service as described above?
Can you help me understand how an attack can occur?
Thanks, Dave
View 1 Replies
View Related
Apr 27, 2006
SSIS doesn`t start after applying SQL Server 2005 SP1
I get an error Message in event log
event id 7000 source: Service Control Manager Type: Error
Message:
The SQL Server Integration Services service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
regards
Lothar Belle
View 4 Replies
View Related
Dec 14, 2007
The problem can be seen in Enterprise Manager for 2000 (all service packs), Service Manager for MSDE (2000 all service packs), and OSQL (2000 all versions).
The exact problem is as follows:
In a network environment if SQL EXPRESS (problem does not occurr with 2005 Standard) is installed using defaults
SQL 2000 & MSDE machines will no longer see instances. This is a browser issue for 2000 and MSDE. For some reason the response back to the 2000 machine from the EXPRESS machine causes the 2000 machine to stop listening for reponses.
If you have a network with SQL 2000/MSDE machines that have named instances (default instance is not affected) they will lose sight of eachother when a SQL EXPRESS box is put on the network with its SQL browser service running. We have tried service pack 3a and 4 on the 2000 boxes and it does not resolve the issue. It may resolve issues with 2005 and 2000 on the same machine but this problem is with networked machines and doesn't appear to be the same issue. The SQL EXPRESS machine will be able to see all the
named instances from the 2000 boxes and the 2000 machines usually will only see the EXPRESS named instance until the EXPRESS box SQL Browser service is stopped.
No word from Microsoft so far.
DOES ANYONE HAVE A SIMILAR ENVIRONMENT AND RUN INTO A SIMILAR ISSUE?
View 1 Replies
View Related
Mar 28, 2001
Event Id: 8, Source: SQLCTR60
Type: error, Catagory: None,
DB-Library error - unexpected EOF from SQL server. Conection broken.
View 2 Replies
View Related
Jan 24, 2007
- COM Plus Catalog Requirement (Warning)
Messages
COM Plus Catalog Requirement
If SQL Server Setup fails, Setup will roll back the installation but may not remove all .manifest files. The workaround is to rename the files and then rerun Setup. For more information, see How to: Work Around COM+ Check Failure in SQL Server Setup.
Workaround says remove the .manifest files. Where are they?
SETUP CONTINUES TO FAIL
View 11 Replies
View Related
Jan 17, 2003
18275 :
Unnamed tape (Family ID: 0xcfb8a96c, sequence 1) dismounted from tape drive ‘master tape backup’.
this also happens for the mounted part also, how do I name a tape drive? or stop these warnings in the event logs?
thanks for your help
View 1 Replies
View Related
Apr 28, 2006
I have configured an instance to use static port, say 1435, and I turned off the Browser service.
I would like to know if I can use SSMSE to connect to the instance database directly. The instance is listening at port 1435 and accepting connection requests from other methods.
What I need to put into the "Server name: " field?
Normally, it would be like: <serverIP><InstanceID> with Browser turned on.
Now how do I add the port information to it, I tried
<serverIP>:<portNumber><InstanceID>
<serverIP><InstanceID>:<portNumber>
<serverIP><InstanceID> <portNumber>
None of them worked.
Any suggestions?
Thanks.
View 4 Replies
View Related
May 14, 2006
I just finished installing SQL Server 2005 Express including the Toolkit.
During installtaion I selected instance name as SQLExpress.
I cannot start SQLServer nor SQL Browser services and reports Event ID 7000 with a message Path not found.
Although, the entire installation ran error free. I am running Winodws XP Professional w/SP2 and up-to date patches. Please help!
yaj
View 4 Replies
View Related
Sep 11, 2007
I need help! When installing SQL Server 2005 Express on one machine, I get an error with the following summary.txt
Machine : xxx
Product: MSXML 6.0 Parser
Product version: 6,10,1129,0
Installed: Failed.
Log file: c:Program Files... (see below)
Error Number: 1625
in log file from above.
MainEngineThread is returning 1625
This installation is forbidden by system policy. Contact your system administrator.
The person trying to install has administration privileges. BTW: The computer shares a wireless internet connection with other computers in the office but the clients or not setup to share data. My user is installing SQL, the data, and app on a single client. The MS Sql Server 2005 express seems to install on all other boxes. Thanks for your time.
Zone: SQL Server 2005
View 8 Replies
View Related
Feb 8, 2007
Hi All,
I am using SQL Server Express to connect to the network using VPN on a local machine. I have done the following..
a.) Enabled the remote connections for the Express Instance and rebooted the machine.
b.) Connected to the machine with Express Edition locally and can also connect other SQL Server instances from it to verify connectivity.
c.) Yes, SQL Browser Service is running.
d.) Firewall is not turned on, so I do not have to configure any exceptions.
Now here is the big problem: When I browse for SQL Servers on the network the machine does not show up on the list, i.e "macinenameSQLExpress". I had uninstalled and reinstalled the Express edition and rebooted the machine several times with no luck on the SQL Express Instance showing up on the browser list. I even changed the default instance name to "machinenameMACHINE1" on one of the reinstalls. However, I can connect to other SQL Instances from it. But, I cannot connect to it from other machines since its not registered on the network. I have been working on this for the past few days by looking for a solution via this and other forumns. Is there some setting somewhere that I am missing that prevents this instance from not showing up on the browser list. This issue with SQL Express Edition is baffling as well as frustrating and any ideas that can resolve this issue is very much appreciated.
View 15 Replies
View Related
Jan 4, 2005
I downloaded Web Matrix. Very nice. My VB experience makes this very intuitive. But I see in order to do dB development, I also need to download MS SQL, which is labeled MSDE in as step 3 in the Web Matrix download operation. As I follow the link forward I see that there are three distinct components:
Sql2kasp3.exe
Sql2kdesksp3.exe
Sql2ksp3.exe
Are all three of these required?
Also I see there is a beta version of the SQL Server 2005 Express Edition: http://lab.msdn.microsoft.com/express/sql/ here. Would this be a viable alternative.
View 1 Replies
View Related
Jan 18, 2008
Hello All:
On my backup server running Symantec BackupExec 11D, I wanted to install Service Pack 2 for SQL Server 2005 Express. I started performing the update using "Windows Update", but cancelled the upgrade process just before it started to install (right after the downloading/verifying download phase of Windows update).
Now when I try to find the SP2 update using Windows Update, it doesnt show up on the update website. Rebooting the server doesnt help. I manually downloaded the file for SQL 2005 Express SP2 and tried installing it, but it says "the component is already installed" and I have to exit the process.
BackupExec 11D is running fine as of now, and it might not face problems later.. but I am not sure. Is there any way to uninstall SP2 and re-install it again!??
Any guidance/pointers is greatly appreciated!
Thanks a lot in advance.
View 6 Replies
View Related
Feb 25, 2004
I use VB 6.0 with ADO 2.6 to access an SQL-server.
I know that the table I wish to create generates this warning.
But from today ( without any changes to the SQL-server ) , this warning is reported as an error to the client instead of continuing.
So my error trap routine traps this as an error now.
I have a workaround that I would to avoid and that's reinstalling the SQL-server ( Only the MSSQL ).
Does anybody know a better solution.
PS : Changing the table structure is not possible in this case.
Thnx in advance,
Sven Peeters
Belgium
View 2 Replies
View Related
Jul 23, 2005
Hi,I have a few create table statements which create temporary tablesthat has row definitions which exceeds the 8060 size limit, this causesa warning message being generated (Message 1708).Is there a way I can disable/avoid the warning message from beingprinted ?Thanks,joe
View 2 Replies
View Related
Oct 25, 2006
Hello
I generate a report (.RDL) using Business Intelligence studio and then deploy it.
This deploys sucessfully (see below)
------ Deploy started: Project: Report Project5, Configuration: Debug ------
Deploying to http://localhost/ReportServer$SQLExpress
Deploying report '/Report Project5/Report1'.
Deploy complete -- 0 errors, 0 warnings
========== Build: 1 succeeded or up-to-date, 0 failed, 0 skipped ==========
========== Deploy: 1 succeeded, 0 failed, 0 skipped ==========
When i try to view in IE browser I am required to enter credentials. I enter Admin user and password but this does not work - not authorized to view page.
Looked in IIS -> ReportServer$SQLExpress and would have expected to see report here or in Pages folder. It is not there!
Any help appreciated
View 1 Replies
View Related
Jun 22, 2007
In the last step of installing the SQL Server 2005 Express edition I get the following error:
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:38:35 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:38:35 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
---- Context -----------------------------------------------
Do_sqlScript
SqlScriptHlpr
Start service MSSQL$SQLEXPRESS
Error Code: 1814
MSI (s) (80!08) [19:39:58:265]: Product: Microsoft SQL Server 2005 Express Edition -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
The error is (1814) The specified resource name cannot be found in the image file.
.
<Func Name='GetCAContext'>
<EndFunc Name='GetCAContext' Return='T' GetLastError='203'>
Doing Action: Do_sqlScript
PerfTime Start: Do_sqlScript : Thu Jun 21 19:39:58 2007
Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:39:58 2007
Service failed unexpectedly (1814)
Error Code: 0x80070716 (1814)
Windows Error Text: The specified resource name cannot be found in the image file.
Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
Function Name: sqlservicetart
Source Line Number: 301
Any idea how I can fix this?
View 1 Replies
View Related
Jun 27, 2001
We are seeing the following error message in our SQL logs and was hoping for some advice.
"Warning: the available page file space has dropped below 4 MB"
To fix the problem we thought we should increase our paging file size for our virtual memory on the server. The recommended allocation was 3083 MB and previously we were using less than the recommended amount so we allocated 7167 MB (the max we were allowed). Do you see any problems with this or have any recommendations?
View 4 Replies
View Related
Apr 9, 2008
I'm getting the following error message
[rsNonAggregateInMatrixCell] The Value expression for the textbox €˜IMAGE_TOTAL_1€™ references a field outside an aggregate function. Value expressions in matrix cells should be aggregates, to allow for subtotaling.
the cell it is refering to is in the data area of a matrix.
The value expression is =sum(Fields!IMAGE_TOTAL.Value,"MAIN")
this cell also has a navigation set to "job to a report"
When i take out the navigation the warning messages go away.
Is there an issue with using navigation link on a textbox with an aggregate in it?
ps - everything runs fine I just get a warning message.
View 3 Replies
View Related
Apr 30, 2008
Hello!
We deploy an application that uses SQL Server Express 2005. One of our test engineers tried to use our setup on Windows XP SP 3. But the SQL server installer gave an error - unable to update msxml6r.dll. Is this a bug of the SQL Server installer or do we need to make use of a more recent version of msxml6?
View 46 Replies
View Related
Nov 22, 2007
I am continually prompted to download & install this SP by the windows update utility but it always fails to install it.
I have XP SP2. No error msg is provided. I do not have ACT! installed. I do have Oracle 10g Expr. Ed installed. Competitive jealousy?
I found this online:
Important notes about the cumulative hotfix package
€¢ You must enable the SQL Server Management Object (SMO) extended stored
procedures and the SQL Server Distributed Management Object (SQL-DMO)
extended stored procedures before you install the cumulative hotfix package.
Where does one enable SMO & SQL-DMO?
I looked in the summary log file in the Hotfix directory and it says that the problem is
that SQL Express cant be started. See below.
I went into the SQL Configuration Mgr and tried to start it and it fails to start.
No reason given. Now what?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Time: 11/22/2007 09:44:37.546
KB Number: KB921896
Machine: TOSHIBA-ROGER
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
/quiet
/allinstances
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Express Database Services (SQLEXPRESS) ENU RTM 2005.090.1399.00 x86 EXPRESS
Express Database Services (SQLExpress) ENU RTM x86 EXPRESS
**********************************************************************************
Products Disqualified & Reason
Product Reason
Express Database Services (SQLEXPRESS) Unable to start service
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Express Database Services (SQLEXPRESS)
Product Version (Previous): 1399
Product Version (Final) :
Status : Not Applied
Log File :
SQL Express Features : SQL_Data_Files,SQL_Engine,SQL_Replication,SQL_SharedTools
Error Number : 11042
Error Description : Unable to start service
----------------------------------------------------------------------------------
Product : Express Database Services (SQLExpress)
Product Version (Previous):
Product Version (Final) :
Status : Not Applied
Log File :
SQL Express Features : Client_Components,Connectivity,SDK
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
Unable to start service
Exit Code Returned: 11042
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
View 4 Replies
View Related
Mar 16, 2007
Windows Update Web Page indicates I have BOTH a
SUCCESS and FAILURE for
SQL Server 2005 Microsoft SQL Server 2005 Express Edition Service Pack 2 (KB 921896)
?Is it possible for my machine to have TWO DIFFERENT MS SQL Server Express installations? Is the problem real or some small ghost issue?
I do have a trial CD from Microsoft .. Visual Studio 2005 Team Suite.
Please note that this is what windows update indicates on the web page
duplicate lines are on the web page .. not a copy and paste mistake.
SQL Server 2005 Microsoft SQL Server 2005 Express Edition Service Pack 2 (KB 921896) Tuesday, March 13, 2007 Microsoft Update
SQL Server 2005 Microsoft SQL Server 2005 Express Edition Service Pack 2 (KB 921896) Tuesday, March 13, 2007 Microsoft Update
LINK FOLLOWED
Installation Failure
Error Code: 0x652
Try to install the update again, or request help from one of the following resources
I include the logfile since it seems to convey useful informations to SQL Express experienced.
summary.txt logfile
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Time: 03/13/2007 12:28:02.906
KB Number: KB921896
Machine: somejunk
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
/quiet
/allinstances
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Express Database Services (SQLEXPRESS) ENU SP2 2005.090.3042.00 x86 EXPRESS
Express Database Services (SQLExpress) ENU RTM x86 EXPRESS
**********************************************************************************
Products Disqualified & Reason
Product Reason
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Express Database Services (SQLEXPRESS)
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
SQL Express Features : SQL_Data_Files,SQL_Engine,SQL_Replication,SQL_SharedTools
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Express Database Services (SQLExpress)
Product Version (Previous):
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9Express_Hotfix_KB921896_SQLEXPR.EXE
SQL Express Features : Client_Components,Connectivity,SDK
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
Success
Exit Code Returned: 0
View 21 Replies
View Related
Apr 16, 2007
Hi -
Who else had received this error during Windows update? I'm running Vista ultimate. There are a couple of posts on google, but no solutions yet.
View 26 Replies
View Related
May 19, 2007
Hi i tried to install the Microsoft SQL Server 2005 Express Edition Service Pack 2 but was unable to do so. I got an error message saying: Error Code: 0x2B22
I went through what the message said, but i was unable to solve the problem. Below is the summary of the problem. Please help me solve it.
Time: 05/19/2007 12:32:24.781
KB Number: KB921896
Machine: DET-NB0631262
OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
/quiet
/allinstances
Cluster Installation: No
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Express Database Services (SQLEXPRESS) ENU RTM 2005.090.1399.00 x86 EXPRESS
Express Database Services (SQLExpress) ENU SP2 x86 EXPRESS
**********************************************************************************
Products Disqualified & Reason
Product Reason
Express Database Services (SQLEXPRESS) Unable to start service
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
**********************************************************************************
Product Installation Status
Product : Express Database Services (SQLEXPRESS)
Product Version (Previous): 1399
Product Version (Final) :
Status : Not Applied
Log File :
SQL Express Features : SQL_Data_Files,SQL_Engine,SQL_Replication,SQL_SharedTools
Error Number : 11042
Error Description : Unable to start service
----------------------------------------------------------------------------------
Product : Express Database Services (SQLExpress)
Product Version (Previous):
Product Version (Final) :
Status : Not Applied
Log File :
SQL Express Features : Client_Components,Connectivity,SDK
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
Unable to start service
Exit Code Returned: 11042
View 3 Replies
View Related
Feb 11, 2008
When updating automaticallly, this update always fail, I have put the configuration manager /server browser : the only one that was disabled, on manual (I have not the automatic option for this one) but nothing works, what can I do ? This is a new laptop I have got (XP pro) and I am going through the process of updating many things, only this one fails, any help appreciated.
View 5 Replies
View Related
Mar 23, 2007
Using VS05 Pro SP1 with the SQL version below...
From the Windows update site and also via automatic download of updates, the following update fails every time...The SQL it is trying to update works fine.
The following updates were not installed:
Microsoft SQL Server 2005 Express Edition with Advanced Services Service Pack 2 (KB 921896)
Any idea what the problems are?
Thanks, Bob
View 7 Replies
View Related
Aug 9, 2007
Q1: Any way to control which db loads when, and perhaps stop this error from happening? Again- when all is said and done, the report server functions, and I am able to access just fine.
Q2: What kind of recovery is being referred to? Given the message type- I assume it's nothing of concern- probably more to do with a system that doesn't run all the time.
Okay- so I get these two event messages each time I boot.
Below are two error message I see daily with each system boot- the services mentioned do "actually" function, and are running- as not 10 seconds after these messages are logged, the successfully loaded messages appear. It's almost as if report services tries to connect before the databases are up and running.
Basically the sequence (today) was:
1. 05:49:01 Failure Audit (MSSQL$SQLEXPRESS)
2. 05:49:01 Error (Report Server Windows Service (SQLEXPRESS)
3. 05:49:02 Recovery is complete. (EventID 3408 MSSQL$SQLEXPRESS)
4. 05:49:06 Starting up database 'ReportServer'
5. 05:49:09 Server Resumed execution (MSSQL$SQLEXPRESS)
I'm assuming based on the events that Report Server Service attempts to connect to the ReportServer database before it's actually started. Doesn't really explain the failure audit-
1. Failure Audit:
Event Type: Failure Audit
Event Source: MSSQL$SQLEXPRESS
Event Category: (4)
Event ID: 18456
Date: 8/9/2007
Time: 05:49:01
User: <MACHINENAME><LOCALUSER>
Computer: <MACHINENAME>
Description:
Login failed for user '<MACHINENAME><LOCALUSER>'.
[CLIENT: <local machine>]
This is almost immediately followed by this (which I consider a no-brainer, considering the above):
2. Error:
Event Type: Error
Event Source: Report Server Windows Service (SQLEXPRESS)
Event Category: Management
Event ID: 107
Date: 8/9/2007
Time: 05:49:01
User: N/A
Computer: <MACHINENAME>
Description:
Report Server Windows Service (SQLEXPRESS) cannot connect to the report server database.
View 1 Replies
View Related
Mar 27, 2008
I've been trying to install the following update: Microsoft SQL Server 2005 Express Edition Service Pack 2 (KB 921896). I always recieve the following error: 2B22,
Please advise on a fix for this.
Regards,
View 5 Replies
View Related
Jul 9, 2006
Hi there,
I have only this warning message during the System Configuration Check:
ASP.Net Version Registration Requirement (Warning)
Messages
ASP.Net Version Registration Requirement
64-bit ASP.Net is Registered. Required 32-bit ASP.Net to install Microsoft Reporting Services 2005(32-bit).
Does this mean that I can't install Reporting Services or should I pay no attention to it and continue to install?
I'm running on Windows 64-bit Pro. edition.
Thanks,
Eric
View 24 Replies
View Related
