SQL Server Integration Services Script Task Has Encountered A Problem And Needs To Close
Jul 3, 2007
I am unable to debug the first Script Task (not Script Component) since adding a second Script Task in one of my packages. The script completes successfully and goes green but the above error is displayed followed by another which is not mentioned here as I'm sure it's because of the first error. The second script task debugs fine so I know this is not the problem. But if I delete the second Script Task the first task starts debugging.
I have moved the breakpoint around in the first script and the only line that seems to work is the first line within the main method. It's irrelevant what this first line of code does. I know there is nothing wrong with the script tasks themselves as I have an exact copy in another package that debugs just fine.
Hi,since yesterday I have this message everytime I try to open Sql Server"Enterprise manager"; I reinstalled the outfit completely without successany solutionthanksFernand
In short, does the €œTransfer SQL Server Objects Task€? support distributed transactions?
In trying to use a €œTransfer SQL Server Objects Task€? in a container using a transaction on the container. The task is set to support the transaction. It is setup to copy table data from several tables from a non-domain server (sql server 2000) to a domain-based server (sql server 2005). I get an error stating, €œThis task can not participate in a transaction€?.
I am wondering if it means exactly what it says €“ this task in SSIS can€™t participate at all. Or does it mean that it won€™t in this scenario for some reason. I attempted a simple copy of data from mssql 2005 to mssql 2005 (same server) and the task still failed). MSDTC appears to be running properly on my machine and such (I can do a simple distributed transaction across linked server to the 2000 server in Query Analyzer (QA)). Also, MSDTC appears to be working on both servers with distributed transaction query tests in QA.
Here€™s the error info€¦
SSIS package "Development BusinessContacts and Products Migration.dtsx" starting. Information: 0x4001100A at Copy BusinessContacts Data: Starting distributed transaction for this container. Error: 0xC002F319 at Copy BusinessContacts database table data 1, Transfer SQL Server Objects Task: This task can not participate in a transaction. Task failed: Copy BusinessContacts database table data 1 Information: 0x4001100C at Copy BusinessContacts database table data 1: Aborting the current distributed transaction. Information: 0x4001100C at Copy BusinessContacts Data: Aborting the current distributed transaction. SSIS package "Development BusinessContacts and Products Migration.dtsx" finished: Failure. The program '[4700] Development BusinessContacts and Products Migration.dtsx: DTS' has exited with code 0 (0x0).
I'm a SQL Server 2000 user trying to get my head around v2005, in particular the changes from DTS to Integration Services.
I've build a few packages in BIDS and they work fine there, but saving them to either the file system or MSDB locations and running them in Management Studio results in:
Execute Package Utility has encountered a problem and needs to close. We are sorry for the inconvenience.
If I click on the debug button, I get this:
An unhandled exception ('System.IO.FileNotFoundException') occurred in DTExecUI.exe [404].
I've searched the Internet and found a few people who has also experienced this, but not received any answers.
Is there a kind guru out there with some idea of what is going on? Preferably something that doesn't involve re-installing, because the database has already been configured for our Blackberry users and I can't re-do it now.
Using "Integration Services Project" template in Business Intelligence Studio. Using platforms Visual Studio 2005 along with SQL Server 2005.
Getting the error while trying to execute package after loading it programmaticaly.
I've just one task "Transfer SQL Server Objects Task" on my Integration Services package. But when I try to execute it from VS 2005 project programmaticaly, it gives the above mentioned error.
The commands I use:
Package pkg = new Package();
pkg = a.LoadPackage(@"C:Documents and SettingsabcMy DocumentsVisual Studio 2005ProjectslSSISSSISPackage.dtsx", null, true);
DTSExecResult dResult = pkg.Execute();
The the error comes like: error: 0xc0012024 The task Transfer SQL Server Objects Task cannot run on this edition of Integration Services. It requires higher level edition.
I has created a SSIS FTP Task Programatically for Receiving Files. I have written code for Transfering data from FTP to my local machine. it is working fine. i need to log the details of the file transferred like file name, file size it to database table.
can any one help me to solve this...... its very urgent please.....
Hi guys, I 've been trying to run an integration services package as server agent scheduled task so that I dont have to manually execute the package every 2 hours. I was following how to guide in msdn to set up a server agant task for integration services package but I'm kind a lost. First of all when I ran the Management Studio and connected to the integration services the server agent does not show up it only shows me runing and stored packages. I can access to the server agent when I connect to the database engine but when I create a task and try to add a step to open a integration services package it does not give me the choice in type box. I couldn't figure out the problem. Is there a way to enable server agent to run under integration services too (not just under database engine) if databse engine is the only place server agents works , why dont I see the option to open a ssis package at adding a step to tasks? or is there a way to automate the process to run the package automatically without using the server agent at all?
Thanks, Burak
PS I was following the http://msdn2.microsoft.com/en-us/library/ms139805.aspx article
I have created a FTP task in SSISÂ to upload file to the server. Due to some policy issues we do not have the actual password with us. we have been provided with a encrypted password. Hence I am not able to connect to the server through the FTP task connection manager. Is there a way to connect to the server and send file using the encrypted password, so that we don't require the actual password to run the process successfully?
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
We are using sql server 2005 Enterprise Edition with service pack1
I got the following error messages in the SQL log
The operating system returned error 21(The device is not ready.) to SQL Server during a read at offset 0x00000000090000 in file '....mdf'. Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online. fcb::close-flush: Operating system error 21(The device is not ready.) encountered.
I got these errors for about 2 hrs and after that I see these messages in the sql log
Starting up database ' ' 1 transactions rolled forward in database '' (). This is an informational message only. No user action is required. 0 transactions rolled back in database ' ' (). This is an informational message only. No user action is required. Recovery is writing a checkpoint in database ' ' ( ). This is an informational message only. No user action is required. CHECKDB for database '' finished without errors on (local time). This is an informational message only; no user action is required.
Can anyone please help me in troubleshooting this issue. Why this migh have happened.
I have a developer here that created an SSIS package that contains a Send Mail Task. When this developer runs the package in the Business Intelligence Development Studio (BIDS) the send mail task runs without issue. But when he tries to run it using command line and the DTEXEC program it errors out with the following error message:
Error: 2007-08-01 15:57:44.37
Code: 0xC0012024
Source: Send Mail Task
Description: The task "Send Mail Task" cannot run on this edition of Integration Services. It requires a higher level edition.
End Error
Warning: 2007-08-01 15:57:44.37
Code: 0x80019002
Source: ELMSFeed
Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:57:24 PM
Finished: 3:57:44 PM
Elapsed: 19.922 seconds
Here are the details of his machine: Visual Studio 2005 Version: 8.0.50727.762 (SP.050727-7600)
Under the Installed Products section it reads: SQL Server Integration Services version: 9.00.3042.00
Once we promoted the package to a production server it runs fine. I can also run the same package from my machine without issue. So, I'm pretty sure that it's specific to his machine, but I have no idea where to start looking.
Email    | CC_Flag xxxx          0 yyyy          1 zzzz          1
Using Task SQL, I am trying to pass these email addresses to two separate variables - To_field, Cc_field on basis of the CC_Flag..Is it possible to fill two variables from a single SQl Task,.
Executing the FTP Task - The execution starts and after 3 or more minuts the execution stops with the RED X but with no errors, and the file is not transferred.I use the same entries to the FTP connection manager as it is for the Dreamweaver...The variable that I created for file in the site is FileName1 and the site directory tree is The local path is And The File Transfer is filled up like this: After the Execution stops I get..And the file was not transfered..Also, when I try to Specify the Variable Expretion.
I have a SSIS 2014 project that is being deployed to the 2014 SSIS catalog. In one of the packages there is a script task that uses an ftp connection manager within the package.
There is structured error handling in the script and it runs fine in development, but fails when deployed and scheduled to a SQL Server agent job. The error that is being returned isn't permissions of authentication failure, but returns as the task times out. The package and project use encryption by password.
I have a Send Mail task as part of a validation process in a OnPostExecute event handler. All tasks preceding the Send Mail task get triggered and show green check mark next to them, but, for some reason, Send Mail task never gets one.
I checked the Execution Results tab and it doesn't show any indication of Send Mail task executing as a final step.
I checked the SMTP server configuration and did some test using localhost. I'm able to send as configured while using anonymous credentials.
I have a situation where i need to unpivot multiple columns using ssis. The data looks like
Name Age products1 products2 orders1 orders2 abc     23   cycle       radio         12        24 as Name  Age Products  orders abc    23     cycle      12 abc   23      radio      24
Is it possible to do this using the unpivot task in ssisMy actual data is has 18 columns which needed to be unpivoted into one and another 18 into another one.when using unpivot task it gives an error saying only one pivotvalue key is allowed.
I need to create excel workbook "SalesData.xlsx', which should have worksheet "POS". After creating excel file in specific location, script should be able to format cells as well.For instance, first two column type should be numbers. Here are the columns:
ColumnName : Type Id : Number AccountNumber : Number Name: Text Address: Text
Also, it checks for existing file . If it exist, then overwrite the file.
This is for SSIS 2008r2. I am generating flat files successfully with a datetime stamp (filename_yyyymmddhhmm). Now I need to append a MAX(FILEDATE) from the file. I have a query to do this, but am not sure about two things:
1) Is it advised to put the query in a Script Task (with db conn and so forth) or is it better to put it in an Execute SQL Task? I am thinking the latter but am not 100% sure.
2) How would I pass the result of this query (yyyymm) to the filename. The filename format would be (filename_yyyymm). I am assuming that I would probably need to pass the result into a variable/expression but am not quite sure of the steps involved.
I was given the following code for use in a Script Task, but it is written in C#: Â Â Â Â Â Â Â Â Â Â Â Â Company.File.ACH.NACHA file = new Company.File.ACH.NACHA(126, @"Data Source=SERVERSAND;Initial Catalog=Database;Persist Security Info=True;User ID=ID;password=pswd;"); Â Â Â Â Â Â Â Â Â Â Â file.Create(); Â Â Â Â Â Â Â Â Â Â Â FileInfo t = new FileInfo("C:/newfile.txt");Â Â Â Â Â Â Â Â Â Â Â StreamWriter Tex = t.CreateText(); Â Â Â Â Â Â Â Â Â Â Â //byte[] bytearraye = file.OutputArray; Â Â Â Â Â Â Â Â Â Â Â Tex.WriteLine(file.ToString());Â Â Â Â Â Â Â Â Â Â Â Tex.Close(); Â I've tried to convert this to vb.net for use in a Script Task, but I'm doing something wrong.
We have Sequence generator (Next Value) enabled for surrogate keys (SQL Server 2012). When we use the new SCD task, we get the following error:
[Insert Destination [42]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "NEXT VALUE FOR function cannot be used if ROWCOUNT option has been set, or the query contains TOP or OFFSET. ".
Is there any know issue that these two features [SCD task and Next Value]Â cannot be used together?
We are using an OLE DB Source for the Data Flow Source and OLE DB Destination for the Data Flow Destination. The amount of data being moved is about 30 million rows, and it is gather using a sql command. There is not other transformations in between straight from one to another. The flow starts amazingly fast but after 5 million rows it slows considerably. Wondered if anyone has experienced anything similar with large loads.
I am setting the 'To' field in the Send Email task using an expression in the expression textbox because the email address is received from a variable.But the taks throws error, as the 'To' field in the task is empty and only the expresssion field is filled. Is there any workaround ?
I have an SSIS package which calls a command line app.When run in BIDS, it executes normally. The command line app is passed the arguments, does what it needs to do.When called as a SQL Agent Job (by the agent, or by me) it fails when calling the app, giving an exit code of 2 (which is an exception trapped by a try-catch). The SQL Agent service is running under my user (it's a test environment). The argument passed (from the log) is valid, and I've run it against the app, it provides the appropriate output.I can't for the life of me figure out what's going wrong.The app is passed an argument of a path and a password, and applies the password to the file, using interop.
I able to send mail with HTML body format using script task, but i am not able to send more than one recipients with the below code:
/*   Microsoft SQL Server Integration Services Script Task   Write scripts using Microsoft Visual C# 2008.   The ScriptMain is the entry point class of the script. */ using System; using System.IO; using System.Data; using Microsoft.SqlServer.Dts.Runtime;
I can set almost all properties of FTP task and FTP connection manager using expressions option. In that option, I don't see that I can set FTP PASSWORD using a variable. How do I set the password dynamically?
I would like to store the file properties like (title, created by , created time, modified time) and load in to a audit table along with file name. I know how to design this process inside a foreach lookup with script task and execute sql task.
I'm trying to achieve this by editing my existing code which captures the most recent file based on its file properties.Â
public void Main() { // TODO: Add your code here var directory = new DirectoryInfo(Dts.Variables["User::Csv_Source"].Value.ToString()); FileInfo[] files = directory.GetFiles("*.csv"); DateTime lastModified = DateTime.MinValue;
