Hi all,
I have SQL Server in NT 4.0 which has two IP addresses. How to force the SQL Server to listen to specific IP address ? We can make client to listen to specific port & IP and let me know the way to configure SQL Server to listen only to specific port that will make to ensure that SQL Server can be communicated throught that specific port.
Your answer would be highly appreciated.
regards,
Nana
Hi all,
I'm working on a school project on web and mobile applications, and had decided to use MS SQL Server for my backend database.
However, after I've installed MS SQL Server 2000, I ran a port scan and I couldn't find the server running on any ports (MySQL is running on my port 3306, but I guess it doesn't matter) Can something drop some hints on how to debug the problem?
I'm running on Athlon XP 2000+ w/ Windows XP Professional SP2
Thanks a lot!
Hi. I'm a SQL Server novice, so apologies if any of this sounds simple.I am running Windows XP SP2, and have just installed SQLServer 2000. Ineed another application to connect to SQLServer, and am specifying itto do so via localhost:1433, but keep getting an error whenever I trydoing so saying it cannot connect to the database. A colleague of minehas the exact same set up on his machine, and he can connect to SQLServer fine. Running 'netstat -a' at the command line on his machinereveals that the system is listening to port 1433/ms-sql-s. Runningnetstat on my machine shows that the system is not listening to1433/ms-sql-ms. I have checked in Network Config in SQLServerEnterprise Manager, and TCP/IP is set to be using 1433.To confirm this, my application can connect over the network to mycolleague's SQL Server. but he cannot connect over the network to mine.So I'm pretty sure the issue is related to this 1433/ms-sql-s problem.Does anyone know how to resolve this? Many thanks.
View 1 Replies View RelatedI have a named sql instance on SQL 2012. The issue is that the clients is having problem connecting to it when the firewall is on, this is not consistent. The connection is fine when I disabled the firewall. When I turned the Windows firewall back on, it will work for awhile and it fails. I checked the SQL configuration manager and saw that a dynamic port is assigned to the named instance. I did put that in the firewall rule and unblock it. I also put TCP 1433 and 1434 as well as the browser service port, TCPUDP 2382 and it still didn't work.What is the best way to determine what port does the named instance are listening?
View 11 Replies View RelatedSetting: sql 2000 default instance installed. Installed a sql 2005 named instance.
I want to configure the sql 2005 instance to listen on a partcular TCP port. (I followed the instructions in KB article 177440.)
"SQL Config Manager" > Protocols for "Instance" > Right-click TCP/IP > Properties, I found about 5 IP addresses and an "IPALL" address (pretty good for a home machine with one NIC!).
Per the article, I removed the 0 from TCP Dynamic Ports and put the desired port number ("4567") in the port value, restarted the sql instance, and found this using "xp_readerrorlog" this:
......
.....
Server is listening on [ 'any' <ipv6> 4567].
Server is listening on [ 'any' <ipv4> 4567].
.....
.....
Server is listening on [ ::1 <ipv6> 49277].
Server is listening on [ 127.0.0.1 <ipv4> 49277].
It looks like my instance is now listening on the desired port (success) but also, still, using a dynamic port. Did I do something wrong or can the dynamic port simply not be eliminated?
TIA,
Barkingdog
I'm trying to configure a named instances of SQL Server 2012 SP2 to have specific IP addresses and listen to that IP on port 1433. Alongside this, I have the default instance running on a different IP and listening to that on port 1433.I've managed to get them configured so that they are reachable using the IP, and looking at the log for each they are listening correctly on that IP on port 1433; in addition, the default instance connects fine using the SERVERNAME.However, when I try and connect to the named instance using the SERVERNAME/INSTANCENAME syntax, I receive the following:-
"Cannot connect to SERVERINSTANCE.
Instance failure. (System.Data)"
Configuration for the TCP/IP protocol for that instance is as follows:-
Protocol Tab
Enabled= Yes
Keep Alive = 30000
Listen All = No
IP addresses Tab
IP1
Active = Yes
Enabled = Yes
IP Address = 10.1.1.1
TCP Dynamic Ports = 0
TCP Port = 1433
[code]...
The SQL Browser service is running and prior to switching off Listen To All, I could connect to the instance remotely using the instance name.
Is there any windows API available to find the IP address on which the process is listening.
Want to find the IP address on which SQL Server is listening.
Hi, folks!
My server machine have 2 ip address (Private and real), but my sql server is just listening on the first one and the default 127.0.0.1
What Can I do to resolve that?
Please, Any idea would be really apreciate a lot!
TIA.
Armando
Cti, Miami
I am running SQL Server 2000 on windows XP pro. I have configured (enabled) TCP/IP protocol and left the default port 1433, but SQL server still does does not listen for client connections.
Can anyone tell me what might stop SQL server from listening???
With the server running, here is what I see (nothing on 1433...):
Proto Local Address Foreign Address State
TCP 0.0.0.0:25 0.0.0.0:0 LISTENING
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1025 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1030 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1031 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1098 0.0.0.0:0 LISTENING
TCP 0.0.0.0:6401 0.0.0.0:0 LISTENING
TCP 0.0.0.0:10002 0.0.0.0:0 LISTENING
TCP 127.0.0.1:1034 0.0.0.0:0 LISTENING
TCP 127.0.0.1:1037 0.0.0.0:0 LISTENING
TCP 192.168.0.104:139 0.0.0.0:0 LISTENING
TCP 192.168.0.104:1138 38.119.97.5:119 ESTABLISHED
UDP 0.0.0.0:445 *:*
UDP 0.0.0.0:500 *:*
UDP 0.0.0.0:1027 *:*
UDP 0.0.0.0:3456 *:*
UDP 0.0.0.0:4500 *:*
UDP 127.0.0.1:123 *:*
UDP 127.0.0.1:1900 *:*
UDP 192.168.0.104:123 *:*
UDP 192.168.0.104:137 *:*
UDP 192.168.0.104:138 *:*
UDP 192.168.0.104:1900 *:*
and here is the server log:
2005-10-25 23:23:24.31 server Microsoft SQL Server 2000 - 8.00.194 (Intel X86)
Aug 6 2000 00:57:48
Copyright (c) 1988-2000 Microsoft Corporation
Personal Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
2005-10-25 23:23:24.31 server Copyright (C) 1988-2000 Microsoft Corporation.
2005-10-25 23:23:24.31 server All rights reserved.
2005-10-25 23:23:24.31 server Server Process ID is 3792.
2005-10-25 23:23:24.31 server Logging SQL Server messages in file 'c:MS SQL ServerMSSQLlogERRORLOG'.
2005-10-25 23:23:24.34 server SQL Server is starting at priority class 'normal'(2 CPUs detected).
2005-10-25 23:23:24.71 server SQL Server configured for thread mode processing.
2005-10-25 23:23:24.71 server Using dynamic lock allocation. [500] Lock Blocks, [1000] Lock Owner Blocks.
2005-10-25 23:23:24.74 spid3 Starting up database 'master'.
2005-10-25 23:23:24.92 server Using 'SSNETLIB.DLL' version '8.0.194'.
2005-10-25 23:23:24.92 spid5 Starting up database 'model'.
2005-10-25 23:23:24.96 spid3 Server name is 'GS-DELL'.
2005-10-25 23:23:24.96 spid3 Skipping startup of clean database id 4
2005-10-25 23:23:24.96 spid3 Skipping startup of clean database id 5
2005-10-25 23:23:24.96 spid3 Skipping startup of clean database id 6
2005-10-25 23:23:24.96 spid3 Skipping startup of clean database id 7
2005-10-25 23:23:25.10 spid5 Clearing tempdb database.
2005-10-25 23:23:25.28 server SQL server listening on Shared Memory, Named Pipes, Rpc.
2005-10-25 23:23:25.28 server SQL Server is ready for client connections
2005-10-25 23:23:25.59 spid5 Starting up database 'tempdb'.
2005-10-25 23:23:25.71 spid3 Recovery complete.
2005-10-25 23:23:40.37 spid51 Using 'xpstar.dll' version '2000.80.194' to execute extended stored procedure 'xp_MSADEnabled'.
2005-10-25 23:23:40.71 spid51 Error: 15457, Severity: 0, State: 1
2005-10-25 23:23:40.71 spid51 Configuration option 'show advanced options' changed from 1 to 1. Run the RECONFIGURE statement to install..
2005-10-25 23:23:40.89 spid51 Using 'xplog70.dll' version '2000.80.194' to execute extended stored procedure 'xp_msver'.
2005-10-25 23:23:40.93 spid51 Starting up database 'msdb'.
2005-10-25 23:24:54.20 spid51 Starting up database 'gpldb'.
2005-10-25 23:24:54.26 spid51 Analysis of database 'gpldb' (7) is 100% complete (approximately 0 more seconds)
2005-10-25 23:24:54.46 spid51 Starting up database 'Northwind'.
2005-10-25 23:24:54.60 spid51 Starting up database 'pubs'.
We have a "main" SQL 2014 server who imports XML files using SSIS in a datacenter. In remote sites (which are warehouses), there is an instance of SQL 2014 Express. A merge replication is setup, as every operations done on each site must be "forwared" to the main database, as some XML files are generated as output for an ERP system.
Now, the merge replication replicate all the data to the server on each sites. But a specific site don't need the data of every other sites, only the data relevant to itself (which is the warehouse code). Is there a way to replicate only the data relevant to each individual sites to the subscribers? Or is there a better way than replication to accomplish this?
How let SQL 7 listening on 0.0.0.0:1433? We are using Windows Server 2003 Standard and SQL 7 Standard.
Thanks.
Hello,
I have an installation of SQL Server Express 2005 installed on a Windows 2003 server. Through the forums on the board I have been able to turn on and make sure that port 1433 and port 1434 are turned on and listening. However, both ports show that they are listening on IP address 0.0.0.0. and I need for port 1433 to either listen on the server's main IP address or at the very least on 127.0.0.1. I have set them to enabled in the Configuration manager but they still don't appear to be listening on either of those IP addresses. Could some one tell me if there's another configuration change I might need to make?
Thank you in advance.
One of my production SQL Server 2000 systems is listening on TCP and Named Pipes, but not on Shared Memory.
This server has a lot of scheduled jobs that are internal to this box. I assume these jobs would benefit from using shared memory instead of TCP/IP, but I can't figure out why it doesn't use shared memory already and how to correct that.
Thanks in advance for all assistance.
i setup a 2 node sql cluster but 1433 is not listening. I check sql configuration manager and entered 1433 for all ip addresses restarted services but still not 1433
View 14 Replies View RelatedI have been using Sql server Reporting services 2000 and i never had these
problems
I tried firing up my Sql server Reporting services 2005 today i went
through the reporting services conf manager
and then got to the "database setup" stage and bingo can't get through this
error below
* On my PC i have Reporting services 2000 and Reporting services 2005 installed and my
is working ok
ReportServicesConfigUI.WMIProvider.WMIProviderException: An error occurred
when attempting to connect to the report server remote procedure call (RPC)
end point. Verify that the Report Server Windows service is running, and
then retry the operation.
---> System.Runtime.InteropServices.COMException (0x800706B3): The RPC
server is not listening. (Exception from HRESULT: 0x800706B3)
--- End of inner exception stack trace ---
at
ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.ThrowOnError(ManagementBaseObject
mo)
at
ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.ListReportServersInDatabase(RSReportServerInfo[]&
serverInfos)
Looked for some info and got a hint here at:
http://blogs.msdn.com/bimusings/archive/2005/08/23/455263.aspx
But still can't get it to fox it..
Also with the Encription Keys i anytine i try to delete it BINGO again i
get the error above..
These error has been given people nigtmares and it isn't new does anyone
know the fix for this error..
Hope someone from Microsoft could help
Hi,
Could anyone tell me how the data can be ported from informix to sql server ?
Is there a way to run the informix query from sql server ?
Thanks,
Vijay.
Hello. I'm a novice with SQL Server. I set up a SQL Server instance using Enterprise Manager and I want to find out what port that instance is listening to, because it's not listening to the default.
Is there a way I can specify a port for the server to listen to?
Hello. I'm a novice with SQL Server. I set up a SQL Server instance using Enterprise Manager and I want to find out what port that instance is listening to, because it's not listening to the default.
Everything is on my local machine, this is a development database.
Is there a way I can specify a port for the server to listen to?
Hello!
I have an SQL Server 2000 database at home PC that has several tables and plenty of data in it...also stored procedures.
I want to port all that data so that I can use it at another PC that has SQL Server installed in college.
How to do this?
Thanks in advance!
Lala the don
I have access to the default instance of a SQL Server ..... I have access to the QA only .. by reading the registry through the QA I get to knw that there are additional 4 more instances on the Server ..... is is possible to get the port on which they are listening using the QA ....
I knw that we can go to the servers network utility & see it there in the TCP /IP ... but i dont have access to that , neither do i have access to the error logs that tell me , on which port is SQL Server listening to
Can someone help
Hello All,
We have default instance "MSSQLSERVER" with Port number 1433. We Installed another Instance "MGMT" on the same windows server, it came as same Port number "1433".
We decided to Change the Port number for Instance "MGMT".
1. We changed the port number for "MGMT" to like "1234"
2. After the change we did telnet to "MGMT" Instance with "1433", it worked.
3. Then we changed the Port number for Instance "MSSQLSERVER" also to like "4321".
4. After change of these setting and followed with rules framed in link as said: http://www.databasejournal.com/features/mssql/article.php/3689846
5. Now we did telnet with changed port number, it works fine.
6. We can not do telnet with Port number 1433 for both Instances "MSSQLSERVER" and "MGMT".. This is fine, what we want, and what we intent to do...
Question to MVP OR SQL Gurus:
A) If you want to change port number to Second Instance, shall we need to change for Default Instance?
B) How the port numbers will be configured? please advice.
Thanks, Jay
Hello,
I connect to the SQL Server with RDA method. there was no problem until I had to use a port to access the virtual path of RDA.
it connects when
rda.InternetUrl = http://ip/rdadir/sqlcesa30.dll ,
but no when
rda.InternetUrl = http://ip:81/rdadir/sqlcesa30.dll .
May someone help,please?
Thanks.
I have a server running SQL Server 2005 Dev behind a firewall that blocks the default SQL Server port. So, I changed the port that SQL server uses to another port. How do I connect to the database instance with SQL Server Management Studio. I have tried:
xxx.xxx.xxx.xxxMSSQLSERVER
xxx.xxx.xxx.xxx:portMSSQLSERVER
name.of.machineMSSQLSERVER
On all of these, I get an error 25 - Connection string is not valid. I have the surface area configured correctly (i.e. named pipes and TCP/IP are both turned on), and the sql server browser is running. I can ping the server just fine, and when I go to GRC.com and do a shields up report it lists my port of choice as being open.
What am I missing?
I also set the native client configuration's default port to the port I want to connect to, and it appears that that didn't work either.
Ideas? I would like to get this running ASAP.
Thanks in advance!
I tried creating an alias to the server to get it to connect to analyze the server but it will not recognize the SQL 2000 server as a valid server to analyze. I can use the alias to connect in EM or SSMS. Any ideas? The server is not clustered and is at SP4. I've connected to several others in my environment but this one is causing me grief!
Thanks,
Linda
Hi there,
I want to change the default sql-server port number 1433 to a new one. Can i do that? If yes, how?
Also, i have noticed that there is no port number option in the sql server 2005 management studio login window. So, what if the server has changed its port number?
Any suggestions would be appreciated. thanks
I am unable to access the default port 1433 on my SQL 2003 server. There is no firewall. I run telnet <ip> <port> and get "Connection failed" which explains my inability to connect to the server for weeks. I have being unable to connect to the server after I uninstalled sql 2000 and reinstalled it on my 2003 server. Some of the things I have checked is Network Configuration in EM. Named Pipes and TCP/IP is installed with port set to 1433. HKLMSoftwareMicrosoftMSSQLServerClientSuperSocketNetLibTcpDefaultPort port is set to 1433. Is there anything I need to configure on the server side to have the default sql server port enabled.
Thanks
Thanks for Microsoft's Windows XP Service Pack 2 and Windows Server 2003 that make the security much stronger. However, besides the invisible benefit so far, I have become the victim of this security policy.
I have several named instances of SQL 7/2000 installed in my machine. They are not visible out of the Microsoft new fire wall. I need to access the instances from outside the fire wall, but I don't know which port I should open for the instances.
From SQL online, the default instance of SQL server is connected through TCP/IP by default port 1433. I could successful open that port and made the default instance visible to outside. However, the port 1433 doesn't work for the named instances. SQL online said, the port for named instance is dynamically (by default) chosen the first time the instance is started. So, actually, I have no way to know the port.
Is there anyway that I can check the database or somewhere to get the port that is used by the named instance?
Thanks for any input and recommendation.
I want to know how to check whether SQL Server 2000 can listen to port 1433 or not. If I run netstat -a, am I suppose to see port 1433 regardless of what service pack I have applied to SQL Server 2000?
View 14 Replies View RelatedHow does one check which port SQL Server is listening to? How does one know if it is 1433 or 1434?
View 8 Replies View RelatedI have changed SQL Server from default port to another port number. All appears fine. If SQL Server is restarted it is all fine, however, when the server is restarted SQL Server fails to start. If you then log into the server and manually start the services they start just fine. So, it appears that something blocks the port or uses the port upon server startup for a few seconds. The AV folks say that they are not blocking ports and that it AV service actually starts 15 seconds after the SQL start failure.So, the question becomes is how can I track down what is blocking or using that port?
This is Win2012/SQL2014 CU3
Server failed to listen on xxxxx::xxxxxxxxxx <ipv6> xxxxx. Error: 0x2741. To proceed, notify your system administrator.
Server failed to listen on fe80::5efe:10.255.196.25%18 <ipv6> 14001. Error: 0x2741. To proceed, notify your system administrator.
TDSSNIClient initialization failed with error 0x2741, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. The requested address is not valid in its context.
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
Hi,
Is there any concerns or problems with forward a port to SQL server
from our internet firewall so that you can access the databases over the internet? Is it a standard practice to do this in order to remotely access the SQL server. Or is there a better way to do this? Also, if it is ok to do this are any things you need to do to enhance your security from vulnerabilities being open to the internet.
Any suggestions or comments would be appreciated on this subject.
Thanks
When I change the tcp/ip port to anything other than 1433 my SSIS nor DTS packages run successfully. Does the tcp/ip port have to be on 1433 for the SSIS or DTS packages to run successfully?
View 3 Replies View RelatedHi,
I have SQL Server 2000 installed on my Windows XP (SP2) machine. I have the port set to 1433 (under Server Network Utility-->General-->TCP/IP). Here's the problem: when i run
netstat -anb
nothing is running on port 1433. What i DO have is this:
TCP 0.0.0.0:1036 0.0.0.0:0 LISTENING
[sqlservr.exe]
Before I rebooted my computer it was running on port 1032. Anyone have any idea why this is happening? Thanks.