SQL Server MSDE2000 Problems...
Feb 25, 2008
Hi there,
I'm having some trouble with my MSDE2000 (version 8.00.194) and I'd appreciate any insight you could provide...
Long story short, I'm not sure what went wrong, but after stopping my SQL server to change DBs, it wouldn't start again. On the server, it showed no errors. In my services list, it said something along the lines of 'This service has no actions to perform, and so will not start'. It was a few days back, so I forget the exact message...
After restarting my PC, the service started without any errors, but my ODBC Connections will not find my SQL server. I get the following messages with the following scenarios:
Server: (local) : SQL server does not exist or access denied.
Server: . : Specified SQL server not found.
Server: 127.0.0.1 : Login failed for user <username>.
Server: <PC name> : Login failed for user <username>.
I have come across a similar issue before, where re-installing the MSDE sorted it out, this time however, I cannot uninstall the desktop engine: simply shows 'An error has occured during the installation' and nothing else after that. I also cannot apply any service packs, I get the same message as above. I have also tried upgrading to MSDE2005 (using company CDs on my PC at work), to be told that the installation has been blocked due to the following software: 'MSDE2000 8.00.194'.
For the record, I have also installed SP3 for Win XP... Not sure if that might be the issue? I somehow doubt it though. I tried a system restore to the day before the problem started, and it is still doing the same after a successful restore.
Help?!? Please? I need an SQL server for my work software to function correctly, I work in a busy call centre and I cannot get this fixed myself. I'm on the brink of formatting with a fresh install if XP.
Regards,
Andre.
View 6 Replies
ADVERTISEMENT
Mar 12, 2004
Can't connect from Win XPpro to named instance nor default instance on server running MSDE2000 SP3 via LAN (WORKGROUP). Works fine from Win 2K in the same network. Attached screen shot of error message. Osql gives the same response.
View 2 Replies
View Related
Jul 26, 2006
I am aware that instances of both can exist on the same machine.
But I assume that is when a different instance of SQL Server Express is installed with an existing instance of MSDE2000
Many moons ago, when the various flavours and betas of SQL Express became available, I upgraded from MSDE2000 - didn't think I would need it again.
I now have an application, Sony Vegas 6, which uses MSDE2000 for it's Media Manager. According to their support it won't install to SQL Server Express 2005.
When I try to install MSDE2000, it always fails with "Setup failerd to configure server..." and rolls back.
In the event log, there is an entry
The description for Event ID ( 19011 ) in Source ( MSSQL$SONY_MEDIAMGR )
cannot be found. The local computer may not have the necessary registry
information or message DLL files to display messages from a remote
computer. You may be able to use the /AUXSOURCE= flag to retrieve this
description; see Help and Support for details. The following
information is part of the event: (SpnRegister) : Error 1355.
I have down all the usual things like uninstalling SQL Server Express 2005 (using control panel and msiexec /x {GUID}), patching the registry etc etc
The result is always the same.
The Sony Media Manager is not important and I probably won't use it but it's annoying the hell out of me - I've always claimed, over a good few years, that there was no computer problem that I couldn't finally solve, but presently this has got me beat and I feel undone!!!!!!! :-)
regards
Stuart
www.mckears.com
View 3 Replies
View Related
Sep 21, 2004
How do I add login user ASPNET to my SQL 2000 Desktop Engine Server?. I can not find the "Server Manager" in the Start - Programs. Is there any other way to get around adding ASPNET login to the SQL server so I can test my VB program. I got the error: Login failed for user 'com_nameASPNET'.
View 1 Replies
View Related
Aug 26, 2004
Hi,
I've been trying to follow Microsoft's instructions on installing MSDE2000 for Visual Studio. I do instancename=VSDOTNET SECURITY=SQL SAPWD=XXXX and all that. When I reboot, I notice that I have no services in the SQL Service Manager, nor can it find my computername.
Anybody know why this is?
View 1 Replies
View Related
May 23, 2005
hey guys heres my problem iam trying to install SQL server2000 but i keep on running into problems....??
here is what iam having problems with
setup SAPWD="AStrongSAPwd" SECURITYMODE=SQL
it keeps saying the instance name specified is invalid there has to be an easyer way to run the program...??
i have all ready set up an instance name and the SAPWD.
any suggestions?? please help
View 2 Replies
View Related
Sep 11, 2005
Hi,
I have a problem with the database that I created using MSDE 2000 SP4. I tried to attached the database into the new SQL Express using the sp_attach_db and it worked. The message mentioned is that the DB has been upgraded. When I tried to attach back the DB back to my MSDE, it can't be done.
My PC is XP pro SP2. Before I reattach the DB back to MSDE, I detach the DB from my SQL express.
Is it because once the SQL express upgraded the DB, it cannot be supported by MSDE or SQL 2000 ?
Thanks. Any help is greatly appreciated.
View 1 Replies
View Related
Jan 23, 2007
Hi
Im installing MSDE2000 on new Machine Pentium IV LGA Processor HT technology; OS Windows 2000 Professional. Its getting roll Back after some installation.
The same setup if im installing on my other new Machine With Scoket 478 Processor OS Windows2000 Professional. Its installing completly.
Is there any compatibilty problem.
Please Advice me what to do. Thanks In advance
View 2 Replies
View Related
Oct 23, 2006
Ii have installed msde 2000 now all my Access files are in 2000 format how do i change back to 2003?
View 1 Replies
View Related
Apr 20, 2004
looks like a noob question but how can i manage msde2000...i can see sql is runnin but how can i create database , attach/detach database, write functions and so on...
thanx alot for the reply :)
View 2 Replies
View Related
Jun 19, 2007
I have side by side msde2000 and sqlexpress installed. I need to move a db that has been detached from msde2000 and where it works perfectly fine into sql express. After I select the .mdf file to attach I get this error:
TITLE: Microsoft SQL Server Management Studio
------------------------------
Attach database failed for Server 'LTBAHIASQLEXPRESS'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach+database+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
SQL Server detected a logical consistency-based I/O error: torn page (expected signature: 0x55555555; actual signature: 0x55555551). It occurred during a read of page (1:97) in database ID 6 at offset 0x000000000c2000 in file 'C:Memo2005DiaryMEMOinMEMOsql.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Converting database 'MEMOsql' from version 539 to the current version 611.
Database 'MEMOsql' running the upgrade step from version 539 to version 551. (Microsoft SQL Server, Error: 824)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=824&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Thanks for any help,
Luis
View 6 Replies
View Related
Jan 30, 2004
I just downloaded and installed MSDE2000 sp3a for winform and asp.net
quickstart tutorial. But I found it has no sample database such as pubs
and northwind. It used to have these databases. At least in last September
when .Net web Matrix came out.
If this is the case, can someone tell me where to get the sql scripts
to create Northwind database in MSDE?
Becasue the winform tutorial uses this database.
Thanks in advance!
Lei Xu
View 1 Replies
View Related
Oct 12, 2004
hi there,
i have following system:
the MSDN is running on a win98 machine,
the client-applications, which uses the DB are running on winXP.
there are (SOMETIME!) connection problems to the DB, i guess because of
connection timeouts.
unfortunately i can not change the system, i only can change some setting
or install additionally components such as MDAC.
what can i do,
please help me, it is a support case for a customer.
thank you very much.
mik
View 1 Replies
View Related
Mar 12, 2008
Hello !
I have installed msde2000A , but wanted to use Adventure Works database for which I am trying to install sql server express edition 2005 ,
But I want to install it w/o removing earlier msde2000A .
Is it possible.. I was guessing I could install 2 instances .
1st of mase200A and 2nd that of sql express edition 2005.
If it is poss , how to do that ? any other particular procedure / or normal install procedure .
Any one can help ?
Thanks
Bobo
View 2 Replies
View Related
Jul 23, 2005
I attempted to install MSDE on a WinXP machine(server) today. I installedfrom the command prompt as follows:-[color=blue]>setup INSTANCENAME="NetSDK" SECURITYMODE=SQL BLANKSAPWD=1[/color]Before I get 'blasted', I know that I 'really shouldn't' use a blank sa pswdbut.......I did :-)I then detached (sp_detachdb) an existing db from another machine. Moved itonto the new instance and reattached it.Finally, I executed the following scripts:-sp_addlogin @loginame = 'name', @passwd = 'password', @defdb = 'dbName'sp_grantdbaccess 'name'sp_addrolemember 'db_owner', 'name'So, this was fine and I could connect to the new db using either windowsintegrated security or 'name'/'password' BUT..BIG BUT, only at the server.When I tried to connect from a client I received an error message, 'SQLServer Does Not Exist or Access Denied'.I am assuming that all is well with the db and that it is something I havedone...or more probably not done with the sql server instance (as the errorsuggests:-). Can anyone please suggest my error?Thanks
View 3 Replies
View Related
Feb 28, 2008
Hi,
i have a problem when i try to do an inplace update of msde2000 to SQLServer2005Express (adv.).
The following error message is displayed:
SQL Server Setup failed to execute a command for server configuration. The error was [Microsoft]
[SQL Native Client][SQL Server]Incorrect syntax near '='..Refer to the server error logs and Setup logs for detailed error information
Has anyone a suggestion to solve the problem ?
thank you in forward.
BR
Jürgen
View 4 Replies
View Related
Aug 24, 2006
Hi,
Recently when i try to upgrade my current MSDE 2000 (SP3a) to SP4, the system just keep on failing me. Here is the scenario:
1. Download the MSDE2000 SP4 from microsoft
2. Extract the SP4
3. Run the following command in either the command prompt or via a batch file:
echo off
echo "Start to Upgrade MSDE SP4 ... "
setup.exe /UPGRADESP SQLRUN INSTANCENAME=JSNG SECURITYMODE=SQL UPGRADEUSER=sa UPGRADEPWD=Th3B3st /L*v c:MSDE_Log.log
echo "SP4 Upgrade Process completed!"
4. Once the above batch file was runned, the standard SQL configuration screen (gathering information) will be triggered.
5. However after a while the installation will just stopped.
6. When i checked on the log, i have found out that the failure of installation is due to the system has failed to configure the server. PFB for the last few rows of the verbose log:
=== Logging stopped: 8/22/2006 17:36:49 ===
MSI (c) (90:88) [17:36:49:865]: Note: 1: 1729
MSI (c) (90:88) [17:36:49:865]: Product: Microsoft SQL Server Desktop Engine -- Configuration failed.
MSI (c) (90:88) [17:36:49:865]: Grabbed execution mutex.
MSI (c) (90:88) [17:36:49:865]: Cleaning up uninstalled install packages, if any exist
MSI (c) (90:88) [17:36:49:865]: MainEngineThread is returning 1603
=== Verbose logging stopped: 8/22/2006 17:36:49 ===
7. When i check the MSI Installer Event ID at Microsoft site, it just said that this is the server configuration problem and i cant find any solution.
Any forumers here experience the above before? Mind to share some thoughts?
FYI, my current MSDE configuration is as follow:
- MSDE 2000 Release A (SP3a - 8.00.760)
- Installed Instance = JSNG
Thanks.
regards,
JS
View 1 Replies
View Related
May 19, 2006
Has any one had experience with upgrading MSDE2000 with no instance to SQL2005 Express?
Thanks
ZS
View 1 Replies
View Related
Mar 3, 2004
Hi
I am using MS Access project as a frontend and MSDE 2000 as a backend database. I have few users and i want to give every one restricted access to database based on their use.
How can i create user accounts. I checked tools-->Security--> but workgroup admin option is not active. How to solve this puzzle
Thanks in advance
Neha
View 1 Replies
View Related
Oct 11, 2006
I'm trying to install the MSDE2000 on window xp, sp2. During the installing, apperance the percent bar is rolling back, which is not even completed install. I had read the issue from microsoft to restart the server service, and...but no luck. Is there anyone has an ideas.
View 1 Replies
View Related
Apr 12, 2005
My Problems & Situation:Hi! I am a ASP.NET starter. My platform is WinXP Home Edition and I haven't installed any version of SQL server before.I download different version of MSDE and extracted in my C drive separately, including: 1. Microsoft SQL Server 2000 Desktop Engine (MSDE 2000) Release A 2. Microsoft SQL Server 2000 Service Pack 3a (contained MSDE 2000) 3. MSDE 2000 for Developers Using Visual Studio .NETsince all of the above versions have the same problem when I try to install it.
The problem is that when I double click each of the setup.exe, it will show a pop up error:[A strong SA password is requires for security reasons. Please use SAPWD switch to supply the same. Refer to readme for more details. Setup will now exit.]
Then I found a solution from Microsoft, it told me that: 1. Run the setup in the command prompt 2. Locate in the extracted path 3. type --> "Setup.exe /qb+ INSTANCENAME=NetSDK DISABLENETWORKPROTOCOLS=1 SAPWD=<pwd>"
p.s. I have changed the <pwd> to 123abc
However....another Error Occur:1st pop up --> [Unable to determine system default collation.]2nd pop up --> [Microsoft SQL Server Desktop Engine Setup failed.]
My Question:1. Why the error still occour when I type that command to setup? (Solution from Microsoft)2. How can I fix it and complete the installation?3. How many users(maximum) can be created in a MSDE database?
Greateful if anyone can give me hand.
View 3 Replies
View Related
Apr 20, 2007
My server is a dual AMD x64 2.19 GHz with 8 GB RAM running under Windows Server 2003 Enterprise Edition with service pack 1 installed. We have SQL 2000 32-bit Enterprise installed in the default instance. AWE is enabled using Dynamically configured SQL Server memory with 6215 MB minimum memory and 6656 maximum memory settings.
I have now installed, side-by-side, SQL Server 2005 Enterprise Edition in a separate named instance. Everything is running fine but I believe SQL Server2005 could run faster and need to ensure I am giving it plenty of resources. I realize AWE is not needed with SQL Server 2005 and I have seen suggestions to grant the SQL Server account the 'lock pages in memory' rights. This box only runs the SQL 2000 and SQL 2005 server databases and I would like to ensure, if possible, that each is splitting the available memory equally, at least until we can retire SQL Server 2000 next year. Any suggestions?
View 8 Replies
View Related
Aug 10, 2007
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
View 1 Replies
View Related
Aug 10, 2007
Hi,
We have an old machine which holds SQL server 2000 database. We need to migrate a whole database to a new machine which has SQL server 2005.
When we tried to move whole database using Import and Export Wizard, only tables can be selected to import/export. However we want to import/export the whole database, including tables, stored procedure, view, etc. Which tool should we use?
Thanks.
View 5 Replies
View Related
Jun 6, 2007
Hi,
When I am trying to access SQL Server 2000 database from another machine i got this error
Server: MSg 17, Level 16, State 1 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
but I could access the database on same server and in that server i could access other databases in different server.
View 6 Replies
View Related
Feb 13, 2008
When I proposed start to use SQL Server 2005 for new VS 2005 web sites, one of my co-workers responded that
we will update the old SQL Server 2000 databases to SQL Server 2005 when we are ready to use 2005 SQL Server.
Questions:
1. Any expected problems to upgrade old 2000 databases to new 2005 SQL Server?
2. I have installed both 2005/Management Studio Express and 2000/Enterprise Manager in my PC. Any expected
problems when running both 2000 and 2005 SQL Server at the same database server?
3. What is the best configuration for running SQL Server 2005 when we have old 2000 databases? Upgade or not upgrade?
TIA,
Jeffrey
View 4 Replies
View Related
Oct 20, 2007
I am getteing
need help
Query analyzer error Unable to connect server local Msg17, level 16,state 1
ODBC SQL server driver [DBNETLIB]SQL server does not exist
View 6 Replies
View Related
Apr 3, 2008
Hi,
I am having a problem connecting my .net applications from the application server to the database server. When I run the application from my windows xp (sp2) box it works fine. When I try to connect via SQL Management Studio to the database server from the application server I get the same error.
Here is the error:
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is the Environment:
App Server:
Windows Server 2003 Standard Edition
Inside Company's Firewall/ Network
Database Server:
Windows Server 2000 Advanced Edition
SQL Server 2000 SP4
Remote Connections to the Server is checked
Enable Protocols: Named Pipes & TCP/IP
TCP/IP Port: 1402 (I don't know why it isn't the default of 1433)
The db server is sitting out side the Company's firewall (don't ask me why). I can access it fine from inside the firewall on my XP box but not from windows server 2003. There is a web server outside the our network that also connects to the db server with no problem and that is running Windows Server 2003 Web Edition.
I can ping the db server from the app server using the IP address.
I tried using the IP address and the port 1402 in my connection string but that didn't work from any machine (XP and Server).
I imagine the issue is somehow related to the company's firewall but why would it only block Windows Server 2003 and not XP?
What do I tell the network admin to change?
Any help would be appreciated.
Thanks,
Oran
View 4 Replies
View Related
Jan 4, 2013
if you can restore a database to Server B using Server A as the service. Meaning we would issue the command on Server A but somehow point to Server B as where we want the restore to happen.
The backup file would be in a location independent of both servers.
View 4 Replies
View Related
Jul 23, 2005
Dear all,On Win2000 server with SP3, I am trying to access a SQL Server 7.0database, "TestDB", from VB6 via a SQL Server ODBC system DSN using ADO2.7. In SQL Server Enterprise Manager, there is a login named "Tester".In its property window, NO "Server Roles" was assigned but its"Database Access" was set to "TestDB". This login was also made as theuser of "TestDB" with "public", "db_datareader" and "db_datawriter"selected as its "Database role membership". All the tables I am tryingto access in "TestDB" were created under "Tester".My code is like:Set conn = New ADODB.Connectionconn.Open "DSN=TestDSN;UID=Tester;PWD=test"Set cmd = New ADODB.Commandcmd.ActiveConnection = conncmd.CommandText = SQLset rs = cmd.Execute()If I set the SQL to something like "SELECT * FROM tbl_test", I alwaysget an error of "-2147217865" saying "[Microsoft][ODBC SQL ServerDriver][SQL Server] Invalid object name tbl_test". If I set the SQL to"SELECT * FROM Tester.tbl_test", everything runs properly. Could anyoneplease kindly advise why the first SQL is not working? Or in otherwords, why must I prefix the table name with its owner while the DBconnection is already made under that owner name? Thanks in advance.Tracy
View 10 Replies
View Related
Sep 20, 2006
When I try to migrate a database on a SQL Server 2000 server to a SQL Server 2005 server with the Copy Database Wizard of the SQL Server Management Studio, I'm confronted with the following problem;
Performing operation...
- Add log for package (Success)
- Add task for transferring database objects (Success)
- Create package (Success)
- Start SQL Server Agent Job (Success)
- Execute SQL Server Agent Job (Error)
Messages
* The job failed. Check the event log on the destination server for details. (Copy Database Wizard)
When I take a look at 'Event viewer' on the SQL 2005 server, the following error is displayed;
InnerException-->An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005,
this failure may be caused by the fact
that under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I already enabled the MSSQLSERVER network configuration protocols (TCP/IP and Named Pipes ).
How do I solve this problem?
View 9 Replies
View Related
